Skip to contentSkip to conversation

python gitignore and line length

PATCH In review Juraj Linkeš 6 participants 36 messages Nov 3, 2022 – Nov 21, 2023 Arm/Amlogic Meson SoC support

lore
Share & tools
lore
#0 lore raw

cover python gitignore and line length

These two config options/preferences are relevant to DTS, but not only to DTS and need to be discussed separately, as they affect all Python code in DPDK.

Juraj Linkeš (2):
git: ignore standard python files
doc: increase python max line to 88

 .editorconfig                            | 2 +-
 .gitignore                               | 6 ++++--
 doc/doc_build/meson-private/meson.lock   | 0
 doc/guides/contributing/coding_style.rst | 8 +++++++-
 4 files changed, 12 insertions(+), 4 deletions(-)
 create mode 100644 doc/doc_build/meson-private/meson.lock
Signature · 1 line
2.30.2
#1 lore raw

PATCH 1/2 git: ignore standard python files

These are python byte-compiled/optimized/dll files and IDE files.

---
 .gitignore | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
.gitignore +4 -2
index 212c7aa28e..fbec0ce441 100644
@@ -33,8 +33,10 @@ GRTAGS
 tags
 TAGS
 
-# ignore python bytecode files
-*.pyc
+# python byte-compiled/optimized/dll files
+__pycache__/
+*.py[cod]
+*$py.class
 
 # ignore default build directory, and directories from test-meson-builds.sh
 build
Signature · 1 line
2.30.2
#2 lore raw

RE: [PATCH v1 1/2] git: ignore standard python files

Adding folks I forgot to add

Quoted 30 lines

-----Original Message-----
From: Juraj Linkeš <[email protected]>
Sent: Thursday, November 3, 2022 2:29 PM
Cc: [email protected]; Juraj Linkeš <[email protected]>
Subject: [PATCH v1 1/2] git: ignore standard python files

These are python byte-compiled/optimized/dll files and IDE files.

---
 .gitignore | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
.gitignore +2 -2
index 212c7aa28e..fbec0ce441 100644
@@ -33,8 +33,10 @@ GRTAGS
 tags
 TAGS
 
-# ignore python bytecode files
-*.pyc
+# python byte-compiled/optimized/dll files __pycache__/ *.py[cod]
+*$py.class
 
 # ignore default build directory, and directories from test-meson-builds.sh

build
--
2.30.2

Acked-by on v1 1/2
#3 lore raw

Re: [PATCH v1 1/2] git: ignore standard python files

In reply to Juraj Linkeš
Quoted 12 lines · Juraj Linkeš

These are python byte-compiled/optimized/dll files and IDE files.

---
 .gitignore | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
.gitignore +0 -0
index 212c7aa28e..fbec0ce441 100644

.gitignore GRTAGS · line 40

Quoted 10 lines
.gitignore +4 -2
@@ -33,8 +33,10 @@ GRTAGS
 tags
 TAGS
 
-# ignore python bytecode files
-*.pyc
+# python byte-compiled/optimized/dll files
+__pycache__/
+*.py[cod]
+*$py.class
 

Looks harmless :-)

#4 lore raw

PATCH 1/1 doc: fix description of runtime directories

In reply to Juraj Linkeš

The documentation was never updated when the DPDK EAL was modified to follow standard runtime conventions.

Fixes 1835a22f342f ("support systemd service convention for runtime directory")
---
 doc/guides/prog_guide/multi_proc_support.rst | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
doc/guides/prog_guide/multi_proc_support.rst +8 -5
index 815e8bdc4332..cdebfa8d05bb 100644
@@ -107,15 +107,18 @@ Running Multiple Independent DPDK Applications
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 In addition to the above scenarios involving multiple DPDK processes working together,
-it is possible to run multiple DPDK processes side-by-side,
+it is possible to run multiple DPDK processes concurrently,
 where those processes are all working independently.
 Support for this usage scenario is provided using the ``--file-prefix`` parameter to the EAL.
 
-By default, the EAL creates hugepage files on each hugetlbfs filesystem using the rtemap_X filename,
+The EAL puts shared runtime files in a directory based on standard conventions.
+If ``$RUNTIME_DIRECTORY'' is defined in the environment it is used (as ``$RUNTIME_DIRECTORY/dpdk'').
+Otherwise, if DPDK is run as root user, it uses /var/run/dpdk
+or if run as non-root user then the /tmp/dpdk (or $XDG_RUNTIME_DIRECTORY/dpdk) is used.
+Hugepage files on each hugetlbfs filesystem using the rtemap_X filename,
 where X is in the range 0 to the maximum number of hugepages -1.
-Similarly, it creates shared configuration files, memory mapped in each process, using the /var/run/.rte_config filename,
-when run as root (or $HOME/.rte_config when run as a non-root user;
-if filesystem and device permissions are set up to allow this).
+Similarly, it creates shared configuration files, memory mapped in each process,
+using the .rte_config filename.
 The rte part of the filenames of each of the above is configurable using the file-prefix parameter.
 
 In addition to specifying the file-prefix parameter,
Signature · 1 line
2.39.2
#5 lore raw

Re: [PATCH] doc: fix description of runtime directories

16/07/2023 20:11, Stephen Hemminger:

Quoted 6 lines

The documentation was never updated when the DPDK EAL was modified to follow standard runtime conventions.

Fixes 1835a22f342f ("support systemd service convention for runtime directory")

Applied, thanks.

#6 lore raw

PATCH 2/2 doc: increase python max line to 88

In reply to Juraj Linkeš

88 is a good compromise between shorter files, readability and other considerations. More in [0].

[0] https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length

---
 .editorconfig                            | 2 +-
 doc/doc_build/meson-private/meson.lock   | 0
 doc/guides/contributing/coding_style.rst | 8 +++++++-
 3 files changed, 8 insertions(+), 2 deletions(-)
 create mode 100644 doc/doc_build/meson-private/meson.lock
.editorconfig +1 -1
index ab41c95085..f20996f329 100644
@@ -16,7 +16,7 @@ max_line_length = 100
 [*.py]
 indent_style = space
 indent_size = 4
-max_line_length = 79
+max_line_length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
 
 [meson.build]
 indent_style = space
doc/doc_build/meson-private/meson.lock new file +0 -0
new file mode 100644
index 0000000000..e69de29bb2
doc/guides/contributing/coding_style.rst +7 -1
index 89db6260cf..7620268dc7 100644
@@ -851,7 +851,13 @@ Python Code
 All Python code should be compliant with
 `PEP8 (Style Guide for Python Code) <https://www.python.org/dev/peps/pep-0008/>`_.
 
-The ``pep8`` tool can be used for testing compliance with the guidelines.
+The ``pep8`` tool can be used for testing compliance with the guidelines. Note that the
+maximum line length is 88, as that is a good compromise between shorter files, usability
+with other tools (side-by-side diffs, docs, presentations) and disability accommodation.
+More in `Black's documentation
+<https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length>`_.
+
+..
 
 Integrating with the Build System
 ---------------------------------
Signature · 1 line
2.30.2
#7 lore raw

RE: [PATCH v1 2/2] doc: increase python max line to 88

Adding folks I forgot to add.

Quoted 65 lines

-----Original Message-----
From: Juraj Linkeš <[email protected]>
Sent: Thursday, November 3, 2022 2:29 PM
Cc: [email protected]; Juraj Linkeš <[email protected]>
Subject: [PATCH v1 2/2] doc: increase python max line to 88

88 is a good compromise between shorter files, readability and other considerations. More in [0].

[0]
https://black.readthedocs.io/en/stable/the_black_code_style/current_style
.html#line-length

---
 .editorconfig                            | 2 +-
 doc/doc_build/meson-private/meson.lock   | 0
 doc/guides/contributing/coding_style.rst | 8 +++++++-
 3 files changed, 8 insertions(+), 2 deletions(-)  create mode 100644

doc/doc_build/meson-private/meson.lock

.editorconfig +3 -1
@@ -16,7 +16,7 @@ max_line_length = 100
 [*.py]
 indent_style = space
 indent_size = 4
-max_line_length = 79
+max_line_length = 88 #
+https://black.readthedocs.io/en/stable/the_black_code_style/current_sty
+le.html#line-length
 
 [meson.build]
 indent_style = space
doc/doc_build/meson-private/meson.lock new file +0 -0
new file mode 100644
index 0000000000..e69de29bb2
doc/guides/contributing/coding_style.rst +0 -0
index 89db6260cf..7620268dc7 100644
@@ -851,7 +851,13 @@ Python Code
 All Python code should be compliant with
 `PEP8 (Style Guide for Python Code)

<https://www.python.org/dev/peps/pep-0008/>`_.

doc/guides/contributing/coding_style.rst +3 -1
-The ``pep8`` tool can be used for testing compliance with the guidelines.
+The ``pep8`` tool can be used for testing compliance with the
+guidelines. Note that the maximum line length is 88, as that is a good
+compromise between shorter files, usability with other tools (side-by-side

diffs, docs, presentations) and disability accommodation. +More in Black's documentation +<https://black.readthedocs.io/en/stable/the_black_code_style/current_st yle.html#line-length>_.
+
+..

Integrating with the Build System
---------------------------------
--
2.30.2

#8 lore raw

Re: [PATCH v1 2/2] doc: increase python max line to 88

Quoted 18 lines · Juraj Linkeš

Adding folks I forgot to add.

Quoted 16 lines

-----Original Message-----
From: Juraj Linkeš <[email protected]>
Sent: Thursday, November 3, 2022 2:29 PM
Cc: [email protected]; Juraj Linkeš <[email protected]>
Subject: [PATCH v1 2/2] doc: increase python max line to 88

88 is a good compromise between shorter files, readability and other considerations. More in [0].

[0]
https://black.readthedocs.io/en/stable/the_black_code_style/current_style
.html#line-length

---

Personally, if we move beyond 80 chars, I'd prefer to go all the way to 100, but I'm not going to argue about it. Happy enough to go with 88 for now.

#9 lore raw

Re: [PATCH v1 2/2] doc: increase python max line to 88

In reply to Juraj Linkeš
Quoted 3 lines · On Fri, 4 Nov 2022 09:16:13 +0000 Juraj Linkeš <[email protected]>…

Review

Quoted 3 lines
(quoted diff) +3 -0
+max_line_length = 88 #
+https://black.readthedocs.io/en/stable/the_black_code_style/current_sty
+le.html#li

Skip the comment, it caused your line break!

#10 lore raw

RE: [PATCH v1 2/2] doc: increase python max line to 88

Quoted 13 lines

-----Original Message-----
From: Stephen Hemminger <[email protected]>
Sent: Friday, November 4, 2022 5:58 PM
To: Juraj Linkeš <[email protected]>
Cc: Honnappa Nagarahalli <[email protected]>; Owen Hilyard <[email protected]>; [email protected]; Lijuan Tu <[email protected]>; Richardson, Bruce <[email protected]>; [email protected]
Subject: Re: [PATCH v1 2/2] doc: increase python max line to 88

On Fri, 4 Nov 2022 09:16:13 +0000
Juraj Linkeš <[email protected]> wrote:

Quoted 6 lines
Quoted 2 lines
Quoted 2 lines

+max_line_length = 88 #

+https://black.readthedocs.io/en/stable/the_black_code_style/current_sty

Quoted 1 line
Quoted 1 line

+le.html#li

Skip the comment, it caused your line break!

The fact that the line is a bit longer does not make the line less readable, as the link is there to be copy-pasted (and I don't think anyone reads the full hyperlinks - the knowledge of domain is enough). As such I think it's better to include the link as it serves as self-documentation (that we're deviating from the standard).

We could move the comment before or after the max_line_length option and that would result in lines below 100 characters (which is what .editorconfig prescribes). I used that in my one of my local versions, but it was less readable in my opinion. I'd rather break the rule and have it be more readable.

Of course, not having the comment is fine, since we document it in the coding style guide. I just think there's no (or very little) downside and some upside (more than downside) in adding the comment.

#11 lore raw

Re: [PATCH v1 2/2] doc: increase python max line to 88

Quoted 18 lines · On Thu, 10 Nov 2022 09:15:16 +0000 Juraj Linkeš <[email protected]>…
Quoted 18 lines

-----Original Message-----
From: Stephen Hemminger <[email protected]>
Sent: Friday, November 4, 2022 5:58 PM
To: Juraj Linkeš <[email protected]>
Cc: Honnappa Nagarahalli <[email protected]>; Owen Hilyard <[email protected]>; [email protected]; Lijuan Tu <[email protected]>; Richardson, Bruce <[email protected]>; [email protected]
Subject: Re: [PATCH v1 2/2] doc: increase python max line to 88

Quoted 2 lines · On Fri, 4 Nov 2022 09:16:13 +0000 Juraj Linkeš <[email protected]>…
Quoted 2 lines

+max_line_length = 88 #

+https://black.readthedocs.io/en/stable/the_black_code_style/current_sty

Quoted 1 line
Quoted 1 line

+le.html#li

Quoted 7 lines
Quoted 1 line

Skip the comment, it caused your line break!

The fact that the line is a bit longer does not make the line less readable, as the link is there to be copy-pasted (and I don't think anyone reads the full hyperlinks - the knowledge of domain is enough). As such I think it's better to include the link as it serves as self-documentation (that we're deviating from the standard).

We could move the comment before or after the max_line_length option and that would result in lines below 100 characters (which is what .editorconfig prescribes). I used that in my one of my local versions, but it was less readable in my opinion. I'd rather break the rule and have it be more readable.

Of course, not having the comment is fine, since we document it in the coding style guide. I just think there's no (or very little) downside and some upside (more than downside) in adding the comment.

The choice of max line length is project specific. Referencing some other style guide doesn't seem necessary. My choice would be to use 100 like the other C code.

#12 lore raw

PATCH v2 1/2 doc: increase python max line length to 100

In reply to Juraj Linkeš

Unify with C recommendations which allow line length of up to 100 characters.

---
 .editorconfig                            | 2 +-
 doc/doc_build/meson-private/meson.lock   | 0
 doc/guides/contributing/coding_style.rst | 3 +++
 3 files changed, 4 insertions(+), 1 deletion(-)
 create mode 100644 doc/doc_build/meson-private/meson.lock
.editorconfig +1 -1
index ab41c95085..1e7d74213f 100644
@@ -16,7 +16,7 @@ max_line_length = 100
 [*.py]
 indent_style = space
 indent_size = 4
-max_line_length = 79
+max_line_length = 100
 
 [meson.build]
 indent_style = space
doc/doc_build/meson-private/meson.lock new file +0 -0
new file mode 100644
index 0000000000..e69de29bb2
doc/guides/contributing/coding_style.rst +3 -0
index 648849899d..a42cd3d58d 100644
@@ -880,6 +880,9 @@ All Python code should be compliant with
 `PEP8 (Style Guide for Python Code) <https://www.python.org/dev/peps/pep-0008/>`_.
 
 The ``pep8`` tool can be used for testing compliance with the guidelines.
+Note that line lengths are acceptable up to 100 characters, which is in line with C recommendations.
+
+..
 
 Integrating with the Build System
 ---------------------------------
Signature · 1 line
2.34.1
#13 lore raw

PATCH v2 2/2 dts: reformat to 100 line length

Reformat to 100 from the previous 88 to unify with C recommendations.

---
 dts/framework/config/__init__.py              | 20 ++-----
 dts/framework/dts.py                          | 12 +---
 dts/framework/exception.py                    |  3 +-
 dts/framework/remote_session/__init__.py      |  4 +-
 dts/framework/remote_session/linux_session.py | 39 ++++---------
 dts/framework/remote_session/posix_session.py | 30 +++-------
 .../remote/interactive_remote_session.py      |  7 +--
 .../remote/interactive_shell.py               |  4 +-
 .../remote_session/remote/remote_session.py   |  8 +--
 .../remote_session/remote/ssh_session.py      | 16 ++----
 .../remote_session/remote/testpmd_shell.py    |  8 +--
 dts/framework/settings.py                     |  4 +-
 dts/framework/test_result.py                  | 16 ++----
 dts/framework/test_suite.py                   | 57 +++++--------------
 .../capturing_traffic_generator.py            |  4 +-
 dts/framework/testbed_model/hw/cpu.py         | 20 ++-----
 dts/framework/testbed_model/node.py           |  8 +--
 dts/framework/testbed_model/scapy.py          | 16 ++----
 dts/framework/testbed_model/sut_node.py       | 38 ++++---------
 dts/framework/testbed_model/tg_node.py        |  7 +--
 dts/framework/utils.py                        | 20 ++-----
 dts/pyproject.toml                            |  4 +-
 dts/tests/TestSuite_hello_world.py            |  4 +-
 dts/tests/TestSuite_smoke_tests.py            | 11 +---
 24 files changed, 93 insertions(+), 267 deletions(-)
dts/framework/config/__init__.py +5 -15
index cb7e00ba34..9b32cf0532 100644
@@ -140,9 +140,7 @@ def from_dict(d: dict) -> Union["SutNodeConfiguration", "TGNodeConfiguration"]:
 
         if "traffic_generator" in d:
             return TGNodeConfiguration(
-                traffic_generator=TrafficGeneratorConfig.from_dict(
-                    d["traffic_generator"]
-                ),
+                traffic_generator=TrafficGeneratorConfig.from_dict(d["traffic_generator"]),
                 **common_config,
             )
         else:
@@ -249,9 +247,7 @@ def from_dict(
         build_targets: list[BuildTargetConfiguration] = list(
             map(BuildTargetConfiguration.from_dict, d["build_targets"])
         )
-        test_suites: list[TestSuiteConfig] = list(
-            map(TestSuiteConfig.from_dict, d["test_suites"])
-        )
+        test_suites: list[TestSuiteConfig] = list(map(TestSuiteConfig.from_dict, d["test_suites"]))
         sut_name = d["system_under_test_node"]["node_name"]
         skip_smoke_tests = d.get("skip_smoke_tests", False)
         assert sut_name in node_map, f"Unknown SUT {sut_name} in execution {d}"
@@ -268,9 +264,7 @@ def from_dict(
         ), f"Invalid TG configuration {traffic_generator_node}"
 
         vdevs = (
-            d["system_under_test_node"]["vdevs"]
-            if "vdevs" in d["system_under_test_node"]
-            else []
+            d["system_under_test_node"]["vdevs"] if "vdevs" in d["system_under_test_node"] else []
         )
         return ExecutionConfiguration(
             build_targets=build_targets,
@@ -299,9 +293,7 @@ def from_dict(d: dict) -> "Configuration":
         assert len(nodes) == len(node_map), "Duplicate node names are not allowed"
 
         executions: list[ExecutionConfiguration] = list(
-            map(
-                ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d]
-            )
+            map(ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d])
         )
 
         return Configuration(executions=executions)
@@ -315,9 +307,7 @@ def load_config() -> Configuration:
     with open(SETTINGS.config_file_path, "r") as f:
         config_data = yaml.safe_load(f)
 
-    schema_path = os.path.join(
-        pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json"
-    )
+    schema_path = os.path.join(pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json")
 
     with open(schema_path, "r") as f:
         schema = json.load(f)
dts/framework/dts.py +3 -9
index f773f0c38d..e2aada5a23 100644
@@ -92,9 +92,7 @@ def _run_execution(
     Run the given execution. This involves running the execution setup as well as
     running all build targets in the given execution.
     """
-    dts_logger.info(
-        f"Running execution with SUT '{execution.system_under_test_node.name}'."
-    )
+    dts_logger.info(f"Running execution with SUT '{execution.system_under_test_node.name}'.")
     execution_result = result.add_execution(sut_node.config)
     execution_result.add_sut_info(sut_node.node_info)
 
@@ -107,9 +105,7 @@ def _run_execution(
 
     else:
         for build_target in execution.build_targets:
-            _run_build_target(
-                sut_node, tg_node, build_target, execution, execution_result
-            )
+            _run_build_target(sut_node, tg_node, build_target, execution, execution_result)
 
     finally:
         try:
@@ -170,9 +166,7 @@ def _run_all_suites(
         execution.test_suites[:0] = [TestSuiteConfig.from_dict("smoke_tests")]
     for test_suite_config in execution.test_suites:
         try:
-            _run_single_suite(
-                sut_node, tg_node, execution, build_target_result, test_suite_config
-            )
+            _run_single_suite(sut_node, tg_node, execution, build_target_result, test_suite_config)
         except BlockingTestSuiteError as e:
             dts_logger.exception(
                 f"An error occurred within {test_suite_config.test_suite}. "
dts/framework/exception.py +1 -2
index 001a5a5496..59cf9fd12a 100644
@@ -117,8 +117,7 @@ def __init__(self, command: str, command_return_code: int):
 
     def __str__(self) -> str:
         return (
-            f"Command {self.command} returned a non-zero exit code: "
-            f"{self.command_return_code}"
+            f"Command {self.command} returned a non-zero exit code: " f"{self.command_return_code}"
         )
 
 
dts/framework/remote_session/__init__.py +1 -3
index 00b6d1f03a..6124417bd7 100644
@@ -30,9 +30,7 @@
 )
 
 
-def create_session(
-    node_config: NodeConfiguration, name: str, logger: DTSLOG
-) -> OSSession:
+def create_session(node_config: NodeConfiguration, name: str, logger: DTSLOG) -> OSSession:
     match node_config.os:
         case OS.linux:
             return LinuxSession(node_config, name, logger)
dts/framework/remote_session/linux_session.py +10 -29
index a3f1a6bf3b..aa76e25436 100644
@@ -82,9 +82,7 @@ def setup_hugepages(self, hugepage_amount: int, force_first_numa: bool) -> None:
         self._mount_huge_pages()
 
     def _get_hugepage_size(self) -> int:
-        hugepage_size = self.send_command(
-            "awk '/Hugepagesize/ {print $2}' /proc/meminfo"
-        ).stdout
+        hugepage_size = self.send_command("awk '/Hugepagesize/ {print $2}' /proc/meminfo").stdout
         return int(hugepage_size)
 
     def _get_hugepages_total(self) -> int:
@@ -120,13 +118,9 @@ def _supports_numa(self) -> bool:
         # there's no reason to do any numa specific configuration)
         return len(self._numa_nodes) > 1
 
-    def _configure_huge_pages(
-        self, amount: int, size: int, force_first_numa: bool
-    ) -> None:
+    def _configure_huge_pages(self, amount: int, size: int, force_first_numa: bool) -> None:
         self._logger.info("Configuring Hugepages.")
-        hugepage_config_path = (
-            f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
-        )
+        hugepage_config_path = f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
         if force_first_numa and self._supports_numa():
             # clear non-numa hugepages
             self.send_command(f"echo 0 | tee {hugepage_config_path}", privileged=True)
@@ -135,24 +129,18 @@ def _configure_huge_pages(
                 f"/hugepages-{size}kB/nr_hugepages"
             )
 
-        self.send_command(
-            f"echo {amount} | tee {hugepage_config_path}", privileged=True
-        )
+        self.send_command(f"echo {amount} | tee {hugepage_config_path}", privileged=True)
 
     def update_ports(self, ports: list[Port]) -> None:
         self._logger.debug("Gathering port info.")
         for port in ports:
-            assert (
-                port.node == self.name
-            ), "Attempted to gather port info on the wrong node"
+            assert port.node == self.name, "Attempted to gather port info on the wrong node"
 
         port_info_list = self._get_lshw_info()
         for port in ports:
             for port_info in port_info_list:
                 if f"pci@{port.pci}" == port_info.get("businfo"):
-                    self._update_port_attr(
-                        port, port_info.get("logicalname"), "logical_name"
-                    )
+                    self._update_port_attr(port, port_info.get("logicalname"), "logical_name")
                     self._update_port_attr(port, port_info.get("serial"), "mac_address")
                     port_info_list.remove(port_info)
                     break
@@ -163,25 +151,18 @@ def _get_lshw_info(self) -> list[LshwOutput]:
         output = self.send_command("lshw -quiet -json -C network", verify=True)
         return json.loads(output.stdout)
 
-    def _update_port_attr(
-        self, port: Port, attr_value: str | None, attr_name: str
-    ) -> None:
+    def _update_port_attr(self, port: Port, attr_value: str | None, attr_name: str) -> None:
         if attr_value:
             setattr(port, attr_name, attr_value)
-            self._logger.debug(
-                f"Found '{attr_name}' of port {port.pci}: '{attr_value}'."
-            )
+            self._logger.debug(f"Found '{attr_name}' of port {port.pci}: '{attr_value}'.")
         else:
             self._logger.warning(
-                f"Attempted to get '{attr_name}' of port {port.pci}, "
-                f"but it doesn't exist."
+                f"Attempted to get '{attr_name}' of port {port.pci}, " f"but it doesn't exist."
             )
 
     def configure_port_state(self, port: Port, enable: bool) -> None:
         state = "up" if enable else "down"
-        self.send_command(
-            f"ip link set dev {port.logical_name} {state}", privileged=True
-        )
+        self.send_command(f"ip link set dev {port.logical_name} {state}", privileged=True)
 
     def configure_port_ip_address(
         self,
dts/framework/remote_session/posix_session.py +8 -22
index 5da0516e05..eb59252dd1 100644
@@ -94,8 +94,7 @@ def extract_remote_tarball(
         expected_dir: str | PurePath | None = None,
     ) -> None:
         self.send_command(
-            f"tar xfm {remote_tarball_path} "
-            f"-C {PurePosixPath(remote_tarball_path).parent}",
+            f"tar xfm {remote_tarball_path} " f"-C {PurePosixPath(remote_tarball_path).parent}",
             60,
         )
         if expected_dir:
@@ -125,8 +124,7 @@ def build_dpdk(
                 self._logger.info("Configuring DPDK build from scratch.")
                 self.remove_remote_dir(remote_dpdk_build_dir)
                 self.send_command(
-                    f"meson setup "
-                    f"{meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
+                    f"meson setup " f"{meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
                     timeout,
                     verify=True,
                     env=env_vars,
@@ -140,9 +138,7 @@ def build_dpdk(
             raise DPDKBuildError(f"DPDK build failed when doing '{e.command}'.")
 
     def get_dpdk_version(self, build_dir: str | PurePath) -> str:
-        out = self.send_command(
-            f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True
-        )
+        out = self.send_command(f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True)
         return out.stdout
 
     def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
@@ -156,9 +152,7 @@ def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
             self._check_dpdk_hugepages(dpdk_runtime_dirs)
             self._remove_dpdk_runtime_dirs(dpdk_runtime_dirs)
 
-    def _get_dpdk_runtime_dirs(
-        self, dpdk_prefix_list: Iterable[str]
-    ) -> list[PurePosixPath]:
+    def _get_dpdk_runtime_dirs(self, dpdk_prefix_list: Iterable[str]) -> list[PurePosixPath]:
         prefix = PurePosixPath("/var", "run", "dpdk")
         if not dpdk_prefix_list:
             remote_prefixes = self._list_remote_dirs(prefix)
@@ -174,9 +168,7 @@ def _list_remote_dirs(self, remote_path: str | PurePath) -> list[str] | None:
         Return a list of directories of the remote_dir.
         If remote_path doesn't exist, return None.
         """
-        out = self.send_command(
-            f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'"
-        ).stdout
+        out = self.send_command(f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'").stdout
         if "No such file or directory" in out:
             return None
         else:
@@ -200,9 +192,7 @@ def _remote_files_exists(self, remote_path: PurePath) -> bool:
         result = self.send_command(f"test -e {remote_path}")
         return not result.return_code
 
-    def _check_dpdk_hugepages(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _check_dpdk_hugepages(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             hugepage_info = PurePosixPath(dpdk_runtime_dir, "hugepage_info")
             if self._remote_files_exists(hugepage_info):
@@ -213,9 +203,7 @@ def _check_dpdk_hugepages(
                     self._logger.warning(out)
                     self._logger.warning("*******************************************")
 
-    def _remove_dpdk_runtime_dirs(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _remove_dpdk_runtime_dirs(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             self.remove_remote_dir(dpdk_runtime_dir)
 
@@ -245,6 +233,4 @@ def get_node_info(self) -> NodeInfo:
             SETTINGS.timeout,
         ).stdout.split("\n")
         kernel_version = self.send_command("uname -r", SETTINGS.timeout).stdout
-        return NodeInfo(
-            os_release_info[0].strip(), os_release_info[1].strip(), kernel_version
-        )
+        return NodeInfo(os_release_info[0].strip(), os_release_info[1].strip(), kernel_version)
dts/framework/remote_session/remote/interactive_remote_session.py +2 -5
index 9085a668e8..42c99b2525 100644
@@ -73,9 +73,7 @@ def __init__(self, node_config: NodeConfiguration, _logger: DTSLOG) -> None:
             f"Initializing interactive connection for {self.username}@{self.hostname}"
         )
         self._connect()
-        self._logger.info(
-            f"Interactive connection successful for {self.username}@{self.hostname}"
-        )
+        self._logger.info(f"Interactive connection successful for {self.username}@{self.hostname}")
 
     def _connect(self) -> None:
         """Establish a connection to the node.
@@ -108,8 +106,7 @@ def _connect(self) -> None:
                 self._logger.debug(traceback.format_exc())
                 self._logger.warning(e)
                 self._logger.info(
-                    "Retrying interactive session connection: "
-                    f"retry number {retry_attempt +1}"
+                    "Retrying interactive session connection: " f"retry number {retry_attempt +1}"
                 )
             else:
                 break
dts/framework/remote_session/remote/interactive_shell.py +1 -3
index c24376b2a8..4db19fb9b3 100644
@@ -85,9 +85,7 @@ def __init__(
         self._app_args = app_args
         self._start_application(get_privileged_command)
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """Starts a new interactive application based on the path to the app.
 
         This method is often overridden by subclasses as their process for
dts/framework/remote_session/remote/remote_session.py +2 -6
index 0647d93de4..719f7d1ef7 100644
@@ -96,9 +96,7 @@ def send_command(
         If verify is True, check the return code of the executed command
         and raise a RemoteCommandExecutionError if the command failed.
         """
-        self._logger.info(
-            f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else "")
-        )
+        self._logger.info(f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else ""))
         result = self._send_command(command, timeout, env)
         if verify and result.return_code:
             self._logger.debug(
@@ -112,9 +110,7 @@ def send_command(
         return result
 
     @abstractmethod
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """
         Use the underlying protocol to execute the command using optional env vars
         and return CommandResult.
dts/framework/remote_session/remote/ssh_session.py +4 -12
index 8d127f1601..1a7ee649ab 100644
@@ -80,9 +80,7 @@ def _connect(self) -> None:
                 if error not in errors:
                     errors.append(error)
 
-                self._logger.info(
-                    f"Retrying connection: retry number {retry_attempt + 1}."
-                )
+                self._logger.info(f"Retrying connection: retry number {retry_attempt + 1}.")
 
             else:
                 break
@@ -92,9 +90,7 @@ def _connect(self) -> None:
     def is_alive(self) -> bool:
         return self.session.is_connected
 
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """Send a command and return the result of the execution.
 
         Args:
@@ -107,9 +103,7 @@ def _send_command(
             SSHTimeoutError: The command execution timed out.
         """
         try:
-            output = self.session.run(
-                command, env=env, warn=True, hide=True, timeout=timeout
-            )
+            output = self.session.run(command, env=env, warn=True, hide=True, timeout=timeout)
 
         except (UnexpectedExit, ThreadException) as e:
             self._logger.exception(e)
@@ -119,9 +113,7 @@ def _send_command(
             self._logger.exception(e)
             raise SSHTimeoutError(command, e.result.stderr) from e
 
-        return CommandResult(
-            self.name, command, output.stdout, output.stderr, output.return_code
-        )
+        return CommandResult(self.name, command, output.stdout, output.stderr, output.return_code)
 
     def copy_from(
         self,
dts/framework/remote_session/remote/testpmd_shell.py +2 -6
index 1455b5a199..08ac311016 100644
@@ -21,13 +21,9 @@ class TestPmdShell(InteractiveShell):
     path: PurePath = PurePath("app", "dpdk-testpmd")
     dpdk_app: bool = True
     _default_prompt: str = "testpmd>"
-    _command_extra_chars: str = (
-        "\n"  # We want to append an extra newline to every command
-    )
+    _command_extra_chars: str = "\n"  # We want to append an extra newline to every command
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """See "_start_application" in InteractiveShell."""
         self._app_args += " -- -i"
         super()._start_application(get_privileged_command)
dts/framework/settings.py +1 -3
index cfa39d011b..aad444e99c 100644
@@ -170,9 +170,7 @@ def _get_settings() -> _Settings:
         timeout=parsed_args.timeout,
         verbose=(parsed_args.verbose == "Y"),
         skip_setup=(parsed_args.skip_setup == "Y"),
-        dpdk_tarball_path=Path(
-            DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir)
-        )
+        dpdk_tarball_path=Path(DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir))
         if not os.path.exists(parsed_args.tarball)
         else Path(parsed_args.tarball),
         compile_timeout=parsed_args.compile_timeout,
dts/framework/test_result.py +4 -12
index f0fbe80f6f..4c2e7e2418 100644
@@ -83,9 +83,7 @@ def __iadd__(self, other: Result) -> "Statistics":
         """
         self[other.name] += 1
         self["PASS RATE"] = (
-            float(self[Result.PASS.name])
-            * 100
-            / sum(self[result.name] for result in Result)
+            float(self[Result.PASS.name]) * 100 / sum(self[result.name] for result in Result)
         )
         return self
 
@@ -135,9 +133,7 @@ def _get_setup_teardown_errors(self) -> list[Exception]:
 
     def _get_inner_errors(self) -> list[Exception]:
         return [
-            error
-            for inner_result in self._inner_results
-            for error in inner_result.get_errors()
+            error for inner_result in self._inner_results for error in inner_result.get_errors()
         ]
 
     def get_errors(self) -> list[Exception]:
@@ -174,9 +170,7 @@ def add_stats(self, statistics: Statistics) -> None:
         statistics += self.result
 
     def __bool__(self) -> bool:
-        return (
-            bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
-        )
+        return bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
 
 
 class TestSuiteResult(BaseResult):
@@ -247,9 +241,7 @@ def __init__(self, sut_node: NodeConfiguration):
         super(ExecutionResult, self).__init__()
         self.sut_node = sut_node
 
-    def add_build_target(
-        self, build_target: BuildTargetConfiguration
-    ) -> BuildTargetResult:
+    def add_build_target(self, build_target: BuildTargetConfiguration) -> BuildTargetResult:
         build_target_result = BuildTargetResult(build_target)
         self._inner_results.append(build_target_result)
         return build_target_result
dts/framework/test_suite.py +14 -43

121 lines not on this page · raw message

dts/framework/testbed_model/capturing_traffic_generator.py +1 -3
index ab98987f8e..48d019ab21 100644
@@ -110,9 +110,7 @@ def send_packets_and_capture(
             duration,
         )
 
-        self._logger.debug(
-            f"Received packets: {get_packet_summaries(received_packets)}"
-        )
+        self._logger.debug(f"Received packets: {get_packet_summaries(received_packets)}")
         self._write_capture_from_packets(capture_name, received_packets)
         return received_packets
 
dts/framework/testbed_model/hw/cpu.py +5 -15
index d1918a12dc..cbc5fe7fff 100644
@@ -54,9 +54,7 @@ def __init__(self, lcore_list: list[int] | list[str] | list[LogicalCore] | str):
 
         # the input lcores may not be sorted
         self._lcore_list.sort()
-        self._lcore_str = (
-            f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
-        )
+        self._lcore_str = f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
 
     @property
     def lcore_list(self) -> list[int]:
@@ -70,15 +68,11 @@ def _get_consecutive_lcores_range(self, lcore_ids_list: list[int]) -> list[str]:
                 segment.append(lcore_id)
             else:
                 formatted_core_list.append(
-                    f"{segment[0]}-{segment[-1]}"
-                    if len(segment) > 1
-                    else f"{segment[0]}"
+                    f"{segment[0]}-{segment[-1]}" if len(segment) > 1 else f"{segment[0]}"
                 )
                 current_core_index = lcore_ids_list.index(lcore_id)
                 formatted_core_list.extend(
-                    self._get_consecutive_lcores_range(
-                        lcore_ids_list[current_core_index:]
-                    )
+                    self._get_consecutive_lcores_range(lcore_ids_list[current_core_index:])
                 )
                 segment.clear()
                 break
@@ -125,9 +119,7 @@ def __init__(
         self._filter_specifier = filter_specifier
 
         # sorting by core is needed in case hyperthreading is enabled
-        self._lcores_to_filter = sorted(
-            lcore_list, key=lambda x: x.core, reverse=not ascending
-        )
+        self._lcores_to_filter = sorted(lcore_list, key=lambda x: x.core, reverse=not ascending)
         self.filter()
 
     @abstractmethod
@@ -220,9 +212,7 @@ def _filter_cores_from_socket(
                 else:
                     # we have enough lcores per this core
                     continue
-            elif self._filter_specifier.cores_per_socket > len(
-                lcore_count_per_core_map
-            ):
+            elif self._filter_specifier.cores_per_socket > len(lcore_count_per_core_map):
                 # only add cores if we need more
                 lcore_count_per_core_map[lcore.core] = 1
                 filtered_lcores.append(lcore)
dts/framework/testbed_model/node.py +2 -6
index fc01e0bf8e..ef700d8114 100644
@@ -103,18 +103,14 @@ def _tear_down_execution(self) -> None:
         is not decorated so that the derived class doesn't have to use the decorator.
         """
 
-    def set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Perform the build target setup that will be done for each build target
         tested on this node.
         """
         self._set_up_build_target(build_target_config)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         This method exists to be optionally overwritten by derived classes and
         is not decorated so that the derived class doesn't have to use the decorator.
dts/framework/testbed_model/scapy.py +4 -12
index af0d4dbb25..7948424951 100644
@@ -96,9 +96,7 @@ def scapy_send_packets_and_capture(
     return [scapy_packet.build() for scapy_packet in sniffer.stop(join=True)]
 
 
-def scapy_send_packets(
-    xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str
-) -> None:
+def scapy_send_packets(xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str) -> None:
     """RPC function to send packets.
 
