rtc: rtc-ds1307: use dev_dbg() instead of pr_debug()
PATCH 1/2 rtc: rtc-ds1307: use dev_dbg() instead of pr_debug()
dev_dbg() is more preferred than pr_debug().
Signed-off-by Jingoo Han <[email protected]>
--- drivers/rtc/rtc-ds1307.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-)
drivers/rtc/rtc-ds1307.c +5 -5
@@ -713,7 +713,7 @@ static int ds1307_probe(struct i2c_client *client, tmp = ds1307->read_block_data (ds1307->client,DS1337_REG_CONTROL ,2 , buf);if (tmp !=2 ) { -pr_debug ("read error %d\n" , tmp); +dev_dbg (&client->dev,"read error %d\n" , tmp); err = -EIO ; goto exit_free; }
@@ -752,7 +752,7 @@ static int ds1307_probe(struct i2c_client *client, tmp =i2c_smbus_read_i2c_block_data (ds1307->client,RX8025_REG_CTRL1 <<4 |0x08 ,2 , buf);if (tmp !=2 ) { -pr_debug ("read error %d\n" , tmp); +dev_dbg (&client->dev,"read error %d\n" , tmp); err = -EIO ; goto exit_free; }
@@ -796,7 +796,7 @@ static int ds1307_probe(struct i2c_client *client, tmp =i2c_smbus_read_i2c_block_data (ds1307->client,RX8025_REG_CTRL1 <<4 |0x08 ,2 , buf);if (tmp !=2 ) { -pr_debug ("read error %d\n" , tmp); +dev_dbg (&client->dev,"read error %d\n" , tmp); err = -EIO ; goto exit_free; }
@@ -824,7 +824,7 @@ read_rtc:/* read RTC registers */ tmp = ds1307->read_block_data (ds1307->client, ds1307->offset,8 , buf);if (tmp !=8 ) { -pr_debug ("read error %d\n" , tmp); +dev_dbg (&client->dev,"read error %d\n" , tmp); err = -EIO ; goto exit_free; }
@@ -866,7 +866,7 @@ read_rtc: tmp =i2c_smbus_read_byte_data (client,DS1340_REG_FLAG );if (tmp <0 ) { -pr_debug ("read error %d\n" , tmp); +dev_dbg (&client->dev,"read error %d\n" , tmp); err = -EIO ; goto exit_free; }
Signature · 1 line
1.7.2.5
PATCH 2/2 rtc: rtc-fm3130: use dev_dbg() instead of pr_debug()
dev_dbg() is more preferred than pr_debug().
Signed-off-by Jingoo Han <[email protected]>
--- drivers/rtc/rtc-fm3130.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/rtc/rtc-fm3130.c +1 -1
@@ -395,7 +395,7 @@ static int fm3130_probe(struct i2c_client *client, tmp =i2c_transfer (adapter, fm3130->msg,4 );if (tmp !=4 ) { -pr_debug ("read error %d\n" , tmp); +dev_dbg (&client->dev,"read error %d\n" , tmp); err = -EIO ; goto exit_free; }
Signature · 1 line
1.7.2.5