About PID...???!!!
Hi All,
I have been using linux for quite some time. I wonder how the PID is assigned by the kernel. Is there anything like range of PID for each user? In my machine I could see PIDs of 256, 389, 413 etc. Does this mean that there are almost 413 processes running?
Please explain.....
with regards,
M. SilambuChelvan
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
They are assigned linearly, however once a pid is used, it is never reused until the machine reboots.
A pid of 413 means that when that process was fork()'ed there had been 412 other processes already created. But remember every time you type ls, you've run a process.
413 isn't a large pid at all. My linux box which I very rarely reboot is at PIDs that start at 20000
I'm surprised that any program you start after the boot process is as low as 412.
----- Original Message -----
From: "Silambu Chelvan" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 10, 2003 10:23 AM
Subject: About PID...???!!!
Quoted 13 lines
Hi All,
I have been using linux for quite some time. I wonder how the PID is assigned by the kernel. Is there anything like range of PID for each user? In my machine I could see PIDs of 256, 389, 413 etc. Does this mean that there are almost 413 processes running?
Please explain.....
with regards,
M. SilambuChelvan
Quoted 9 lines
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 2 lines · John T. Williams
They are assigned linearly, however once a pid is used, it is never reused until the machine reboots.
This is not quite correct. The pid assignment process wraps, I *think* at 32767 (or maybe 65535). Next time around, the kernel skips over any pids that are still in use from the last round of assignment.
Quoted 9 lines
A pid of 413 means that when that process was fork()'ed there had been 412 other processes already created. But remember every time you type ls, you've run a process.
413 isn't a large pid at all. My linux box which I very rarely reboot is at PIDs that start at 20000
I'm surprised that any program you start after the boot process is as low as 412.
Whether that is surprising or not depends on what he uses the host for and, naturally, on how recently it was rebooted. While my workstation is way up there (30180), my Linux-based router, which does not start new processes very much, is only at pid 828.
And, of course, there are persistent processes on any Linux host that go back to the boot/init process ... starting with init itself (always pid 1) and including long-lived daemons such as syslogd, klogd, and portmap; pseudo processes that are actually run in the kernel (mostly [k*] process names); and getty proceses listening on VTs that never get logins.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
definitely higher then 2^16, I've got a process with the PID of 69917 I would guess MAX_INT which is 2^32 -1 = 4294967295
----- Original Message -----
From: "Ray Olszewski" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 10, 2003 11:58 AM
Subject: Re: About PID...???!!!
Quoted 2 lines
Quoted 1 line · John T. Williams
They are assigned linearly, however once a pid is used, it is never
reused
Quoted 7 lines
Quoted 1 line
until the machine reboots.
This is not quite correct. The pid assignment process wraps, I *think* at 32767 (or maybe 65535). Next time around, the kernel skips over any pids that are still in use from the last round of assignment.
Quoted 1 line
A pid of 413 means that when that process was fork()'ed there had been
412
Quoted 1 line
Quoted 1 line
other processes already created. But remember every time you type ls,
you've
Quoted 3 lines
Quoted 3 lines
run a process.
413 isn't a large pid at all. My linux box which I very rarely reboot is
at
Quoted 3 lines
Quoted 3 lines
PIDs that start at 20000
I'm surprised that any program you start after the boot process is as low
as
Quoted 3 lines
Quoted 1 line
412.
Whether that is surprising or not depends on what he uses the host for
and,
Quoted 12 lines
naturally, on how recently it was rebooted. While my workstation is way up there (30180), my Linux-based router, which does not start new processes very much, is only at pid 828.
And, of course, there are persistent processes on any Linux host that go back to the boot/init process ... starting with init itself (always pid 1) and including long-lived daemons such as syslogd, klogd, and portmap; pseudo processes that are actually run in the kernel (mostly [k*] process names); and getty proceses listening on VTs that never get logins.
Quoted 5 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
definitely higher then 2^16, I've got a process with the PID of 69917 I would guess MAX_INT which is 2^32 -1 = 4294967295
----- Original Message -----
From: "Ray Olszewski" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 10, 2003 11:58 AM
Subject: Re: About PID...???!!!
