VIA KT133 data corruption update
After several months of begrudgingly putting up with my ASUS A7V motherboard corrupting roughly 1 byte per 100 million read during moderate to heavy PCI bus activity, I flashed VIA's 1009 BIOS this evening.
I have not been able to reproduce any corruption since then (it was ridiculously easy before the new BIOS), and my machine seems otherwise as stable as I would hope. This marks the first time since 2.4.6 that I've been able to run a Linus kernel without cowering.
I also discovered, of necessity, a halfway manageable process for creating a DOS boot floppy using Windows ME, which Microsoft would apparently prefer was not possible. I'll reproduce the steps here, since otherwise flashing a new BIOS is likely to be nightmarish for people stuck dual booting into WinME.
Most of these steps occur under Linux, and I'll assume that your Windows Me "C:" drive is mounted as /dos/c.
- Format a floppy:
fdformat /dev/fd0H1440
- Create a FAT filesystem:
mkdosfs /dev/fd0
- Mount the floppy:
mount /dev/fd0 /mnt
- Copy across a few files:
cp /dos/c/command.com /mnt
cp /dos/c/io.sys /mnt
cp /dos/c/msdos.sys /mnt
- Edit /mnt/msdos.sys, and change values as follows:
[Paths]
WinDir=a:\
WinBootDir=a:\
HostWinBootDrv=a
[Options]
BootMulti=0
BootGUI=0
AutoScan=0
- Copy across your BIOS flash utility (probably aflash.exe) and BIOS image. Unmount the floppy (important; don't just reboot):
umount /mnt/floppy
- When you reboot to the floppy, it will desperately try to boot into Windows. When it prompts you for the path to some Windows VXD, just type "a:\command.com", and lo, you've got a DOS prompt.
Cheers,
<b
Quoted 9 lines · Bryan O'Sullivan
After several months of begrudgingly putting up with my ASUS A7V motherboard corrupting roughly 1 byte per 100 million read during moderate to heavy PCI bus activity, I flashed VIA's 1009 BIOS this evening.
I have not been able to reproduce any corruption since then (it was ridiculously easy before the new BIOS), and my machine seems otherwise as stable as I would hope. This marks the first time since 2.4.6 that I've been able to run a Linus kernel without cowering.
Good news. Congrats.
Quoted 34 lines
I also discovered, of necessity, a halfway manageable process for creating a DOS boot floppy using Windows ME, which Microsoft would apparently prefer was not possible. I'll reproduce the steps here, since otherwise flashing a new BIOS is likely to be nightmarish for people stuck dual booting into WinME.
Most of these steps occur under Linux, and I'll assume that your Windows Me "C:" drive is mounted as /dos/c.
- Format a floppy:
fdformat/dev/fd0H1440- Create a FAT filesystem:
mkdosfs/dev/fd0- Mount the floppy:
mount/dev/fd0/mnt- Copy across a few files:
cp /dos/c/command.com /mnt
cp /dos/c/io.sys /mnt
cp /dos/c/msdos.sys /mnt- Edit
/mnt/msdos.sys, and change values as follows:
[Paths]
WinDir=a:\
WinBootDir=a:\
HostWinBootDrv=a[Options]
BootMulti=0
BootGUI=0
AutoScan=0
Quoted 7 lines
- Copy across your BIOS flash utility (probably aflash.exe) and BIOS image. Unmount the floppy (important; don't just reboot):
umount/mnt/floppy- When you reboot to the floppy, it will desperately try to boot into Windows. When it prompts you for the path to some Windows VXD, just type "a:\command.com", and lo, you've got a DOS prompt.
Since your floppy doesn't contain a valid bootsector, it won't start from floppy here. At least my mkdosfs created boot sector says:
This is not a bootable disk. Please insert a bootable floppy and press any key to try again ...
The simplest solution is choosing win(9*|me) from boot manager then, press F8 immediately, select boot to command prompt. (Hope this works in me, too) Issue
c:\> sys a:
and
c:\> edit msdos.sys
then, as above. If booting from floppy still fails, check BIOS boot order.