     The function is meant to be executed on the remote TG node.
@@ -197,9 +195,7 @@ class ScapyTrafficGenerator(CapturingTrafficGenerator):
     def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._config = config
         self._tg_node = tg_node
-        self._logger = getLogger(
-            f"{self._tg_node.name} {self._config.traffic_generator_type}"
-        )
+        self._logger = getLogger(f"{self._tg_node.name} {self._config.traffic_generator_type}")
 
         assert (
             self._tg_node.config.os == OS.linux
@@ -218,9 +214,7 @@ def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._start_xmlrpc_server_in_remote_python(xmlrpc_server_listen_port)
 
         # connect to the server
-        server_url = (
-            f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
-        )
+        server_url = f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
         self.rpc_server_proxy = xmlrpc.client.ServerProxy(
             server_url, allow_none=True, verbose=SETTINGS.verbose
         )
@@ -240,9 +234,7 @@ def _start_xmlrpc_server_in_remote_python(self, listen_port: int):
         src = inspect.getsource(QuittableXMLRPCServer)
         # Lines with only whitespace break the repl if in the middle of a function
         # or class, so strip all lines containing only whitespace
-        src = "\n".join(
-            [line for line in src.splitlines() if not line.isspace() and line != ""]
-        )
+        src = "\n".join([line for line in src.splitlines() if not line.isspace() and line != ""])
 
         spacing = "\n" * 4
 
dts/framework/testbed_model/sut_node.py +10 -28
index 202aebfd06..dfd8c755b4 100644
@@ -129,9 +129,7 @@ def remote_dpdk_build_dir(self) -> PurePath:
     @property
     def dpdk_version(self) -> str:
         if self._dpdk_version is None:
-            self._dpdk_version = self.main_session.get_dpdk_version(
-                self._remote_dpdk_dir
-            )
+            self._dpdk_version = self.main_session.get_dpdk_version(self._remote_dpdk_dir)
         return self._dpdk_version
 
     @property
@@ -149,8 +147,7 @@ def compiler_version(self) -> str:
                 )
             else:
                 self._logger.warning(
-                    "Failed to get compiler version because"
-                    "_build_target_config is None."
+                    "Failed to get compiler version because" "_build_target_config is None."
                 )
                 return ""
         return self._compiler_version
@@ -163,9 +160,7 @@ def get_build_target_info(self) -> BuildTargetInfo:
     def _guess_dpdk_remote_dir(self) -> PurePath:
         return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Setup DPDK on the SUT node.
         """
@@ -177,22 +172,17 @@ def _set_up_build_target(
         self._copy_dpdk_tarball()
         self._build_dpdk()
 
-    def _configure_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _configure_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Populate common environment variables and set build target config.
         """
         self._env_vars = {}
         self._build_target_config = build_target_config
-        self._env_vars.update(
-            self.main_session.get_dpdk_build_env_vars(build_target_config.arch)
-        )
+        self._env_vars.update(self.main_session.get_dpdk_build_env_vars(build_target_config.arch))
         self._env_vars["CC"] = build_target_config.compiler.name
         if build_target_config.compiler_wrapper:
             self._env_vars["CC"] = (
-                f"'{build_target_config.compiler_wrapper} "
-                f"{build_target_config.compiler.name}'"
+                f"'{build_target_config.compiler_wrapper} " f"{build_target_config.compiler.name}'"
             )
 
     @Node.skip_setup
@@ -224,9 +214,7 @@ def _copy_dpdk_tarball(self) -> None:
         self.main_session.remove_remote_dir(self._remote_dpdk_dir)
 
         # then extract to remote path
-        self.main_session.extract_remote_tarball(
-            remote_tarball_path, self._remote_dpdk_dir
-        )
+        self.main_session.extract_remote_tarball(remote_tarball_path, self._remote_dpdk_dir)
 
     @Node.skip_setup
     def _build_dpdk(self) -> None:
@@ -263,9 +251,7 @@ def build_dpdk_app(self, app_name: str, **meson_dpdk_args: str | bool) -> PurePa
         )
 
         if app_name == "all":
-            return self.main_session.join_remote_path(
-                self.remote_dpdk_build_dir, "examples"
-            )
+            return self.main_session.join_remote_path(self.remote_dpdk_build_dir, "examples")
         return self.main_session.join_remote_path(
             self.remote_dpdk_build_dir, "examples", f"dpdk-{app_name}"
         )
@@ -319,9 +305,7 @@ def create_eal_parameters(
                 '-c 0xf -a 0000:88:00.0 --file-prefix=dpdk_1112_20190809143420';
         """
 
-        lcore_list = LogicalCoreList(
-            self.filter_lcores(lcore_filter_specifier, ascending_cores)
-        )
+        lcore_list = LogicalCoreList(self.filter_lcores(lcore_filter_specifier, ascending_cores))
 
         if append_prefix_timestamp:
             prefix = f"{prefix}_{self._dpdk_timestamp}"
@@ -386,6 +370,4 @@ def create_interactive_shell(
                 self.remote_dpdk_build_dir, shell_cls.path
             )
 
-        return super().create_interactive_shell(
-            shell_cls, timeout, privileged, str(eal_parameters)
-        )
+        return super().create_interactive_shell(shell_cls, timeout, privileged, str(eal_parameters))
dts/framework/testbed_model/tg_node.py +2 -5
index 27025cfa31..dca4ec0849 100644
@@ -45,9 +45,7 @@ class TGNode(Node):
 
     def __init__(self, node_config: TGNodeConfiguration):
         super(TGNode, self).__init__(node_config)
-        self.traffic_generator = create_traffic_generator(
-            self, node_config.traffic_generator
-        )
+        self.traffic_generator = create_traffic_generator(self, node_config.traffic_generator)
         self._logger.info(f"Created node: {self.name}")
 
     def send_packet_and_capture(
@@ -94,6 +92,5 @@ def create_traffic_generator(
             return ScapyTrafficGenerator(tg_node, traffic_generator_config)
         case _:
             raise ConfigurationError(
-                "Unknown traffic generator: "
-                f"{traffic_generator_config.traffic_generator_type}"
+                "Unknown traffic generator: " f"{traffic_generator_config.traffic_generator_type}"
             )
dts/framework/utils.py +5 -15
index d27c2c5b5f..d098d364ff 100644
@@ -19,9 +19,7 @@
 
 class StrEnum(Enum):
     @staticmethod
-    def _generate_next_value_(
-        name: str, start: int, count: int, last_values: object
-    ) -> str:
+    def _generate_next_value_(name: str, start: int, count: int, last_values: object) -> str:
         return name
 
     def __str__(self) -> str:
@@ -32,9 +30,7 @@ def __str__(self) -> str:
 
 
 def check_dts_python_version() -> None:
-    if sys.version_info.major < 3 or (
-        sys.version_info.major == 3 and sys.version_info.minor < 10
-    ):
+    if sys.version_info.major < 3 or (sys.version_info.major == 3 and sys.version_info.minor < 10):
         print(
             RED(
                 (
@@ -60,9 +56,7 @@ def expand_range(range_str: str) -> list[int]:
         range_boundaries = range_str.split("-")
         # will throw an exception when items in range_boundaries can't be converted,
         # serving as type check
-        expanded_range.extend(
-            range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1)
-        )
+        expanded_range.extend(range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1))
 
     return expanded_range
 
@@ -71,9 +65,7 @@ def get_packet_summaries(packets: list[Packet]):
     if len(packets) == 1:
         packet_summaries = packets[0].summary()
     else:
-        packet_summaries = json.dumps(
-            list(map(lambda pkt: pkt.summary(), packets)), indent=4
-        )
+        packet_summaries = json.dumps(list(map(lambda pkt: pkt.summary(), packets)), indent=4)
     return f"Packet contents: \n{packet_summaries}"
 
 
@@ -94,9 +86,7 @@ class MesonArgs(object):
     _default_library: str
 
     def __init__(self, default_library: str | None = None, **dpdk_args: str | bool):
-        self._default_library = (
-            f"--default-library={default_library}" if default_library else ""
-        )
+        self._default_library = f"--default-library={default_library}" if default_library else ""
         self._dpdk_args = " ".join(
             (
                 f"-D{dpdk_arg_name}={dpdk_arg_value}"
dts/pyproject.toml +2 -2
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
 [tool.pylama]
 linters = "mccabe,pycodestyle,pyflakes"
 format = "pylint"
-max_line_length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+max_line_length = 100
 
 [tool.mypy]
 python_version = "3.10"
@@ -55,4 +55,4 @@ profile = "black"
 [tool.black]
 target-version = ['py310']
 include = '\.pyi?$'
-line-length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length = 100
dts/tests/TestSuite_hello_world.py +1 -3
index 7e3d95c0cf..768ba1cfa8 100644
@@ -34,9 +34,7 @@ def test_hello_world_single_core(self) -> None:
         # get the first usable core
         lcore_amount = LogicalCoreCount(1, 1, 1)
         lcores = LogicalCoreCountFilter(self.sut_node.lcores, lcore_amount).filter()
-        eal_para = self.sut_node.create_eal_parameters(
-            lcore_filter_specifier=lcore_amount
-        )
+        eal_para = self.sut_node.create_eal_parameters(lcore_filter_specifier=lcore_amount)
         result = self.sut_node.run_dpdk_app(self.app_helloworld_path, eal_para)
         self.verify(
             f"hello from core {int(lcores[0])}" in result.stdout,
dts/tests/TestSuite_smoke_tests.py +3 -8
index 4a269df75b..36119e6469 100644
@@ -45,13 +45,10 @@ def test_driver_tests(self) -> None:
         for dev in self.sut_node.virtual_devices:
             vdev_args += f"--vdev {dev} "
         vdev_args = vdev_args[:-1]
-        driver_tests_command = (
-            f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
-        )
+        driver_tests_command = f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
         if vdev_args:
             self._logger.info(
-                "Running driver tests with the following virtual "
-                f"devices: {vdev_args}"
+                "Running driver tests with the following virtual " f"devices: {vdev_args}"
             )
             driver_tests_command += f' --test-args "{vdev_args}"'
 
@@ -67,9 +64,7 @@ def test_devices_listed_in_testpmd(self) -> None:
         Test:
             Uses testpmd driver to verify that devices have been found by testpmd.
         """
-        testpmd_driver = self.sut_node.create_interactive_shell(
-            TestPmdShell, privileged=True
-        )
+        testpmd_driver = self.sut_node.create_interactive_shell(TestPmdShell, privileged=True)
         dev_list = [str(x) for x in testpmd_driver.get_devices()]
         for nic in self.nics_in_node:
             self.verify(
Signature · 1 line
2.34.1
#14 lore raw

Re: [PATCH v2 2/2] dts: reformat to 100 line length

I think this is a good idea because of all the weird places we had to break things up with the 88 character cap. I do however also notice that in some cases where these multi-line strings were combined back into one line it would just have two string literals on the same line rather than them being just oen string. I tried to point out everywhere I found this behavoir below as it looks a little awkward in the code.

It looks good to me otherwise though.

Quoted 157 lines · Juraj Linkeš

Reformat to 100 from the previous 88 to unify with C recommendations.

---
 dts/framework/config/__init__.py              | 20 ++-----
 dts/framework/dts.py                          | 12 +---
 dts/framework/exception.py                    |  3 +-
 dts/framework/remote_session/__init__.py      |  4 +-
 dts/framework/remote_session/linux_session.py | 39 ++++---------
 dts/framework/remote_session/posix_session.py | 30 +++-------
 .../remote/interactive_remote_session.py      |  7 +--
 .../remote/interactive_shell.py               |  4 +-
 .../remote_session/remote/remote_session.py   |  8 +--
 .../remote_session/remote/ssh_session.py      | 16 ++----
 .../remote_session/remote/testpmd_shell.py    |  8 +--
 dts/framework/settings.py                     |  4 +-
 dts/framework/test_result.py                  | 16 ++----
 dts/framework/test_suite.py                   | 57 +++++--------------
 .../capturing_traffic_generator.py            |  4 +-
 dts/framework/testbed_model/hw/cpu.py         | 20 ++-----
 dts/framework/testbed_model/node.py           |  8 +--
 dts/framework/testbed_model/scapy.py          | 16 ++----
 dts/framework/testbed_model/sut_node.py       | 38 ++++---------
 dts/framework/testbed_model/tg_node.py        |  7 +--
 dts/framework/utils.py                        | 20 ++-----
 dts/pyproject.toml                            |  4 +-
 dts/tests/TestSuite_hello_world.py            |  4 +-
 dts/tests/TestSuite_smoke_tests.py            | 11 +---
 24 files changed, 93 insertions(+), 267 deletions(-)
dts/framework/config/__init__.py +0 -0
index cb7e00ba34..9b32cf0532 100644
@@ -140,9 +140,7 @@ def from_dict(d: dict) ->

Union["SutNodeConfiguration", "TGNodeConfiguration"]:

if "traffic_generator" in d:
return TGNodeConfiguration(

dts/framework/config/__init__.py +1 -3
-                traffic_generator=TrafficGeneratorConfig.from_dict(
-                    d["traffic_generator"]
-                ),
+

traffic_generator=TrafficGeneratorConfig.from_dict(d["traffic_generator"]),

                 **common_config,
             )
         else:
dts/framework/config/__init__.py +1 -3
@@ -249,9 +247,7 @@ def from_dict(
         build_targets: list[BuildTargetConfiguration] = list(
             map(BuildTargetConfiguration.from_dict, d["build_targets"])
         )
-        test_suites: list[TestSuiteConfig] = list(
-            map(TestSuiteConfig.from_dict, d["test_suites"])
-        )
+        test_suites: list[TestSuiteConfig] =
 list(map(TestSuiteConfig.from_dict, d["test_suites"]))
         sut_name = d["system_under_test_node"]["node_name"]
         skip_smoke_tests = d.get("skip_smoke_tests", False)

assert sut_name in node_map, f"Unknown SUT {sut_name} in
execution {d}"

dts/framework/config/__init__.py +1 -3
@@ -268,9 +264,7 @@ def from_dict(
         ), f"Invalid TG configuration {traffic_generator_node}"
 
         vdevs = (
-            d["system_under_test_node"]["vdevs"]
-            if "vdevs" in d["system_under_test_node"]
-            else []
+            d["system_under_test_node"]["vdevs"] if "vdevs" in

d["system_under_test_node"] else []

         )
         return ExecutionConfiguration(
             build_targets=build_targets,
dts/framework/config/__init__.py +0 -0
@@ -299,9 +293,7 @@ def from_dict(d: dict) -> "Configuration":
         assert len(nodes) == len(node_map), "Duplicate node names are not

allowed"

         executions: list[ExecutionConfiguration] = list(
dts/framework/config/__init__.py +0 -2
-            map(
-                ExecutionConfiguration.from_dict, d["executions"],

[node_map for _ in d]

dts/framework/config/__init__.py +1 -1
-            )
+            map(ExecutionConfiguration.from_dict, d["executions"],

[node_map for _ in d])

         )

         return Configuration(executions=executions)
dts/framework/config/__init__.py +1 -3
@@ -315,9 +307,7 @@ def load_config() -> Configuration:
     with open(SETTINGS.config_file_path, "r") as f:
         config_data = yaml.safe_load(f)
 
-    schema_path = os.path.join(
-        pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json"
-    )
+    schema_path = os.path.join(pathlib.Path(__file__).parent.resolve(),
 "conf_yaml_schema.json")
 
     with open(schema_path, "r") as f:

schema = json.load(f)

dts/framework/dts.py +0 -0
index f773f0c38d..e2aada5a23 100644
@@ -92,9 +92,7 @@ def _run_execution(
     Run the given execution. This involves running the execution setup as

well as
running all build targets in the given execution. """

dts/framework/dts.py +0 -2
-    dts_logger.info(
-        f"Running execution with SUT '{

execution.system_under_test_node.name}'."

dts/framework/dts.py +1 -1
-    )
+    dts_logger.info(f"Running execution with SUT '{

execution.system_under_test_node.name}'.")
execution_result = result.add_execution(sut_node.config) execution_result.add_sut_info(sut_node.node_info)

dts/framework/dts.py +0 -2
@@ -107,9 +105,7 @@ def _run_execution(
 
     else:
         for build_target in execution.build_targets:
-            _run_build_target(
-                sut_node, tg_node, build_target, execution,

execution_result

dts/framework/dts.py +1 -1
-            )
+            _run_build_target(sut_node, tg_node, build_target, execution,

execution_result)

finally:
try:

dts/framework/dts.py +0 -0
@@ -170,9 +166,7 @@ def _run_all_suites(
         execution.test_suites[:0] =

[TestSuiteConfig.from_dict("smoke_tests")]
for test_suite_config in execution.test_suites:
try:

dts/framework/dts.py +0 -2
-            _run_single_suite(
-                sut_node, tg_node, execution, build_target_result,

test_suite_config

dts/framework/dts.py +1 -1
-            )
+            _run_single_suite(sut_node, tg_node, execution,

build_target_result, test_suite_config)
except BlockingTestSuiteError as e:
dts_logger.exception(
f"An error occurred within
{test_suite_config.test_suite}. "

dts/framework/exception.py +0 -0
index 001a5a5496..59cf9fd12a 100644
@@ -117,8 +117,7 @@ def __init__(self, command: str, command_return_code:

int):

     def __str__(self) -> str:
         return (
dts/framework/exception.py +1 -2
-            f"Command {self.command} returned a non-zero exit code: "
-            f"{self.command_return_code}"
+            f"Command {self.command} returned a non-zero exit code: "
Quoted 2 lines

f"{self.command_return_code}"

If you modify this to be on the same line you actually don't need the separate string on this line. The line could instead be the following:

f"Command {self.command} returned a non-zero exit code:
{self.command_return_code}"

Quoted 111 lines
         )
dts/framework/remote_session/__init__.py +1 -3
index 00b6d1f03a..6124417bd7 100644
@@ -30,9 +30,7 @@
 )
 
 
-def create_session(
-    node_config: NodeConfiguration, name: str, logger: DTSLOG
-) -> OSSession:
+def create_session(node_config: NodeConfiguration, name: str, logger:

DTSLOG) -> OSSession:
match node_config.os:
case OS.linux:
return LinuxSession(node_config, name, logger)

dts/framework/remote_session/linux_session.py +0 -0
index a3f1a6bf3b..aa76e25436 100644
@@ -82,9 +82,7 @@ def setup_hugepages(self, hugepage_amount: int,

force_first_numa: bool) -> None:

         self._mount_huge_pages()

     def _get_hugepage_size(self) -> int:
dts/framework/remote_session/linux_session.py +1 -3
-        hugepage_size = self.send_command(
-            "awk '/Hugepagesize/ {print $2}' /proc/meminfo"
-        ).stdout
+        hugepage_size = self.send_command("awk '/Hugepagesize/ {print

$2}' /proc/meminfo").stdout

         return int(hugepage_size)

     def _get_hugepages_total(self) -> int:
dts/framework/remote_session/linux_session.py +1 -3
@@ -120,13 +118,9 @@ def _supports_numa(self) -> bool:
         # there's no reason to do any numa specific configuration)
         return len(self._numa_nodes) > 1
 
-    def _configure_huge_pages(
-        self, amount: int, size: int, force_first_numa: bool
-    ) -> None:
+    def _configure_huge_pages(self, amount: int, size: int,

force_first_numa: bool) -> None:
self._logger.info("Configuring Hugepages.")

dts/framework/remote_session/linux_session.py +1 -3
-        hugepage_config_path = (
-            f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
-        )
+        hugepage_config_path =

f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
if force_first_numa and self._supports_numa():
# clear non-numa hugepages self.send_command(f"echo 0 | tee {hugepage_config_path}",
privileged=True)

dts/framework/remote_session/linux_session.py +2 -6
@@ -135,24 +129,18 @@ def _configure_huge_pages(
                 f"/hugepages-{size}kB/nr_hugepages"
             )
 
-        self.send_command(
-            f"echo {amount} | tee {hugepage_config_path}", privileged=True
-        )
+        self.send_command(f"echo {amount} | tee {hugepage_config_path}",
 privileged=True)
 
     def update_ports(self, ports: list[Port]) -> None:
         self._logger.debug("Gathering port info.")
         for port in ports:
-            assert (
-                port.node == self.name
-            ), "Attempted to gather port info on the wrong node"
+            assert port.node == self.name, "Attempted to gather port

info on the wrong node"

port_info_list = self._get_lshw_info()
for port in ports:
for port_info in port_info_list:
if f"pci@{port.pci}" == port_info.get("businfo"):

dts/framework/remote_session/linux_session.py +1 -3
-                    self._update_port_attr(
-                        port, port_info.get("logicalname"), "logical_name"
-                    )
+                    self._update_port_attr(port,

port_info.get("logicalname"), "logical_name")
self._update_port_attr(port, port_info.get("serial"),
"mac_address")
port_info_list.remove(port_info)
break

dts/framework/remote_session/linux_session.py +1 -3
@@ -163,25 +151,18 @@ def _get_lshw_info(self) -> list[LshwOutput]:
         output = self.send_command("lshw -quiet -json -C network",
 verify=True)
         return json.loads(output.stdout)
 
-    def _update_port_attr(
-        self, port: Port, attr_value: str | None, attr_name: str
-    ) -> None:
+    def _update_port_attr(self, port: Port, attr_value: str | None,

attr_name: str) -> None:
if attr_value:
setattr(port, attr_name, attr_value)

dts/framework/remote_session/linux_session.py +1 -3
-            self._logger.debug(
-                f"Found '{attr_name}' of port {port.pci}: '{attr_value}'."
-            )
+            self._logger.debug(f"Found '{attr_name}' of port {port.pci}:

'{attr_value}'.")

         else:
             self._logger.warning(
dts/framework/remote_session/linux_session.py +1 -2
-                f"Attempted to get '{attr_name}' of port {port.pci}, "
-                f"but it doesn't exist."
+                f"Attempted to get '{attr_name}' of port {port.pci}, "
Quoted 2 lines

f"but it doesn't exist."

This is another case where the two different strings aren't needed

Quoted 19 lines
             )

     def configure_port_state(self, port: Port, enable: bool) -> None:
         state = "up" if enable else "down"
dts/framework/remote_session/linux_session.py +0 -2
-        self.send_command(
-            f"ip link set dev {port.logical_name} {state}",

privileged=True

dts/framework/remote_session/linux_session.py +1 -1
-        )
+        self.send_command(f"ip link set dev {port.logical_name} {state}",

privileged=True)

     def configure_port_ip_address(
         self,
dts/framework/remote_session/posix_session.py +0 -0
index 5da0516e05..eb59252dd1 100644

dts/framework/remote_session/posix_session.py def extract_remote_tarball( · line 99

Quoted 8 lines
dts/framework/remote_session/posix_session.py +1 -2
@@ -94,8 +94,7 @@ def extract_remote_tarball(
         expected_dir: str | PurePath | None = None,
     ) -> None:
         self.send_command(
-            f"tar xfm {remote_tarball_path} "
-            f"-C {PurePosixPath(remote_tarball_path).parent}",
+            f"tar xfm {remote_tarball_path} " f"-C
 {PurePosixPath(remote_tarball_path).parent}",
 

Double string here as well.

dts/framework/remote_session/posix_session.py def build_dpdk( · line 130

Quoted 13 lines
dts/framework/remote_session/posix_session.py +0 -0
             60,
         )
         if expected_dir:
dts/framework/remote_session/posix_session.py +1 -2
@@ -125,8 +124,7 @@ def build_dpdk(
                 self._logger.info("Configuring DPDK build from scratch.")
                 self.remove_remote_dir(remote_dpdk_build_dir)
                 self.send_command(
-                    f"meson setup "
-                    f"{meson_args} {remote_dpdk_dir}
 {remote_dpdk_build_dir}",
+                    f"meson setup " f"{meson_args} {remote_dpdk_dir}
 {remote_dpdk_build_dir}",
 

Double string.

Quoted 110 lines

timeout,
verify=True,
env=env_vars,

dts/framework/remote_session/posix_session.py +0 -2
@@ -140,9 +138,7 @@ def build_dpdk(
             raise DPDKBuildError(f"DPDK build failed when doing
 '{e.command}'.")
 
     def get_dpdk_version(self, build_dir: str | PurePath) -> str:
-        out = self.send_command(
-            f"cat {self.join_remote_path(build_dir, 'VERSION')}",

verify=True

dts/framework/remote_session/posix_session.py +1 -1
-        )
+        out = self.send_command(f"cat {self.join_remote_path(build_dir,

'VERSION')}", verify=True)

         return out.stdout

     def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) ->

None:

dts/framework/remote_session/posix_session.py +0 -0
@@ -156,9 +152,7 @@ def kill_cleanup_dpdk_apps(self, dpdk_prefix_list:

Iterable[str]) -> None:
self._check_dpdk_hugepages(dpdk_runtime_dirs) self._remove_dpdk_runtime_dirs(dpdk_runtime_dirs)

dts/framework/remote_session/posix_session.py +1 -3
-    def _get_dpdk_runtime_dirs(
-        self, dpdk_prefix_list: Iterable[str]
-    ) -> list[PurePosixPath]:
+    def _get_dpdk_runtime_dirs(self, dpdk_prefix_list: Iterable[str]) ->

list[PurePosixPath]:
prefix = PurePosixPath("/var", "run", "dpdk") if not dpdk_prefix_list:
remote_prefixes = self._list_remote_dirs(prefix)

dts/framework/remote_session/posix_session.py +0 -0
@@ -174,9 +168,7 @@ def _list_remote_dirs(self, remote_path: str |

PurePath) -> list[str] | None:
Return a list of directories of the remote_dir. If remote_path doesn't exist, return None. """

dts/framework/remote_session/posix_session.py +1 -3
-        out = self.send_command(
-            f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'"
-        ).stdout
+        out = self.send_command(f"ls -l {remote_path} | awk '/^d/ {{print

$NF}}'").stdout
if "No such file or directory" in out:
return None
else:

dts/framework/remote_session/posix_session.py +1 -4
@@ -200,9 +192,7 @@ def _remote_files_exists(self, remote_path: PurePath)
-> bool:
         result = self.send_command(f"test -e {remote_path}")
         return not result.return_code
 
-    def _check_dpdk_hugepages(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _check_dpdk_hugepages(self, dpdk_runtime_dirs: Iterable[str |

PurePath]) -> None:
for dpdk_runtime_dir in dpdk_runtime_dirs:
hugepage_info = PurePosixPath(dpdk_runtime_dir,
"hugepage_info")
if self._remote_files_exists(hugepage_info):

dts/framework/remote_session/posix_session.py +1 -3
@@ -213,9 +203,7 @@ def _check_dpdk_hugepages(
                     self._logger.warning(out)
 
 self._logger.warning("*******************************************")
 
-    def _remove_dpdk_runtime_dirs(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _remove_dpdk_runtime_dirs(self, dpdk_runtime_dirs: Iterable[str |

PurePath]) -> None:
for dpdk_runtime_dir in dpdk_runtime_dirs:
self.remove_remote_dir(dpdk_runtime_dir)

dts/framework/remote_session/posix_session.py +0 -0
@@ -245,6 +233,4 @@ def get_node_info(self) -> NodeInfo:
             SETTINGS.timeout,
         ).stdout.split("\n")
         kernel_version = self.send_command("uname -r",

SETTINGS.timeout).stdout

dts/framework/remote_session/posix_session.py +0 -2
-        return NodeInfo(
-            os_release_info[0].strip(), os_release_info[1].strip(),

kernel_version

dts/framework/remote_session/posix_session.py +1 -1
-        )
+        return NodeInfo(os_release_info[0].strip(),

os_release_info[1].strip(), kernel_version)
diff --git a/dts/framework/remote_session/remote/interactive_remote_session.py b/dts/framework/remote_session/remote/interactive_remote_session.py index 9085a668e8..42c99b2525 100644

dts/framework/remote_session/remote/interactive_remote_session.py +0 -0
@@ -73,9 +73,7 @@ def __init__(self, node_config: NodeConfiguration,

_logger: DTSLOG) -> None:
f"Initializing interactive connection for {self.username}@
{self.hostname}"

         )
         self._connect()
dts/framework/remote_session/remote/interactive_remote_session.py +0 -2
-        self._logger.info(
-            f"Interactive connection successful for {self.username}@

{self.hostname}"

dts/framework/remote_session/remote/interactive_remote_session.py +1 -1
-        )
+        self._logger.info(f"Interactive connection successful for

{self.username}@{self.hostname}")

def _connect(self) -> None:
"""Establish a connection to the node.

dts/framework/remote_session/remote/interactive_remote_session.py +1 -2
@@ -108,8 +106,7 @@ def _connect(self) -> None:
                 self._logger.debug(traceback.format_exc())
                 self._logger.warning(e)
                 self._logger.info(
-                    "Retrying interactive session connection: "
-                    f"retry number {retry_attempt +1}"
+                    "Retrying interactive session connection: " f"retry
Quoted 2 lines

number {retry_attempt +1}"

Here you can get rid of the double string, but you would have to make sure to add the f to the start to make the whole thing and f-string.

Quoted 284 lines
                 )
             else:
                 break
dts/framework/remote_session/remote/interactive_shell.py +1 -3
index c24376b2a8..4db19fb9b3 100644
@@ -85,9 +85,7 @@ def __init__(
         self._app_args = app_args
         self._start_application(get_privileged_command)
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str],

str] | None) -> None:
"""Starts a new interactive application based on the path to the
app.

This method is often overridden by subclasses as their process for

dts/framework/remote_session/remote/remote_session.py +1 -3
index 0647d93de4..719f7d1ef7 100644
@@ -96,9 +96,7 @@ def send_command(
         If verify is True, check the return code of the executed command
         and raise a RemoteCommandExecutionError if the command failed.
         """
-        self._logger.info(
-            f"Sending: '{command}'" + (f" with env vars: '{env}'" if env
 else "")
-        )
+        self._logger.info(f"Sending: '{command}'" + (f" with env vars:
 '{env}'" if env else ""))
         result = self._send_command(command, timeout, env)

if verify and result.return_code:
self._logger.debug(

dts/framework/remote_session/remote/remote_session.py +1 -3
@@ -112,9 +110,7 @@ def send_command(
         return result
 
     @abstractmethod
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict |

None) -> CommandResult:
"""
Use the underlying protocol to execute the command using optional
env vars
and return CommandResult.

dts/framework/remote_session/remote/ssh_session.py +0 -2
index 8d127f1601..1a7ee649ab 100644
@@ -80,9 +80,7 @@ def _connect(self) -> None:
                 if error not in errors:
                     errors.append(error)
 
-                self._logger.info(
-                    f"Retrying connection: retry number {retry_attempt +

1}."

dts/framework/remote_session/remote/ssh_session.py +1 -1
-                )
+                self._logger.info(f"Retrying connection: retry number

{retry_attempt + 1}.")

else:
break

dts/framework/remote_session/remote/ssh_session.py +1 -3
@@ -92,9 +90,7 @@ def _connect(self) -> None:
     def is_alive(self) -> bool:
         return self.session.is_connected
 
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict |

None) -> CommandResult:
"""Send a command and return the result of the execution.

