Problems with DSP gateway
Hi,
I have just built 2.6.15 kernel with 2.6.15-omap1 patch. I included the DSP gateway support in my "make xconfig" stage. I downloaded the utils and apps from sourceforge for dspgateway 3.3 and built those successfully. I am using Uboot 1.1.1 to setup my 5912 OSK board and then downloading the kernel and a ramdisk via JTAG to target memory. Console is via serial port and minicom to my host PC. My ramdisk is created with:
set -x
SIZE=8192
DEV=/dev/ram
ROOTFS=/usr/src/5912/rootfs2.6
/sbin/mkfs.ext2 $DEV $SIZE
mount -t ext2 $DEV /mnt/ram
cd $ROOTFS
cp -av . /mnt/ram
df /dev/ram
umount /mnt/ram
dd if=$DEV bs=1k count=$SIZE | gzip -9 > ramdisk.image.gz
chmod 666 ramdisk.image.gz
I try to do: dspctl load ex_task.out but it tells me that:
Warning: none of /sys/devicesplatform/dsp.0/ifver, /sys/devices/platform/dsp0..
(DSP Gateway driver is too old or not loaded)
open control device: No such file or directory.
In /sys/devices/platform I have: i2c_omap.1, omap_mcbsp.1, omapflash.0, serial8250.0, omap-keyboard, omap_t2, power, smc91x, omap_cf, omapfb, serial8250 and uevent.
In /dev I have: console, tty, tty0 and ttyS0
lsmod shows no modules loaded.
I'm sure I have missed a step along the way here but I can't find it. Can someone point me in the right direction please?
Thanks,
Richard.