Quoted 2 lines
Quoted 1 line · John T. Williams
They are assigned linearly, however once a pid is used, it is never
reused
Quoted 7 lines
Quoted 1 line
until the machine reboots.
This is not quite correct. The pid assignment process wraps, I *think* at 32767 (or maybe 65535). Next time around, the kernel skips over any pids that are still in use from the last round of assignment.
Quoted 1 line
A pid of 413 means that when that process was fork()'ed there had been
412
Quoted 1 line
Quoted 1 line
other processes already created. But remember every time you type ls,
you've
Quoted 3 lines
Quoted 3 lines
run a process.
413 isn't a large pid at all. My linux box which I very rarely reboot is
at
Quoted 3 lines
Quoted 3 lines
PIDs that start at 20000
I'm surprised that any program you start after the boot process is as low
as
Quoted 3 lines
Quoted 1 line
412.
Whether that is surprising or not depends on what he uses the host for
and,
Quoted 12 lines
naturally, on how recently it was rebooted. While my workstation is way up there (30180), my Linux-based router, which does not start new processes very much, is only at pid 828.
And, of course, there are persistent processes on any Linux host that go back to the boot/init process ... starting with init itself (always pid 1) and including long-lived daemons such as syslogd, klogd, and portmap; pseudo processes that are actually run in the kernel (mostly [k*] process names); and getty proceses listening on VTs that never get logins.
Quoted 5 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 2 lines · John T. Williams
definitely higher then 2^16, I've got a process with the PID of 69917 I would guess
MAX_INTwhich is 2^32 -1 = 4294967295
Actually, as it turns out, the right answer is "it depends".
Checking my kernel source, I find that the kernel's fork() routine checks against PID_MAX before wrapping. This value is defined, at least for 2.4.19, in <kernel_source_path>/include/linux/threads.h . My (Debian) kernel source has there
#define PID_MAX 0x8000
which matches my observed wrapping at (or near) 32768 . You might see if your kernel source sets this value higher.
Quoted 7 lines
----- Original Message -----
From: "Ray Olszewski" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 10, 2003 11:58 AM
Subject: Re: About PID...???!!!
Quoted 8 lines
Quoted 2 lines
Quoted 1 line · John T. Williams
They are assigned linearly, however once a pid is used, it is never
reused
Quoted 5 lines
Quoted 1 line
until the machine reboots.
This is not quite correct. The pid assignment process wraps, I *think* at 32767 (or maybe 65535). Next time around, the kernel skips over any pids that are still in use from the last round of assignment.
[...]
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Alright Alright, I concede it does loop, I should have used the word never. I'll change it to rarely and be done with it, in any case I think Silambu got his answer which briefly is:
No PID = 412 doesn't mean there are 412 process currently running on your machine.
Read the man page for ps to learn how to identify processes that are currently running.
----- Original Message -----
From: "John T. Williams" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 10, 2003 2:04 PM
Subject: Re: About PID...???!!!
Quoted 10 lines
definitely higher then 2^16, I've got a process with the PID of 69917 I would guess
MAX_INTwhich is 2^32 -1 = 4294967295----- Original Message -----
From: "Ray Olszewski" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 10, 2003 11:58 AM
Subject: Re: About PID...???!!!
Quoted 6 lines
Quoted 2 lines
Quoted 1 line · John T. Williams
They are assigned linearly, however once a pid is used, it is never
reused
Quoted 3 lines
Quoted 1 line
until the machine reboots.
This is not quite correct. The pid assignment process wraps, I *think*
at
Quoted 10 lines
Quoted 4 lines
32767 (or maybe 65535). Next time around, the kernel skips over any pids that are still in use from the last round of assignment.
Quoted 1 line
A pid of 413 means that when that process was fork()'ed there had been
412
Quoted 1 line
Quoted 1 line
other processes already created. But remember every time you type ls,
you've
Quoted 3 lines
Quoted 3 lines
run a process.