Args:

dts/framework/remote_session/remote/ssh_session.py +1 -3
@@ -107,9 +103,7 @@ def _send_command(
             SSHTimeoutError: The command execution timed out.
         """
         try:
-            output = self.session.run(
-                command, env=env, warn=True, hide=True, timeout=timeout
-            )
+            output = self.session.run(command, env=env, warn=True,
 hide=True, timeout=timeout)
 
         except (UnexpectedExit, ThreadException) as e:

self._logger.exception(e)

dts/framework/remote_session/remote/ssh_session.py +0 -2
@@ -119,9 +113,7 @@ def _send_command(
             self._logger.exception(e)
             raise SSHTimeoutError(command, e.result.stderr) from e
 
-        return CommandResult(
-            self.name, command, output.stdout, output.stderr,

output.return_code

dts/framework/remote_session/remote/ssh_session.py +1 -1
-        )
+        return CommandResult(self.name, command, output.stdout,

output.stderr, output.return_code)

     def copy_from(
         self,
dts/framework/remote_session/remote/testpmd_shell.py +1 -3
index 1455b5a199..08ac311016 100644
@@ -21,13 +21,9 @@ class TestPmdShell(InteractiveShell):
     path: PurePath = PurePath("app", "dpdk-testpmd")
     dpdk_app: bool = True
     _default_prompt: str = "testpmd>"
-    _command_extra_chars: str = (
-        "\n"  # We want to append an extra newline to every command
-    )
+    _command_extra_chars: str = "\n"  # We want to append an extra

newline to every command

dts/framework/remote_session/remote/testpmd_shell.py +1 -3
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str],

str] | None) -> None:
"""See "_start_application" in InteractiveShell.""" self._app_args += " -- -i" super()._start_application(get_privileged_command)

dts/framework/settings.py +1 -3
index cfa39d011b..aad444e99c 100644
@@ -170,9 +170,7 @@ def _get_settings() -> _Settings:
         timeout=parsed_args.timeout,
         verbose=(parsed_args.verbose == "Y"),
         skip_setup=(parsed_args.skip_setup == "Y"),
-        dpdk_tarball_path=Path(
-            DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir)
-        )
+        dpdk_tarball_path=Path(DPDKGitTarball(parsed_args.tarball,
 parsed_args.output_dir))
         if not os.path.exists(parsed_args.tarball)
         else Path(parsed_args.tarball),

compile_timeout=parsed_args.compile_timeout,

dts/framework/test_result.py +1 -3
index f0fbe80f6f..4c2e7e2418 100644
@@ -83,9 +83,7 @@ def __iadd__(self, other: Result) -> "Statistics":
         """
         self[other.name] += 1
         self["PASS RATE"] = (
-            float(self[Result.PASS.name])
-            * 100
-            / sum(self[result.name] for result in Result)
+            float(self[Result.PASS.name]) * 100 / sum(self[result.name]
 for result in Result)
         )
         return self
@@ -135,9 +133,7 @@ def _get_setup_teardown_errors(self) ->

list[Exception]:

     def _get_inner_errors(self) -> list[Exception]:
         return [
dts/framework/test_result.py +1 -3
-            error
-            for inner_result in self._inner_results
-            for error in inner_result.get_errors()
+            error for inner_result in self._inner_results for error in

inner_result.get_errors()

         ]

     def get_errors(self) -> list[Exception]:
dts/framework/test_result.py +1 -3
@@ -174,9 +170,7 @@ def add_stats(self, statistics: Statistics) -> None:
         statistics += self.result
 
     def __bool__(self) -> bool:
-        return (
-            bool(self.setup_result) and bool(self.teardown_result) and
 bool(self.result)
-        )
+        return bool(self.setup_result) and bool(self.teardown_result) and
 bool(self.result)
 

class TestSuiteResult(BaseResult):

dts/framework/test_result.py +1 -3
@@ -247,9 +241,7 @@ def __init__(self, sut_node: NodeConfiguration):
         super(ExecutionResult, self).__init__()
         self.sut_node = sut_node
 
-    def add_build_target(
-        self, build_target: BuildTargetConfiguration
-    ) -> BuildTargetResult:
+    def add_build_target(self, build_target: BuildTargetConfiguration) ->

BuildTargetResult:
build_target_result = BuildTargetResult(build_target) self._inner_results.append(build_target_result) return build_target_result

dts/framework/test_suite.py +1 -3
index 3b890c0451..46d3de4944 100644
@@ -102,9 +102,7 @@ def _process_links(self) -> None:
                     tg_port.peer,
                     tg_port.identifier,
                 ):
-                    self._port_links.append(
-                        PortLink(sut_port=sut_port, tg_port=tg_port)
-                    )
+                    self._port_links.append(PortLink(sut_port=sut_port,
 tg_port=tg_port))
 
     def set_up_suite(self) -> None:
         """
dts/framework/test_suite.py +0 -0
@@ -151,9 +149,7 @@ def configure_testbed_ipv4(self, restore: bool =

False) -> None:

     def _configure_ipv4_forwarding(self, enable: bool) -> None:
         self.sut_node.configure_ipv4_forwarding(enable)
dts/framework/test_suite.py +1 -3
-    def send_packet_and_capture(
-        self, packet: Packet, duration: float = 1
-    ) -> list[Packet]:
+    def send_packet_and_capture(self, packet: Packet, duration: float =

1) -> list[Packet]:
"""
Send a packet through the appropriate interface and receive on the appropriate interface.

dts/framework/test_suite.py +0 -0
@@ -202,21 +198,15 @@ def verify(self, condition: bool,

failure_description: str) -> None:

             self._fail_test_case_verify(failure_description)

     def _fail_test_case_verify(self, failure_description: str) -> None:
dts/framework/test_suite.py +0 -2
-        self._logger.debug(
-            "A test case failed, showing the last 10 commands executed on

SUT:"

dts/framework/test_suite.py +1 -1
-        )
+        self._logger.debug("A test case failed, showing the last 10

commands executed on SUT:")
for command_res in
self.sut_node.main_session.remote_session.history[-10:]:
self._logger.debug(command_res.command)

dts/framework/test_suite.py +0 -2
-        self._logger.debug(
-            "A test case failed, showing the last 10 commands executed on

TG:"

dts/framework/test_suite.py +1 -1
-        )
+        self._logger.debug("A test case failed, showing the last 10

commands executed on TG:")
for command_res in
self.tg_node.main_session.remote_session.history[-10:]:
self._logger.debug(command_res.command)
raise TestCaseVerifyError(failure_description)

dts/framework/test_suite.py +1 -3
-    def verify_packets(
-        self, expected_packet: Packet, received_packets: list[Packet]
-    ) -> None:
+    def verify_packets(self, expected_packet: Packet, received_packets:

list[Packet]) -> None:
for received_packet in received_packets:
if self._compare_packets(expected_packet, received_packet):
break

dts/framework/test_suite.py +0 -0
@@ -225,17 +215,11 @@ def verify_packets(
                 f"The expected packet

{get_packet_summaries(expected_packet)} "
f"not found among received
{get_packet_summaries(received_packets)}"

             )
dts/framework/test_suite.py +1 -3
-            self._fail_test_case_verify(
-                "An expected packet not found among received packets."
-            )
+            self._fail_test_case_verify("An expected packet not found

among received packets.")

dts/framework/test_suite.py +1 -3
-    def _compare_packets(
-        self, expected_packet: Packet, received_packet: Packet
-    ) -> bool:
+    def _compare_packets(self, expected_packet: Packet, received_packet:

Packet) -> bool:

         self._logger.debug(
dts/framework/test_suite.py +1 -3
-            "Comparing packets: \n"
-            f"{expected_packet.summary()}\n"
-            f"{received_packet.summary()}"
+            "Comparing packets: \n" f"{expected_packet.summary()}\n"
Quoted 2 lines

f"{received_packet.summary()}"

Same situation as above where you would want to make sure to put the f at the start.

Quoted 278 lines

)

l3 = IP in expected_packet.layers()

dts/framework/test_suite.py +1 -5
@@ -262,14 +246,10 @@ def _compare_packets(
             expected_payload = expected_payload.payload
 
         if expected_payload:
-            self._logger.debug(
-                f"The expected packet did not contain {expected_payload}."
-            )
+            self._logger.debug(f"The expected packet did not contain
 {expected_payload}.")
             return False
         if received_payload and received_payload.__class__ != Padding:
-            self._logger.debug(
-                "The received payload had extra layers which were not

padding."

dts/framework/test_suite.py +1 -1
-            )
+            self._logger.debug("The received payload had extra layers

which were not padding.")
return False
return True

dts/framework/test_suite.py +0 -0
@@ -296,10 +276,7 @@ def _verify_l2_frame(self, received_packet: Ether,

l3: bool) -> bool:

def _verify_l3_packet(self, received_packet: IP, expected_packet: IP)
-> bool:
self._logger.debug("Looking at the IP layer.")

dts/framework/test_suite.py +1 -4
-        if (
-            received_packet.src != expected_packet.src
-            or received_packet.dst != expected_packet.dst
-        ):
+        if received_packet.src != expected_packet.src or

received_packet.dst != expected_packet.dst:
return False
return True

dts/framework/test_suite.py +0 -0
@@ -373,9 +350,7 @@ def _get_test_cases(self, test_case_regex: str) ->

list[MethodType]:
if self._should_be_executed(test_case_name, test_case_regex):
filtered_test_cases.append(test_case)
cases_str = ", ".join((x.__name__ for x in filtered_test_cases))

dts/framework/test_suite.py +0 -2
-        self._logger.debug(
-            f"Found test cases '{cases_str}' in

{self.__class__.__name__}."

dts/framework/test_suite.py +1 -1
-        )
+        self._logger.debug(f"Found test cases '{cases_str}' in

{self.__class__.__name__}.")
return filtered_test_cases

def _should_be_executed(self, test_case_name: str, test_case_regex:
str) -> bool:

dts/framework/test_suite.py +0 -2
@@ -445,9 +420,7 @@ def _execute_test_case(
             self._logger.exception(f"Test case execution ERROR:
 {test_case_name}")
             test_case_result.update(Result.ERROR, e)
         except KeyboardInterrupt:
-            self._logger.error(
-                f"Test case execution INTERRUPTED by user:

{test_case_name}"

dts/framework/test_suite.py +1 -1
-            )
+            self._logger.error(f"Test case execution INTERRUPTED by user:

{test_case_name}")
test_case_result.update(Result.SKIP)
raise KeyboardInterrupt("Stop DTS")

dts/framework/test_suite.py +1 -3
@@ -464,9 +437,7 @@ def is_test_suite(object) -> bool:
     try:
         testcase_module = importlib.import_module(testsuite_module_path)
     except ModuleNotFoundError as e:
-        raise ConfigurationError(
-            f"Test suite '{testsuite_module_path}' not found."
-        ) from e
+        raise ConfigurationError(f"Test suite '{testsuite_module_path}'

not found.") from e
return [
test_suite_class
for _, test_suite_class in inspect.getmembers(testcase_module,
is_test_suite)

dts/framework/testbed_model/capturing_traffic_generator.py +1 -3
index ab98987f8e..48d019ab21 100644
@@ -110,9 +110,7 @@ def send_packets_and_capture(
             duration,
         )
 
-        self._logger.debug(
-            f"Received packets: {get_packet_summaries(received_packets)}"
-        )
+        self._logger.debug(f"Received packets:
 {get_packet_summaries(received_packets)}")
         self._write_capture_from_packets(capture_name, received_packets)
         return received_packets
dts/framework/testbed_model/hw/cpu.py +0 -0
index d1918a12dc..cbc5fe7fff 100644
@@ -54,9 +54,7 @@ def __init__(self, lcore_list: list[int] | list[str] |

list[LogicalCore] | str):

         # the input lcores may not be sorted
         self._lcore_list.sort()
dts/framework/testbed_model/hw/cpu.py +0 -2
-        self._lcore_str = (
-

f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'

dts/framework/testbed_model/hw/cpu.py +1 -1
-        )
+        self._lcore_str =

f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'

     @property
     def lcore_list(self) -> list[int]:
dts/framework/testbed_model/hw/cpu.py +0 -0
@@ -70,15 +68,11 @@ def _get_consecutive_lcores_range(self,

lcore_ids_list: list[int]) -> list[str]:

                 segment.append(lcore_id)
             else:
                 formatted_core_list.append(
dts/framework/testbed_model/hw/cpu.py +1 -3
-                    f"{segment[0]}-{segment[-1]}"
-                    if len(segment) > 1
-                    else f"{segment[0]}"
+                    f"{segment[0]}-{segment[-1]}" if len(segment) > 1

else f"{segment[0]}"

                 )
                 current_core_index = lcore_ids_list.index(lcore_id)
                 formatted_core_list.extend(
dts/framework/testbed_model/hw/cpu.py +1 -3
-                    self._get_consecutive_lcores_range(
-                        lcore_ids_list[current_core_index:]
-                    )
+

self._get_consecutive_lcores_range(lcore_ids_list[current_core_index:])

                 )
                 segment.clear()
                 break
dts/framework/testbed_model/hw/cpu.py +1 -3
@@ -125,9 +119,7 @@ def __init__(
         self._filter_specifier = filter_specifier
 
         # sorting by core is needed in case hyperthreading is enabled
-        self._lcores_to_filter = sorted(
-            lcore_list, key=lambda x: x.core, reverse=not ascending
-        )
+        self._lcores_to_filter = sorted(lcore_list, key=lambda x: x.core,
 reverse=not ascending)
         self.filter()
 

@abstractmethod

dts/framework/testbed_model/hw/cpu.py +1 -3
@@ -220,9 +212,7 @@ def _filter_cores_from_socket(
                 else:
                     # we have enough lcores per this core
                     continue
-            elif self._filter_specifier.cores_per_socket > len(
-                lcore_count_per_core_map
-            ):
+            elif self._filter_specifier.cores_per_socket >

len(lcore_count_per_core_map):

                 # only add cores if we need more
                 lcore_count_per_core_map[lcore.core] = 1
                 filtered_lcores.append(lcore)
dts/framework/testbed_model/node.py +0 -0
index fc01e0bf8e..ef700d8114 100644
@@ -103,18 +103,14 @@ def _tear_down_execution(self) -> None:
         is not decorated so that the derived class doesn't have to use

the decorator.

         """
dts/framework/testbed_model/node.py +1 -3
-    def set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def set_up_build_target(self, build_target_config:

BuildTargetConfiguration) -> None:
"""
Perform the build target setup that will be done for each build
target
tested on this node.
"""
self._set_up_build_target(build_target_config)

dts/framework/testbed_model/node.py +1 -3
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config:

BuildTargetConfiguration) -> None:
"""
This method exists to be optionally overwritten by derived
classes and
is not decorated so that the derived class doesn't have to use
the decorator.

dts/framework/testbed_model/scapy.py +0 -0
index af0d4dbb25..7948424951 100644
@@ -96,9 +96,7 @@ def scapy_send_packets_and_capture(
     return [scapy_packet.build() for scapy_packet in

sniffer.stop(join=True)]

dts/framework/testbed_model/scapy.py +1 -3
-def scapy_send_packets(
-    xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str
-) -> None:
+def scapy_send_packets(xmlrpc_packets: list[xmlrpc.client.Binary],

send_iface: str) -> None:
"""RPC function to send packets.

The function is meant to be executed on the remote TG node.

dts/framework/testbed_model/scapy.py +0 -0
@@ -197,9 +195,7 @@ class ScapyTrafficGenerator(CapturingTrafficGenerator):
     def __init__(self, tg_node: TGNode, config:

ScapyTrafficGeneratorConfig):
self._config = config
self._tg_node = tg_node

dts/framework/testbed_model/scapy.py +1 -3
-        self._logger = getLogger(
-            f"{self._tg_node.name} {self._config.traffic_generator_type}"
-        )
+        self._logger = getLogger(f"{self._tg_node.name}

{self._config.traffic_generator_type}")

         assert (
             self._tg_node.config.os == OS.linux
dts/framework/testbed_model/scapy.py +0 -0
@@ -218,9 +214,7 @@ def __init__(self, tg_node: TGNode, config:

ScapyTrafficGeneratorConfig):

self._start_xmlrpc_server_in_remote_python(xmlrpc_server_listen_port)

         # connect to the server
dts/framework/testbed_model/scapy.py +0 -2
-        server_url = (
-            f"http://

{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"

dts/framework/testbed_model/scapy.py +1 -1
-        )
+        server_url = f"http://

{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"

         self.rpc_server_proxy = xmlrpc.client.ServerProxy(
             server_url, allow_none=True, verbose=SETTINGS.verbose
         )
dts/framework/testbed_model/scapy.py +0 -0
@@ -240,9 +234,7 @@ def _start_xmlrpc_server_in_remote_python(self,

listen_port: int):
src = inspect.getsource(QuittableXMLRPCServer)
# Lines with only whitespace break the repl if in the middle of a
function

         # or class, so strip all lines containing only whitespace
dts/framework/testbed_model/scapy.py +0 -2
-        src = "\n".join(
-            [line for line in src.splitlines() if not line.isspace() and

line != ""]

dts/framework/testbed_model/scapy.py +1 -1
-        )
+        src = "\n".join([line for line in src.splitlines() if not

line.isspace() and line != ""])

         spacing = "\n" * 4
dts/framework/testbed_model/sut_node.py +1 -3
index 202aebfd06..dfd8c755b4 100644
@@ -129,9 +129,7 @@ def remote_dpdk_build_dir(self) -> PurePath:
     @property
     def dpdk_version(self) -> str:
         if self._dpdk_version is None:
-            self._dpdk_version = self.main_session.get_dpdk_version(
-                self._remote_dpdk_dir
-            )
+            self._dpdk_version =
 self.main_session.get_dpdk_version(self._remote_dpdk_dir)
         return self._dpdk_version
 

@property

dts/framework/testbed_model/sut_node.py +1 -2
@@ -149,8 +147,7 @@ def compiler_version(self) -> str:
                 )
             else:
                 self._logger.warning(
-                    "Failed to get compiler version because"
-                    "_build_target_config is None."
+                    "Failed to get compiler version because"
Quoted 2 lines

"_build_target_config is None."

Double string here.

Quoted 42 lines
                 )
                 return ""
         return self._compiler_version
dts/framework/testbed_model/sut_node.py +1 -3
@@ -163,9 +160,7 @@ def get_build_target_info(self) -> BuildTargetInfo:
     def _guess_dpdk_remote_dir(self) -> PurePath:
         return
 self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config:

BuildTargetConfiguration) -> None:

         """
         Setup DPDK on the SUT node.
         """
dts/framework/testbed_model/sut_node.py +1 -3
@@ -177,22 +172,17 @@ def _set_up_build_target(
         self._copy_dpdk_tarball()
         self._build_dpdk()
 
-    def _configure_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _configure_build_target(self, build_target_config:

BuildTargetConfiguration) -> None:

         """
         Populate common environment variables and set build target config.
         """
         self._env_vars = {}
         self._build_target_config = build_target_config
dts/framework/testbed_model/sut_node.py +0 -2
-        self._env_vars.update(
-

self.main_session.get_dpdk_build_env_vars(build_target_config.arch)

dts/framework/testbed_model/sut_node.py +1 -1
-        )
+

self._env_vars.update(self.main_session.get_dpdk_build_env_vars(build_target_config.arch))
self._env_vars["CC"] = build_target_config.compiler.name
if build_target_config.compiler_wrapper:
self._env_vars["CC"] = (

dts/framework/testbed_model/sut_node.py +1 -2
-                f"'{build_target_config.compiler_wrapper} "
-                f"{build_target_config.compiler.name}'"
+                f"'{build_target_config.compiler_wrapper} " f"{
Quoted 2 lines

build_target_config.compiler.name}'"

Double string here.

Quoted 75 lines
             )

     @Node.skip_setup
dts/framework/testbed_model/sut_node.py +1 -3
@@ -224,9 +214,7 @@ def _copy_dpdk_tarball(self) -> None:
         self.main_session.remove_remote_dir(self._remote_dpdk_dir)
 
         # then extract to remote path
-        self.main_session.extract_remote_tarball(
-            remote_tarball_path, self._remote_dpdk_dir
-        )
+        self.main_session.extract_remote_tarball(remote_tarball_path,
 self._remote_dpdk_dir)
 
     @Node.skip_setup
     def _build_dpdk(self) -> None:
dts/framework/testbed_model/sut_node.py +1 -3
@@ -263,9 +251,7 @@ def build_dpdk_app(self, app_name: str,
 **meson_dpdk_args: str | bool) -> PurePa
         )
 
         if app_name == "all":
-            return self.main_session.join_remote_path(
-                self.remote_dpdk_build_dir, "examples"
-            )
+            return
 self.main_session.join_remote_path(self.remote_dpdk_build_dir, "examples")
         return self.main_session.join_remote_path(

self.remote_dpdk_build_dir, "examples", f"dpdk-{app_name}"
)

dts/framework/testbed_model/sut_node.py +2 -7
@@ -319,9 +305,7 @@ def create_eal_parameters(
                 '-c 0xf -a 0000:88:00.0
--file-prefix=dpdk_1112_20190809143420';
         """
 
-        lcore_list = LogicalCoreList(
-            self.filter_lcores(lcore_filter_specifier, ascending_cores)
-        )
+        lcore_list =
 LogicalCoreList(self.filter_lcores(lcore_filter_specifier, ascending_cores))
 
         if append_prefix_timestamp:
             prefix = f"{prefix}_{self._dpdk_timestamp}"
@@ -386,6 +370,4 @@ def create_interactive_shell(
                 self.remote_dpdk_build_dir, shell_cls.path
             )
 
-        return super().create_interactive_shell(
-            shell_cls, timeout, privileged, str(eal_parameters)
-        )
+        return super().create_interactive_shell(shell_cls, timeout,

privileged, str(eal_parameters))

dts/framework/testbed_model/tg_node.py +1 -3
index 27025cfa31..dca4ec0849 100644
@@ -45,9 +45,7 @@ class TGNode(Node):
 
     def __init__(self, node_config: TGNodeConfiguration):
         super(TGNode, self).__init__(node_config)
-        self.traffic_generator = create_traffic_generator(
-            self, node_config.traffic_generator
-        )
+        self.traffic_generator = create_traffic_generator(self,
 node_config.traffic_generator)
         self._logger.info(f"Created node: {self.name}")
 
     def send_packet_and_capture(
dts/framework/testbed_model/tg_node.py +1 -2
@@ -94,6 +92,5 @@ def create_traffic_generator(
             return ScapyTrafficGenerator(tg_node,
 traffic_generator_config)
         case _:
             raise ConfigurationError(
-                "Unknown traffic generator: "
-                f"{traffic_generator_config.traffic_generator_type}"
+                "Unknown traffic generator: "
Quoted 2 lines

f"{traffic_generator_config.traffic_generator_type}"

Double string but one that needs the whole thing to be an f-string.

Quoted 130 lines
             )
dts/framework/utils.py +1 -3
index d27c2c5b5f..d098d364ff 100644
@@ -19,9 +19,7 @@
 
 class StrEnum(Enum):
     @staticmethod
-    def _generate_next_value_(
-        name: str, start: int, count: int, last_values: object
-    ) -> str:
+    def _generate_next_value_(name: str, start: int, count: int,

last_values: object) -> str:

         return name

     def __str__(self) -> str:
dts/framework/utils.py +1 -3
@@ -32,9 +30,7 @@ def __str__(self) -> str:
 
 
 def check_dts_python_version() -> None:
-    if sys.version_info.major < 3 or (
-        sys.version_info.major == 3 and sys.version_info.minor < 10
-    ):
+    if sys.version_info.major < 3 or (sys.version_info.major == 3 and

sys.version_info.minor < 10):

         print(
             RED(
                 (
dts/framework/utils.py +1 -3
@@ -60,9 +56,7 @@ def expand_range(range_str: str) -> list[int]:
         range_boundaries = range_str.split("-")
         # will throw an exception when items in range_boundaries can't be
 converted,
         # serving as type check
-        expanded_range.extend(
-            range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1)
-        )
+        expanded_range.extend(range(int(range_boundaries[0]),
 int(range_boundaries[-1]) + 1))
 

return expanded_range

dts/framework/utils.py +1 -3
@@ -71,9 +65,7 @@ def get_packet_summaries(packets: list[Packet]):
     if len(packets) == 1:
         packet_summaries = packets[0].summary()
     else:
-        packet_summaries = json.dumps(
-            list(map(lambda pkt: pkt.summary(), packets)), indent=4
-        )
+        packet_summaries = json.dumps(list(map(lambda pkt: pkt.summary(),
 packets)), indent=4)
     return f"Packet contents: \n{packet_summaries}"
 
@@ -94,9 +86,7 @@ class MesonArgs(object):
     _default_library: str
 
     def __init__(self, default_library: str | None = None, **dpdk_args:

str | bool):

dts/framework/utils.py +0 -2
-        self._default_library = (
-            f"--default-library={default_library}" if default_library

else ""

dts/framework/utils.py +1 -1
-        )
+        self._default_library = f"--default-library={default_library}" if

default_library else ""

         self._dpdk_args = " ".join(
             (
                 f"-D{dpdk_arg_name}={dpdk_arg_value}"
dts/pyproject.toml +0 -1
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
 [tool.pylama]
 linters = "mccabe,pycodestyle,pyflakes"
 format = "pylint"
-max_line_length = 88 #

https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length

dts/pyproject.toml +1 -1
+max_line_length = 100
 
 [tool.mypy]
 python_version = "3.10"
@@ -55,4 +55,4 @@ profile = "black"
 [tool.black]
 target-version = ['py310']
 include = '\.pyi?$'
-line-length = 88 #

https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length
<https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length+line-length>
= 100

dts/tests/TestSuite_hello_world.py +1 -3
index 7e3d95c0cf..768ba1cfa8 100644
@@ -34,9 +34,7 @@ def test_hello_world_single_core(self) -> None:
         # get the first usable core
         lcore_amount = LogicalCoreCount(1, 1, 1)
         lcores = LogicalCoreCountFilter(self.sut_node.lcores,
 lcore_amount).filter()
-        eal_para = self.sut_node.create_eal_parameters(
-            lcore_filter_specifier=lcore_amount
-        )
+        eal_para =
 self.sut_node.create_eal_parameters(lcore_filter_specifier=lcore_amount)
         result = self.sut_node.run_dpdk_app(self.app_helloworld_path,

eal_para)
self.verify(
f"hello from core {int(lcores[0])}" in result.stdout,

dts/tests/TestSuite_smoke_tests.py +0 -2
index 4a269df75b..36119e6469 100644
@@ -45,13 +45,10 @@ def test_driver_tests(self) -> None:
         for dev in self.sut_node.virtual_devices:
             vdev_args += f"--vdev {dev} "
         vdev_args = vdev_args[:-1]
-        driver_tests_command = (
-            f"meson test -C {self.dpdk_build_dir_path} --suite

driver-tests"

dts/tests/TestSuite_smoke_tests.py +2 -4
-        )
+        driver_tests_command = f"meson test -C {self.dpdk_build_dir_path}
--suite driver-tests"
         if vdev_args:
             self._logger.info(
-                "Running driver tests with the following virtual "
-                f"devices: {vdev_args}"
+                "Running driver tests with the following virtual "
Quoted 2 lines

f"devices: {vdev_args}"

Double string that should be an f-string.

Quoted 20 lines
             )
             driver_tests_command += f' --test-args "{vdev_args}"'
dts/tests/TestSuite_smoke_tests.py +0 -0
@@ -67,9 +64,7 @@ def test_devices_listed_in_testpmd(self) -> None:
         Test:
             Uses testpmd driver to verify that devices have been found by

testpmd.

         """
dts/tests/TestSuite_smoke_tests.py +1 -3
-        testpmd_driver = self.sut_node.create_interactive_shell(
-            TestPmdShell, privileged=True
-        )
+        testpmd_driver =

self.sut_node.create_interactive_shell(TestPmdShell, privileged=True)
dev_list = [str(x) for x in testpmd_driver.get_devices()] for nic in self.nics_in_node:
self.verify(
--
2.34.1

#15 lore raw

Re: [PATCH v2 2/2] dts: reformat to 100 line length

Thanks, Jeremy. I skimmed the changes before submitting them, but I didn't catch this. I'll submit a new version.

Quoted 1,334 lines · Jeremy Spewock

I think this is a good idea because of all the weird places we had to break things up with the 88 character cap. I do however also notice that in some cases where these multi-line strings were combined back into one line it would just have two string literals on the same line rather than them being just oen string. I tried to point out everywhere I found this behavoir below as it looks a little awkward in the code.

It looks good to me otherwise though.

Quoted 157 lines · Juraj Linkeš

Reformat to 100 from the previous 88 to unify with C recommendations.

---
 dts/framework/config/__init__.py              | 20 ++-----
 dts/framework/dts.py                          | 12 +---
 dts/framework/exception.py                    |  3 +-
 dts/framework/remote_session/__init__.py      |  4 +-
 dts/framework/remote_session/linux_session.py | 39 ++++---------
 dts/framework/remote_session/posix_session.py | 30 +++-------
 .../remote/interactive_remote_session.py      |  7 +--
 .../remote/interactive_shell.py               |  4 +-
 .../remote_session/remote/remote_session.py   |  8 +--
 .../remote_session/remote/ssh_session.py      | 16 ++----
 .../remote_session/remote/testpmd_shell.py    |  8 +--
 dts/framework/settings.py                     |  4 +-
 dts/framework/test_result.py                  | 16 ++----
 dts/framework/test_suite.py                   | 57 +++++--------------
 .../capturing_traffic_generator.py            |  4 +-
 dts/framework/testbed_model/hw/cpu.py         | 20 ++-----
 dts/framework/testbed_model/node.py           |  8 +--
 dts/framework/testbed_model/scapy.py          | 16 ++----
 dts/framework/testbed_model/sut_node.py       | 38 ++++---------
 dts/framework/testbed_model/tg_node.py        |  7 +--
 dts/framework/utils.py                        | 20 ++-----
 dts/pyproject.toml                            |  4 +-
 dts/tests/TestSuite_hello_world.py            |  4 +-
 dts/tests/TestSuite_smoke_tests.py            | 11 +---
 24 files changed, 93 insertions(+), 267 deletions(-)
dts/framework/config/__init__.py +0 -0
index cb7e00ba34..9b32cf0532 100644
@@ -140,9 +140,7 @@ def from_dict(d: dict) ->

Union["SutNodeConfiguration", "TGNodeConfiguration"]:

if "traffic_generator" in d:
return TGNodeConfiguration(

dts/framework/config/__init__.py +1 -3
-                traffic_generator=TrafficGeneratorConfig.from_dict(
-                    d["traffic_generator"]
-                ),
+

traffic_generator=TrafficGeneratorConfig.from_dict(d["traffic_generator"]),

                 **common_config,
             )
         else:
dts/framework/config/__init__.py +1 -3
@@ -249,9 +247,7 @@ def from_dict(
         build_targets: list[BuildTargetConfiguration] = list(
             map(BuildTargetConfiguration.from_dict, d["build_targets"])
         )
-        test_suites: list[TestSuiteConfig] = list(
-            map(TestSuiteConfig.from_dict, d["test_suites"])
-        )
+        test_suites: list[TestSuiteConfig] =
 list(map(TestSuiteConfig.from_dict, d["test_suites"]))
         sut_name = d["system_under_test_node"]["node_name"]
         skip_smoke_tests = d.get("skip_smoke_tests", False)

assert sut_name in node_map, f"Unknown SUT {sut_name} in
execution {d}"

dts/framework/config/__init__.py +1 -3
@@ -268,9 +264,7 @@ def from_dict(
         ), f"Invalid TG configuration {traffic_generator_node}"
 
         vdevs = (
-            d["system_under_test_node"]["vdevs"]
-            if "vdevs" in d["system_under_test_node"]
-            else []
+            d["system_under_test_node"]["vdevs"] if "vdevs" in

d["system_under_test_node"] else []

         )
         return ExecutionConfiguration(
             build_targets=build_targets,
dts/framework/config/__init__.py +0 -0
@@ -299,9 +293,7 @@ def from_dict(d: dict) -> "Configuration":
         assert len(nodes) == len(node_map), "Duplicate node names are

not allowed"

         executions: list[ExecutionConfiguration] = list(
dts/framework/config/__init__.py +0 -2
-            map(
-                ExecutionConfiguration.from_dict, d["executions"],

[node_map for _ in d]

dts/framework/config/__init__.py +1 -1
-            )
+            map(ExecutionConfiguration.from_dict, d["executions"],

[node_map for _ in d])

         )

         return Configuration(executions=executions)
dts/framework/config/__init__.py +1 -3
@@ -315,9 +307,7 @@ def load_config() -> Configuration:
     with open(SETTINGS.config_file_path, "r") as f:
         config_data = yaml.safe_load(f)
 
-    schema_path = os.path.join(
-        pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json"
-    )
+    schema_path = os.path.join(pathlib.Path(__file__).parent.resolve(),
 "conf_yaml_schema.json")
 
     with open(schema_path, "r") as f:

schema = json.load(f)

dts/framework/dts.py +0 -0
index f773f0c38d..e2aada5a23 100644
@@ -92,9 +92,7 @@ def _run_execution(
     Run the given execution. This involves running the execution setup

as well as
running all build targets in the given execution. """

dts/framework/dts.py +0 -2
-    dts_logger.info(
-        f"Running execution with SUT '{

execution.system_under_test_node.name}'."

dts/framework/dts.py +1 -1
-    )
+    dts_logger.info(f"Running execution with SUT '{

execution.system_under_test_node.name}'.")
execution_result = result.add_execution(sut_node.config) execution_result.add_sut_info(sut_node.node_info)

dts/framework/dts.py +0 -2
@@ -107,9 +105,7 @@ def _run_execution(
 
     else:
         for build_target in execution.build_targets:
-            _run_build_target(
-                sut_node, tg_node, build_target, execution,

execution_result

dts/framework/dts.py +1 -1
-            )
+            _run_build_target(sut_node, tg_node, build_target,

execution, execution_result)

finally:
try:

dts/framework/dts.py +0 -0
@@ -170,9 +166,7 @@ def _run_all_suites(
         execution.test_suites[:0] =

[TestSuiteConfig.from_dict("smoke_tests")]
for test_suite_config in execution.test_suites:
try:

dts/framework/dts.py +0 -2
-            _run_single_suite(
-                sut_node, tg_node, execution, build_target_result,

test_suite_config

dts/framework/dts.py +1 -1
-            )
+            _run_single_suite(sut_node, tg_node, execution,

build_target_result, test_suite_config)
except BlockingTestSuiteError as e:
dts_logger.exception(
f"An error occurred within
{test_suite_config.test_suite}. "

dts/framework/exception.py +0 -0
index 001a5a5496..59cf9fd12a 100644
@@ -117,8 +117,7 @@ def __init__(self, command: str, command_return_code:

int):

     def __str__(self) -> str:
         return (
dts/framework/exception.py +1 -2
-            f"Command {self.command} returned a non-zero exit code: "
-            f"{self.command_return_code}"
+            f"Command {self.command} returned a non-zero exit code: "
Quoted 2 lines

f"{self.command_return_code}"

If you modify this to be on the same line you actually don't need the separate string on this line. The line could instead be the following:

f"Command {self.command} returned a non-zero exit code:
{self.command_return_code}"

Quoted 114 lines
         )
dts/framework/remote_session/__init__.py +1 -3
index 00b6d1f03a..6124417bd7 100644
@@ -30,9 +30,7 @@
 )
 
 
-def create_session(
-    node_config: NodeConfiguration, name: str, logger: DTSLOG
-) -> OSSession:
+def create_session(node_config: NodeConfiguration, name: str, logger:

DTSLOG) -> OSSession:
match node_config.os:
case OS.linux:
return LinuxSession(node_config, name, logger)

dts/framework/remote_session/linux_session.py +0 -0
index a3f1a6bf3b..aa76e25436 100644
@@ -82,9 +82,7 @@ def setup_hugepages(self, hugepage_amount: int,

force_first_numa: bool) -> None:

         self._mount_huge_pages()

     def _get_hugepage_size(self) -> int:
dts/framework/remote_session/linux_session.py +1 -3
-        hugepage_size = self.send_command(
-            "awk '/Hugepagesize/ {print $2}' /proc/meminfo"
-        ).stdout
+        hugepage_size = self.send_command("awk '/Hugepagesize/ {print

$2}' /proc/meminfo").stdout

         return int(hugepage_size)

     def _get_hugepages_total(self) -> int:
dts/framework/remote_session/linux_session.py +1 -3
@@ -120,13 +118,9 @@ def _supports_numa(self) -> bool:
         # there's no reason to do any numa specific configuration)
         return len(self._numa_nodes) > 1
 
-    def _configure_huge_pages(
-        self, amount: int, size: int, force_first_numa: bool
-    ) -> None:
+    def _configure_huge_pages(self, amount: int, size: int,

force_first_numa: bool) -> None:
self._logger.info("Configuring Hugepages.")

dts/framework/remote_session/linux_session.py +1 -3
-        hugepage_config_path = (
-            f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
-        )
+        hugepage_config_path =

f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
if force_first_numa and self._supports_numa():
# clear non-numa hugepages self.send_command(f"echo 0 | tee {hugepage_config_path}",
privileged=True)

dts/framework/remote_session/linux_session.py +0 -2
@@ -135,24 +129,18 @@ def _configure_huge_pages(
                 f"/hugepages-{size}kB/nr_hugepages"
             )
 
-        self.send_command(
-            f"echo {amount} | tee {hugepage_config_path}",

privileged=True

dts/framework/remote_session/linux_session.py +1 -1
-        )
+        self.send_command(f"echo {amount} | tee {hugepage_config_path}",

privileged=True)

def update_ports(self, ports: list[Port]) -> None:
self._logger.debug("Gathering port info.") for port in ports:

dts/framework/remote_session/linux_session.py +1 -3
-            assert (
-                port.node == self.name
-            ), "Attempted to gather port info on the wrong node"
+            assert port.node == self.name, "Attempted to gather port

info on the wrong node"

port_info_list = self._get_lshw_info()
for port in ports:
for port_info in port_info_list:
if f"pci@{port.pci}" == port_info.get("businfo"):

dts/framework/remote_session/linux_session.py +0 -2
-                    self._update_port_attr(
-                        port, port_info.get("logicalname"),

"logical_name"

dts/framework/remote_session/linux_session.py +1 -1
-                    )
+                    self._update_port_attr(port,

port_info.get("logicalname"), "logical_name")
self._update_port_attr(port,
port_info.get("serial"), "mac_address")
port_info_list.remove(port_info) break

dts/framework/remote_session/linux_session.py +1 -3
@@ -163,25 +151,18 @@ def _get_lshw_info(self) -> list[LshwOutput]:
         output = self.send_command("lshw -quiet -json -C network",
 verify=True)
         return json.loads(output.stdout)
 
-    def _update_port_attr(
-        self, port: Port, attr_value: str | None, attr_name: str
-    ) -> None:
+    def _update_port_attr(self, port: Port, attr_value: str | None,

attr_name: str) -> None:
if attr_value:
setattr(port, attr_name, attr_value)

dts/framework/remote_session/linux_session.py +0 -2
-            self._logger.debug(
-                f"Found '{attr_name}' of port {port.pci}:

'{attr_value}'."

dts/framework/remote_session/linux_session.py +1 -1
-            )
+            self._logger.debug(f"Found '{attr_name}' of port {port.pci}:

'{attr_value}'.")

         else:
             self._logger.warning(
dts/framework/remote_session/linux_session.py +1 -2
-                f"Attempted to get '{attr_name}' of port {port.pci}, "
-                f"but it doesn't exist."
+                f"Attempted to get '{attr_name}' of port {port.pci}, "
Quoted 2 lines

f"but it doesn't exist."

