Skip to contentSkip to conversation

Lost all logical volumes in two volume groups?

linux-lvm Jimisola Laursen 2 participants 3 messages Dec 22, 2005 – Jan 18, 2006

lore
Share & tools
lore
#0 lore raw

Hi!

After a failed Mandriva upgrade I can no longer use my two LVM (vg01 and vg02).
When the upgrade failed I unplugged my disks after two-three boots where ReiserFS found errors until I had reinstalled my system (with OpenSuse).

I just plugged in my disks again and the LVM partitions are recognized, but there are no LVs! Is there anyway for me to fix this?

I have an old copy of /etc/lvm with archive and backup directories including vg01_00000.vg and vg01_00001.vg. No .vg files for vg02 though, but that VG is less important than the vg01 one.

VG system: current OpenSuse system
VG vg01: shows no LV (have .vg files)
VG vg02: shows no LV (have no .vg files)

All partitions are ReiserFS.

Regards,
Jimisola

fermat:/scratch # vgchange -ay
0 logical volume(s) in volume group "vg02" now active 5 logical volume(s) in volume group "system" now active 0 logical volume(s) in volume group "vg01" now active
fermat:/scratch # vgdisplay
--- Volume group ---
VG Name vg02
System ID

 Format                lvm2
 Metadata Areas        1
 Metadata Sequence No  3
 VG Access             read/write
 VG Status             resizable
 MAX LV                255
 Cur LV                0
 Open LV               0
 Max PV                255
 Cur PV                1
 Act PV                1
 VG Size               45.90 GB
 PE Size               4.00 MB
 Total PE              11750
 Alloc PE / Size       0 / 0
 Free  PE / Size       11750 / 45.90 GB
 VG UUID               crHchE-236z-G24u-AGhW-MgDd-nTxD-1MnxHn

--- Volume group ---
VG Name system
System ID

 Format                lvm2
 Metadata Areas        1
 Metadata Sequence No  7
 VG Access             read/write
 VG Status             resizable
 MAX LV                0
 Cur LV                5
 Open LV               5
 Max PV                0
 Cur PV                1
 Act PV                1
 VG Size               97.66 GB
 PE Size               4.00 MB
 Total PE              25001
 Alloc PE / Size       11506 / 44.95 GB
 Free  PE / Size       13495 / 52.71 GB
 VG UUID               qMe8jO-4Qyl-Weno-k09t-n2Pd-Jo5G-Co7kpn

--- Volume group ---
VG Name vg01
System ID

 Format                lvm2
 Metadata Areas        1
 Metadata Sequence No  12
 VG Access             read/write
 VG Status             resizable
 MAX LV                255
 Cur LV                0
 Open LV               0
 Max PV                255
 Cur PV                1
 Act PV                1
 VG Size               232.88 GB
 PE Size               4.00 MB
 Total PE              59618
 Alloc PE / Size       0 / 0
 Free  PE / Size       59618 / 232.88 GB
 VG UUID               YowUTE-awQj-OyKP-0UGH-nwkD-MZzt-e8P0kK 
#1 lore raw

Hi!

I made the post below a almost a month ago, but I never received any replies.

I would really appreciate some help on this matter since I haven't been able to solve it.

Kindly,
Jimisola

----- Original Message ----- From: "Jimisola Laursen" <[email protected]>
To: <[email protected]>
Sent: Thursday, December 22, 2005 11:36 AM
Subject: [linux-lvm] Lost all logical volumes in two volume groups?

Quoted 94 lines

Hi!

After a failed Mandriva upgrade I can no longer use my two LVM (vg01 and vg02).
When the upgrade failed I unplugged my disks after two-three boots where ReiserFS found errors until I had reinstalled my system (with OpenSuse).

I just plugged in my disks again and the LVM partitions are recognized, but there are no LVs! Is there anyway for me to fix this?

I have an old copy of /etc/lvm with archive and backup directories including vg01_00000.vg and vg01_00001.vg. No .vg files for vg02 though, but that VG is less important than the vg01 one.

VG system: current OpenSuse system
VG vg01: shows no LV (have .vg files)
VG vg02: shows no LV (have no .vg files)

All partitions are ReiserFS.

Regards,
Jimisola

fermat:/scratch # vgchange -ay
0 logical volume(s) in volume group "vg02" now active 5 logical volume(s) in volume group "system" now active 0 logical volume(s) in volume group "vg01" now active
fermat:/scratch # vgdisplay
--- Volume group ---
VG Name vg02
System ID

 Format                lvm2
 Metadata Areas        1
 Metadata Sequence No  3
 VG Access             read/write
 VG Status             resizable
 MAX LV                255
 Cur LV                0
 Open LV               0
 Max PV                255
 Cur PV                1
 Act PV                1
 VG Size               45.90 GB
 PE Size               4.00 MB
 Total PE              11750
 Alloc PE / Size       0 / 0
 Free  PE / Size       11750 / 45.90 GB
 VG UUID               crHchE-236z-G24u-AGhW-MgDd-nTxD-1MnxHn

--- Volume group ---
VG Name system
System ID

 Format                lvm2
 Metadata Areas        1
 Metadata Sequence No  7
 VG Access             read/write
 VG Status             resizable
 MAX LV                0
 Cur LV                5
 Open LV               5
 Max PV                0
 Cur PV                1
 Act PV                1
 VG Size               97.66 GB
 PE Size               4.00 MB
 Total PE              25001
 Alloc PE / Size       11506 / 44.95 GB
 Free  PE / Size       13495 / 52.71 GB
 VG UUID               qMe8jO-4Qyl-Weno-k09t-n2Pd-Jo5G-Co7kpn

