Skip to contentSkip to conversation

PATCH: Support tera byte disk

PATCH H. J. Lu 4 participants 5 messages Sep 18, 2002 – Sep 19, 2002 SCSI

lore
Share & tools
lore

H. J. Lu

author
#0 lore raw

For a 1.8TB SCSI HD, kernel reports:

SCSI device sda: -773086208 512-byte hdwr sectors (-395819 MB)

Here is a patch to fix it. BTW, I don't think it will work with > 2TB, which requires bigger changes.

H.J.

drivers/scsi/sd.c renamed from drivers/scsi/sd.c.tera +12 -4
@@ -1018,8 +1018,16 @@ static int sd_init_onedisk(int i)
 			 * Jacques Gelinas ([email protected])
 			 */
 			int m;
-			int hard_sector = sector_size;
-			int sz = rscsi_disks[i].capacity * (hard_sector/256);
+			unsigned hard_sector = sector_size;
+			unsigned sz = rscsi_disks[i].capacity * (hard_sector/256);
+
+			/* Check for overflow.  */
+			if (sz < rscsi_disks[i].capacity) {
+				sz = (rscsi_disks[i].capacity/1950) * (hard_sector/256);
+				sz = sz/2 - sz/1250 + 974;
+			}
+			else
+				sz = (sz/2 - sz/1250 + 974)/1950;
 
 			/* There are 16 minors allocated for each major device */
 			for (m = i << 4; m < ((i + 1) << 4); m++) {
@@ -1027,9 +1035,9 @@ static int sd_init_onedisk(int i)
 			}
 
 			printk("SCSI device %s: "
-			       "%d %d-byte hdwr sectors (%d MB)\n",
+			       "%u %u-byte hdwr sectors (%u MB)\n",
 			       nbuff, rscsi_disks[i].capacity,
-			       hard_sector, (sz/2 - sz/1250 + 974)/1950);
+			       hard_sector, sz);
 		}
 
 		/* Rescale capacity to 512-byte units */
#1 lore raw
Quoted 6 lines · H. J. Lu

For a 1.8TB SCSI HD, kernel reports:

SCSI device sda: -773086208 512-byte hdwr sectors (-395819 MB)

Here is a patch to fix it. BTW, I don't think it will work with > 2TB, which requires bigger changes.

There's also a limit where statfs() overflows at 16TB for 4kB block filesystems... Ask me how I noticed this ;-)

Luckily, it is easy to upshift f_blksz and downshift f_blocks, f_bfree, and f_bavail to get the data through the statfs interface, and df does the reverse on the other side. It makes sense to show a larger block size anyways, so apps potentially do larger I/O requests.

Cheers, Andreas
--
Andreas Dilger
http://www-mddsp.enel.ucalgary.ca/People/adilger/
http://sourceforge.net/projects/ext2resize/

#2 lore raw
Quoted 2 lines · Andreas Dilger

There's also a limit where statfs() overflows at 16TB for 4kB block filesystems... Ask me how I noticed this ;-)

Well, the whole world goes pear-shaped on ia32 with >16TB filesystems, so statfs is the least of your worries in that case :-(

	<b
#3 lore raw
Quoted 7 lines · Bryan O'Sullivan
Quoted 2 lines · Andreas Dilger

There's also a limit where statfs() overflows at 16TB for 4kB block filesystems... Ask me how I noticed this ;-)

Well, the whole world goes pear-shaped on ia32 with >16TB filesystems, so statfs is the least of your worries in that case :-(

Why do you say that? I've been testing with 60TB or larger filesystems all week ;-). Note that we can use more than a single block device and/or remote storage target to store data, so block device limits are not applicable to us, although 16TB files are a limit we will hit soon.

Cheers, Andreas
--
Andreas Dilger
http://www-mddsp.enel.ucalgary.ca/People/adilger/
http://sourceforge.net/projects/ext2resize/

#4 lore raw

Ummm...could you edumacate us on how one constructs a 60TB file system on IA32??? I thought 2TB was the limit.
I'm particularly interested if this is RAID too (I'm a RAID5 fan). I'm trying to avoid NAS for my next file system upgrade.

----- Original Message -----
From: "Andreas Dilger" <[email protected]>
To: "Bryan O'Sullivan" <[email protected]>
Cc: "H. J. Lu" <[email protected]>; "linux kernel" <[email protected]>
Sent: Wednesday, September 18, 2002 6:41 PM
Subject: Re: PATCH: Support tera byte disk

Quoted 25 lines · Bryan O'Sullivan
Quoted 7 lines · Andreas Dilger
Quoted 3 lines

There's also a limit where statfs() overflows at 16TB for 4kB block filesystems... Ask me how I noticed this ;-)

Well, the whole world goes pear-shaped on ia32 with >16TB filesystems, so statfs is the least of your worries in that case :-(

Why do you say that? I've been testing with 60TB or larger filesystems all week ;-). Note that we can use more than a single block device and/or remote storage target to store data, so block device limits are not applicable to us, although 16TB files are a limit we will hit soon.

Cheers, Andreas
--
Andreas Dilger
http://www-mddsp.enel.ucalgary.ca/People/adilger/
http://sourceforge.net/projects/ext2resize/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/