This is another case where the two different strings aren't needed

Quoted 19 lines
             )

     def configure_port_state(self, port: Port, enable: bool) -> None:
         state = "up" if enable else "down"
dts/framework/remote_session/linux_session.py +0 -2
-        self.send_command(
-            f"ip link set dev {port.logical_name} {state}",

privileged=True

dts/framework/remote_session/linux_session.py +1 -1
-        )
+        self.send_command(f"ip link set dev {port.logical_name}

{state}", privileged=True)

     def configure_port_ip_address(
         self,
dts/framework/remote_session/posix_session.py +0 -0
index 5da0516e05..eb59252dd1 100644

dts/framework/remote_session/posix_session.py def extract_remote_tarball( · line 99

Quoted 8 lines
dts/framework/remote_session/posix_session.py +1 -2
@@ -94,8 +94,7 @@ def extract_remote_tarball(
         expected_dir: str | PurePath | None = None,
     ) -> None:
         self.send_command(
-            f"tar xfm {remote_tarball_path} "
-            f"-C {PurePosixPath(remote_tarball_path).parent}",
+            f"tar xfm {remote_tarball_path} " f"-C
 {PurePosixPath(remote_tarball_path).parent}",
 

Double string here as well.

Quoted 5 lines
dts/framework/remote_session/posix_session.py +0 -0
             60,
         )
         if expected_dir:

dts/framework/remote_session/posix_session.py def build_dpdk( · line 130

Quoted 9 lines
dts/framework/remote_session/posix_session.py +1 -2
@@ -125,8 +124,7 @@ def build_dpdk(
                 self._logger.info("Configuring DPDK build from
 scratch.")
                 self.remove_remote_dir(remote_dpdk_build_dir)
                 self.send_command(
-                    f"meson setup "
-                    f"{meson_args} {remote_dpdk_dir}
 {remote_dpdk_build_dir}",
+                    f"meson setup " f"{meson_args} {remote_dpdk_dir}
 {remote_dpdk_build_dir}",

Double string.

Quoted 110 lines

timeout,
verify=True,
env=env_vars,

dts/framework/remote_session/posix_session.py +0 -2
@@ -140,9 +138,7 @@ def build_dpdk(
             raise DPDKBuildError(f"DPDK build failed when doing
 '{e.command}'.")
 
     def get_dpdk_version(self, build_dir: str | PurePath) -> str:
-        out = self.send_command(
-            f"cat {self.join_remote_path(build_dir, 'VERSION')}",

verify=True

dts/framework/remote_session/posix_session.py +1 -1
-        )
+        out = self.send_command(f"cat {self.join_remote_path(build_dir,

'VERSION')}", verify=True)

         return out.stdout

     def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) ->

None:

dts/framework/remote_session/posix_session.py +0 -0
@@ -156,9 +152,7 @@ def kill_cleanup_dpdk_apps(self, dpdk_prefix_list:

Iterable[str]) -> None:
self._check_dpdk_hugepages(dpdk_runtime_dirs) self._remove_dpdk_runtime_dirs(dpdk_runtime_dirs)

dts/framework/remote_session/posix_session.py +1 -3
-    def _get_dpdk_runtime_dirs(
-        self, dpdk_prefix_list: Iterable[str]
-    ) -> list[PurePosixPath]:
+    def _get_dpdk_runtime_dirs(self, dpdk_prefix_list: Iterable[str]) ->

list[PurePosixPath]:
prefix = PurePosixPath("/var", "run", "dpdk") if not dpdk_prefix_list:
remote_prefixes = self._list_remote_dirs(prefix)

dts/framework/remote_session/posix_session.py +0 -0
@@ -174,9 +168,7 @@ def _list_remote_dirs(self, remote_path: str |

PurePath) -> list[str] | None:
Return a list of directories of the remote_dir. If remote_path doesn't exist, return None. """

dts/framework/remote_session/posix_session.py +1 -3
-        out = self.send_command(
-            f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'"
-        ).stdout
+        out = self.send_command(f"ls -l {remote_path} | awk '/^d/

{{print $NF}}'").stdout
if "No such file or directory" in out:
return None
else:

dts/framework/remote_session/posix_session.py +1 -4
@@ -200,9 +192,7 @@ def _remote_files_exists(self, remote_path: PurePath)
-> bool:
         result = self.send_command(f"test -e {remote_path}")
         return not result.return_code
 
-    def _check_dpdk_hugepages(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _check_dpdk_hugepages(self, dpdk_runtime_dirs: Iterable[str |

PurePath]) -> None:
for dpdk_runtime_dir in dpdk_runtime_dirs:
hugepage_info = PurePosixPath(dpdk_runtime_dir,
"hugepage_info")
if self._remote_files_exists(hugepage_info):

dts/framework/remote_session/posix_session.py +1 -3
@@ -213,9 +203,7 @@ def _check_dpdk_hugepages(
                     self._logger.warning(out)
 
 self._logger.warning("*******************************************")
 
-    def _remove_dpdk_runtime_dirs(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _remove_dpdk_runtime_dirs(self, dpdk_runtime_dirs: Iterable[str

| PurePath]) -> None:
for dpdk_runtime_dir in dpdk_runtime_dirs:
self.remove_remote_dir(dpdk_runtime_dir)

dts/framework/remote_session/posix_session.py +0 -0
@@ -245,6 +233,4 @@ def get_node_info(self) -> NodeInfo:
             SETTINGS.timeout,
         ).stdout.split("\n")
         kernel_version = self.send_command("uname -r",

SETTINGS.timeout).stdout

dts/framework/remote_session/posix_session.py +0 -2
-        return NodeInfo(
-            os_release_info[0].strip(), os_release_info[1].strip(),

kernel_version

dts/framework/remote_session/posix_session.py +1 -1
-        )
+        return NodeInfo(os_release_info[0].strip(),

os_release_info[1].strip(), kernel_version)
diff --git a/dts/framework/remote_session/remote/interactive_remote_session.py b/dts/framework/remote_session/remote/interactive_remote_session.py index 9085a668e8..42c99b2525 100644

dts/framework/remote_session/remote/interactive_remote_session.py +0 -0
@@ -73,9 +73,7 @@ def __init__(self, node_config: NodeConfiguration,

_logger: DTSLOG) -> None:
f"Initializing interactive connection for {self.username}@
{self.hostname}"

         )
         self._connect()
dts/framework/remote_session/remote/interactive_remote_session.py +0 -2
-        self._logger.info(
-            f"Interactive connection successful for {self.username}@

{self.hostname}"

dts/framework/remote_session/remote/interactive_remote_session.py +1 -1
-        )
+        self._logger.info(f"Interactive connection successful for

{self.username}@{self.hostname}")

def _connect(self) -> None:
"""Establish a connection to the node.

dts/framework/remote_session/remote/interactive_remote_session.py +1 -2
@@ -108,8 +106,7 @@ def _connect(self) -> None:
                 self._logger.debug(traceback.format_exc())
                 self._logger.warning(e)
                 self._logger.info(
-                    "Retrying interactive session connection: "
-                    f"retry number {retry_attempt +1}"
+                    "Retrying interactive session connection: " f"retry
Quoted 2 lines

number {retry_attempt +1}"

Here you can get rid of the double string, but you would have to make sure to add the f to the start to make the whole thing and f-string.

Quoted 285 lines
                 )
             else:
                 break
dts/framework/remote_session/remote/interactive_shell.py +1 -3
index c24376b2a8..4db19fb9b3 100644
@@ -85,9 +85,7 @@ def __init__(
         self._app_args = app_args
         self._start_application(get_privileged_command)
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str],

str] | None) -> None:
"""Starts a new interactive application based on the path to the
app.

This method is often overridden by subclasses as their process
for

dts/framework/remote_session/remote/remote_session.py +1 -3
index 0647d93de4..719f7d1ef7 100644
@@ -96,9 +96,7 @@ def send_command(
         If verify is True, check the return code of the executed command
         and raise a RemoteCommandExecutionError if the command failed.
         """
-        self._logger.info(
-            f"Sending: '{command}'" + (f" with env vars: '{env}'" if env
 else "")
-        )
+        self._logger.info(f"Sending: '{command}'" + (f" with env vars:
 '{env}'" if env else ""))
         result = self._send_command(command, timeout, env)

if verify and result.return_code:
self._logger.debug(

dts/framework/remote_session/remote/remote_session.py +1 -3
@@ -112,9 +110,7 @@ def send_command(
         return result
 
     @abstractmethod
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict |

None) -> CommandResult:
"""
Use the underlying protocol to execute the command using
optional env vars
and return CommandResult.

dts/framework/remote_session/remote/ssh_session.py +0 -2
index 8d127f1601..1a7ee649ab 100644
@@ -80,9 +80,7 @@ def _connect(self) -> None:
                 if error not in errors:
                     errors.append(error)
 
-                self._logger.info(
-                    f"Retrying connection: retry number {retry_attempt +

1}."

dts/framework/remote_session/remote/ssh_session.py +1 -1
-                )
+                self._logger.info(f"Retrying connection: retry number

{retry_attempt + 1}.")

else:
break

dts/framework/remote_session/remote/ssh_session.py +1 -3
@@ -92,9 +90,7 @@ def _connect(self) -> None:
     def is_alive(self) -> bool:
         return self.session.is_connected
 
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict |

None) -> CommandResult:
"""Send a command and return the result of the execution.

Args:

dts/framework/remote_session/remote/ssh_session.py +1 -3
@@ -107,9 +103,7 @@ def _send_command(
             SSHTimeoutError: The command execution timed out.
         """
         try:
-            output = self.session.run(
-                command, env=env, warn=True, hide=True, timeout=timeout
-            )
+            output = self.session.run(command, env=env, warn=True,
 hide=True, timeout=timeout)
 
         except (UnexpectedExit, ThreadException) as e:

self._logger.exception(e)

dts/framework/remote_session/remote/ssh_session.py +0 -2
@@ -119,9 +113,7 @@ def _send_command(
             self._logger.exception(e)
             raise SSHTimeoutError(command, e.result.stderr) from e
 
-        return CommandResult(
-            self.name, command, output.stdout, output.stderr,

output.return_code

dts/framework/remote_session/remote/ssh_session.py +1 -1
-        )
+        return CommandResult(self.name, command, output.stdout,

output.stderr, output.return_code)

     def copy_from(
         self,
dts/framework/remote_session/remote/testpmd_shell.py +1 -3
index 1455b5a199..08ac311016 100644
@@ -21,13 +21,9 @@ class TestPmdShell(InteractiveShell):
     path: PurePath = PurePath("app", "dpdk-testpmd")
     dpdk_app: bool = True
     _default_prompt: str = "testpmd>"
-    _command_extra_chars: str = (
-        "\n"  # We want to append an extra newline to every command
-    )
+    _command_extra_chars: str = "\n"  # We want to append an extra

newline to every command

dts/framework/remote_session/remote/testpmd_shell.py +1 -3
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str],

str] | None) -> None:
"""See "_start_application" in InteractiveShell.""" self._app_args += " -- -i" super()._start_application(get_privileged_command)

dts/framework/settings.py +1 -3
index cfa39d011b..aad444e99c 100644
@@ -170,9 +170,7 @@ def _get_settings() -> _Settings:
         timeout=parsed_args.timeout,
         verbose=(parsed_args.verbose == "Y"),
         skip_setup=(parsed_args.skip_setup == "Y"),
-        dpdk_tarball_path=Path(
-            DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir)
-        )
+        dpdk_tarball_path=Path(DPDKGitTarball(parsed_args.tarball,
 parsed_args.output_dir))
         if not os.path.exists(parsed_args.tarball)
         else Path(parsed_args.tarball),

compile_timeout=parsed_args.compile_timeout,

dts/framework/test_result.py +1 -3
index f0fbe80f6f..4c2e7e2418 100644
@@ -83,9 +83,7 @@ def __iadd__(self, other: Result) -> "Statistics":
         """
         self[other.name] += 1
         self["PASS RATE"] = (
-            float(self[Result.PASS.name])
-            * 100
-            / sum(self[result.name] for result in Result)
+            float(self[Result.PASS.name]) * 100 / sum(self[result.name]
 for result in Result)
         )
         return self
@@ -135,9 +133,7 @@ def _get_setup_teardown_errors(self) ->

list[Exception]:

     def _get_inner_errors(self) -> list[Exception]:
         return [
dts/framework/test_result.py +1 -3
-            error
-            for inner_result in self._inner_results
-            for error in inner_result.get_errors()
+            error for inner_result in self._inner_results for error in

inner_result.get_errors()

         ]

     def get_errors(self) -> list[Exception]:
dts/framework/test_result.py +1 -3
@@ -174,9 +170,7 @@ def add_stats(self, statistics: Statistics) -> None:
         statistics += self.result
 
     def __bool__(self) -> bool:
-        return (
-            bool(self.setup_result) and bool(self.teardown_result) and
 bool(self.result)
-        )
+        return bool(self.setup_result) and bool(self.teardown_result)
 and bool(self.result)
 

class TestSuiteResult(BaseResult):

dts/framework/test_result.py +1 -4
@@ -247,9 +241,7 @@ def __init__(self, sut_node: NodeConfiguration):
         super(ExecutionResult, self).__init__()
         self.sut_node = sut_node
 
-    def add_build_target(
-        self, build_target: BuildTargetConfiguration
-    ) -> BuildTargetResult:
+    def add_build_target(self, build_target: BuildTargetConfiguration)
-> BuildTargetResult:
         build_target_result = BuildTargetResult(build_target)
         self._inner_results.append(build_target_result)
         return build_target_result
dts/framework/test_suite.py +1 -3
index 3b890c0451..46d3de4944 100644
@@ -102,9 +102,7 @@ def _process_links(self) -> None:
                     tg_port.peer,
                     tg_port.identifier,
                 ):
-                    self._port_links.append(
-                        PortLink(sut_port=sut_port, tg_port=tg_port)
-                    )
+                    self._port_links.append(PortLink(sut_port=sut_port,
 tg_port=tg_port))
 
     def set_up_suite(self) -> None:
         """
dts/framework/test_suite.py +0 -0
@@ -151,9 +149,7 @@ def configure_testbed_ipv4(self, restore: bool =

False) -> None:

     def _configure_ipv4_forwarding(self, enable: bool) -> None:
         self.sut_node.configure_ipv4_forwarding(enable)
dts/framework/test_suite.py +1 -3
-    def send_packet_and_capture(
-        self, packet: Packet, duration: float = 1
-    ) -> list[Packet]:
+    def send_packet_and_capture(self, packet: Packet, duration: float =

1) -> list[Packet]:
"""
Send a packet through the appropriate interface and receive on the appropriate interface.

dts/framework/test_suite.py +0 -0
@@ -202,21 +198,15 @@ def verify(self, condition: bool,

failure_description: str) -> None:

             self._fail_test_case_verify(failure_description)

     def _fail_test_case_verify(self, failure_description: str) -> None:
dts/framework/test_suite.py +0 -2
-        self._logger.debug(
-            "A test case failed, showing the last 10 commands executed

on SUT:"

dts/framework/test_suite.py +1 -1
-        )
+        self._logger.debug("A test case failed, showing the last 10

commands executed on SUT:")
for command_res in
self.sut_node.main_session.remote_session.history[-10:]:
self._logger.debug(command_res.command)

dts/framework/test_suite.py +0 -2
-        self._logger.debug(
-            "A test case failed, showing the last 10 commands executed

on TG:"

dts/framework/test_suite.py +1 -1
-        )
+        self._logger.debug("A test case failed, showing the last 10

commands executed on TG:")
for command_res in
self.tg_node.main_session.remote_session.history[-10:]:
self._logger.debug(command_res.command)
raise TestCaseVerifyError(failure_description)

dts/framework/test_suite.py +1 -3
-    def verify_packets(
-        self, expected_packet: Packet, received_packets: list[Packet]
-    ) -> None:
+    def verify_packets(self, expected_packet: Packet, received_packets:

list[Packet]) -> None:
for received_packet in received_packets:
if self._compare_packets(expected_packet, received_packet):
break

dts/framework/test_suite.py +0 -0
@@ -225,17 +215,11 @@ def verify_packets(
                 f"The expected packet

{get_packet_summaries(expected_packet)} "
f"not found among received
{get_packet_summaries(received_packets)}"

             )
dts/framework/test_suite.py +1 -3
-            self._fail_test_case_verify(
-                "An expected packet not found among received packets."
-            )
+            self._fail_test_case_verify("An expected packet not found

among received packets.")

dts/framework/test_suite.py +1 -3
-    def _compare_packets(
-        self, expected_packet: Packet, received_packet: Packet
-    ) -> bool:
+    def _compare_packets(self, expected_packet: Packet, received_packet:

Packet) -> bool:

         self._logger.debug(
dts/framework/test_suite.py +1 -3
-            "Comparing packets: \n"
-            f"{expected_packet.summary()}\n"
-            f"{received_packet.summary()}"
+            "Comparing packets: \n" f"{expected_packet.summary()}\n"
Quoted 2 lines

f"{received_packet.summary()}"

Same situation as above where you would want to make sure to put the f at the start.

Quoted 281 lines

)

l3 = IP in expected_packet.layers()

dts/framework/test_suite.py +0 -2
@@ -262,14 +246,10 @@ def _compare_packets(
             expected_payload = expected_payload.payload
 
         if expected_payload:
-            self._logger.debug(
-                f"The expected packet did not contain

{expected_payload}."

dts/framework/test_suite.py +1 -1
-            )
+            self._logger.debug(f"The expected packet did not contain

{expected_payload}.")

             return False
         if received_payload and received_payload.__class__ != Padding:
dts/framework/test_suite.py +0 -2
-            self._logger.debug(
-                "The received payload had extra layers which were not

padding."

dts/framework/test_suite.py +1 -1
-            )
+            self._logger.debug("The received payload had extra layers

which were not padding.")
return False
return True

dts/framework/test_suite.py +0 -0
@@ -296,10 +276,7 @@ def _verify_l2_frame(self, received_packet: Ether,

l3: bool) -> bool:

def _verify_l3_packet(self, received_packet: IP, expected_packet:
IP) -> bool:
self._logger.debug("Looking at the IP layer.")

dts/framework/test_suite.py +1 -4
-        if (
-            received_packet.src != expected_packet.src
-            or received_packet.dst != expected_packet.dst
-        ):
+        if received_packet.src != expected_packet.src or

received_packet.dst != expected_packet.dst:
return False
return True

dts/framework/test_suite.py +0 -0
@@ -373,9 +350,7 @@ def _get_test_cases(self, test_case_regex: str) ->

list[MethodType]:
if self._should_be_executed(test_case_name, test_case_regex):
filtered_test_cases.append(test_case)
cases_str = ", ".join((x.__name__ for x in filtered_test_cases))

dts/framework/test_suite.py +0 -2
-        self._logger.debug(
-            f"Found test cases '{cases_str}' in

{self.__class__.__name__}."

dts/framework/test_suite.py +1 -1
-        )
+        self._logger.debug(f"Found test cases '{cases_str}' in

{self.__class__.__name__}.")
return filtered_test_cases

def _should_be_executed(self, test_case_name: str, test_case_regex:
str) -> bool:

dts/framework/test_suite.py +0 -2
@@ -445,9 +420,7 @@ def _execute_test_case(
             self._logger.exception(f"Test case execution ERROR:
 {test_case_name}")
             test_case_result.update(Result.ERROR, e)
         except KeyboardInterrupt:
-            self._logger.error(
-                f"Test case execution INTERRUPTED by user:

{test_case_name}"

dts/framework/test_suite.py +1 -1
-            )
+            self._logger.error(f"Test case execution INTERRUPTED by

user: {test_case_name}")
test_case_result.update(Result.SKIP)
raise KeyboardInterrupt("Stop DTS")

dts/framework/test_suite.py +1 -3
@@ -464,9 +437,7 @@ def is_test_suite(object) -> bool:
     try:
         testcase_module = importlib.import_module(testsuite_module_path)
     except ModuleNotFoundError as e:
-        raise ConfigurationError(
-            f"Test suite '{testsuite_module_path}' not found."
-        ) from e
+        raise ConfigurationError(f"Test suite '{testsuite_module_path}'

not found.") from e
return [
test_suite_class
for _, test_suite_class in inspect.getmembers(testcase_module,
is_test_suite)

dts/framework/testbed_model/capturing_traffic_generator.py +1 -3
index ab98987f8e..48d019ab21 100644
@@ -110,9 +110,7 @@ def send_packets_and_capture(
             duration,
         )
 
-        self._logger.debug(
-            f"Received packets: {get_packet_summaries(received_packets)}"
-        )
+        self._logger.debug(f"Received packets:
 {get_packet_summaries(received_packets)}")
         self._write_capture_from_packets(capture_name, received_packets)
         return received_packets
dts/framework/testbed_model/hw/cpu.py +0 -0
index d1918a12dc..cbc5fe7fff 100644
@@ -54,9 +54,7 @@ def __init__(self, lcore_list: list[int] | list[str] |

list[LogicalCore] | str):

         # the input lcores may not be sorted
         self._lcore_list.sort()
dts/framework/testbed_model/hw/cpu.py +0 -2
-        self._lcore_str = (
-

f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'

dts/framework/testbed_model/hw/cpu.py +1 -1
-        )
+        self._lcore_str =

f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'

     @property
     def lcore_list(self) -> list[int]:
dts/framework/testbed_model/hw/cpu.py +0 -0
@@ -70,15 +68,11 @@ def _get_consecutive_lcores_range(self,

lcore_ids_list: list[int]) -> list[str]:

                 segment.append(lcore_id)
             else:
                 formatted_core_list.append(
dts/framework/testbed_model/hw/cpu.py +1 -3
-                    f"{segment[0]}-{segment[-1]}"
-                    if len(segment) > 1
-                    else f"{segment[0]}"
+                    f"{segment[0]}-{segment[-1]}" if len(segment) > 1

else f"{segment[0]}"

                 )
                 current_core_index = lcore_ids_list.index(lcore_id)
                 formatted_core_list.extend(
dts/framework/testbed_model/hw/cpu.py +1 -3
-                    self._get_consecutive_lcores_range(
-                        lcore_ids_list[current_core_index:]
-                    )
+

self._get_consecutive_lcores_range(lcore_ids_list[current_core_index:])

                 )
                 segment.clear()
                 break
dts/framework/testbed_model/hw/cpu.py +1 -3
@@ -125,9 +119,7 @@ def __init__(
         self._filter_specifier = filter_specifier
 
         # sorting by core is needed in case hyperthreading is enabled
-        self._lcores_to_filter = sorted(
-            lcore_list, key=lambda x: x.core, reverse=not ascending
-        )
+        self._lcores_to_filter = sorted(lcore_list, key=lambda x:
 x.core, reverse=not ascending)
         self.filter()
 

@abstractmethod

dts/framework/testbed_model/hw/cpu.py +1 -3
@@ -220,9 +212,7 @@ def _filter_cores_from_socket(
                 else:
                     # we have enough lcores per this core
                     continue
-            elif self._filter_specifier.cores_per_socket > len(
-                lcore_count_per_core_map
-            ):
+            elif self._filter_specifier.cores_per_socket >

len(lcore_count_per_core_map):

                 # only add cores if we need more
                 lcore_count_per_core_map[lcore.core] = 1
                 filtered_lcores.append(lcore)
dts/framework/testbed_model/node.py +0 -0
index fc01e0bf8e..ef700d8114 100644
@@ -103,18 +103,14 @@ def _tear_down_execution(self) -> None:
         is not decorated so that the derived class doesn't have to use

the decorator.

         """
dts/framework/testbed_model/node.py +1 -3
-    def set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def set_up_build_target(self, build_target_config:

BuildTargetConfiguration) -> None:
"""
Perform the build target setup that will be done for each build
target
tested on this node.
"""
self._set_up_build_target(build_target_config)

dts/framework/testbed_model/node.py +1 -3
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config:

BuildTargetConfiguration) -> None:
"""
This method exists to be optionally overwritten by derived
classes and
is not decorated so that the derived class doesn't have to use
the decorator.

dts/framework/testbed_model/scapy.py +0 -0
index af0d4dbb25..7948424951 100644
@@ -96,9 +96,7 @@ def scapy_send_packets_and_capture(
     return [scapy_packet.build() for scapy_packet in

sniffer.stop(join=True)]

dts/framework/testbed_model/scapy.py +1 -3
-def scapy_send_packets(
-    xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str
-) -> None:
+def scapy_send_packets(xmlrpc_packets: list[xmlrpc.client.Binary],

send_iface: str) -> None:
"""RPC function to send packets.

The function is meant to be executed on the remote TG node.

dts/framework/testbed_model/scapy.py +0 -0
@@ -197,9 +195,7 @@ class

ScapyTrafficGenerator(CapturingTrafficGenerator):
def __init__(self, tg_node: TGNode, config:
ScapyTrafficGeneratorConfig):
self._config = config
self._tg_node = tg_node

dts/framework/testbed_model/scapy.py +0 -2
-        self._logger = getLogger(
-            f"{self._tg_node.name}

{self._config.traffic_generator_type}"

dts/framework/testbed_model/scapy.py +1 -1
-        )
+        self._logger = getLogger(f"{self._tg_node.name}

{self._config.traffic_generator_type}")

         assert (
             self._tg_node.config.os == OS.linux
dts/framework/testbed_model/scapy.py +0 -0
@@ -218,9 +214,7 @@ def __init__(self, tg_node: TGNode, config:

ScapyTrafficGeneratorConfig):

self._start_xmlrpc_server_in_remote_python(xmlrpc_server_listen_port)

         # connect to the server
dts/framework/testbed_model/scapy.py +0 -2
-        server_url = (
-            f"http://

{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"

dts/framework/testbed_model/scapy.py +1 -1
-        )
+        server_url = f"http://

{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"

         self.rpc_server_proxy = xmlrpc.client.ServerProxy(
             server_url, allow_none=True, verbose=SETTINGS.verbose
         )
dts/framework/testbed_model/scapy.py +0 -0
@@ -240,9 +234,7 @@ def _start_xmlrpc_server_in_remote_python(self,

listen_port: int):
src = inspect.getsource(QuittableXMLRPCServer)
# Lines with only whitespace break the repl if in the middle of
a function

         # or class, so strip all lines containing only whitespace
dts/framework/testbed_model/scapy.py +0 -2
-        src = "\n".join(
-            [line for line in src.splitlines() if not line.isspace() and

line != ""]

dts/framework/testbed_model/scapy.py +1 -1
-        )
+        src = "\n".join([line for line in src.splitlines() if not

line.isspace() and line != ""])

         spacing = "\n" * 4
dts/framework/testbed_model/sut_node.py +1 -3
index 202aebfd06..dfd8c755b4 100644
@@ -129,9 +129,7 @@ def remote_dpdk_build_dir(self) -> PurePath:
     @property
     def dpdk_version(self) -> str:
         if self._dpdk_version is None:
-            self._dpdk_version = self.main_session.get_dpdk_version(
-                self._remote_dpdk_dir
-            )
+            self._dpdk_version =
 self.main_session.get_dpdk_version(self._remote_dpdk_dir)
         return self._dpdk_version
 

@property

dts/framework/testbed_model/sut_node.py +1 -2
@@ -149,8 +147,7 @@ def compiler_version(self) -> str:
                 )
             else:
                 self._logger.warning(
-                    "Failed to get compiler version because"
-                    "_build_target_config is None."
+                    "Failed to get compiler version because"
Quoted 2 lines

"_build_target_config is None."

Double string here.

Quoted 43 lines
                 )
                 return ""
         return self._compiler_version
dts/framework/testbed_model/sut_node.py +1 -3
@@ -163,9 +160,7 @@ def get_build_target_info(self) -> BuildTargetInfo:
     def _guess_dpdk_remote_dir(self) -> PurePath:
         return
 self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config:

BuildTargetConfiguration) -> None:

         """
         Setup DPDK on the SUT node.
         """
dts/framework/testbed_model/sut_node.py +1 -3
@@ -177,22 +172,17 @@ def _set_up_build_target(
         self._copy_dpdk_tarball()
         self._build_dpdk()
 
-    def _configure_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _configure_build_target(self, build_target_config:

BuildTargetConfiguration) -> None:
"""
Populate common environment variables and set build target
config.

         """
         self._env_vars = {}
         self._build_target_config = build_target_config
dts/framework/testbed_model/sut_node.py +0 -2
-        self._env_vars.update(
-

self.main_session.get_dpdk_build_env_vars(build_target_config.arch)

dts/framework/testbed_model/sut_node.py +1 -1
-        )
+

self._env_vars.update(self.main_session.get_dpdk_build_env_vars(build_target_config.arch))
self._env_vars["CC"] = build_target_config.compiler.name
if build_target_config.compiler_wrapper:
self._env_vars["CC"] = (

dts/framework/testbed_model/sut_node.py +1 -2
-                f"'{build_target_config.compiler_wrapper} "
-                f"{build_target_config.compiler.name}'"
+                f"'{build_target_config.compiler_wrapper} " f"{
Quoted 2 lines

build_target_config.compiler.name}'"

Double string here.