--- Volume group ---
VG Name vg01
System ID

 Format                lvm2
 Metadata Areas        1
 Metadata Sequence No  12
 VG Access             read/write
 VG Status             resizable
 MAX LV                255
 Cur LV                0
 Open LV               0
 Max PV                255
 Cur PV                1
 Act PV                1
 VG Size               232.88 GB
 PE Size               4.00 MB
 Total PE              59618
 Alloc PE / Size       0 / 0
 Free  PE / Size       59618 / 232.88 GB
 VG UUID               YowUTE-awQj-OyKP-0UGH-nwkD-MZzt-e8P0kK

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

#2 lore raw

I received this info when I posted a similar question, perhaps this will be useful.
----------------------

hi, i found your message in the redhat lvm-mailinglist doing a google resarch about exactly that same problem.

because i'm not member of the mailing list i prefer to write directly to tell you what i found after days of resarch and as my last resort facing the fact to lose everything on a single 750gb array ;)

preface: i had only one(!) lv spanning the whole 750gb vg. i think this is pretty important for the following procedure - especially if the exact parameters are not known (in my case because the whole system was set up trough a 3rd party linux-based NAS)

1) i simply recreated that one lv with lvcreate (my luck it was initially set up using all standards and max. possible size)

2) now there was no filsystem (as i supposed). but a filesystemrepair (xfs_repair in my case) did the magic. it found the 2nd superblock intact and after a short while everything was in place again.

3) feels like winning the lottery.

4) i'm a true linux-novice and to me that procedure felt extreme risky, but i found nothing, absolutely nothing else that comes any near just a little help in such a case; no tools, no how-tos, nothing. so i tried it, at last considering this isn't totally out of logic.

bye & greetings from vienna,
gerald gstaltner

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Jimisola Laursen
Sent: Tuesday, January 17, 2006 4:12 PM
To: [email protected]
Subject: Re: [linux-lvm] Lost all logical volumes in two volume groups?

Hi!

I made the post below a almost a month ago, but I never received any replies.

I would really appreciate some help on this matter since I haven't been able to
solve it.

Kindly,
Jimisola

----- Original Message -----
From: "Jimisola Laursen" <[email protected]>
To: <[email protected]>
Sent: Thursday, December 22, 2005 11:36 AM
Subject: [linux-lvm] Lost all logical volumes in two volume groups?

Quoted 8 lines

Hi!

After a failed Mandriva upgrade I can no longer use my two LVM (vg01 and vg02).
When the upgrade failed I unplugged my disks after two-three boots where ReiserFS found errors until I had reinstalled my system (with OpenSuse).

I just plugged in my disks again and the LVM partitions are recognized,

but

Quoted 4 lines

there are no LVs!
Is there anyway for me to fix this?

I have an old copy of /etc/lvm with archive and backup directories

including

Quoted 2 lines

vg01_00000.vg and vg01_00001.vg.
No .vg files for vg02 though, but that VG is less important than the vg01

one.

Quoted 78 lines

VG system: current OpenSuse system
VG vg01: shows no LV (have .vg files)
VG vg02: shows no LV (have no .vg files)

All partitions are ReiserFS.

Regards,
Jimisola

fermat:/scratch # vgchange -ay
0 logical volume(s) in volume group "vg02" now active 5 logical volume(s) in volume group "system" now active 0 logical volume(s) in volume group "vg01" now active
fermat:/scratch # vgdisplay
--- Volume group ---
VG Name vg02
System ID

 Format                lvm2
 Metadata Areas        1
 Metadata Sequence No  3
 VG Access             read/write
 VG Status             resizable
 MAX LV                255
 Cur LV                0
 Open LV               0
 Max PV                255
 Cur PV                1
 Act PV                1
 VG Size               45.90 GB
 PE Size               4.00 MB
 Total PE              11750
 Alloc PE / Size       0 / 0
 Free  PE / Size       11750 / 45.90 GB
 VG UUID               crHchE-236z-G24u-AGhW-MgDd-nTxD-1MnxHn

--- Volume group ---
VG Name system
System ID

 Format                lvm2
 Metadata Areas        1
 Metadata Sequence No  7
 VG Access             read/write
 VG Status             resizable
 MAX LV                0
 Cur LV                5
 Open LV               5
 Max PV                0
 Cur PV                1
 Act PV                1
 VG Size               97.66 GB
 PE Size               4.00 MB
 Total PE              25001
 Alloc PE / Size       11506 / 44.95 GB
 Free  PE / Size       13495 / 52.71 GB
 VG UUID               qMe8jO-4Qyl-Weno-k09t-n2Pd-Jo5G-Co7kpn

--- Volume group ---
VG Name vg01
System ID

 Format                lvm2
 Metadata Areas        1
 Metadata Sequence No  12
 VG Access             read/write
 VG Status             resizable
 MAX LV                255
 Cur LV                0
 Open LV               0
 Max PV                255
 Cur PV                1
 Act PV                1
 VG Size               232.88 GB
 PE Size               4.00 MB
 Total PE              59618
 Alloc PE / Size       0 / 0
 Free  PE / Size       59618 / 232.88 GB
 VG UUID               YowUTE-awQj-OyKP-0UGH-nwkD-MZzt-e8P0kK
Quoted 6 lines

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/