mfd: Add S5M series configuration

This patch add Samsung S5M series configuration.

---
 drivers/mfd/Kconfig  |   12 ++++++++++++
 drivers/mfd/Makefile |    1 +
 2 files changed, 13 insertions(+), 0 deletions(-)

index 21574bd..e280d2a 100644
@@ -386,6 +386,18 @@ config MFD_MAX8998
 	  additional drivers must be enabled in order to use the

functionality
of the device.

+config MFD_S5M_CORE
+ bool "SAMSUNG S5M Series Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help

+	  Say yes here to support for SAMSUNG S5M series.
+	  This is a Power Management IC.
+	  This driver provies common support for accessing the device,
+	  additional drivers must be enabled in order to use the

functionality
+ of the device
+
config MFD_WM8400
tristate "Support Wolfson Microelectronics WM8400" select MFD_CORE

index c580203..dfd05a2 100644
@@ -102,3 +102,4 @@ obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o
 obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
+obj-$(CONFIG_MFD_S5M_CORE)	+= s5m-core.o s5m-irq.o

1.7.1