Quoted 75 lines
             )

     @Node.skip_setup
dts/framework/testbed_model/sut_node.py +1 -3
@@ -224,9 +214,7 @@ def _copy_dpdk_tarball(self) -> None:
         self.main_session.remove_remote_dir(self._remote_dpdk_dir)
 
         # then extract to remote path
-        self.main_session.extract_remote_tarball(
-            remote_tarball_path, self._remote_dpdk_dir
-        )
+        self.main_session.extract_remote_tarball(remote_tarball_path,
 self._remote_dpdk_dir)
 
     @Node.skip_setup
     def _build_dpdk(self) -> None:
dts/framework/testbed_model/sut_node.py +1 -3
@@ -263,9 +251,7 @@ def build_dpdk_app(self, app_name: str,
 **meson_dpdk_args: str | bool) -> PurePa
         )
 
         if app_name == "all":
-            return self.main_session.join_remote_path(
-                self.remote_dpdk_build_dir, "examples"
-            )
+            return
 self.main_session.join_remote_path(self.remote_dpdk_build_dir, "examples")
         return self.main_session.join_remote_path(

self.remote_dpdk_build_dir, "examples", f"dpdk-{app_name}"
)

dts/framework/testbed_model/sut_node.py +2 -7
@@ -319,9 +305,7 @@ def create_eal_parameters(
                 '-c 0xf -a 0000:88:00.0
--file-prefix=dpdk_1112_20190809143420';
         """
 
-        lcore_list = LogicalCoreList(
-            self.filter_lcores(lcore_filter_specifier, ascending_cores)
-        )
+        lcore_list =
 LogicalCoreList(self.filter_lcores(lcore_filter_specifier, ascending_cores))
 
         if append_prefix_timestamp:
             prefix = f"{prefix}_{self._dpdk_timestamp}"
@@ -386,6 +370,4 @@ def create_interactive_shell(
                 self.remote_dpdk_build_dir, shell_cls.path
             )
 
-        return super().create_interactive_shell(
-            shell_cls, timeout, privileged, str(eal_parameters)
-        )
+        return super().create_interactive_shell(shell_cls, timeout,

privileged, str(eal_parameters))

dts/framework/testbed_model/tg_node.py +1 -3
index 27025cfa31..dca4ec0849 100644
@@ -45,9 +45,7 @@ class TGNode(Node):
 
     def __init__(self, node_config: TGNodeConfiguration):
         super(TGNode, self).__init__(node_config)
-        self.traffic_generator = create_traffic_generator(
-            self, node_config.traffic_generator
-        )
+        self.traffic_generator = create_traffic_generator(self,
 node_config.traffic_generator)
         self._logger.info(f"Created node: {self.name}")
 
     def send_packet_and_capture(
dts/framework/testbed_model/tg_node.py +1 -2
@@ -94,6 +92,5 @@ def create_traffic_generator(
             return ScapyTrafficGenerator(tg_node,
 traffic_generator_config)
         case _:
             raise ConfigurationError(
-                "Unknown traffic generator: "
-                f"{traffic_generator_config.traffic_generator_type}"
+                "Unknown traffic generator: "
Quoted 2 lines

f"{traffic_generator_config.traffic_generator_type}"

Double string but one that needs the whole thing to be an f-string.

Quoted 131 lines
             )
dts/framework/utils.py +1 -3
index d27c2c5b5f..d098d364ff 100644
@@ -19,9 +19,7 @@
 
 class StrEnum(Enum):
     @staticmethod
-    def _generate_next_value_(
-        name: str, start: int, count: int, last_values: object
-    ) -> str:
+    def _generate_next_value_(name: str, start: int, count: int,

last_values: object) -> str:

         return name

     def __str__(self) -> str:
dts/framework/utils.py +1 -3
@@ -32,9 +30,7 @@ def __str__(self) -> str:
 
 
 def check_dts_python_version() -> None:
-    if sys.version_info.major < 3 or (
-        sys.version_info.major == 3 and sys.version_info.minor < 10
-    ):
+    if sys.version_info.major < 3 or (sys.version_info.major == 3 and

sys.version_info.minor < 10):

         print(
             RED(
                 (
dts/framework/utils.py +1 -3
@@ -60,9 +56,7 @@ def expand_range(range_str: str) -> list[int]:
         range_boundaries = range_str.split("-")
         # will throw an exception when items in range_boundaries can't
 be converted,
         # serving as type check
-        expanded_range.extend(
-            range(int(range_boundaries[0]), int(range_boundaries[-1]) +
 1)
-        )
+        expanded_range.extend(range(int(range_boundaries[0]),
 int(range_boundaries[-1]) + 1))

return expanded_range

dts/framework/utils.py +1 -3
@@ -71,9 +65,7 @@ def get_packet_summaries(packets: list[Packet]):
     if len(packets) == 1:
         packet_summaries = packets[0].summary()
     else:
-        packet_summaries = json.dumps(
-            list(map(lambda pkt: pkt.summary(), packets)), indent=4
-        )
+        packet_summaries = json.dumps(list(map(lambda pkt:
 pkt.summary(), packets)), indent=4)
     return f"Packet contents: \n{packet_summaries}"
 
@@ -94,9 +86,7 @@ class MesonArgs(object):
     _default_library: str
 
     def __init__(self, default_library: str | None = None, **dpdk_args:

str | bool):

dts/framework/utils.py +0 -2
-        self._default_library = (
-            f"--default-library={default_library}" if default_library

else ""

dts/framework/utils.py +1 -1
-        )
+        self._default_library = f"--default-library={default_library}"

if default_library else ""

         self._dpdk_args = " ".join(
             (
                 f"-D{dpdk_arg_name}={dpdk_arg_value}"
dts/pyproject.toml +0 -1
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
 [tool.pylama]
 linters = "mccabe,pycodestyle,pyflakes"
 format = "pylint"
-max_line_length = 88 #

https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length

dts/pyproject.toml +1 -1
+max_line_length = 100
 
 [tool.mypy]
 python_version = "3.10"
@@ -55,4 +55,4 @@ profile = "black"
 [tool.black]
 target-version = ['py310']
 include = '\.pyi?$'
-line-length = 88 #

https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length
<https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length+line-length>
= 100

dts/tests/TestSuite_hello_world.py +1 -3
index 7e3d95c0cf..768ba1cfa8 100644
@@ -34,9 +34,7 @@ def test_hello_world_single_core(self) -> None:
         # get the first usable core
         lcore_amount = LogicalCoreCount(1, 1, 1)
         lcores = LogicalCoreCountFilter(self.sut_node.lcores,
 lcore_amount).filter()
-        eal_para = self.sut_node.create_eal_parameters(
-            lcore_filter_specifier=lcore_amount
-        )
+        eal_para =
 self.sut_node.create_eal_parameters(lcore_filter_specifier=lcore_amount)
         result = self.sut_node.run_dpdk_app(self.app_helloworld_path,

eal_para)
self.verify(
f"hello from core {int(lcores[0])}" in result.stdout,

dts/tests/TestSuite_smoke_tests.py +0 -2
index 4a269df75b..36119e6469 100644
@@ -45,13 +45,10 @@ def test_driver_tests(self) -> None:
         for dev in self.sut_node.virtual_devices:
             vdev_args += f"--vdev {dev} "
         vdev_args = vdev_args[:-1]
-        driver_tests_command = (
-            f"meson test -C {self.dpdk_build_dir_path} --suite

driver-tests"

dts/tests/TestSuite_smoke_tests.py +1 -1
-        )
+        driver_tests_command = f"meson test -C

{self.dpdk_build_dir_path} --suite driver-tests"

         if vdev_args:
             self._logger.info(
dts/tests/TestSuite_smoke_tests.py +1 -2
-                "Running driver tests with the following virtual "
-                f"devices: {vdev_args}"
+                "Running driver tests with the following virtual "
Quoted 2 lines

f"devices: {vdev_args}"

Double string that should be an f-string.

Quoted 20 lines
             )
             driver_tests_command += f' --test-args "{vdev_args}"'
dts/tests/TestSuite_smoke_tests.py +0 -0
@@ -67,9 +64,7 @@ def test_devices_listed_in_testpmd(self) -> None:
         Test:
             Uses testpmd driver to verify that devices have been found

by testpmd.

         """
dts/tests/TestSuite_smoke_tests.py +1 -3
-        testpmd_driver = self.sut_node.create_interactive_shell(
-            TestPmdShell, privileged=True
-        )
+        testpmd_driver =

self.sut_node.create_interactive_shell(TestPmdShell, privileged=True)
dev_list = [str(x) for x in testpmd_driver.get_devices()] for nic in self.nics_in_node:
self.verify(
--
2.34.1

Acked-by on v2 2/2
#16 lore raw

Re: [PATCH v2 2/2] dts: reformat to 100 line length

In reply to Juraj Linkeš
Quoted 3 lines · Juraj Linkeš

Reformat to 100 from the previous 88 to unify with C recommendations.

Generally for something like this we wouldn't reformat the existing code, because it confuses the git history e.g. for those looking for "fixlines" for bug fixes. However, given that DTS is so new in the repo, it's probably ok and worthwhile doing.

#17 lore raw

Re: [PATCH v2 2/2] dts: reformat to 100 line length

Quoted 4 lines · Bruce Richardson
Quoted 2 lines · Juraj Linkeš

Reformat to 100 from the previous 88 to unify with C recommendations.

Quoted 8 lines
Quoted 1 line

Generally for something like this we wouldn't reformat the existing code, because it confuses the git history e.g. for those looking for "fixlines" for bug fixes. However, given that DTS is so new in the repo, it's probably ok and worthwhile doing.

Thanks for pointing this out, Bruce, I'll keep it in mind for the future. For now, it's kinda necessary we do this because our reformat tool, Black, reformats the whole codebase so I think the pros outweigh the cons.

One more thing: I originally wanted to put this config part into the first patch (I wanted this patch to be only code changes) which I plan on fixing in the next version:

dts/pyproject.toml +0 -1
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
 [tool.pylama]
 linters = "mccabe,pycodestyle,pyflakes"
 format = "pylint"
-max_line_length = 88 #

https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+max_line_length = 100

[tool.mypy]
python_version = "3.10"
@@ -55,4 +55,4 @@ profile = "black"
[tool.black]
target-version = ['py310']
include = '\.pyi?$'
-line-length = 88 #
https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length
<https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length+line-length>
= 100

#18 lore raw

Re: [PATCH v2 2/2] dts: reformat to 100 line length

Quoted 13 lines · Juraj Linkeš
Quoted 11 lines · Bruce Richardson
Quoted 3 lines · Juraj Linkeš

Reformat to 100 from the previous 88 to unify with C recommendations.

Generally for something like this we wouldn't reformat the existing code, because it confuses the git history e.g. for those looking for "fixlines" for bug fixes. However, given that DTS is so new in the repo, it's probably ok and worthwhile doing.

Quoted 7 lines
Quoted 1 line

Thanks for pointing this out, Bruce, I'll keep it in mind for the future. For now, it's kinda necessary we do this because our reformat tool, Black, reformats the whole codebase so I think the pros outweigh the cons.

Agreed

#20 lore raw

PATCH v3 1/2 doc: increase python max line length to 100

In reply to Juraj Linkeš

Unify with C recommendations which allow line length of up to 100 characters.

---
 .editorconfig                            | 2 +-
 doc/doc_build/meson-private/meson.lock   | 0
 doc/guides/contributing/coding_style.rst | 3 +++
 dts/pyproject.toml                       | 4 ++--
 4 files changed, 6 insertions(+), 3 deletions(-)
 create mode 100644 doc/doc_build/meson-private/meson.lock
.editorconfig +1 -1
index ab41c95085..1e7d74213f 100644
@@ -16,7 +16,7 @@ max_line_length = 100
 [*.py]
 indent_style = space
 indent_size = 4
-max_line_length = 79
+max_line_length = 100
 
 [meson.build]
 indent_style = space
doc/doc_build/meson-private/meson.lock new file +0 -0
new file mode 100644
index 0000000000..e69de29bb2
doc/guides/contributing/coding_style.rst +3 -0
index 648849899d..a42cd3d58d 100644
@@ -880,6 +880,9 @@ All Python code should be compliant with
 `PEP8 (Style Guide for Python Code) <https://www.python.org/dev/peps/pep-0008/>`_.
 
 The ``pep8`` tool can be used for testing compliance with the guidelines.
+Note that line lengths are acceptable up to 100 characters, which is in line with C recommendations.
+
+..
 
 Integrating with the Build System
 ---------------------------------
dts/pyproject.toml +2 -2
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
 [tool.pylama]
 linters = "mccabe,pycodestyle,pyflakes"
 format = "pylint"
-max_line_length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+max_line_length = 100
 
 [tool.mypy]
 python_version = "3.10"
@@ -55,4 +55,4 @@ profile = "black"
 [tool.black]
 target-version = ['py310']
 include = '\.pyi?$'
-line-length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length = 100
Signature · 1 line
2.34.1
#21 lore raw

PATCH v3 2/2 dts: reformat to 100 line length

Reformat to 100 from the previous 88 to unify with C recommendations.

---
 dts/framework/config/__init__.py              | 20 ++-----
 dts/framework/dts.py                          | 15 ++---
 dts/framework/exception.py                    |  5 +-
 dts/framework/remote_session/__init__.py      |  4 +-
 dts/framework/remote_session/linux_session.py | 39 ++++---------
 dts/framework/remote_session/posix_session.py | 30 +++-------
 .../remote/interactive_remote_session.py      |  7 +--
 .../remote/interactive_shell.py               |  4 +-
 .../remote_session/remote/remote_session.py   |  8 +--
 .../remote_session/remote/ssh_session.py      | 16 ++----
 .../remote_session/remote/testpmd_shell.py    |  8 +--
 dts/framework/settings.py                     | 15 ++---
 dts/framework/test_result.py                  | 16 ++----
 dts/framework/test_suite.py                   | 57 +++++--------------
 .../capturing_traffic_generator.py            |  7 +--
 dts/framework/testbed_model/hw/cpu.py         | 20 ++-----
 dts/framework/testbed_model/node.py           |  8 +--
 dts/framework/testbed_model/scapy.py          | 19 ++-----
 dts/framework/testbed_model/sut_node.py       | 40 ++++---------
 dts/framework/testbed_model/tg_node.py        |  7 +--
 dts/framework/utils.py                        | 20 ++-----
 dts/tests/TestSuite_hello_world.py            |  4 +-
 dts/tests/TestSuite_smoke_tests.py            | 11 +---
 23 files changed, 99 insertions(+), 281 deletions(-)
dts/framework/config/__init__.py +5 -15
index cb7e00ba34..9b32cf0532 100644
@@ -140,9 +140,7 @@ def from_dict(d: dict) -> Union["SutNodeConfiguration", "TGNodeConfiguration"]:
 
         if "traffic_generator" in d:
             return TGNodeConfiguration(
-                traffic_generator=TrafficGeneratorConfig.from_dict(
-                    d["traffic_generator"]
-                ),
+                traffic_generator=TrafficGeneratorConfig.from_dict(d["traffic_generator"]),
                 **common_config,
             )
         else:
@@ -249,9 +247,7 @@ def from_dict(
         build_targets: list[BuildTargetConfiguration] = list(
             map(BuildTargetConfiguration.from_dict, d["build_targets"])
         )
-        test_suites: list[TestSuiteConfig] = list(
-            map(TestSuiteConfig.from_dict, d["test_suites"])
-        )
+        test_suites: list[TestSuiteConfig] = list(map(TestSuiteConfig.from_dict, d["test_suites"]))
         sut_name = d["system_under_test_node"]["node_name"]
         skip_smoke_tests = d.get("skip_smoke_tests", False)
         assert sut_name in node_map, f"Unknown SUT {sut_name} in execution {d}"
@@ -268,9 +264,7 @@ def from_dict(
         ), f"Invalid TG configuration {traffic_generator_node}"
 
         vdevs = (
-            d["system_under_test_node"]["vdevs"]
-            if "vdevs" in d["system_under_test_node"]
-            else []
+            d["system_under_test_node"]["vdevs"] if "vdevs" in d["system_under_test_node"] else []
         )
         return ExecutionConfiguration(
             build_targets=build_targets,
@@ -299,9 +293,7 @@ def from_dict(d: dict) -> "Configuration":
         assert len(nodes) == len(node_map), "Duplicate node names are not allowed"
 
         executions: list[ExecutionConfiguration] = list(
-            map(
-                ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d]
-            )
+            map(ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d])
         )
 
         return Configuration(executions=executions)
@@ -315,9 +307,7 @@ def load_config() -> Configuration:
     with open(SETTINGS.config_file_path, "r") as f:
         config_data = yaml.safe_load(f)
 
-    schema_path = os.path.join(
-        pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json"
-    )
+    schema_path = os.path.join(pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json")
 
     with open(schema_path, "r") as f:
         schema = json.load(f)
dts/framework/dts.py +4 -11
index f773f0c38d..25d6942d81 100644
@@ -92,9 +92,7 @@ def _run_execution(
     Run the given execution. This involves running the execution setup as well as
     running all build targets in the given execution.
     """
-    dts_logger.info(
-        f"Running execution with SUT '{execution.system_under_test_node.name}'."
-    )
+    dts_logger.info(f"Running execution with SUT '{execution.system_under_test_node.name}'.")
     execution_result = result.add_execution(sut_node.config)
     execution_result.add_sut_info(sut_node.node_info)
 
@@ -107,9 +105,7 @@ def _run_execution(
 
     else:
         for build_target in execution.build_targets:
-            _run_build_target(
-                sut_node, tg_node, build_target, execution, execution_result
-            )
+            _run_build_target(sut_node, tg_node, build_target, execution, execution_result)
 
     finally:
         try:
@@ -170,13 +166,10 @@ def _run_all_suites(
         execution.test_suites[:0] = [TestSuiteConfig.from_dict("smoke_tests")]
     for test_suite_config in execution.test_suites:
         try:
-            _run_single_suite(
-                sut_node, tg_node, execution, build_target_result, test_suite_config
-            )
+            _run_single_suite(sut_node, tg_node, execution, build_target_result, test_suite_config)
         except BlockingTestSuiteError as e:
             dts_logger.exception(
-                f"An error occurred within {test_suite_config.test_suite}. "
-                "Skipping build target..."
+                f"An error occurred within {test_suite_config.test_suite}. Skipping build target."
             )
             result.add_error(e)
             end_build_target = True
dts/framework/exception.py +1 -4
index 001a5a5496..b362e42924 100644
@@ -116,10 +116,7 @@ def __init__(self, command: str, command_return_code: int):
         self.command_return_code = command_return_code
 
     def __str__(self) -> str:
-        return (
-            f"Command {self.command} returned a non-zero exit code: "
-            f"{self.command_return_code}"
-        )
+        return f"Command {self.command} returned a non-zero exit code: {self.command_return_code}"
 
 
 class RemoteDirectoryExistsError(DTSError):
dts/framework/remote_session/__init__.py +1 -3
index 00b6d1f03a..6124417bd7 100644
@@ -30,9 +30,7 @@
 )
 
 
-def create_session(
-    node_config: NodeConfiguration, name: str, logger: DTSLOG
-) -> OSSession:
+def create_session(node_config: NodeConfiguration, name: str, logger: DTSLOG) -> OSSession:
     match node_config.os:
         case OS.linux:
             return LinuxSession(node_config, name, logger)
dts/framework/remote_session/linux_session.py +10 -29
index a3f1a6bf3b..fd877fbfae 100644
@@ -82,9 +82,7 @@ def setup_hugepages(self, hugepage_amount: int, force_first_numa: bool) -> None:
         self._mount_huge_pages()
 
     def _get_hugepage_size(self) -> int:
-        hugepage_size = self.send_command(
-            "awk '/Hugepagesize/ {print $2}' /proc/meminfo"
-        ).stdout
+        hugepage_size = self.send_command("awk '/Hugepagesize/ {print $2}' /proc/meminfo").stdout
         return int(hugepage_size)
 
     def _get_hugepages_total(self) -> int:
@@ -120,13 +118,9 @@ def _supports_numa(self) -> bool:
         # there's no reason to do any numa specific configuration)
         return len(self._numa_nodes) > 1
 
-    def _configure_huge_pages(
-        self, amount: int, size: int, force_first_numa: bool
-    ) -> None:
+    def _configure_huge_pages(self, amount: int, size: int, force_first_numa: bool) -> None:
         self._logger.info("Configuring Hugepages.")
-        hugepage_config_path = (
-            f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
-        )
+        hugepage_config_path = f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
         if force_first_numa and self._supports_numa():
             # clear non-numa hugepages
             self.send_command(f"echo 0 | tee {hugepage_config_path}", privileged=True)
@@ -135,24 +129,18 @@ def _configure_huge_pages(
                 f"/hugepages-{size}kB/nr_hugepages"
             )
 
-        self.send_command(
-            f"echo {amount} | tee {hugepage_config_path}", privileged=True
-        )
+        self.send_command(f"echo {amount} | tee {hugepage_config_path}", privileged=True)
 
     def update_ports(self, ports: list[Port]) -> None:
         self._logger.debug("Gathering port info.")
         for port in ports:
-            assert (
-                port.node == self.name
-            ), "Attempted to gather port info on the wrong node"
+            assert port.node == self.name, "Attempted to gather port info on the wrong node"
 
         port_info_list = self._get_lshw_info()
         for port in ports:
             for port_info in port_info_list:
                 if f"pci@{port.pci}" == port_info.get("businfo"):
-                    self._update_port_attr(
-                        port, port_info.get("logicalname"), "logical_name"
-                    )
+                    self._update_port_attr(port, port_info.get("logicalname"), "logical_name")
                     self._update_port_attr(port, port_info.get("serial"), "mac_address")
                     port_info_list.remove(port_info)
                     break
@@ -163,25 +151,18 @@ def _get_lshw_info(self) -> list[LshwOutput]:
         output = self.send_command("lshw -quiet -json -C network", verify=True)
         return json.loads(output.stdout)
 
-    def _update_port_attr(
-        self, port: Port, attr_value: str | None, attr_name: str
-    ) -> None:
+    def _update_port_attr(self, port: Port, attr_value: str | None, attr_name: str) -> None:
         if attr_value:
             setattr(port, attr_name, attr_value)
-            self._logger.debug(
-                f"Found '{attr_name}' of port {port.pci}: '{attr_value}'."
-            )
+            self._logger.debug(f"Found '{attr_name}' of port {port.pci}: '{attr_value}'.")
         else:
             self._logger.warning(
-                f"Attempted to get '{attr_name}' of port {port.pci}, "
-                f"but it doesn't exist."
+                f"Attempted to get '{attr_name}' of port {port.pci}, but it doesn't exist."
             )
 
     def configure_port_state(self, port: Port, enable: bool) -> None:
         state = "up" if enable else "down"
-        self.send_command(
-            f"ip link set dev {port.logical_name} {state}", privileged=True
-        )
+        self.send_command(f"ip link set dev {port.logical_name} {state}", privileged=True)
 
     def configure_port_ip_address(
         self,
dts/framework/remote_session/posix_session.py +8 -22
index 5da0516e05..a29e2e8280 100644
@@ -94,8 +94,7 @@ def extract_remote_tarball(
         expected_dir: str | PurePath | None = None,
     ) -> None:
         self.send_command(
-            f"tar xfm {remote_tarball_path} "
-            f"-C {PurePosixPath(remote_tarball_path).parent}",
+            f"tar xfm {remote_tarball_path} -C {PurePosixPath(remote_tarball_path).parent}",
             60,
         )
         if expected_dir:
@@ -125,8 +124,7 @@ def build_dpdk(
                 self._logger.info("Configuring DPDK build from scratch.")
                 self.remove_remote_dir(remote_dpdk_build_dir)
                 self.send_command(
-                    f"meson setup "
-                    f"{meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
+                    f"meson setup {meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
                     timeout,
                     verify=True,
                     env=env_vars,
@@ -140,9 +138,7 @@ def build_dpdk(
             raise DPDKBuildError(f"DPDK build failed when doing '{e.command}'.")
 
     def get_dpdk_version(self, build_dir: str | PurePath) -> str:
-        out = self.send_command(
-            f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True
-        )
+        out = self.send_command(f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True)
         return out.stdout
 
     def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
@@ -156,9 +152,7 @@ def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
             self._check_dpdk_hugepages(dpdk_runtime_dirs)
             self._remove_dpdk_runtime_dirs(dpdk_runtime_dirs)
 
-    def _get_dpdk_runtime_dirs(
-        self, dpdk_prefix_list: Iterable[str]
-    ) -> list[PurePosixPath]:
+    def _get_dpdk_runtime_dirs(self, dpdk_prefix_list: Iterable[str]) -> list[PurePosixPath]:
         prefix = PurePosixPath("/var", "run", "dpdk")
         if not dpdk_prefix_list:
             remote_prefixes = self._list_remote_dirs(prefix)
@@ -174,9 +168,7 @@ def _list_remote_dirs(self, remote_path: str | PurePath) -> list[str] | None:
         Return a list of directories of the remote_dir.
         If remote_path doesn't exist, return None.
         """
-        out = self.send_command(
-            f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'"
-        ).stdout
+        out = self.send_command(f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'").stdout
         if "No such file or directory" in out:
             return None
         else:
@@ -200,9 +192,7 @@ def _remote_files_exists(self, remote_path: PurePath) -> bool:
         result = self.send_command(f"test -e {remote_path}")
         return not result.return_code
 
-    def _check_dpdk_hugepages(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _check_dpdk_hugepages(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             hugepage_info = PurePosixPath(dpdk_runtime_dir, "hugepage_info")
             if self._remote_files_exists(hugepage_info):
@@ -213,9 +203,7 @@ def _check_dpdk_hugepages(
                     self._logger.warning(out)
                     self._logger.warning("*******************************************")
 
-    def _remove_dpdk_runtime_dirs(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _remove_dpdk_runtime_dirs(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             self.remove_remote_dir(dpdk_runtime_dir)
 
@@ -245,6 +233,4 @@ def get_node_info(self) -> NodeInfo:
             SETTINGS.timeout,
         ).stdout.split("\n")
         kernel_version = self.send_command("uname -r", SETTINGS.timeout).stdout
-        return NodeInfo(
-            os_release_info[0].strip(), os_release_info[1].strip(), kernel_version
-        )
+        return NodeInfo(os_release_info[0].strip(), os_release_info[1].strip(), kernel_version)
dts/framework/remote_session/remote/interactive_remote_session.py +2 -5
index 9085a668e8..098ded1bb0 100644
@@ -73,9 +73,7 @@ def __init__(self, node_config: NodeConfiguration, _logger: DTSLOG) -> None:
             f"Initializing interactive connection for {self.username}@{self.hostname}"
         )
         self._connect()
-        self._logger.info(
-            f"Interactive connection successful for {self.username}@{self.hostname}"
-        )
+        self._logger.info(f"Interactive connection successful for {self.username}@{self.hostname}")
 
     def _connect(self) -> None:
         """Establish a connection to the node.
@@ -108,8 +106,7 @@ def _connect(self) -> None:
                 self._logger.debug(traceback.format_exc())
                 self._logger.warning(e)
                 self._logger.info(
-                    "Retrying interactive session connection: "
-                    f"retry number {retry_attempt +1}"
+                    f"Retrying interactive session connection: retry number {retry_attempt +1}"
                 )
             else:
                 break
dts/framework/remote_session/remote/interactive_shell.py +1 -3
index c24376b2a8..4db19fb9b3 100644
@@ -85,9 +85,7 @@ def __init__(
         self._app_args = app_args
         self._start_application(get_privileged_command)
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """Starts a new interactive application based on the path to the app.
 
         This method is often overridden by subclasses as their process for
dts/framework/remote_session/remote/remote_session.py +2 -6
index 0647d93de4..719f7d1ef7 100644
@@ -96,9 +96,7 @@ def send_command(
         If verify is True, check the return code of the executed command
         and raise a RemoteCommandExecutionError if the command failed.
         """
-        self._logger.info(
-            f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else "")
-        )
+        self._logger.info(f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else ""))
         result = self._send_command(command, timeout, env)
         if verify and result.return_code:
             self._logger.debug(
@@ -112,9 +110,7 @@ def send_command(
         return result
 
     @abstractmethod
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """
         Use the underlying protocol to execute the command using optional env vars
         and return CommandResult.
dts/framework/remote_session/remote/ssh_session.py +4 -12
index 8d127f1601..1a7ee649ab 100644
@@ -80,9 +80,7 @@ def _connect(self) -> None:
                 if error not in errors:
                     errors.append(error)
 
-                self._logger.info(
-                    f"Retrying connection: retry number {retry_attempt + 1}."
-                )
+                self._logger.info(f"Retrying connection: retry number {retry_attempt + 1}.")
 
             else:
                 break
@@ -92,9 +90,7 @@ def _connect(self) -> None:
     def is_alive(self) -> bool:
         return self.session.is_connected
 
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """Send a command and return the result of the execution.
 
         Args:
@@ -107,9 +103,7 @@ def _send_command(
             SSHTimeoutError: The command execution timed out.
         """
         try:
-            output = self.session.run(
-                command, env=env, warn=True, hide=True, timeout=timeout
-            )
+            output = self.session.run(command, env=env, warn=True, hide=True, timeout=timeout)
 
         except (UnexpectedExit, ThreadException) as e:
             self._logger.exception(e)
@@ -119,9 +113,7 @@ def _send_command(
             self._logger.exception(e)
             raise SSHTimeoutError(command, e.result.stderr) from e
 
-        return CommandResult(
-            self.name, command, output.stdout, output.stderr, output.return_code
-        )
+        return CommandResult(self.name, command, output.stdout, output.stderr, output.return_code)
 
     def copy_from(
         self,
dts/framework/remote_session/remote/testpmd_shell.py +2 -6
index 1455b5a199..08ac311016 100644
@@ -21,13 +21,9 @@ class TestPmdShell(InteractiveShell):
     path: PurePath = PurePath("app", "dpdk-testpmd")
     dpdk_app: bool = True
     _default_prompt: str = "testpmd>"
-    _command_extra_chars: str = (
-        "\n"  # We want to append an extra newline to every command
-    )
+    _command_extra_chars: str = "\n"  # We want to append an extra newline to every command
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """See "_start_application" in InteractiveShell."""
         self._app_args += " -- -i"
         super()._start_application(get_privileged_command)
dts/framework/settings.py +5 -10
index cfa39d011b..974793a11a 100644
@@ -72,9 +72,8 @@ class _Settings:
 
 def _get_parser() -> argparse.ArgumentParser:
     parser = argparse.ArgumentParser(
-        description="Run DPDK test suites. All options may be specified with "
-        "the environment variables provided in brackets. "
-        "Command line arguments have higher priority.",
+        description="Run DPDK test suites. All options may be specified with the environment "
+        "variables provided in brackets. Command line arguments have higher priority.",
         formatter_class=argparse.ArgumentDefaultsHelpFormatter,
     )
 
@@ -82,8 +81,7 @@ def _get_parser() -> argparse.ArgumentParser:
         "--config-file",
         action=_env_arg("DTS_CFG_FILE"),
         default="conf.yaml",
-        help="[DTS_CFG_FILE] configuration file that describes the test cases, SUTs "
-        "and targets.",
+        help="[DTS_CFG_FILE] configuration file that describes the test cases, SUTs and targets.",
     )
 
     parser.add_argument(
@@ -100,8 +98,7 @@ def _get_parser() -> argparse.ArgumentParser:
         action=_env_arg("DTS_TIMEOUT"),
         default=15,
         type=float,
-        help="[DTS_TIMEOUT] The default timeout for all DTS operations except for "
-        "compiling DPDK.",
+        help="[DTS_TIMEOUT] The default timeout for all DTS operations except for compiling DPDK.",
     )
 
     parser.add_argument(
@@ -170,9 +167,7 @@ def _get_settings() -> _Settings:
         timeout=parsed_args.timeout,
         verbose=(parsed_args.verbose == "Y"),
         skip_setup=(parsed_args.skip_setup == "Y"),
-        dpdk_tarball_path=Path(
-            DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir)
-        )
+        dpdk_tarball_path=Path(DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir))
         if not os.path.exists(parsed_args.tarball)
         else Path(parsed_args.tarball),
         compile_timeout=parsed_args.compile_timeout,
dts/framework/test_result.py +4 -12
index f0fbe80f6f..4c2e7e2418 100644
@@ -83,9 +83,7 @@ def __iadd__(self, other: Result) -> "Statistics":
         """
         self[other.name] += 1
         self["PASS RATE"] = (
-            float(self[Result.PASS.name])
-            * 100
-            / sum(self[result.name] for result in Result)
+            float(self[Result.PASS.name]) * 100 / sum(self[result.name] for result in Result)
         )
         return self
 
@@ -135,9 +133,7 @@ def _get_setup_teardown_errors(self) -> list[Exception]:
 
     def _get_inner_errors(self) -> list[Exception]:
         return [
-            error
-            for inner_result in self._inner_results
-            for error in inner_result.get_errors()
+            error for inner_result in self._inner_results for error in inner_result.get_errors()
         ]
 
     def get_errors(self) -> list[Exception]:
@@ -174,9 +170,7 @@ def add_stats(self, statistics: Statistics) -> None:
         statistics += self.result
 
     def __bool__(self) -> bool:
-        return (
-            bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
-        )
+        return bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
 
 
 class TestSuiteResult(BaseResult):
@@ -247,9 +241,7 @@ def __init__(self, sut_node: NodeConfiguration):
         super(ExecutionResult, self).__init__()
         self.sut_node = sut_node
 
-    def add_build_target(
-        self, build_target: BuildTargetConfiguration
-    ) -> BuildTargetResult:
+    def add_build_target(self, build_target: BuildTargetConfiguration) -> BuildTargetResult:
         build_target_result = BuildTargetResult(build_target)
         self._inner_results.append(build_target_result)
         return build_target_result
dts/framework/test_suite.py +14 -43

121 lines not on this page · raw message

dts/framework/testbed_model/capturing_traffic_generator.py +2 -5
index ab98987f8e..e6512061d7 100644
@@ -100,8 +100,7 @@ def send_packets_and_capture(
         """
         self._logger.debug(get_packet_summaries(packets))
         self._logger.debug(
-            f"Sending packet on {send_port.logical_name}, "
-            f"receiving on {receive_port.logical_name}."
+            f"Sending packet on {send_port.logical_name}, receiving on {receive_port.logical_name}."
         )
         received_packets = self._send_packets_and_capture(
             packets,
@@ -110,9 +109,7 @@ def send_packets_and_capture(
             duration,
         )
 
-        self._logger.debug(
-            f"Received packets: {get_packet_summaries(received_packets)}"
-        )
+        self._logger.debug(f"Received packets: {get_packet_summaries(received_packets)}")
         self._write_capture_from_packets(capture_name, received_packets)
         return received_packets
 
dts/framework/testbed_model/hw/cpu.py +5 -15
index d1918a12dc..cbc5fe7fff 100644
@@ -54,9 +54,7 @@ def __init__(self, lcore_list: list[int] | list[str] | list[LogicalCore] | str):
 
         # the input lcores may not be sorted
         self._lcore_list.sort()
-        self._lcore_str = (
-            f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
-        )
+        self._lcore_str = f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
 
     @property
     def lcore_list(self) -> list[int]:
@@ -70,15 +68,11 @@ def _get_consecutive_lcores_range(self, lcore_ids_list: list[int]) -> list[str]:
                 segment.append(lcore_id)
             else:
                 formatted_core_list.append(
-                    f"{segment[0]}-{segment[-1]}"
-                    if len(segment) > 1
-                    else f"{segment[0]}"
+                    f"{segment[0]}-{segment[-1]}" if len(segment) > 1 else f"{segment[0]}"
                 )
                 current_core_index = lcore_ids_list.index(lcore_id)
                 formatted_core_list.extend(
-                    self._get_consecutive_lcores_range(
-                        lcore_ids_list[current_core_index:]
-                    )
+                    self._get_consecutive_lcores_range(lcore_ids_list[current_core_index:])
                 )
                 segment.clear()
                 break
@@ -125,9 +119,7 @@ def __init__(
         self._filter_specifier = filter_specifier
 
         # sorting by core is needed in case hyperthreading is enabled
-        self._lcores_to_filter = sorted(
-            lcore_list, key=lambda x: x.core, reverse=not ascending
-        )
+        self._lcores_to_filter = sorted(lcore_list, key=lambda x: x.core, reverse=not ascending)
         self.filter()
 
     @abstractmethod
@@ -220,9 +212,7 @@ def _filter_cores_from_socket(
                 else:
                     # we have enough lcores per this core
                     continue
-            elif self._filter_specifier.cores_per_socket > len(
-                lcore_count_per_core_map
-            ):
+            elif self._filter_specifier.cores_per_socket > len(lcore_count_per_core_map):
                 # only add cores if we need more
                 lcore_count_per_core_map[lcore.core] = 1
                 filtered_lcores.append(lcore)
dts/framework/testbed_model/node.py +2 -6
index fc01e0bf8e..ef700d8114 100644
@@ -103,18 +103,14 @@ def _tear_down_execution(self) -> None:
         is not decorated so that the derived class doesn't have to use the decorator.
         """
 
-    def set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Perform the build target setup that will be done for each build target
         tested on this node.
         """
         self._set_up_build_target(build_target_config)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         This method exists to be optionally overwritten by derived classes and
         is not decorated so that the derived class doesn't have to use the decorator.
dts/framework/testbed_model/scapy.py +5 -14
index af0d4dbb25..9083e92b3d 100644
@@ -96,9 +96,7 @@ def scapy_send_packets_and_capture(
     return [scapy_packet.build() for scapy_packet in sniffer.stop(join=True)]
 
 
-def scapy_send_packets(
-    xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str
-) -> None:
+def scapy_send_packets(xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str) -> None:
     """RPC function to send packets.
 
     The function is meant to be executed on the remote TG node.
@@ -197,9 +195,7 @@ class ScapyTrafficGenerator(CapturingTrafficGenerator):
     def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._config = config
         self._tg_node = tg_node
-        self._logger = getLogger(
-            f"{self._tg_node.name} {self._config.traffic_generator_type}"
-        )
+        self._logger = getLogger(f"{self._tg_node.name} {self._config.traffic_generator_type}")
 
         assert (
             self._tg_node.config.os == OS.linux
@@ -218,9 +214,7 @@ def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._start_xmlrpc_server_in_remote_python(xmlrpc_server_listen_port)
 
         # connect to the server
-        server_url = (
-            f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
-        )
+        server_url = f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
         self.rpc_server_proxy = xmlrpc.client.ServerProxy(
             server_url, allow_none=True, verbose=SETTINGS.verbose
         )
@@ -240,17 +234,14 @@ def _start_xmlrpc_server_in_remote_python(self, listen_port: int):
         src = inspect.getsource(QuittableXMLRPCServer)
         # Lines with only whitespace break the repl if in the middle of a function
         # or class, so strip all lines containing only whitespace
-        src = "\n".join(
-            [line for line in src.splitlines() if not line.isspace() and line != ""]
-        )
+        src = "\n".join([line for line in src.splitlines() if not line.isspace() and line != ""])
 
         spacing = "\n" * 4
 
         # execute it in the python terminal
         self.session.send_command(spacing + src + spacing)
         self.session.send_command(
-            f"server = QuittableXMLRPCServer(('0.0.0.0', {listen_port}));"
-            f"server.serve_forever()",
+            f"server = QuittableXMLRPCServer(('0.0.0.0', {listen_port}));server.serve_forever()",
             "XMLRPC OK",
         )
 
dts/framework/testbed_model/sut_node.py +11 -29
index 202aebfd06..d5d8905be7 100644
@@ -129,9 +129,7 @@ def remote_dpdk_build_dir(self) -> PurePath:
     @property
     def dpdk_version(self) -> str:
         if self._dpdk_version is None:
-            self._dpdk_version = self.main_session.get_dpdk_version(
-                self._remote_dpdk_dir
-            )
+            self._dpdk_version = self.main_session.get_dpdk_version(self._remote_dpdk_dir)
         return self._dpdk_version
 
     @property
@@ -149,8 +147,7 @@ def compiler_version(self) -> str:
                 )
             else:
                 self._logger.warning(
-                    "Failed to get compiler version because"
-                    "_build_target_config is None."
+                    "Failed to get compiler version because _build_target_config is None."
                 )
                 return ""
         return self._compiler_version
@@ -163,9 +160,7 @@ def get_build_target_info(self) -> BuildTargetInfo:
     def _guess_dpdk_remote_dir(self) -> PurePath:
         return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Setup DPDK on the SUT node.
         """
@@ -177,23 +172,18 @@ def _set_up_build_target(
         self._copy_dpdk_tarball()
         self._build_dpdk()
 
-    def _configure_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _configure_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Populate common environment variables and set build target config.
         """
         self._env_vars = {}
         self._build_target_config = build_target_config
-        self._env_vars.update(
-            self.main_session.get_dpdk_build_env_vars(build_target_config.arch)
-        )
+        self._env_vars.update(self.main_session.get_dpdk_build_env_vars(build_target_config.arch))
         self._env_vars["CC"] = build_target_config.compiler.name
         if build_target_config.compiler_wrapper:
             self._env_vars["CC"] = (
-                f"'{build_target_config.compiler_wrapper} "
-                f"{build_target_config.compiler.name}'"
-            )
+                f"'{build_target_config.compiler_wrapper} {build_target_config.compiler.name}'"
+            )  # fmt: skip
 
     @Node.skip_setup
     def _copy_dpdk_tarball(self) -> None:
@@ -224,9 +214,7 @@ def _copy_dpdk_tarball(self) -> None:
         self.main_session.remove_remote_dir(self._remote_dpdk_dir)
 
         # then extract to remote path
-        self.main_session.extract_remote_tarball(
-            remote_tarball_path, self._remote_dpdk_dir
-        )
+        self.main_session.extract_remote_tarball(remote_tarball_path, self._remote_dpdk_dir)
 
     @Node.skip_setup
     def _build_dpdk(self) -> None:
@@ -263,9 +251,7 @@ def build_dpdk_app(self, app_name: str, **meson_dpdk_args: str | bool) -> PurePa
         )
 
         if app_name == "all":
-            return self.main_session.join_remote_path(
-                self.remote_dpdk_build_dir, "examples"
-            )
+            return self.main_session.join_remote_path(self.remote_dpdk_build_dir, "examples")
         return self.main_session.join_remote_path(
             self.remote_dpdk_build_dir, "examples", f"dpdk-{app_name}"
         )
@@ -319,9 +305,7 @@ def create_eal_parameters(
                 '-c 0xf -a 0000:88:00.0 --file-prefix=dpdk_1112_20190809143420';
         """
 
-        lcore_list = LogicalCoreList(
-            self.filter_lcores(lcore_filter_specifier, ascending_cores)
-        )
+        lcore_list = LogicalCoreList(self.filter_lcores(lcore_filter_specifier, ascending_cores))
 
         if append_prefix_timestamp:
             prefix = f"{prefix}_{self._dpdk_timestamp}"
@@ -386,6 +370,4 @@ def create_interactive_shell(
                 self.remote_dpdk_build_dir, shell_cls.path
             )
 
-        return super().create_interactive_shell(
-            shell_cls, timeout, privileged, str(eal_parameters)
-        )
+        return super().create_interactive_shell(shell_cls, timeout, privileged, str(eal_parameters))
dts/framework/testbed_model/tg_node.py +2 -5
index 27025cfa31..79a55663b5 100644
@@ -45,9 +45,7 @@ class TGNode(Node):
 
     def __init__(self, node_config: TGNodeConfiguration):
         super(TGNode, self).__init__(node_config)
-        self.traffic_generator = create_traffic_generator(
-            self, node_config.traffic_generator
-        )
+        self.traffic_generator = create_traffic_generator(self, node_config.traffic_generator)
         self._logger.info(f"Created node: {self.name}")
 
     def send_packet_and_capture(
@@ -94,6 +92,5 @@ def create_traffic_generator(
             return ScapyTrafficGenerator(tg_node, traffic_generator_config)
         case _:
             raise ConfigurationError(
-                "Unknown traffic generator: "
-                f"{traffic_generator_config.traffic_generator_type}"
+                f"Unknown traffic generator: {traffic_generator_config.traffic_generator_type}"
             )
dts/framework/utils.py +5 -15
index d27c2c5b5f..d098d364ff 100644
@@ -19,9 +19,7 @@
 
 class StrEnum(Enum):
     @staticmethod
-    def _generate_next_value_(
-        name: str, start: int, count: int, last_values: object
-    ) -> str:
+    def _generate_next_value_(name: str, start: int, count: int, last_values: object) -> str:
         return name
 
     def __str__(self) -> str:
@@ -32,9 +30,7 @@ def __str__(self) -> str:
 
 
 def check_dts_python_version() -> None:
-    if sys.version_info.major < 3 or (
-        sys.version_info.major == 3 and sys.version_info.minor < 10
-    ):
+    if sys.version_info.major < 3 or (sys.version_info.major == 3 and sys.version_info.minor < 10):
         print(
             RED(
                 (
@@ -60,9 +56,7 @@ def expand_range(range_str: str) -> list[int]:
         range_boundaries = range_str.split("-")
         # will throw an exception when items in range_boundaries can't be converted,
         # serving as type check
-        expanded_range.extend(
-            range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1)
-        )
+        expanded_range.extend(range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1))
 
     return expanded_range
 
@@ -71,9 +65,7 @@ def get_packet_summaries(packets: list[Packet]):
     if len(packets) == 1:
         packet_summaries = packets[0].summary()
     else:
-        packet_summaries = json.dumps(
-            list(map(lambda pkt: pkt.summary(), packets)), indent=4
-        )
+        packet_summaries = json.dumps(list(map(lambda pkt: pkt.summary(), packets)), indent=4)
     return f"Packet contents: \n{packet_summaries}"
 
 
@@ -94,9 +86,7 @@ class MesonArgs(object):
     _default_library: str
 
     def __init__(self, default_library: str | None = None, **dpdk_args: str | bool):
-        self._default_library = (
-            f"--default-library={default_library}" if default_library else ""
-        )
+        self._default_library = f"--default-library={default_library}" if default_library else ""
         self._dpdk_args = " ".join(
             (
                 f"-D{dpdk_arg_name}={dpdk_arg_value}"
dts/tests/TestSuite_hello_world.py +1 -3
index 7e3d95c0cf..768ba1cfa8 100644
@@ -34,9 +34,7 @@ def test_hello_world_single_core(self) -> None:
         # get the first usable core
         lcore_amount = LogicalCoreCount(1, 1, 1)
         lcores = LogicalCoreCountFilter(self.sut_node.lcores, lcore_amount).filter()
-        eal_para = self.sut_node.create_eal_parameters(
-            lcore_filter_specifier=lcore_amount
-        )
+        eal_para = self.sut_node.create_eal_parameters(lcore_filter_specifier=lcore_amount)
         result = self.sut_node.run_dpdk_app(self.app_helloworld_path, eal_para)
         self.verify(
             f"hello from core {int(lcores[0])}" in result.stdout,
dts/tests/TestSuite_smoke_tests.py +3 -8
index 4a269df75b..670053c6a5 100644
@@ -45,13 +45,10 @@ def test_driver_tests(self) -> None:
         for dev in self.sut_node.virtual_devices:
             vdev_args += f"--vdev {dev} "
         vdev_args = vdev_args[:-1]
-        driver_tests_command = (
-            f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
-        )
+        driver_tests_command = f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
         if vdev_args:
             self._logger.info(
-                "Running driver tests with the following virtual "
-                f"devices: {vdev_args}"
+                f"Running driver tests with the following virtual devices: {vdev_args}"
             )
             driver_tests_command += f' --test-args "{vdev_args}"'
 
@@ -67,9 +64,7 @@ def test_devices_listed_in_testpmd(self) -> None:
         Test:
             Uses testpmd driver to verify that devices have been found by testpmd.
         """
-        testpmd_driver = self.sut_node.create_interactive_shell(
-            TestPmdShell, privileged=True
-        )
+        testpmd_driver = self.sut_node.create_interactive_shell(TestPmdShell, privileged=True)
         dev_list = [str(x) for x in testpmd_driver.get_devices()]
         for nic in self.nics_in_node:
             self.verify(
Signature · 1 line
2.34.1
#23 lore raw

PATCH v4 1/2 doc: increase python max line length to 100

In reply to Juraj Linkeš

Unify with C recommendations which allow line length of up to 100 characters.

---
 .editorconfig                            | 2 +-
 doc/doc_build/meson-private/meson.lock   | 0
 doc/guides/contributing/coding_style.rst | 1 +
 dts/pyproject.toml                       | 4 ++--
 4 files changed, 4 insertions(+), 3 deletions(-)
 create mode 100644 doc/doc_build/meson-private/meson.lock
.editorconfig +1 -1
index ab41c95085..1e7d74213f 100644
@@ -16,7 +16,7 @@ max_line_length = 100
 [*.py]
 indent_style = space
 indent_size = 4
-max_line_length = 79
+max_line_length = 100
 
 [meson.build]
 indent_style = space
doc/doc_build/meson-private/meson.lock new file +0 -0
new file mode 100644
index 0000000000..e69de29bb2
doc/guides/contributing/coding_style.rst +1 -0
index 648849899d..1ebc79ca3c 100644
@@ -880,6 +880,7 @@ All Python code should be compliant with
 `PEP8 (Style Guide for Python Code) <https://www.python.org/dev/peps/pep-0008/>`_.
 
 The ``pep8`` tool can be used for testing compliance with the guidelines.
+Note that line lengths are acceptable up to 100 characters, which is in line with C recommendations.
 
 Integrating with the Build System
 ---------------------------------
dts/pyproject.toml +2 -2
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
 [tool.pylama]
 linters = "mccabe,pycodestyle,pyflakes"
 format = "pylint"
-max_line_length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+max_line_length = 100
 
 [tool.mypy]
 python_version = "3.10"
@@ -55,4 +55,4 @@ profile = "black"
 [tool.black]
 target-version = ['py310']
 include = '\.pyi?$'
-line-length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length = 100
Signature · 1 line
2.34.1
#24 lore raw

PATCH v4 2/2 dts: reformat to 100 line length

Reformat to 100 from the previous 88 to unify with C recommendations.

---
 dts/framework/config/__init__.py              | 20 ++-----
 dts/framework/dts.py                          | 15 ++---
 dts/framework/exception.py                    |  5 +-
 dts/framework/remote_session/__init__.py      |  4 +-
 dts/framework/remote_session/linux_session.py | 39 ++++---------
 dts/framework/remote_session/posix_session.py | 30 +++-------
 .../remote/interactive_remote_session.py      |  7 +--
 .../remote/interactive_shell.py               |  4 +-
 .../remote_session/remote/remote_session.py   |  8 +--
 .../remote_session/remote/ssh_session.py      | 16 ++----
 .../remote_session/remote/testpmd_shell.py    |  8 +--
 dts/framework/settings.py                     | 15 ++---
 dts/framework/test_result.py                  | 16 ++----
 dts/framework/test_suite.py                   | 57 +++++--------------
 .../capturing_traffic_generator.py            |  7 +--
 dts/framework/testbed_model/hw/cpu.py         | 20 ++-----
 dts/framework/testbed_model/node.py           |  8 +--
 dts/framework/testbed_model/scapy.py          | 19 ++-----
 dts/framework/testbed_model/sut_node.py       | 40 ++++---------
 dts/framework/testbed_model/tg_node.py        |  7 +--
 dts/framework/utils.py                        | 20 ++-----
 dts/tests/TestSuite_hello_world.py            |  4 +-
 dts/tests/TestSuite_smoke_tests.py            | 11 +---
 23 files changed, 99 insertions(+), 281 deletions(-)
dts/framework/config/__init__.py +5 -15
index cb7e00ba34..9b32cf0532 100644
@@ -140,9 +140,7 @@ def from_dict(d: dict) -> Union["SutNodeConfiguration", "TGNodeConfiguration"]:
 
         if "traffic_generator" in d:
             return TGNodeConfiguration(
-                traffic_generator=TrafficGeneratorConfig.from_dict(
-                    d["traffic_generator"]
-                ),
+                traffic_generator=TrafficGeneratorConfig.from_dict(d["traffic_generator"]),
                 **common_config,
             )
         else:
@@ -249,9 +247,7 @@ def from_dict(
         build_targets: list[BuildTargetConfiguration] = list(
             map(BuildTargetConfiguration.from_dict, d["build_targets"])
         )
-        test_suites: list[TestSuiteConfig] = list(
-            map(TestSuiteConfig.from_dict, d["test_suites"])
-        )
+        test_suites: list[TestSuiteConfig] = list(map(TestSuiteConfig.from_dict, d["test_suites"]))
         sut_name = d["system_under_test_node"]["node_name"]
         skip_smoke_tests = d.get("skip_smoke_tests", False)
         assert sut_name in node_map, f"Unknown SUT {sut_name} in execution {d}"
@@ -268,9 +264,7 @@ def from_dict(
         ), f"Invalid TG configuration {traffic_generator_node}"
 
         vdevs = (
-            d["system_under_test_node"]["vdevs"]
-            if "vdevs" in d["system_under_test_node"]
-            else []
+            d["system_under_test_node"]["vdevs"] if "vdevs" in d["system_under_test_node"] else []
         )
         return ExecutionConfiguration(
             build_targets=build_targets,
@@ -299,9 +293,7 @@ def from_dict(d: dict) -> "Configuration":
         assert len(nodes) == len(node_map), "Duplicate node names are not allowed"
 
         executions: list[ExecutionConfiguration] = list(
-            map(
-                ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d]
-            )
+            map(ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d])
         )
 
         return Configuration(executions=executions)
@@ -315,9 +307,7 @@ def load_config() -> Configuration:
     with open(SETTINGS.config_file_path, "r") as f:
         config_data = yaml.safe_load(f)
 
-    schema_path = os.path.join(
-        pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json"
-    )
+    schema_path = os.path.join(pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json")
 
     with open(schema_path, "r") as f:
         schema = json.load(f)
dts/framework/dts.py +4 -11
index f773f0c38d..25d6942d81 100644
@@ -92,9 +92,7 @@ def _run_execution(
     Run the given execution. This involves running the execution setup as well as
     running all build targets in the given execution.
     """
-    dts_logger.info(
-        f"Running execution with SUT '{execution.system_under_test_node.name}'."
-    )
+    dts_logger.info(f"Running execution with SUT '{execution.system_under_test_node.name}'.")
     execution_result = result.add_execution(sut_node.config)
     execution_result.add_sut_info(sut_node.node_info)
 
@@ -107,9 +105,7 @@ def _run_execution(
 
     else:
         for build_target in execution.build_targets:
-            _run_build_target(
-                sut_node, tg_node, build_target, execution, execution_result
-            )
+            _run_build_target(sut_node, tg_node, build_target, execution, execution_result)
 
     finally:
         try:
@@ -170,13 +166,10 @@ def _run_all_suites(
         execution.test_suites[:0] = [TestSuiteConfig.from_dict("smoke_tests")]
     for test_suite_config in execution.test_suites:
         try:
-            _run_single_suite(
-                sut_node, tg_node, execution, build_target_result, test_suite_config
-            )
+            _run_single_suite(sut_node, tg_node, execution, build_target_result, test_suite_config)
         except BlockingTestSuiteError as e:
             dts_logger.exception(
-                f"An error occurred within {test_suite_config.test_suite}. "
-                "Skipping build target..."
+                f"An error occurred within {test_suite_config.test_suite}. Skipping build target."
             )
             result.add_error(e)
             end_build_target = True
dts/framework/exception.py +1 -4
index 001a5a5496..b362e42924 100644
@@ -116,10 +116,7 @@ def __init__(self, command: str, command_return_code: int):
         self.command_return_code = command_return_code
 
     def __str__(self) -> str:
-        return (
-            f"Command {self.command} returned a non-zero exit code: "
-            f"{self.command_return_code}"
-        )
+        return f"Command {self.command} returned a non-zero exit code: {self.command_return_code}"
 
 
 class RemoteDirectoryExistsError(DTSError):
dts/framework/remote_session/__init__.py +1 -3
index 00b6d1f03a..6124417bd7 100644
@@ -30,9 +30,7 @@
 )
 
 
-def create_session(
-    node_config: NodeConfiguration, name: str, logger: DTSLOG
-) -> OSSession:
+def create_session(node_config: NodeConfiguration, name: str, logger: DTSLOG) -> OSSession:
     match node_config.os:
         case OS.linux:
             return LinuxSession(node_config, name, logger)
dts/framework/remote_session/linux_session.py +10 -29
index a3f1a6bf3b..fd877fbfae 100644
@@ -82,9 +82,7 @@ def setup_hugepages(self, hugepage_amount: int, force_first_numa: bool) -> None:
         self._mount_huge_pages()
 
     def _get_hugepage_size(self) -> int:
-        hugepage_size = self.send_command(
-            "awk '/Hugepagesize/ {print $2}' /proc/meminfo"
-        ).stdout
+        hugepage_size = self.send_command("awk '/Hugepagesize/ {print $2}' /proc/meminfo").stdout
         return int(hugepage_size)
 
     def _get_hugepages_total(self) -> int:
@@ -120,13 +118,9 @@ def _supports_numa(self) -> bool:
         # there's no reason to do any numa specific configuration)
         return len(self._numa_nodes) > 1
 
-    def _configure_huge_pages(
-        self, amount: int, size: int, force_first_numa: bool
-    ) -> None:
+    def _configure_huge_pages(self, amount: int, size: int, force_first_numa: bool) -> None:
         self._logger.info("Configuring Hugepages.")
-        hugepage_config_path = (
-            f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
-        )
+        hugepage_config_path = f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
         if force_first_numa and self._supports_numa():
             # clear non-numa hugepages
             self.send_command(f"echo 0 | tee {hugepage_config_path}", privileged=True)
@@ -135,24 +129,18 @@ def _configure_huge_pages(
                 f"/hugepages-{size}kB/nr_hugepages"
             )
 
-        self.send_command(
-            f"echo {amount} | tee {hugepage_config_path}", privileged=True
-        )
+        self.send_command(f"echo {amount} | tee {hugepage_config_path}", privileged=True)
 
     def update_ports(self, ports: list[Port]) -> None:
         self._logger.debug("Gathering port info.")
         for port in ports:
-            assert (
-                port.node == self.name
-            ), "Attempted to gather port info on the wrong node"
+            assert port.node == self.name, "Attempted to gather port info on the wrong node"
 
         port_info_list = self._get_lshw_info()
         for port in ports:
             for port_info in port_info_list:
                 if f"pci@{port.pci}" == port_info.get("businfo"):
-                    self._update_port_attr(
-                        port, port_info.get("logicalname"), "logical_name"
-                    )
+                    self._update_port_attr(port, port_info.get("logicalname"), "logical_name")
                     self._update_port_attr(port, port_info.get("serial"), "mac_address")
                     port_info_list.remove(port_info)
                     break
@@ -163,25 +151,18 @@ def _get_lshw_info(self) -> list[LshwOutput]:
         output = self.send_command("lshw -quiet -json -C network", verify=True)
         return json.loads(output.stdout)
 
-    def _update_port_attr(
-        self, port: Port, attr_value: str | None, attr_name: str
-    ) -> None:
+    def _update_port_attr(self, port: Port, attr_value: str | None, attr_name: str) -> None:
         if attr_value:
             setattr(port, attr_name, attr_value)
-            self._logger.debug(
-                f"Found '{attr_name}' of port {port.pci}: '{attr_value}'."
-            )
+            self._logger.debug(f"Found '{attr_name}' of port {port.pci}: '{attr_value}'.")
         else:
             self._logger.warning(
-                f"Attempted to get '{attr_name}' of port {port.pci}, "
-                f"but it doesn't exist."
+                f"Attempted to get '{attr_name}' of port {port.pci}, but it doesn't exist."
             )
 
     def configure_port_state(self, port: Port, enable: bool) -> None:
         state = "up" if enable else "down"
-        self.send_command(
-            f"ip link set dev {port.logical_name} {state}", privileged=True
-        )
+        self.send_command(f"ip link set dev {port.logical_name} {state}", privileged=True)
 
     def configure_port_ip_address(
         self,
dts/framework/remote_session/posix_session.py +8 -22
index 5da0516e05..a29e2e8280 100644
@@ -94,8 +94,7 @@ def extract_remote_tarball(
         expected_dir: str | PurePath | None = None,
     ) -> None:
         self.send_command(
-            f"tar xfm {remote_tarball_path} "
-            f"-C {PurePosixPath(remote_tarball_path).parent}",
+            f"tar xfm {remote_tarball_path} -C {PurePosixPath(remote_tarball_path).parent}",
             60,
         )
         if expected_dir:
@@ -125,8 +124,7 @@ def build_dpdk(
                 self._logger.info("Configuring DPDK build from scratch.")
                 self.remove_remote_dir(remote_dpdk_build_dir)
                 self.send_command(
-                    f"meson setup "
-                    f"{meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
+                    f"meson setup {meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
                     timeout,
                     verify=True,
                     env=env_vars,
@@ -140,9 +138,7 @@ def build_dpdk(
             raise DPDKBuildError(f"DPDK build failed when doing '{e.command}'.")
 
     def get_dpdk_version(self, build_dir: str | PurePath) -> str:
-        out = self.send_command(
-            f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True
-        )
+        out = self.send_command(f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True)
         return out.stdout
 
     def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
@@ -156,9 +152,7 @@ def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
             self._check_dpdk_hugepages(dpdk_runtime_dirs)
             self._remove_dpdk_runtime_dirs(dpdk_runtime_dirs)
 
-    def _get_dpdk_runtime_dirs(
-        self, dpdk_prefix_list: Iterable[str]
-    ) -> list[PurePosixPath]:
+    def _get_dpdk_runtime_dirs(self, dpdk_prefix_list: Iterable[str]) -> list[PurePosixPath]:
         prefix = PurePosixPath("/var", "run", "dpdk")
         if not dpdk_prefix_list:
             remote_prefixes = self._list_remote_dirs(prefix)
@@ -174,9 +168,7 @@ def _list_remote_dirs(self, remote_path: str | PurePath) -> list[str] | None:
         Return a list of directories of the remote_dir.
         If remote_path doesn't exist, return None.
         """
-        out = self.send_command(
-            f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'"
-        ).stdout
+        out = self.send_command(f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'").stdout
         if "No such file or directory" in out:
             return None
         else:
@@ -200,9 +192,7 @@ def _remote_files_exists(self, remote_path: PurePath) -> bool:
         result = self.send_command(f"test -e {remote_path}")
         return not result.return_code
 
-    def _check_dpdk_hugepages(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _check_dpdk_hugepages(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             hugepage_info = PurePosixPath(dpdk_runtime_dir, "hugepage_info")
             if self._remote_files_exists(hugepage_info):
@@ -213,9 +203,7 @@ def _check_dpdk_hugepages(
                     self._logger.warning(out)
                     self._logger.warning("*******************************************")
 
-    def _remove_dpdk_runtime_dirs(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _remove_dpdk_runtime_dirs(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             self.remove_remote_dir(dpdk_runtime_dir)
 
@@ -245,6 +233,4 @@ def get_node_info(self) -> NodeInfo:
             SETTINGS.timeout,
         ).stdout.split("\n")
         kernel_version = self.send_command("uname -r", SETTINGS.timeout).stdout
-        return NodeInfo(
-            os_release_info[0].strip(), os_release_info[1].strip(), kernel_version
-        )
+        return NodeInfo(os_release_info[0].strip(), os_release_info[1].strip(), kernel_version)
dts/framework/remote_session/remote/interactive_remote_session.py +2 -5
index 9085a668e8..098ded1bb0 100644
@@ -73,9 +73,7 @@ def __init__(self, node_config: NodeConfiguration, _logger: DTSLOG) -> None:
             f"Initializing interactive connection for {self.username}@{self.hostname}"
         )
         self._connect()
-        self._logger.info(
-            f"Interactive connection successful for {self.username}@{self.hostname}"
-        )
+        self._logger.info(f"Interactive connection successful for {self.username}@{self.hostname}")
 
     def _connect(self) -> None:
         """Establish a connection to the node.
@@ -108,8 +106,7 @@ def _connect(self) -> None:
                 self._logger.debug(traceback.format_exc())
                 self._logger.warning(e)
                 self._logger.info(
-                    "Retrying interactive session connection: "
-                    f"retry number {retry_attempt +1}"
+                    f"Retrying interactive session connection: retry number {retry_attempt +1}"
                 )
             else:
                 break
dts/framework/remote_session/remote/interactive_shell.py +1 -3
index c24376b2a8..4db19fb9b3 100644
@@ -85,9 +85,7 @@ def __init__(
         self._app_args = app_args
         self._start_application(get_privileged_command)
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """Starts a new interactive application based on the path to the app.
 
         This method is often overridden by subclasses as their process for
dts/framework/remote_session/remote/remote_session.py +2 -6
index 0647d93de4..719f7d1ef7 100644
@@ -96,9 +96,7 @@ def send_command(
         If verify is True, check the return code of the executed command
         and raise a RemoteCommandExecutionError if the command failed.
         """
-        self._logger.info(
-            f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else "")
-        )
+        self._logger.info(f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else ""))
         result = self._send_command(command, timeout, env)
         if verify and result.return_code:
             self._logger.debug(
@@ -112,9 +110,7 @@ def send_command(
         return result
 
     @abstractmethod
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """
         Use the underlying protocol to execute the command using optional env vars
         and return CommandResult.
dts/framework/remote_session/remote/ssh_session.py +4 -12
index 8d127f1601..1a7ee649ab 100644
@@ -80,9 +80,7 @@ def _connect(self) -> None:
                 if error not in errors:
                     errors.append(error)
 
-                self._logger.info(
-                    f"Retrying connection: retry number {retry_attempt + 1}."
-                )
+                self._logger.info(f"Retrying connection: retry number {retry_attempt + 1}.")
 
             else:
                 break
@@ -92,9 +90,7 @@ def _connect(self) -> None:
     def is_alive(self) -> bool:
         return self.session.is_connected
 
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """Send a command and return the result of the execution.
 
         Args:
@@ -107,9 +103,7 @@ def _send_command(
             SSHTimeoutError: The command execution timed out.
         """
         try:
-            output = self.session.run(
-                command, env=env, warn=True, hide=True, timeout=timeout
-            )
+            output = self.session.run(command, env=env, warn=True, hide=True, timeout=timeout)
 
         except (UnexpectedExit, ThreadException) as e:
             self._logger.exception(e)
@@ -119,9 +113,7 @@ def _send_command(
             self._logger.exception(e)
             raise SSHTimeoutError(command, e.result.stderr) from e
 
-        return CommandResult(
-            self.name, command, output.stdout, output.stderr, output.return_code
-        )
+        return CommandResult(self.name, command, output.stdout, output.stderr, output.return_code)
 
     def copy_from(
         self,
dts/framework/remote_session/remote/testpmd_shell.py +2 -6
index 1455b5a199..08ac311016 100644
@@ -21,13 +21,9 @@ class TestPmdShell(InteractiveShell):
     path: PurePath = PurePath("app", "dpdk-testpmd")
     dpdk_app: bool = True
     _default_prompt: str = "testpmd>"
-    _command_extra_chars: str = (
-        "\n"  # We want to append an extra newline to every command
-    )
+    _command_extra_chars: str = "\n"  # We want to append an extra newline to every command
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """See "_start_application" in InteractiveShell."""
         self._app_args += " -- -i"
         super()._start_application(get_privileged_command)
dts/framework/settings.py +5 -10
index cfa39d011b..974793a11a 100644
@@ -72,9 +72,8 @@ class _Settings:
 
 def _get_parser() -> argparse.ArgumentParser:
     parser = argparse.ArgumentParser(
-        description="Run DPDK test suites. All options may be specified with "
-        "the environment variables provided in brackets. "
-        "Command line arguments have higher priority.",
+        description="Run DPDK test suites. All options may be specified with the environment "
+        "variables provided in brackets. Command line arguments have higher priority.",
         formatter_class=argparse.ArgumentDefaultsHelpFormatter,
     )
 
@@ -82,8 +81,7 @@ def _get_parser() -> argparse.ArgumentParser:
         "--config-file",
         action=_env_arg("DTS_CFG_FILE"),
         default="conf.yaml",
-        help="[DTS_CFG_FILE] configuration file that describes the test cases, SUTs "
-        "and targets.",
+        help="[DTS_CFG_FILE] configuration file that describes the test cases, SUTs and targets.",
     )
 
     parser.add_argument(
@@ -100,8 +98,7 @@ def _get_parser() -> argparse.ArgumentParser:
         action=_env_arg("DTS_TIMEOUT"),
         default=15,
         type=float,
-        help="[DTS_TIMEOUT] The default timeout for all DTS operations except for "
-        "compiling DPDK.",
+        help="[DTS_TIMEOUT] The default timeout for all DTS operations except for compiling DPDK.",
     )
 
     parser.add_argument(
@@ -170,9 +167,7 @@ def _get_settings() -> _Settings:
         timeout=parsed_args.timeout,
         verbose=(parsed_args.verbose == "Y"),
         skip_setup=(parsed_args.skip_setup == "Y"),
-        dpdk_tarball_path=Path(
-            DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir)
-        )
+        dpdk_tarball_path=Path(DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir))
         if not os.path.exists(parsed_args.tarball)
         else Path(parsed_args.tarball),
         compile_timeout=parsed_args.compile_timeout,
dts/framework/test_result.py +4 -12
index f0fbe80f6f..4c2e7e2418 100644
@@ -83,9 +83,7 @@ def __iadd__(self, other: Result) -> "Statistics":
         """
         self[other.name] += 1
         self["PASS RATE"] = (
-            float(self[Result.PASS.name])
-            * 100
-            / sum(self[result.name] for result in Result)
+            float(self[Result.PASS.name]) * 100 / sum(self[result.name] for result in Result)
         )
         return self
 
@@ -135,9 +133,7 @@ def _get_setup_teardown_errors(self) -> list[Exception]:
 
     def _get_inner_errors(self) -> list[Exception]:
         return [
-            error
-            for inner_result in self._inner_results
-            for error in inner_result.get_errors()
+            error for inner_result in self._inner_results for error in inner_result.get_errors()
         ]
 
     def get_errors(self) -> list[Exception]:
@@ -174,9 +170,7 @@ def add_stats(self, statistics: Statistics) -> None:
         statistics += self.result
 
     def __bool__(self) -> bool:
-        return (
-            bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
-        )
+        return bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
 
 
 class TestSuiteResult(BaseResult):
@@ -247,9 +241,7 @@ def __init__(self, sut_node: NodeConfiguration):
         super(ExecutionResult, self).__init__()
         self.sut_node = sut_node
 
-    def add_build_target(
-        self, build_target: BuildTargetConfiguration
-    ) -> BuildTargetResult:
+    def add_build_target(self, build_target: BuildTargetConfiguration) -> BuildTargetResult:
         build_target_result = BuildTargetResult(build_target)
         self._inner_results.append(build_target_result)
         return build_target_result
dts/framework/test_suite.py +14 -43

121 lines not on this page · raw message

dts/framework/testbed_model/capturing_traffic_generator.py +2 -5
index ab98987f8e..e6512061d7 100644
@@ -100,8 +100,7 @@ def send_packets_and_capture(
         """
         self._logger.debug(get_packet_summaries(packets))
         self._logger.debug(
-            f"Sending packet on {send_port.logical_name}, "
-            f"receiving on {receive_port.logical_name}."
+            f"Sending packet on {send_port.logical_name}, receiving on {receive_port.logical_name}."
         )
         received_packets = self._send_packets_and_capture(
             packets,
@@ -110,9 +109,7 @@ def send_packets_and_capture(
             duration,
         )
 
-        self._logger.debug(
-            f"Received packets: {get_packet_summaries(received_packets)}"
-        )
+        self._logger.debug(f"Received packets: {get_packet_summaries(received_packets)}")
         self._write_capture_from_packets(capture_name, received_packets)
         return received_packets
 
dts/framework/testbed_model/hw/cpu.py +5 -15
index d1918a12dc..cbc5fe7fff 100644
@@ -54,9 +54,7 @@ def __init__(self, lcore_list: list[int] | list[str] | list[LogicalCore] | str):
 
         # the input lcores may not be sorted
         self._lcore_list.sort()
-        self._lcore_str = (
-            f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
-        )
+        self._lcore_str = f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
 
     @property
     def lcore_list(self) -> list[int]:
@@ -70,15 +68,11 @@ def _get_consecutive_lcores_range(self, lcore_ids_list: list[int]) -> list[str]:
                 segment.append(lcore_id)
             else:
                 formatted_core_list.append(
-                    f"{segment[0]}-{segment[-1]}"
-                    if len(segment) > 1
-                    else f"{segment[0]}"
+                    f"{segment[0]}-{segment[-1]}" if len(segment) > 1 else f"{segment[0]}"
                 )
                 current_core_index = lcore_ids_list.index(lcore_id)
                 formatted_core_list.extend(
-                    self._get_consecutive_lcores_range(
-                        lcore_ids_list[current_core_index:]
-                    )
+                    self._get_consecutive_lcores_range(lcore_ids_list[current_core_index:])
                 )
                 segment.clear()
                 break
@@ -125,9 +119,7 @@ def __init__(
         self._filter_specifier = filter_specifier
 
         # sorting by core is needed in case hyperthreading is enabled
-        self._lcores_to_filter = sorted(
-            lcore_list, key=lambda x: x.core, reverse=not ascending
-        )
+        self._lcores_to_filter = sorted(lcore_list, key=lambda x: x.core, reverse=not ascending)
         self.filter()
 
     @abstractmethod
@@ -220,9 +212,7 @@ def _filter_cores_from_socket(
                 else:
                     # we have enough lcores per this core
                     continue
-            elif self._filter_specifier.cores_per_socket > len(
-                lcore_count_per_core_map
-            ):
+            elif self._filter_specifier.cores_per_socket > len(lcore_count_per_core_map):
                 # only add cores if we need more
                 lcore_count_per_core_map[lcore.core] = 1
                 filtered_lcores.append(lcore)
dts/framework/testbed_model/node.py +2 -6
index fc01e0bf8e..ef700d8114 100644
@@ -103,18 +103,14 @@ def _tear_down_execution(self) -> None:
         is not decorated so that the derived class doesn't have to use the decorator.
         """
 
-    def set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Perform the build target setup that will be done for each build target
         tested on this node.
         """
         self._set_up_build_target(build_target_config)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         This method exists to be optionally overwritten by derived classes and
         is not decorated so that the derived class doesn't have to use the decorator.
dts/framework/testbed_model/scapy.py +5 -14
index af0d4dbb25..9083e92b3d 100644
@@ -96,9 +96,7 @@ def scapy_send_packets_and_capture(
     return [scapy_packet.build() for scapy_packet in sniffer.stop(join=True)]
 
 
-def scapy_send_packets(
-    xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str
-) -> None:
+def scapy_send_packets(xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str) -> None:
     """RPC function to send packets.
 