Note: if you don't trust your winloose inst., check the created bootsector:
1) Label at offset 3 should read MSWIN4.1 or the like
2) some readable error messages at around 0x180
3) IO SYSMSDOS SYS at ~0x1d8
BTW[FAR OT]: Somebody remember IHC here?
Quoted 3 lines
Cheers,
<b
Have-a-nice-stay-where-ever-you-are-ly yours,
FrisPete
Quoted 4 lines · Bryan O'Sullivan
After several months of begrudgingly putting up with my ASUS A7V motherboard corrupting roughly 1 byte per 100 million read during moderate to heavy PCI bus activity, I flashed VIA's 1009 BIOS this evening.
Please note that there have been broken versions of the 1009 BIOS around. I know one person, and I read from serveral ones, who flashed 1009 to their A7V and were unable to start the computer afterwards. (Hangs before/during POST).
Apparently ASUS has replaced the broken version with a working one without updating the version number. But that's just a guess based on recent success stories about 1009.
Quoted 5 lines
I also discovered, of necessity, a halfway manageable process for creating a DOS boot floppy using Windows ME, which Microsoft would apparently prefer was not possible. I'll reproduce the steps here, since otherwise flashing a new BIOS is likely to be nightmarish for people stuck dual booting into WinME.
As I don't use Windows at all, FreeDOS has proven very useful for flashing the bios. (www.freedos.org)
But, of course, no guarantees.
Jan
Quoted 4 lines · Jan Niehusmann
Please note that there have been broken versions of the 1009 BIOS around. I know one person, and I read from serveral ones, who flashed 1009 to their A7V and were unable to start the computer afterwards. (Hangs before/during POST).
Ouch. As it happens, my system now beeps repeatedly on POST, but hitting the reset button convinces it to behave.
Quoted 2 lines
As I don't use Windows at all, FreeDOS has proven very useful for flashing the bios. (www.freedos.org)
I should have thought of that, had it not been 3am.
<b
Quoted 5 lines · Bryan O'Sullivan
I also discovered, of necessity, a halfway manageable process for creating a DOS boot floppy using Windows ME, which Microsoft would apparently prefer was not possible. I'll reproduce the steps here, since otherwise flashing a new BIOS is likely to be nightmarish for people stuck dual booting into WinME.
Slightly off topic, but you can also use the rescue disk (made using add/remove programs in the control panel) to get a DOS prompt, and use that to flash your new BIOS.
The Control or F8 trick to go to a DOS prompt does not work with ME.
Using FreeDOS is an even nicer approach, of course.
/Tobias
Quoted 5 lines · On 27 Oct 2001 03:48:56 -0700 "Bryan O'Sullivan" <[email protected]> wrote:
I also discovered, of necessity, a halfway manageable process for creating a DOS boot floppy using Windows ME, which Microsoft would apparently prefer was not possible. I'll reproduce the steps here, since otherwise flashing a new BIOS is likely to be nightmarish for people stuck dual booting into WinME.
I notice that Dell use FreeDOS on their utility disks that do this sort of thing. Dell++. Perhaps you might have more luck using that over WinBlowsME.
Sam.
----- Original Message -----
From: "Sam Vilain" <[email protected]>
To: "Bryan O'Sullivan" <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, October 30, 2001 2:26 PM
Subject: Re: VIA KT133 data corruption update
<snip>
Quoted 7 lines
I notice that Dell use FreeDOS on their utility disks that do this sort of thing. Dell++. Perhaps you might have more luck using that over WinBlowsME.
Even better: www.bootdisk.org
Quoted 5 lines · Martin Eriksson
Quoted 4 lines
I notice that Dell use FreeDOS on their utility disks that do this sort of thing. Dell++. Perhaps you might have more luck using that over WinBlowsME.
http://www.freedos.org/Even better: www.bootdisk.org
www.whydidntithinkofthat.com
Don't know about you, but I can't get to bootdisk.org's nameservers. The site isn't indexed by Google, either.
I tried bootdisk.com, but they have a distinctly w4r3z feel to them. That tends to turn me off. Strictly speaking, you're not supposed to distribute those images to people without a license...
Sam.