Skip to contentSkip to conversation

Traffic Shaping QoS and rate-limiting clients

LARTC Michael S. Kazmier 1 participant 1 message Jan 21, 2004

lore
Share & tools
lore
#0 lore raw

Hello all,

I am trying to figure out a way to traffic shape for QoS (ie, prioritize different types of traffic) for an entire network and ALSO rate limit / shape individual users on this network.

Now, I understand it all for rate control on users - what I can't figure out is how we can shape / prioritize by protocol (ie, treat ssh / telnet higher than www which is higher than ftp, etc). I suppose we could use the "split" command (9.5.4.5. Other CBQ parameters: split & defmap) but we would still require a separate rule for each user.

What does that mean -> well, we have one rule for each interface (minimum 2)
- one rule for each customer for each interface - AND one rule for each traffic filter for each customer for each interface!!! Obviously with several hundred users and 4 or 5 or 10 or 20 traffic prioritizations, we are looking at an unmanageable situation.

For those that are graphically inclined, here is what I am wanting to do utilizing CBQ:

             ROOT 1:
             /   \
Business(1:1)     Residential(1:2)    <-- Each PRIO Business 3, Residential
4, possible rate limit
        /              \
(Traffic Flow)      (Traffic Flow)    <-- PRIO and rate limit web, ftp, ssh,
etc.
      /                  \

(Individual Cust) (Individual Cust) <-- Individual rate limit per customer

Please - Any thoughts on achieving the above would be greatly appreciated!

Thanks in advance!

--Mike

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/