     The function is meant to be executed on the remote TG node.
@@ -197,9 +195,7 @@ class ScapyTrafficGenerator(CapturingTrafficGenerator):
     def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._config = config
         self._tg_node = tg_node
-        self._logger = getLogger(
-            f"{self._tg_node.name} {self._config.traffic_generator_type}"
-        )
+        self._logger = getLogger(f"{self._tg_node.name} {self._config.traffic_generator_type}")
 
         assert (
             self._tg_node.config.os == OS.linux
@@ -218,9 +214,7 @@ def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._start_xmlrpc_server_in_remote_python(xmlrpc_server_listen_port)
 
         # connect to the server
-        server_url = (
-            f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
-        )
+        server_url = f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
         self.rpc_server_proxy = xmlrpc.client.ServerProxy(
             server_url, allow_none=True, verbose=SETTINGS.verbose
         )
@@ -240,17 +234,14 @@ def _start_xmlrpc_server_in_remote_python(self, listen_port: int):
         src = inspect.getsource(QuittableXMLRPCServer)
         # Lines with only whitespace break the repl if in the middle of a function
         # or class, so strip all lines containing only whitespace
-        src = "\n".join(
-            [line for line in src.splitlines() if not line.isspace() and line != ""]
-        )
+        src = "\n".join([line for line in src.splitlines() if not line.isspace() and line != ""])
 
         spacing = "\n" * 4
 
         # execute it in the python terminal
         self.session.send_command(spacing + src + spacing)
         self.session.send_command(
-            f"server = QuittableXMLRPCServer(('0.0.0.0', {listen_port}));"
-            f"server.serve_forever()",
+            f"server = QuittableXMLRPCServer(('0.0.0.0', {listen_port}));server.serve_forever()",
             "XMLRPC OK",
         )
 
dts/framework/testbed_model/sut_node.py +11 -29
index 202aebfd06..d5d8905be7 100644
@@ -129,9 +129,7 @@ def remote_dpdk_build_dir(self) -> PurePath:
     @property
     def dpdk_version(self) -> str:
         if self._dpdk_version is None:
-            self._dpdk_version = self.main_session.get_dpdk_version(
-                self._remote_dpdk_dir
-            )
+            self._dpdk_version = self.main_session.get_dpdk_version(self._remote_dpdk_dir)
         return self._dpdk_version
 
     @property
@@ -149,8 +147,7 @@ def compiler_version(self) -> str:
                 )
             else:
                 self._logger.warning(
-                    "Failed to get compiler version because"
-                    "_build_target_config is None."
+                    "Failed to get compiler version because _build_target_config is None."
                 )
                 return ""
         return self._compiler_version
@@ -163,9 +160,7 @@ def get_build_target_info(self) -> BuildTargetInfo:
     def _guess_dpdk_remote_dir(self) -> PurePath:
         return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Setup DPDK on the SUT node.
         """
@@ -177,23 +172,18 @@ def _set_up_build_target(
         self._copy_dpdk_tarball()
         self._build_dpdk()
 
-    def _configure_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _configure_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Populate common environment variables and set build target config.
         """
         self._env_vars = {}
         self._build_target_config = build_target_config
-        self._env_vars.update(
-            self.main_session.get_dpdk_build_env_vars(build_target_config.arch)
-        )
+        self._env_vars.update(self.main_session.get_dpdk_build_env_vars(build_target_config.arch))
         self._env_vars["CC"] = build_target_config.compiler.name
         if build_target_config.compiler_wrapper:
             self._env_vars["CC"] = (
-                f"'{build_target_config.compiler_wrapper} "
-                f"{build_target_config.compiler.name}'"
-            )
+                f"'{build_target_config.compiler_wrapper} {build_target_config.compiler.name}'"
+            )  # fmt: skip
 
     @Node.skip_setup
     def _copy_dpdk_tarball(self) -> None:
@@ -224,9 +214,7 @@ def _copy_dpdk_tarball(self) -> None:
         self.main_session.remove_remote_dir(self._remote_dpdk_dir)
 
         # then extract to remote path
-        self.main_session.extract_remote_tarball(
-            remote_tarball_path, self._remote_dpdk_dir
-        )
+        self.main_session.extract_remote_tarball(remote_tarball_path, self._remote_dpdk_dir)
 
     @Node.skip_setup
     def _build_dpdk(self) -> None:
@@ -263,9 +251,7 @@ def build_dpdk_app(self, app_name: str, **meson_dpdk_args: str | bool) -> PurePa
         )
 
         if app_name == "all":
-            return self.main_session.join_remote_path(
-                self.remote_dpdk_build_dir, "examples"
-            )
+            return self.main_session.join_remote_path(self.remote_dpdk_build_dir, "examples")
         return self.main_session.join_remote_path(
             self.remote_dpdk_build_dir, "examples", f"dpdk-{app_name}"
         )
@@ -319,9 +305,7 @@ def create_eal_parameters(
                 '-c 0xf -a 0000:88:00.0 --file-prefix=dpdk_1112_20190809143420';
         """
 
-        lcore_list = LogicalCoreList(
-            self.filter_lcores(lcore_filter_specifier, ascending_cores)
-        )
+        lcore_list = LogicalCoreList(self.filter_lcores(lcore_filter_specifier, ascending_cores))
 
         if append_prefix_timestamp:
             prefix = f"{prefix}_{self._dpdk_timestamp}"
@@ -386,6 +370,4 @@ def create_interactive_shell(
                 self.remote_dpdk_build_dir, shell_cls.path
             )
 
-        return super().create_interactive_shell(
-            shell_cls, timeout, privileged, str(eal_parameters)
-        )
+        return super().create_interactive_shell(shell_cls, timeout, privileged, str(eal_parameters))
dts/framework/testbed_model/tg_node.py +2 -5
index 27025cfa31..79a55663b5 100644
@@ -45,9 +45,7 @@ class TGNode(Node):
 
     def __init__(self, node_config: TGNodeConfiguration):
         super(TGNode, self).__init__(node_config)
-        self.traffic_generator = create_traffic_generator(
-            self, node_config.traffic_generator
-        )
+        self.traffic_generator = create_traffic_generator(self, node_config.traffic_generator)
         self._logger.info(f"Created node: {self.name}")
 
     def send_packet_and_capture(
@@ -94,6 +92,5 @@ def create_traffic_generator(
             return ScapyTrafficGenerator(tg_node, traffic_generator_config)
         case _:
             raise ConfigurationError(
-                "Unknown traffic generator: "
-                f"{traffic_generator_config.traffic_generator_type}"
+                f"Unknown traffic generator: {traffic_generator_config.traffic_generator_type}"
             )
dts/framework/utils.py +5 -15
index d27c2c5b5f..d098d364ff 100644
@@ -19,9 +19,7 @@
 
 class StrEnum(Enum):
     @staticmethod
-    def _generate_next_value_(
-        name: str, start: int, count: int, last_values: object
-    ) -> str:
+    def _generate_next_value_(name: str, start: int, count: int, last_values: object) -> str:
         return name
 
     def __str__(self) -> str:
@@ -32,9 +30,7 @@ def __str__(self) -> str:
 
 
 def check_dts_python_version() -> None:
-    if sys.version_info.major < 3 or (
-        sys.version_info.major == 3 and sys.version_info.minor < 10
-    ):
+    if sys.version_info.major < 3 or (sys.version_info.major == 3 and sys.version_info.minor < 10):
         print(
             RED(
                 (
@@ -60,9 +56,7 @@ def expand_range(range_str: str) -> list[int]:
         range_boundaries = range_str.split("-")
         # will throw an exception when items in range_boundaries can't be converted,
         # serving as type check
-        expanded_range.extend(
-            range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1)
-        )
+        expanded_range.extend(range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1))
 
     return expanded_range
 
@@ -71,9 +65,7 @@ def get_packet_summaries(packets: list[Packet]):
     if len(packets) == 1:
         packet_summaries = packets[0].summary()
     else:
-        packet_summaries = json.dumps(
-            list(map(lambda pkt: pkt.summary(), packets)), indent=4
-        )
+        packet_summaries = json.dumps(list(map(lambda pkt: pkt.summary(), packets)), indent=4)
     return f"Packet contents: \n{packet_summaries}"
 
 
@@ -94,9 +86,7 @@ class MesonArgs(object):
     _default_library: str
 
     def __init__(self, default_library: str | None = None, **dpdk_args: str | bool):
-        self._default_library = (
-            f"--default-library={default_library}" if default_library else ""
-        )
+        self._default_library = f"--default-library={default_library}" if default_library else ""
         self._dpdk_args = " ".join(
             (
                 f"-D{dpdk_arg_name}={dpdk_arg_value}"
dts/tests/TestSuite_hello_world.py +1 -3
index 7e3d95c0cf..768ba1cfa8 100644
@@ -34,9 +34,7 @@ def test_hello_world_single_core(self) -> None:
         # get the first usable core
         lcore_amount = LogicalCoreCount(1, 1, 1)
         lcores = LogicalCoreCountFilter(self.sut_node.lcores, lcore_amount).filter()
-        eal_para = self.sut_node.create_eal_parameters(
-            lcore_filter_specifier=lcore_amount
-        )
+        eal_para = self.sut_node.create_eal_parameters(lcore_filter_specifier=lcore_amount)
         result = self.sut_node.run_dpdk_app(self.app_helloworld_path, eal_para)
         self.verify(
             f"hello from core {int(lcores[0])}" in result.stdout,
dts/tests/TestSuite_smoke_tests.py +3 -8
index 4a269df75b..670053c6a5 100644
@@ -45,13 +45,10 @@ def test_driver_tests(self) -> None:
         for dev in self.sut_node.virtual_devices:
             vdev_args += f"--vdev {dev} "
         vdev_args = vdev_args[:-1]
-        driver_tests_command = (
-            f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
-        )
+        driver_tests_command = f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
         if vdev_args:
             self._logger.info(
-                "Running driver tests with the following virtual "
-                f"devices: {vdev_args}"
+                f"Running driver tests with the following virtual devices: {vdev_args}"
             )
             driver_tests_command += f' --test-args "{vdev_args}"'
 
@@ -67,9 +64,7 @@ def test_devices_listed_in_testpmd(self) -> None:
         Test:
             Uses testpmd driver to verify that devices have been found by testpmd.
         """
-        testpmd_driver = self.sut_node.create_interactive_shell(
-            TestPmdShell, privileged=True
-        )
+        testpmd_driver = self.sut_node.create_interactive_shell(TestPmdShell, privileged=True)
         dev_list = [str(x) for x in testpmd_driver.get_devices()]
         for nic in self.nics_in_node:
             self.verify(
Signature · 1 line
2.34.1
#25 lore raw

PATCH v5 1/2 doc: increase python max line length to 100

Unify with C recommendations which allow line length of up to 100 characters.

---
 .editorconfig                            | 2 +-
 doc/guides/contributing/coding_style.rst | 1 +
 dts/pyproject.toml                       | 4 ++--
 3 files changed, 4 insertions(+), 3 deletions(-)
.editorconfig +1 -1
index ab41c95085..1e7d74213f 100644
@@ -16,7 +16,7 @@ max_line_length = 100
 [*.py]
 indent_style = space
 indent_size = 4
-max_line_length = 79
+max_line_length = 100
 
 [meson.build]
 indent_style = space
doc/guides/contributing/coding_style.rst +1 -0
index 648849899d..1ebc79ca3c 100644
@@ -880,6 +880,7 @@ All Python code should be compliant with
 `PEP8 (Style Guide for Python Code) <https://www.python.org/dev/peps/pep-0008/>`_.
 
 The ``pep8`` tool can be used for testing compliance with the guidelines.
+Note that line lengths are acceptable up to 100 characters, which is in line with C recommendations.
 
 Integrating with the Build System
 ---------------------------------
dts/pyproject.toml +2 -2
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
 [tool.pylama]
 linters = "mccabe,pycodestyle,pyflakes"
 format = "pylint"
-max_line_length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+max_line_length = 100
 
 [tool.mypy]
 python_version = "3.10"
@@ -55,4 +55,4 @@ profile = "black"
 [tool.black]
 target-version = ['py310']
 include = '\.pyi?$'
-line-length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length = 100
Signature · 1 line
2.34.1
#26 lore raw

PATCH v5 2/2 dts: reformat to 100 line length

Reformat to 100 from the previous 88 to unify with C recommendations.

---
 dts/framework/config/__init__.py              | 20 ++-----
 dts/framework/dts.py                          | 15 ++---
 dts/framework/exception.py                    |  5 +-
 dts/framework/remote_session/__init__.py      |  4 +-
 dts/framework/remote_session/linux_session.py | 39 ++++---------
 dts/framework/remote_session/posix_session.py | 30 +++-------
 .../remote/interactive_remote_session.py      |  7 +--
 .../remote/interactive_shell.py               |  4 +-
 .../remote_session/remote/remote_session.py   |  8 +--
 .../remote_session/remote/ssh_session.py      | 16 ++----
 .../remote_session/remote/testpmd_shell.py    |  8 +--
 dts/framework/settings.py                     | 15 ++---
 dts/framework/test_result.py                  | 16 ++----
 dts/framework/test_suite.py                   | 57 +++++--------------
 .../capturing_traffic_generator.py            |  7 +--
 dts/framework/testbed_model/hw/cpu.py         | 20 ++-----
 dts/framework/testbed_model/node.py           |  8 +--
 dts/framework/testbed_model/scapy.py          | 19 ++-----
 dts/framework/testbed_model/sut_node.py       | 40 ++++---------
 dts/framework/testbed_model/tg_node.py        |  7 +--
 dts/framework/utils.py                        | 20 ++-----
 dts/tests/TestSuite_hello_world.py            |  4 +-
 dts/tests/TestSuite_smoke_tests.py            | 11 +---
 23 files changed, 99 insertions(+), 281 deletions(-)
dts/framework/config/__init__.py +5 -15
index cb7e00ba34..9b32cf0532 100644
@@ -140,9 +140,7 @@ def from_dict(d: dict) -> Union["SutNodeConfiguration", "TGNodeConfiguration"]:
 
         if "traffic_generator" in d:
             return TGNodeConfiguration(
-                traffic_generator=TrafficGeneratorConfig.from_dict(
-                    d["traffic_generator"]
-                ),
+                traffic_generator=TrafficGeneratorConfig.from_dict(d["traffic_generator"]),
                 **common_config,
             )
         else:
@@ -249,9 +247,7 @@ def from_dict(
         build_targets: list[BuildTargetConfiguration] = list(
             map(BuildTargetConfiguration.from_dict, d["build_targets"])
         )
-        test_suites: list[TestSuiteConfig] = list(
-            map(TestSuiteConfig.from_dict, d["test_suites"])
-        )
+        test_suites: list[TestSuiteConfig] = list(map(TestSuiteConfig.from_dict, d["test_suites"]))
         sut_name = d["system_under_test_node"]["node_name"]
         skip_smoke_tests = d.get("skip_smoke_tests", False)
         assert sut_name in node_map, f"Unknown SUT {sut_name} in execution {d}"
@@ -268,9 +264,7 @@ def from_dict(
         ), f"Invalid TG configuration {traffic_generator_node}"
 
         vdevs = (
-            d["system_under_test_node"]["vdevs"]
-            if "vdevs" in d["system_under_test_node"]
-            else []
+            d["system_under_test_node"]["vdevs"] if "vdevs" in d["system_under_test_node"] else []
         )
         return ExecutionConfiguration(
             build_targets=build_targets,
@@ -299,9 +293,7 @@ def from_dict(d: dict) -> "Configuration":
         assert len(nodes) == len(node_map), "Duplicate node names are not allowed"
 
         executions: list[ExecutionConfiguration] = list(
-            map(
-                ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d]
-            )
+            map(ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d])
         )
 
         return Configuration(executions=executions)
@@ -315,9 +307,7 @@ def load_config() -> Configuration:
     with open(SETTINGS.config_file_path, "r") as f:
         config_data = yaml.safe_load(f)
 
-    schema_path = os.path.join(
-        pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json"
-    )
+    schema_path = os.path.join(pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json")
 
     with open(schema_path, "r") as f:
         schema = json.load(f)
dts/framework/dts.py +4 -11
index f773f0c38d..25d6942d81 100644
@@ -92,9 +92,7 @@ def _run_execution(
     Run the given execution. This involves running the execution setup as well as
     running all build targets in the given execution.
     """
-    dts_logger.info(
-        f"Running execution with SUT '{execution.system_under_test_node.name}'."
-    )
+    dts_logger.info(f"Running execution with SUT '{execution.system_under_test_node.name}'.")
     execution_result = result.add_execution(sut_node.config)
     execution_result.add_sut_info(sut_node.node_info)
 
@@ -107,9 +105,7 @@ def _run_execution(
 
     else:
         for build_target in execution.build_targets:
-            _run_build_target(
-                sut_node, tg_node, build_target, execution, execution_result
-            )
+            _run_build_target(sut_node, tg_node, build_target, execution, execution_result)
 
     finally:
         try:
@@ -170,13 +166,10 @@ def _run_all_suites(
         execution.test_suites[:0] = [TestSuiteConfig.from_dict("smoke_tests")]
     for test_suite_config in execution.test_suites:
         try:
-            _run_single_suite(
-                sut_node, tg_node, execution, build_target_result, test_suite_config
-            )
+            _run_single_suite(sut_node, tg_node, execution, build_target_result, test_suite_config)
         except BlockingTestSuiteError as e:
             dts_logger.exception(
-                f"An error occurred within {test_suite_config.test_suite}. "
-                "Skipping build target..."
+                f"An error occurred within {test_suite_config.test_suite}. Skipping build target."
             )
             result.add_error(e)
             end_build_target = True
dts/framework/exception.py +1 -4
index 001a5a5496..b362e42924 100644
@@ -116,10 +116,7 @@ def __init__(self, command: str, command_return_code: int):
         self.command_return_code = command_return_code
 
     def __str__(self) -> str:
-        return (
-            f"Command {self.command} returned a non-zero exit code: "
-            f"{self.command_return_code}"
-        )
+        return f"Command {self.command} returned a non-zero exit code: {self.command_return_code}"
 
 
 class RemoteDirectoryExistsError(DTSError):
dts/framework/remote_session/__init__.py +1 -3
index 00b6d1f03a..6124417bd7 100644
@@ -30,9 +30,7 @@
 )
 
 
-def create_session(
-    node_config: NodeConfiguration, name: str, logger: DTSLOG
-) -> OSSession:
+def create_session(node_config: NodeConfiguration, name: str, logger: DTSLOG) -> OSSession:
     match node_config.os:
         case OS.linux:
             return LinuxSession(node_config, name, logger)
dts/framework/remote_session/linux_session.py +10 -29
index a3f1a6bf3b..fd877fbfae 100644
@@ -82,9 +82,7 @@ def setup_hugepages(self, hugepage_amount: int, force_first_numa: bool) -> None:
         self._mount_huge_pages()
 
     def _get_hugepage_size(self) -> int:
-        hugepage_size = self.send_command(
-            "awk '/Hugepagesize/ {print $2}' /proc/meminfo"
-        ).stdout
+        hugepage_size = self.send_command("awk '/Hugepagesize/ {print $2}' /proc/meminfo").stdout
         return int(hugepage_size)
 
     def _get_hugepages_total(self) -> int:
@@ -120,13 +118,9 @@ def _supports_numa(self) -> bool:
         # there's no reason to do any numa specific configuration)
         return len(self._numa_nodes) > 1
 
-    def _configure_huge_pages(
-        self, amount: int, size: int, force_first_numa: bool
-    ) -> None:
+    def _configure_huge_pages(self, amount: int, size: int, force_first_numa: bool) -> None:
         self._logger.info("Configuring Hugepages.")
-        hugepage_config_path = (
-            f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
-        )
+        hugepage_config_path = f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
         if force_first_numa and self._supports_numa():
             # clear non-numa hugepages
             self.send_command(f"echo 0 | tee {hugepage_config_path}", privileged=True)
@@ -135,24 +129,18 @@ def _configure_huge_pages(
                 f"/hugepages-{size}kB/nr_hugepages"
             )
 
-        self.send_command(
-            f"echo {amount} | tee {hugepage_config_path}", privileged=True
-        )
+        self.send_command(f"echo {amount} | tee {hugepage_config_path}", privileged=True)
 
     def update_ports(self, ports: list[Port]) -> None:
         self._logger.debug("Gathering port info.")
         for port in ports:
-            assert (
-                port.node == self.name
-            ), "Attempted to gather port info on the wrong node"
+            assert port.node == self.name, "Attempted to gather port info on the wrong node"
 
         port_info_list = self._get_lshw_info()
         for port in ports:
             for port_info in port_info_list:
                 if f"pci@{port.pci}" == port_info.get("businfo"):
-                    self._update_port_attr(
-                        port, port_info.get("logicalname"), "logical_name"
-                    )
+                    self._update_port_attr(port, port_info.get("logicalname"), "logical_name")
                     self._update_port_attr(port, port_info.get("serial"), "mac_address")
                     port_info_list.remove(port_info)
                     break
@@ -163,25 +151,18 @@ def _get_lshw_info(self) -> list[LshwOutput]:
         output = self.send_command("lshw -quiet -json -C network", verify=True)
         return json.loads(output.stdout)
 
-    def _update_port_attr(
-        self, port: Port, attr_value: str | None, attr_name: str
-    ) -> None:
+    def _update_port_attr(self, port: Port, attr_value: str | None, attr_name: str) -> None:
         if attr_value:
             setattr(port, attr_name, attr_value)
-            self._logger.debug(
-                f"Found '{attr_name}' of port {port.pci}: '{attr_value}'."
-            )
+            self._logger.debug(f"Found '{attr_name}' of port {port.pci}: '{attr_value}'.")
         else:
             self._logger.warning(
-                f"Attempted to get '{attr_name}' of port {port.pci}, "
-                f"but it doesn't exist."
+                f"Attempted to get '{attr_name}' of port {port.pci}, but it doesn't exist."
             )
 
     def configure_port_state(self, port: Port, enable: bool) -> None:
         state = "up" if enable else "down"
-        self.send_command(
-            f"ip link set dev {port.logical_name} {state}", privileged=True
-        )
+        self.send_command(f"ip link set dev {port.logical_name} {state}", privileged=True)
 
     def configure_port_ip_address(
         self,
dts/framework/remote_session/posix_session.py +8 -22
index 5da0516e05..a29e2e8280 100644
@@ -94,8 +94,7 @@ def extract_remote_tarball(
         expected_dir: str | PurePath | None = None,
     ) -> None:
         self.send_command(
-            f"tar xfm {remote_tarball_path} "
-            f"-C {PurePosixPath(remote_tarball_path).parent}",
+            f"tar xfm {remote_tarball_path} -C {PurePosixPath(remote_tarball_path).parent}",
             60,
         )
         if expected_dir:
@@ -125,8 +124,7 @@ def build_dpdk(
                 self._logger.info("Configuring DPDK build from scratch.")
                 self.remove_remote_dir(remote_dpdk_build_dir)
                 self.send_command(
-                    f"meson setup "
-                    f"{meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
+                    f"meson setup {meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
                     timeout,
                     verify=True,
                     env=env_vars,
@@ -140,9 +138,7 @@ def build_dpdk(
             raise DPDKBuildError(f"DPDK build failed when doing '{e.command}'.")
 
     def get_dpdk_version(self, build_dir: str | PurePath) -> str:
-        out = self.send_command(
-            f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True
-        )
+        out = self.send_command(f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True)
         return out.stdout
 
     def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
@@ -156,9 +152,7 @@ def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
             self._check_dpdk_hugepages(dpdk_runtime_dirs)
             self._remove_dpdk_runtime_dirs(dpdk_runtime_dirs)
 
-    def _get_dpdk_runtime_dirs(
-        self, dpdk_prefix_list: Iterable[str]
-    ) -> list[PurePosixPath]:
+    def _get_dpdk_runtime_dirs(self, dpdk_prefix_list: Iterable[str]) -> list[PurePosixPath]:
         prefix = PurePosixPath("/var", "run", "dpdk")
         if not dpdk_prefix_list:
             remote_prefixes = self._list_remote_dirs(prefix)
@@ -174,9 +168,7 @@ def _list_remote_dirs(self, remote_path: str | PurePath) -> list[str] | None:
         Return a list of directories of the remote_dir.
         If remote_path doesn't exist, return None.
         """
-        out = self.send_command(
-            f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'"
-        ).stdout
+        out = self.send_command(f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'").stdout
         if "No such file or directory" in out:
             return None
         else:
@@ -200,9 +192,7 @@ def _remote_files_exists(self, remote_path: PurePath) -> bool:
         result = self.send_command(f"test -e {remote_path}")
         return not result.return_code
 
-    def _check_dpdk_hugepages(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _check_dpdk_hugepages(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             hugepage_info = PurePosixPath(dpdk_runtime_dir, "hugepage_info")
             if self._remote_files_exists(hugepage_info):
@@ -213,9 +203,7 @@ def _check_dpdk_hugepages(
                     self._logger.warning(out)
                     self._logger.warning("*******************************************")
 
-    def _remove_dpdk_runtime_dirs(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _remove_dpdk_runtime_dirs(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             self.remove_remote_dir(dpdk_runtime_dir)
 
@@ -245,6 +233,4 @@ def get_node_info(self) -> NodeInfo:
             SETTINGS.timeout,
         ).stdout.split("\n")
         kernel_version = self.send_command("uname -r", SETTINGS.timeout).stdout
-        return NodeInfo(
-            os_release_info[0].strip(), os_release_info[1].strip(), kernel_version
-        )
+        return NodeInfo(os_release_info[0].strip(), os_release_info[1].strip(), kernel_version)
dts/framework/remote_session/remote/interactive_remote_session.py +2 -5
index 9085a668e8..098ded1bb0 100644
@@ -73,9 +73,7 @@ def __init__(self, node_config: NodeConfiguration, _logger: DTSLOG) -> None:
             f"Initializing interactive connection for {self.username}@{self.hostname}"
         )
         self._connect()
-        self._logger.info(
-            f"Interactive connection successful for {self.username}@{self.hostname}"
-        )
+        self._logger.info(f"Interactive connection successful for {self.username}@{self.hostname}")
 
     def _connect(self) -> None:
         """Establish a connection to the node.
@@ -108,8 +106,7 @@ def _connect(self) -> None:
                 self._logger.debug(traceback.format_exc())
                 self._logger.warning(e)
                 self._logger.info(
-                    "Retrying interactive session connection: "
-                    f"retry number {retry_attempt +1}"
+                    f"Retrying interactive session connection: retry number {retry_attempt +1}"
                 )
             else:
                 break
dts/framework/remote_session/remote/interactive_shell.py +1 -3
index c24376b2a8..4db19fb9b3 100644
@@ -85,9 +85,7 @@ def __init__(
         self._app_args = app_args
         self._start_application(get_privileged_command)
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """Starts a new interactive application based on the path to the app.
 
         This method is often overridden by subclasses as their process for
dts/framework/remote_session/remote/remote_session.py +2 -6
index 0647d93de4..719f7d1ef7 100644
@@ -96,9 +96,7 @@ def send_command(
         If verify is True, check the return code of the executed command
         and raise a RemoteCommandExecutionError if the command failed.
         """
-        self._logger.info(
-            f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else "")
-        )
+        self._logger.info(f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else ""))
         result = self._send_command(command, timeout, env)
         if verify and result.return_code:
             self._logger.debug(
@@ -112,9 +110,7 @@ def send_command(
         return result
 
     @abstractmethod
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """
         Use the underlying protocol to execute the command using optional env vars
         and return CommandResult.
dts/framework/remote_session/remote/ssh_session.py +4 -12
index 8d127f1601..1a7ee649ab 100644
@@ -80,9 +80,7 @@ def _connect(self) -> None:
                 if error not in errors:
                     errors.append(error)
 
-                self._logger.info(
-                    f"Retrying connection: retry number {retry_attempt + 1}."
-                )
+                self._logger.info(f"Retrying connection: retry number {retry_attempt + 1}.")
 
             else:
                 break
@@ -92,9 +90,7 @@ def _connect(self) -> None:
     def is_alive(self) -> bool:
         return self.session.is_connected
 
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """Send a command and return the result of the execution.
 