413 isn't a large pid at all. My linux box which I very rarely reboot
is
Quoted 4 lines
at
Quoted 3 lines
Quoted 3 lines
PIDs that start at 20000
I'm surprised that any program you start after the boot process is as
low
Quoted 6 lines
as
Quoted 3 lines
Quoted 1 line
412.
Whether that is surprising or not depends on what he uses the host for
and,
Quoted 1 line
naturally, on how recently it was rebooted. While my workstation is way
up
Quoted 5 lines
Quoted 5 lines
there (30180), my Linux-based router, which does not start new processes very much, is only at pid 828.
And, of course, there are persistent processes on any Linux host that go back to the boot/init process ... starting with init itself (always pid
1)
Quoted 2 lines
Quoted 2 lines
and including long-lived daemons such as syslogd, klogd, and portmap; pseudo processes that are actually run in the kernel (mostly [k*]
process
Quoted 6 lines
Quoted 6 lines
names); and getty proceses listening on VTs that never get logins.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie"
in
Quoted 9 lines
Quoted 3 lines
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
should not have used
----- Original Message -----
From: "John T. Williams" <[email protected]>
To: "John T. Williams" <[email protected]>; <[email protected]>
Sent: Wednesday, September 10, 2003 3:15 PM
Subject: Re: About PID...???!!!
Quoted 1 line
Alright Alright, I concede it does loop, I should have used the word
never.
Quoted 25 lines
I'll change it to rarely and be done with it, in any case I think Silambu got his answer which briefly is:
No PID = 412 doesn't mean there are 412 process currently running on your machine.
Read the man page for ps to learn how to identify processes that are currently running.----- Original Message -----
From: "John T. Williams" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 10, 2003 2:04 PM
Subject: Re: About PID...???!!!Quoted 10 lines
definitely higher then 2^16, I've got a process with the PID of 69917 I would guess
MAX_INTwhich is 2^32 -1 = 4294967295----- Original Message -----
From: "Ray Olszewski" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 10, 2003 11:58 AM
Subject: Re: About PID...???!!!
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Quoted 1 line · John T. Williams
They are assigned linearly, however once a pid is used, it is never
reused
Quoted 3 lines
Quoted 1 line
until the machine reboots.
This is not quite correct. The pid assignment process wraps, I *think*
at
Quoted 1 line
Quoted 1 line
32767 (or maybe 65535). Next time around, the kernel skips over any
pids
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
that are still in use from the last round of assignment.
Quoted 1 line
A pid of 413 means that when that process was fork()'ed there had
been
Quoted 5 lines
Quoted 5 lines
412
Quoted 1 line
Quoted 1 line
other processes already created. But remember every time you type ls,
you've
Quoted 2 lines
Quoted 2 lines
run a process.
Quoted 13 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
413 isn't a large pid at all. My linux box which I very rarely reboot
is
Quoted 4 lines
at
Quoted 3 lines
Quoted 3 lines
PIDs that start at 20000
I'm surprised that any program you start after the boot process is as
low
Quoted 6 lines
as
Quoted 3 lines
Quoted 1 line
412.
Whether that is surprising or not depends on what he uses the host for
and,
Quoted 1 line
naturally, on how recently it was rebooted. While my workstation is
way
Quoted 2 lines
up
Quoted 1 line
Quoted 1 line
there (30180), my Linux-based router, which does not start new
processes
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
very much, is only at pid 828.
And, of course, there are persistent processes on any Linux host that
go
Quoted 1 line
Quoted 1 line
Quoted 1 line
back to the boot/init process ... starting with init itself (always
pid
Quoted 10 lines
1)
Quoted 2 lines
Quoted 2 lines
and including long-lived daemons such as syslogd, klogd, and portmap; pseudo processes that are actually run in the kernel (mostly [k*]
process
Quoted 6 lines
Quoted 6 lines
names); and getty proceses listening on VTs that never get logins.
-
To unsubscribe from this list: send the line "unsubscribe
linux-newbie"
Quoted 7 lines
in
Quoted 6 lines
Quoted 3 lines
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs-
To unsubscribe from this list: send the line "unsubscribe linux-newbie"
in
Quoted 9 lines
Quoted 3 lines
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs