Multiipath routing - can't ping links from LAN after default routes
I have a Linux with 3 LAN interfaces doing multipath NAT to two internet links via ADSL. The question I have is after I added the default route on each of the routing table, I can't ping the external interfaces of the Linux from the LAN ( pinging from the Linux itself is OK ). But pinging beyond the two external interfaces ( eg the default route ) is OK.
I use symbolic names here :-
#
ip route add ${INSIDE_NETWORK} dev ${INSIDE_DEV} table
first
ip route add ${OUTSIDE_NETWORK} dev ${OUTSIDE_DEVICE} table first
ip route add ${OUTSIDE_NETWORK2} dev ${OUTSIDE_DEVICE2} table first
ip route add 127.0.0.0/8 dev lo table first
#
ip route add ${INSIDE_NETWORK} dev ${INSIDE_DEV} table
second
ip route add ${OUTSIDE_NETWORK} dev ${OUTSIDE_DEVICE} table second ip route add ${OUTSIDE_NETWORK2} dev ${OUTSIDE_DEVICE2} table second
ip route add 127.0.0.0/8 dev lo table second
#
ip route add ${OUTSIDE_NETWORK} dev ${OUTSIDE_DEVICE} src
${OUTSIDE_IP}
ip route add ${OUTSIDE_NETWORK2} dev ${OUTSIDE_DEVICE2} src
${OUTSIDE_IP2}
#
ip rule add from ${OUTSIDE_IP} table first
ip rule add from ${OUTSIDE_IP2} table second
#
# weighted multipath routing
#
ip route add default scope global nexthop via \${OUTSIDE_GATEWAY} \
${OUTSIDE_DEVICE} weight ${OUTSIDE_DEV_WEIGHT} \ nexthop
${OUTSIDE_GATEWAY2} dev ${OUTSIDE_DEVICE2} \
weight ${OUTSIDE_DEV2_WEIGHT}Everything is working if I just do as above, I can ping OUTSIDE_GATEWAY and OUTSIDE_GATEWAY2 AND OUTSIDE_IP and OUTSIDE_IP2. But
If I added the two lines below :-
ip route add default via ${OUTSIDE_GATEWAY} table first
ip route add default via ${OUTSIDE_GATEWAY2} table secondThen I can't ping from my INSIDE_NETWORK to both the OUTSIDE_IP and OUTSIDE_IP2 but still able to ping OUTSIDE_GATEWAY and OUTSIDE_GATEWAY2.
Why ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/