         Args:
@@ -107,9 +103,7 @@ def _send_command(
             SSHTimeoutError: The command execution timed out.
         """
         try:
-            output = self.session.run(
-                command, env=env, warn=True, hide=True, timeout=timeout
-            )
+            output = self.session.run(command, env=env, warn=True, hide=True, timeout=timeout)
 
         except (UnexpectedExit, ThreadException) as e:
             self._logger.exception(e)
@@ -119,9 +113,7 @@ def _send_command(
             self._logger.exception(e)
             raise SSHTimeoutError(command, e.result.stderr) from e
 
-        return CommandResult(
-            self.name, command, output.stdout, output.stderr, output.return_code
-        )
+        return CommandResult(self.name, command, output.stdout, output.stderr, output.return_code)
 
     def copy_from(
         self,
dts/framework/remote_session/remote/testpmd_shell.py +2 -6
index 1455b5a199..08ac311016 100644
@@ -21,13 +21,9 @@ class TestPmdShell(InteractiveShell):
     path: PurePath = PurePath("app", "dpdk-testpmd")
     dpdk_app: bool = True
     _default_prompt: str = "testpmd>"
-    _command_extra_chars: str = (
-        "\n"  # We want to append an extra newline to every command
-    )
+    _command_extra_chars: str = "\n"  # We want to append an extra newline to every command
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """See "_start_application" in InteractiveShell."""
         self._app_args += " -- -i"
         super()._start_application(get_privileged_command)
dts/framework/settings.py +5 -10
index cfa39d011b..974793a11a 100644
@@ -72,9 +72,8 @@ class _Settings:
 
 def _get_parser() -> argparse.ArgumentParser:
     parser = argparse.ArgumentParser(
-        description="Run DPDK test suites. All options may be specified with "
-        "the environment variables provided in brackets. "
-        "Command line arguments have higher priority.",
+        description="Run DPDK test suites. All options may be specified with the environment "
+        "variables provided in brackets. Command line arguments have higher priority.",
         formatter_class=argparse.ArgumentDefaultsHelpFormatter,
     )
 
@@ -82,8 +81,7 @@ def _get_parser() -> argparse.ArgumentParser:
         "--config-file",
         action=_env_arg("DTS_CFG_FILE"),
         default="conf.yaml",
-        help="[DTS_CFG_FILE] configuration file that describes the test cases, SUTs "
-        "and targets.",
+        help="[DTS_CFG_FILE] configuration file that describes the test cases, SUTs and targets.",
     )
 
     parser.add_argument(
@@ -100,8 +98,7 @@ def _get_parser() -> argparse.ArgumentParser:
         action=_env_arg("DTS_TIMEOUT"),
         default=15,
         type=float,
-        help="[DTS_TIMEOUT] The default timeout for all DTS operations except for "
-        "compiling DPDK.",
+        help="[DTS_TIMEOUT] The default timeout for all DTS operations except for compiling DPDK.",
     )
 
     parser.add_argument(
@@ -170,9 +167,7 @@ def _get_settings() -> _Settings:
         timeout=parsed_args.timeout,
         verbose=(parsed_args.verbose == "Y"),
         skip_setup=(parsed_args.skip_setup == "Y"),
-        dpdk_tarball_path=Path(
-            DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir)
-        )
+        dpdk_tarball_path=Path(DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir))
         if not os.path.exists(parsed_args.tarball)
         else Path(parsed_args.tarball),
         compile_timeout=parsed_args.compile_timeout,
dts/framework/test_result.py +4 -12
index f0fbe80f6f..4c2e7e2418 100644
@@ -83,9 +83,7 @@ def __iadd__(self, other: Result) -> "Statistics":
         """
         self[other.name] += 1
         self["PASS RATE"] = (
-            float(self[Result.PASS.name])
-            * 100
-            / sum(self[result.name] for result in Result)
+            float(self[Result.PASS.name]) * 100 / sum(self[result.name] for result in Result)
         )
         return self
 
@@ -135,9 +133,7 @@ def _get_setup_teardown_errors(self) -> list[Exception]:
 
     def _get_inner_errors(self) -> list[Exception]:
         return [
-            error
-            for inner_result in self._inner_results
-            for error in inner_result.get_errors()
+            error for inner_result in self._inner_results for error in inner_result.get_errors()
         ]
 
     def get_errors(self) -> list[Exception]:
@@ -174,9 +170,7 @@ def add_stats(self, statistics: Statistics) -> None:
         statistics += self.result
 
     def __bool__(self) -> bool:
-        return (
-            bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
-        )
+        return bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
 
 
 class TestSuiteResult(BaseResult):
@@ -247,9 +241,7 @@ def __init__(self, sut_node: NodeConfiguration):
         super(ExecutionResult, self).__init__()
         self.sut_node = sut_node
 
-    def add_build_target(
-        self, build_target: BuildTargetConfiguration
-    ) -> BuildTargetResult:
+    def add_build_target(self, build_target: BuildTargetConfiguration) -> BuildTargetResult:
         build_target_result = BuildTargetResult(build_target)
         self._inner_results.append(build_target_result)
         return build_target_result
dts/framework/test_suite.py +14 -43

121 lines not on this page · raw message

dts/framework/testbed_model/capturing_traffic_generator.py +2 -5
index ab98987f8e..e6512061d7 100644
@@ -100,8 +100,7 @@ def send_packets_and_capture(
         """
         self._logger.debug(get_packet_summaries(packets))
         self._logger.debug(
-            f"Sending packet on {send_port.logical_name}, "
-            f"receiving on {receive_port.logical_name}."
+            f"Sending packet on {send_port.logical_name}, receiving on {receive_port.logical_name}."
         )
         received_packets = self._send_packets_and_capture(
             packets,
@@ -110,9 +109,7 @@ def send_packets_and_capture(
             duration,
         )
 
-        self._logger.debug(
-            f"Received packets: {get_packet_summaries(received_packets)}"
-        )
+        self._logger.debug(f"Received packets: {get_packet_summaries(received_packets)}")
         self._write_capture_from_packets(capture_name, received_packets)
         return received_packets
 
dts/framework/testbed_model/hw/cpu.py +5 -15
index d1918a12dc..cbc5fe7fff 100644
@@ -54,9 +54,7 @@ def __init__(self, lcore_list: list[int] | list[str] | list[LogicalCore] | str):
 
         # the input lcores may not be sorted
         self._lcore_list.sort()
-        self._lcore_str = (
-            f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
-        )
+        self._lcore_str = f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
 
     @property
     def lcore_list(self) -> list[int]:
@@ -70,15 +68,11 @@ def _get_consecutive_lcores_range(self, lcore_ids_list: list[int]) -> list[str]:
                 segment.append(lcore_id)
             else:
                 formatted_core_list.append(
-                    f"{segment[0]}-{segment[-1]}"
-                    if len(segment) > 1
-                    else f"{segment[0]}"
+                    f"{segment[0]}-{segment[-1]}" if len(segment) > 1 else f"{segment[0]}"
                 )
                 current_core_index = lcore_ids_list.index(lcore_id)
                 formatted_core_list.extend(
-                    self._get_consecutive_lcores_range(
-                        lcore_ids_list[current_core_index:]
-                    )
+                    self._get_consecutive_lcores_range(lcore_ids_list[current_core_index:])
                 )
                 segment.clear()
                 break
@@ -125,9 +119,7 @@ def __init__(
         self._filter_specifier = filter_specifier
 
         # sorting by core is needed in case hyperthreading is enabled
-        self._lcores_to_filter = sorted(
-            lcore_list, key=lambda x: x.core, reverse=not ascending
-        )
+        self._lcores_to_filter = sorted(lcore_list, key=lambda x: x.core, reverse=not ascending)
         self.filter()
 
     @abstractmethod
@@ -220,9 +212,7 @@ def _filter_cores_from_socket(
                 else:
                     # we have enough lcores per this core
                     continue
-            elif self._filter_specifier.cores_per_socket > len(
-                lcore_count_per_core_map
-            ):
+            elif self._filter_specifier.cores_per_socket > len(lcore_count_per_core_map):
                 # only add cores if we need more
                 lcore_count_per_core_map[lcore.core] = 1
                 filtered_lcores.append(lcore)
dts/framework/testbed_model/node.py +2 -6
index fc01e0bf8e..ef700d8114 100644
@@ -103,18 +103,14 @@ def _tear_down_execution(self) -> None:
         is not decorated so that the derived class doesn't have to use the decorator.
         """
 
-    def set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Perform the build target setup that will be done for each build target
         tested on this node.
         """
         self._set_up_build_target(build_target_config)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         This method exists to be optionally overwritten by derived classes and
         is not decorated so that the derived class doesn't have to use the decorator.
dts/framework/testbed_model/scapy.py +5 -14
index af0d4dbb25..9083e92b3d 100644
@@ -96,9 +96,7 @@ def scapy_send_packets_and_capture(
     return [scapy_packet.build() for scapy_packet in sniffer.stop(join=True)]
 
 
-def scapy_send_packets(
-    xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str
-) -> None:
+def scapy_send_packets(xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str) -> None:
     """RPC function to send packets.
 
     The function is meant to be executed on the remote TG node.
@@ -197,9 +195,7 @@ class ScapyTrafficGenerator(CapturingTrafficGenerator):
     def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._config = config
         self._tg_node = tg_node
-        self._logger = getLogger(
-            f"{self._tg_node.name} {self._config.traffic_generator_type}"
-        )
+        self._logger = getLogger(f"{self._tg_node.name} {self._config.traffic_generator_type}")
 
         assert (
             self._tg_node.config.os == OS.linux
@@ -218,9 +214,7 @@ def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._start_xmlrpc_server_in_remote_python(xmlrpc_server_listen_port)
 
         # connect to the server
-        server_url = (
-            f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
-        )
+        server_url = f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
         self.rpc_server_proxy = xmlrpc.client.ServerProxy(
             server_url, allow_none=True, verbose=SETTINGS.verbose
         )
@@ -240,17 +234,14 @@ def _start_xmlrpc_server_in_remote_python(self, listen_port: int):
         src = inspect.getsource(QuittableXMLRPCServer)
         # Lines with only whitespace break the repl if in the middle of a function
         # or class, so strip all lines containing only whitespace
-        src = "\n".join(
-            [line for line in src.splitlines() if not line.isspace() and line != ""]
-        )
+        src = "\n".join([line for line in src.splitlines() if not line.isspace() and line != ""])
 
         spacing = "\n" * 4
 
         # execute it in the python terminal
         self.session.send_command(spacing + src + spacing)
         self.session.send_command(
-            f"server = QuittableXMLRPCServer(('0.0.0.0', {listen_port}));"
-            f"server.serve_forever()",
+            f"server = QuittableXMLRPCServer(('0.0.0.0', {listen_port}));server.serve_forever()",
             "XMLRPC OK",
         )
 
dts/framework/testbed_model/sut_node.py +11 -29
index 202aebfd06..d5d8905be7 100644
@@ -129,9 +129,7 @@ def remote_dpdk_build_dir(self) -> PurePath:
     @property
     def dpdk_version(self) -> str:
         if self._dpdk_version is None:
-            self._dpdk_version = self.main_session.get_dpdk_version(
-                self._remote_dpdk_dir
-            )
+            self._dpdk_version = self.main_session.get_dpdk_version(self._remote_dpdk_dir)
         return self._dpdk_version
 
     @property
@@ -149,8 +147,7 @@ def compiler_version(self) -> str:
                 )
             else:
                 self._logger.warning(
-                    "Failed to get compiler version because"
-                    "_build_target_config is None."
+                    "Failed to get compiler version because _build_target_config is None."
                 )
                 return ""
         return self._compiler_version
@@ -163,9 +160,7 @@ def get_build_target_info(self) -> BuildTargetInfo:
     def _guess_dpdk_remote_dir(self) -> PurePath:
         return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Setup DPDK on the SUT node.
         """
@@ -177,23 +172,18 @@ def _set_up_build_target(
         self._copy_dpdk_tarball()
         self._build_dpdk()
 
-    def _configure_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _configure_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Populate common environment variables and set build target config.
         """
         self._env_vars = {}
         self._build_target_config = build_target_config
-        self._env_vars.update(
-            self.main_session.get_dpdk_build_env_vars(build_target_config.arch)
-        )
+        self._env_vars.update(self.main_session.get_dpdk_build_env_vars(build_target_config.arch))
         self._env_vars["CC"] = build_target_config.compiler.name
         if build_target_config.compiler_wrapper:
             self._env_vars["CC"] = (
-                f"'{build_target_config.compiler_wrapper} "
-                f"{build_target_config.compiler.name}'"
-            )
+                f"'{build_target_config.compiler_wrapper} {build_target_config.compiler.name}'"
+            )  # fmt: skip
 
     @Node.skip_setup
     def _copy_dpdk_tarball(self) -> None:
@@ -224,9 +214,7 @@ def _copy_dpdk_tarball(self) -> None:
         self.main_session.remove_remote_dir(self._remote_dpdk_dir)
 
         # then extract to remote path
-        self.main_session.extract_remote_tarball(
-            remote_tarball_path, self._remote_dpdk_dir
-        )
+        self.main_session.extract_remote_tarball(remote_tarball_path, self._remote_dpdk_dir)
 
     @Node.skip_setup
     def _build_dpdk(self) -> None:
@@ -263,9 +251,7 @@ def build_dpdk_app(self, app_name: str, **meson_dpdk_args: str | bool) -> PurePa
         )
 
         if app_name == "all":
-            return self.main_session.join_remote_path(
-                self.remote_dpdk_build_dir, "examples"
-            )
+            return self.main_session.join_remote_path(self.remote_dpdk_build_dir, "examples")
         return self.main_session.join_remote_path(
             self.remote_dpdk_build_dir, "examples", f"dpdk-{app_name}"
         )
@@ -319,9 +305,7 @@ def create_eal_parameters(
                 '-c 0xf -a 0000:88:00.0 --file-prefix=dpdk_1112_20190809143420';
         """
 
-        lcore_list = LogicalCoreList(
-            self.filter_lcores(lcore_filter_specifier, ascending_cores)
-        )
+        lcore_list = LogicalCoreList(self.filter_lcores(lcore_filter_specifier, ascending_cores))
 
         if append_prefix_timestamp:
             prefix = f"{prefix}_{self._dpdk_timestamp}"
@@ -386,6 +370,4 @@ def create_interactive_shell(
                 self.remote_dpdk_build_dir, shell_cls.path
             )
 
-        return super().create_interactive_shell(
-            shell_cls, timeout, privileged, str(eal_parameters)
-        )
+        return super().create_interactive_shell(shell_cls, timeout, privileged, str(eal_parameters))
dts/framework/testbed_model/tg_node.py +2 -5
index 27025cfa31..79a55663b5 100644
@@ -45,9 +45,7 @@ class TGNode(Node):
 
     def __init__(self, node_config: TGNodeConfiguration):
         super(TGNode, self).__init__(node_config)
-        self.traffic_generator = create_traffic_generator(
-            self, node_config.traffic_generator
-        )
+        self.traffic_generator = create_traffic_generator(self, node_config.traffic_generator)
         self._logger.info(f"Created node: {self.name}")
 
     def send_packet_and_capture(
@@ -94,6 +92,5 @@ def create_traffic_generator(
             return ScapyTrafficGenerator(tg_node, traffic_generator_config)
         case _:
             raise ConfigurationError(
-                "Unknown traffic generator: "
-                f"{traffic_generator_config.traffic_generator_type}"
+                f"Unknown traffic generator: {traffic_generator_config.traffic_generator_type}"
             )
dts/framework/utils.py +5 -15
index d27c2c5b5f..d098d364ff 100644
@@ -19,9 +19,7 @@
 
 class StrEnum(Enum):
     @staticmethod
-    def _generate_next_value_(
-        name: str, start: int, count: int, last_values: object
-    ) -> str:
+    def _generate_next_value_(name: str, start: int, count: int, last_values: object) -> str:
         return name
 
     def __str__(self) -> str:
@@ -32,9 +30,7 @@ def __str__(self) -> str:
 
 
 def check_dts_python_version() -> None:
-    if sys.version_info.major < 3 or (
-        sys.version_info.major == 3 and sys.version_info.minor < 10
-    ):
+    if sys.version_info.major < 3 or (sys.version_info.major == 3 and sys.version_info.minor < 10):
         print(
             RED(
                 (
@@ -60,9 +56,7 @@ def expand_range(range_str: str) -> list[int]:
         range_boundaries = range_str.split("-")
         # will throw an exception when items in range_boundaries can't be converted,
         # serving as type check
-        expanded_range.extend(
-            range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1)
-        )
+        expanded_range.extend(range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1))
 
     return expanded_range
 
@@ -71,9 +65,7 @@ def get_packet_summaries(packets: list[Packet]):
     if len(packets) == 1:
         packet_summaries = packets[0].summary()
     else:
-        packet_summaries = json.dumps(
-            list(map(lambda pkt: pkt.summary(), packets)), indent=4
-        )
+        packet_summaries = json.dumps(list(map(lambda pkt: pkt.summary(), packets)), indent=4)
     return f"Packet contents: \n{packet_summaries}"
 
 
@@ -94,9 +86,7 @@ class MesonArgs(object):
     _default_library: str
 
     def __init__(self, default_library: str | None = None, **dpdk_args: str | bool):
-        self._default_library = (
-            f"--default-library={default_library}" if default_library else ""
-        )
+        self._default_library = f"--default-library={default_library}" if default_library else ""
         self._dpdk_args = " ".join(
             (
                 f"-D{dpdk_arg_name}={dpdk_arg_value}"
dts/tests/TestSuite_hello_world.py +1 -3
index 7e3d95c0cf..768ba1cfa8 100644
@@ -34,9 +34,7 @@ def test_hello_world_single_core(self) -> None:
         # get the first usable core
         lcore_amount = LogicalCoreCount(1, 1, 1)
         lcores = LogicalCoreCountFilter(self.sut_node.lcores, lcore_amount).filter()
-        eal_para = self.sut_node.create_eal_parameters(
-            lcore_filter_specifier=lcore_amount
-        )
+        eal_para = self.sut_node.create_eal_parameters(lcore_filter_specifier=lcore_amount)
         result = self.sut_node.run_dpdk_app(self.app_helloworld_path, eal_para)
         self.verify(
             f"hello from core {int(lcores[0])}" in result.stdout,
dts/tests/TestSuite_smoke_tests.py +3 -8
index 4a269df75b..670053c6a5 100644
@@ -45,13 +45,10 @@ def test_driver_tests(self) -> None:
         for dev in self.sut_node.virtual_devices:
             vdev_args += f"--vdev {dev} "
         vdev_args = vdev_args[:-1]
-        driver_tests_command = (
-            f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
-        )
+        driver_tests_command = f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
         if vdev_args:
             self._logger.info(
-                "Running driver tests with the following virtual "
-                f"devices: {vdev_args}"
+                f"Running driver tests with the following virtual devices: {vdev_args}"
             )
             driver_tests_command += f' --test-args "{vdev_args}"'
 
@@ -67,9 +64,7 @@ def test_devices_listed_in_testpmd(self) -> None:
         Test:
             Uses testpmd driver to verify that devices have been found by testpmd.
         """
-        testpmd_driver = self.sut_node.create_interactive_shell(
-            TestPmdShell, privileged=True
-        )
+        testpmd_driver = self.sut_node.create_interactive_shell(TestPmdShell, privileged=True)
         dev_list = [str(x) for x in testpmd_driver.get_devices()]
         for nic in self.nics_in_node:
             self.verify(
Signature · 1 line
2.34.1
#27 lore raw

PATCH v6 1/2 doc: increase python max line length to 100

Unify with C recommendations which allow line length of up to 100 characters.

---
 .editorconfig                            | 2 +-
 doc/guides/contributing/coding_style.rst | 1 +
 dts/pyproject.toml                       | 4 ++--
 3 files changed, 4 insertions(+), 3 deletions(-)
.editorconfig +1 -1
index ab41c95085..1e7d74213f 100644
@@ -16,7 +16,7 @@ max_line_length = 100
 [*.py]
 indent_style = space
 indent_size = 4
-max_line_length = 79
+max_line_length = 100
 
 [meson.build]
 indent_style = space
doc/guides/contributing/coding_style.rst +1 -0
index 648849899d..1ebc79ca3c 100644
@@ -880,6 +880,7 @@ All Python code should be compliant with
 `PEP8 (Style Guide for Python Code) <https://www.python.org/dev/peps/pep-0008/>`_.
 
 The ``pep8`` tool can be used for testing compliance with the guidelines.
+Note that line lengths are acceptable up to 100 characters, which is in line with C recommendations.
 
 Integrating with the Build System
 ---------------------------------
dts/pyproject.toml +2 -2
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
 [tool.pylama]
 linters = "mccabe,pycodestyle,pyflakes"
 format = "pylint"
-max_line_length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+max_line_length = 100
 
 [tool.mypy]
 python_version = "3.10"
@@ -55,4 +55,4 @@ profile = "black"
 [tool.black]
 target-version = ['py310']
 include = '\.pyi?$'
-line-length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length = 100
Signature · 1 line
2.34.1
#28 lore raw

PATCH v6 2/2 dts: reformat to 100 line length

Reformat to 100 from the previous 88 to unify with C recommendations.

The C recommendation is the maximum with the ideal being 80. The Python tools are not suitable for this flexibility.

We require all patches with DTS code to be validated with the devtools/dts-check-format.sh script, part of which is the black formatting tool. We've set up black to format all of the codebase and the reformat is needed so that future submitters are not affected.

---
 dts/framework/config/__init__.py              | 20 ++-----
 dts/framework/dts.py                          | 15 ++---
 dts/framework/exception.py                    |  5 +-
 dts/framework/remote_session/__init__.py      |  4 +-
 dts/framework/remote_session/linux_session.py | 39 ++++---------
 dts/framework/remote_session/posix_session.py | 30 +++-------
 .../remote/interactive_remote_session.py      |  7 +--
 .../remote/interactive_shell.py               |  4 +-
 .../remote_session/remote/remote_session.py   |  8 +--
 .../remote_session/remote/ssh_session.py      | 16 ++----
 .../remote_session/remote/testpmd_shell.py    |  8 +--
 dts/framework/settings.py                     | 15 ++---
 dts/framework/test_result.py                  | 16 ++----
 dts/framework/test_suite.py                   | 57 +++++--------------
 .../capturing_traffic_generator.py            |  7 +--
 dts/framework/testbed_model/hw/cpu.py         | 20 ++-----
 dts/framework/testbed_model/node.py           |  8 +--
 dts/framework/testbed_model/scapy.py          | 19 ++-----
 dts/framework/testbed_model/sut_node.py       | 40 ++++---------
 dts/framework/testbed_model/tg_node.py        |  7 +--
 dts/framework/utils.py                        | 20 ++-----
 dts/tests/TestSuite_hello_world.py            |  4 +-
 dts/tests/TestSuite_smoke_tests.py            | 11 +---
 23 files changed, 99 insertions(+), 281 deletions(-)
dts/framework/config/__init__.py +5 -15
index cb7e00ba34..9b32cf0532 100644
@@ -140,9 +140,7 @@ def from_dict(d: dict) -> Union["SutNodeConfiguration", "TGNodeConfiguration"]:
 
         if "traffic_generator" in d:
             return TGNodeConfiguration(
-                traffic_generator=TrafficGeneratorConfig.from_dict(
-                    d["traffic_generator"]
-                ),
+                traffic_generator=TrafficGeneratorConfig.from_dict(d["traffic_generator"]),
                 **common_config,
             )
         else:
@@ -249,9 +247,7 @@ def from_dict(
         build_targets: list[BuildTargetConfiguration] = list(
             map(BuildTargetConfiguration.from_dict, d["build_targets"])
         )
-        test_suites: list[TestSuiteConfig] = list(
-            map(TestSuiteConfig.from_dict, d["test_suites"])
-        )
+        test_suites: list[TestSuiteConfig] = list(map(TestSuiteConfig.from_dict, d["test_suites"]))
         sut_name = d["system_under_test_node"]["node_name"]
         skip_smoke_tests = d.get("skip_smoke_tests", False)
         assert sut_name in node_map, f"Unknown SUT {sut_name} in execution {d}"
@@ -268,9 +264,7 @@ def from_dict(
         ), f"Invalid TG configuration {traffic_generator_node}"
 
         vdevs = (
-            d["system_under_test_node"]["vdevs"]
-            if "vdevs" in d["system_under_test_node"]
-            else []
+            d["system_under_test_node"]["vdevs"] if "vdevs" in d["system_under_test_node"] else []
         )
         return ExecutionConfiguration(
             build_targets=build_targets,
@@ -299,9 +293,7 @@ def from_dict(d: dict) -> "Configuration":
         assert len(nodes) == len(node_map), "Duplicate node names are not allowed"
 
         executions: list[ExecutionConfiguration] = list(
-            map(
-                ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d]
-            )
+            map(ExecutionConfiguration.from_dict, d["executions"], [node_map for _ in d])
         )
 
         return Configuration(executions=executions)
@@ -315,9 +307,7 @@ def load_config() -> Configuration:
     with open(SETTINGS.config_file_path, "r") as f:
         config_data = yaml.safe_load(f)
 
-    schema_path = os.path.join(
-        pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json"
-    )
+    schema_path = os.path.join(pathlib.Path(__file__).parent.resolve(), "conf_yaml_schema.json")
 
     with open(schema_path, "r") as f:
         schema = json.load(f)
dts/framework/dts.py +4 -11
index f773f0c38d..25d6942d81 100644
@@ -92,9 +92,7 @@ def _run_execution(
     Run the given execution. This involves running the execution setup as well as
     running all build targets in the given execution.
     """
-    dts_logger.info(
-        f"Running execution with SUT '{execution.system_under_test_node.name}'."
-    )
+    dts_logger.info(f"Running execution with SUT '{execution.system_under_test_node.name}'.")
     execution_result = result.add_execution(sut_node.config)
     execution_result.add_sut_info(sut_node.node_info)
 
@@ -107,9 +105,7 @@ def _run_execution(
 
     else:
         for build_target in execution.build_targets:
-            _run_build_target(
-                sut_node, tg_node, build_target, execution, execution_result
-            )
+            _run_build_target(sut_node, tg_node, build_target, execution, execution_result)
 
     finally:
         try:
@@ -170,13 +166,10 @@ def _run_all_suites(
         execution.test_suites[:0] = [TestSuiteConfig.from_dict("smoke_tests")]
     for test_suite_config in execution.test_suites:
         try:
-            _run_single_suite(
-                sut_node, tg_node, execution, build_target_result, test_suite_config
-            )
+            _run_single_suite(sut_node, tg_node, execution, build_target_result, test_suite_config)
         except BlockingTestSuiteError as e:
             dts_logger.exception(
-                f"An error occurred within {test_suite_config.test_suite}. "
-                "Skipping build target..."
+                f"An error occurred within {test_suite_config.test_suite}. Skipping build target."
             )
             result.add_error(e)
             end_build_target = True
dts/framework/exception.py +1 -4
index 001a5a5496..b362e42924 100644
@@ -116,10 +116,7 @@ def __init__(self, command: str, command_return_code: int):
         self.command_return_code = command_return_code
 
     def __str__(self) -> str:
-        return (
-            f"Command {self.command} returned a non-zero exit code: "
-            f"{self.command_return_code}"
-        )
+        return f"Command {self.command} returned a non-zero exit code: {self.command_return_code}"
 
 
 class RemoteDirectoryExistsError(DTSError):
dts/framework/remote_session/__init__.py +1 -3
index 00b6d1f03a..6124417bd7 100644
@@ -30,9 +30,7 @@
 )
 
 
-def create_session(
-    node_config: NodeConfiguration, name: str, logger: DTSLOG
-) -> OSSession:
+def create_session(node_config: NodeConfiguration, name: str, logger: DTSLOG) -> OSSession:
     match node_config.os:
         case OS.linux:
             return LinuxSession(node_config, name, logger)
dts/framework/remote_session/linux_session.py +10 -29
index a3f1a6bf3b..fd877fbfae 100644
@@ -82,9 +82,7 @@ def setup_hugepages(self, hugepage_amount: int, force_first_numa: bool) -> None:
         self._mount_huge_pages()
 
     def _get_hugepage_size(self) -> int:
-        hugepage_size = self.send_command(
-            "awk '/Hugepagesize/ {print $2}' /proc/meminfo"
-        ).stdout
+        hugepage_size = self.send_command("awk '/Hugepagesize/ {print $2}' /proc/meminfo").stdout
         return int(hugepage_size)
 
     def _get_hugepages_total(self) -> int:
@@ -120,13 +118,9 @@ def _supports_numa(self) -> bool:
         # there's no reason to do any numa specific configuration)
         return len(self._numa_nodes) > 1
 
-    def _configure_huge_pages(
-        self, amount: int, size: int, force_first_numa: bool
-    ) -> None:
+    def _configure_huge_pages(self, amount: int, size: int, force_first_numa: bool) -> None:
         self._logger.info("Configuring Hugepages.")
-        hugepage_config_path = (
-            f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
-        )
+        hugepage_config_path = f"/sys/kernel/mm/hugepages/hugepages-{size}kB/nr_hugepages"
         if force_first_numa and self._supports_numa():
             # clear non-numa hugepages
             self.send_command(f"echo 0 | tee {hugepage_config_path}", privileged=True)
@@ -135,24 +129,18 @@ def _configure_huge_pages(
                 f"/hugepages-{size}kB/nr_hugepages"
             )
 
-        self.send_command(
-            f"echo {amount} | tee {hugepage_config_path}", privileged=True
-        )
+        self.send_command(f"echo {amount} | tee {hugepage_config_path}", privileged=True)
 
     def update_ports(self, ports: list[Port]) -> None:
         self._logger.debug("Gathering port info.")
         for port in ports:
-            assert (
-                port.node == self.name
-            ), "Attempted to gather port info on the wrong node"
+            assert port.node == self.name, "Attempted to gather port info on the wrong node"
 
         port_info_list = self._get_lshw_info()
         for port in ports:
             for port_info in port_info_list:
                 if f"pci@{port.pci}" == port_info.get("businfo"):
-                    self._update_port_attr(
-                        port, port_info.get("logicalname"), "logical_name"
-                    )
+                    self._update_port_attr(port, port_info.get("logicalname"), "logical_name")
                     self._update_port_attr(port, port_info.get("serial"), "mac_address")
                     port_info_list.remove(port_info)
                     break
@@ -163,25 +151,18 @@ def _get_lshw_info(self) -> list[LshwOutput]:
         output = self.send_command("lshw -quiet -json -C network", verify=True)
         return json.loads(output.stdout)
 
-    def _update_port_attr(
-        self, port: Port, attr_value: str | None, attr_name: str
-    ) -> None:
+    def _update_port_attr(self, port: Port, attr_value: str | None, attr_name: str) -> None:
         if attr_value:
             setattr(port, attr_name, attr_value)
-            self._logger.debug(
-                f"Found '{attr_name}' of port {port.pci}: '{attr_value}'."
-            )
+            self._logger.debug(f"Found '{attr_name}' of port {port.pci}: '{attr_value}'.")
         else:
             self._logger.warning(
-                f"Attempted to get '{attr_name}' of port {port.pci}, "
-                f"but it doesn't exist."
+                f"Attempted to get '{attr_name}' of port {port.pci}, but it doesn't exist."
             )
 
     def configure_port_state(self, port: Port, enable: bool) -> None:
         state = "up" if enable else "down"
-        self.send_command(
-            f"ip link set dev {port.logical_name} {state}", privileged=True
-        )
+        self.send_command(f"ip link set dev {port.logical_name} {state}", privileged=True)
 
     def configure_port_ip_address(
         self,
dts/framework/remote_session/posix_session.py +8 -22
index 5da0516e05..a29e2e8280 100644
@@ -94,8 +94,7 @@ def extract_remote_tarball(
         expected_dir: str | PurePath | None = None,
     ) -> None:
         self.send_command(
-            f"tar xfm {remote_tarball_path} "
-            f"-C {PurePosixPath(remote_tarball_path).parent}",
+            f"tar xfm {remote_tarball_path} -C {PurePosixPath(remote_tarball_path).parent}",
             60,
         )
         if expected_dir:
@@ -125,8 +124,7 @@ def build_dpdk(
                 self._logger.info("Configuring DPDK build from scratch.")
                 self.remove_remote_dir(remote_dpdk_build_dir)
                 self.send_command(
-                    f"meson setup "
-                    f"{meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
+                    f"meson setup {meson_args} {remote_dpdk_dir} {remote_dpdk_build_dir}",
                     timeout,
                     verify=True,
                     env=env_vars,
@@ -140,9 +138,7 @@ def build_dpdk(
             raise DPDKBuildError(f"DPDK build failed when doing '{e.command}'.")
 
     def get_dpdk_version(self, build_dir: str | PurePath) -> str:
-        out = self.send_command(
-            f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True
-        )
+        out = self.send_command(f"cat {self.join_remote_path(build_dir, 'VERSION')}", verify=True)
         return out.stdout
 
     def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
@@ -156,9 +152,7 @@ def kill_cleanup_dpdk_apps(self, dpdk_prefix_list: Iterable[str]) -> None:
             self._check_dpdk_hugepages(dpdk_runtime_dirs)
             self._remove_dpdk_runtime_dirs(dpdk_runtime_dirs)
 
-    def _get_dpdk_runtime_dirs(
-        self, dpdk_prefix_list: Iterable[str]
-    ) -> list[PurePosixPath]:
+    def _get_dpdk_runtime_dirs(self, dpdk_prefix_list: Iterable[str]) -> list[PurePosixPath]:
         prefix = PurePosixPath("/var", "run", "dpdk")
         if not dpdk_prefix_list:
             remote_prefixes = self._list_remote_dirs(prefix)
@@ -174,9 +168,7 @@ def _list_remote_dirs(self, remote_path: str | PurePath) -> list[str] | None:
         Return a list of directories of the remote_dir.
         If remote_path doesn't exist, return None.
         """
-        out = self.send_command(
-            f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'"
-        ).stdout
+        out = self.send_command(f"ls -l {remote_path} | awk '/^d/ {{print $NF}}'").stdout
         if "No such file or directory" in out:
             return None
         else:
@@ -200,9 +192,7 @@ def _remote_files_exists(self, remote_path: PurePath) -> bool:
         result = self.send_command(f"test -e {remote_path}")
         return not result.return_code
 
-    def _check_dpdk_hugepages(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _check_dpdk_hugepages(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             hugepage_info = PurePosixPath(dpdk_runtime_dir, "hugepage_info")
             if self._remote_files_exists(hugepage_info):
@@ -213,9 +203,7 @@ def _check_dpdk_hugepages(
                     self._logger.warning(out)
                     self._logger.warning("*******************************************")
 
-    def _remove_dpdk_runtime_dirs(
-        self, dpdk_runtime_dirs: Iterable[str | PurePath]
-    ) -> None:
+    def _remove_dpdk_runtime_dirs(self, dpdk_runtime_dirs: Iterable[str | PurePath]) -> None:
         for dpdk_runtime_dir in dpdk_runtime_dirs:
             self.remove_remote_dir(dpdk_runtime_dir)
 
@@ -245,6 +233,4 @@ def get_node_info(self) -> NodeInfo:
             SETTINGS.timeout,
         ).stdout.split("\n")
         kernel_version = self.send_command("uname -r", SETTINGS.timeout).stdout
-        return NodeInfo(
-            os_release_info[0].strip(), os_release_info[1].strip(), kernel_version
-        )
+        return NodeInfo(os_release_info[0].strip(), os_release_info[1].strip(), kernel_version)
dts/framework/remote_session/remote/interactive_remote_session.py +2 -5
index 9085a668e8..098ded1bb0 100644
@@ -73,9 +73,7 @@ def __init__(self, node_config: NodeConfiguration, _logger: DTSLOG) -> None:
             f"Initializing interactive connection for {self.username}@{self.hostname}"
         )
         self._connect()
-        self._logger.info(
-            f"Interactive connection successful for {self.username}@{self.hostname}"
-        )
+        self._logger.info(f"Interactive connection successful for {self.username}@{self.hostname}")
 
     def _connect(self) -> None:
         """Establish a connection to the node.
@@ -108,8 +106,7 @@ def _connect(self) -> None:
                 self._logger.debug(traceback.format_exc())
                 self._logger.warning(e)
                 self._logger.info(
-                    "Retrying interactive session connection: "
-                    f"retry number {retry_attempt +1}"
+                    f"Retrying interactive session connection: retry number {retry_attempt +1}"
                 )
             else:
                 break
dts/framework/remote_session/remote/interactive_shell.py +1 -3
index c24376b2a8..4db19fb9b3 100644
@@ -85,9 +85,7 @@ def __init__(
         self._app_args = app_args
         self._start_application(get_privileged_command)
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """Starts a new interactive application based on the path to the app.
 
         This method is often overridden by subclasses as their process for
dts/framework/remote_session/remote/remote_session.py +2 -6
index 0647d93de4..719f7d1ef7 100644
@@ -96,9 +96,7 @@ def send_command(
         If verify is True, check the return code of the executed command
         and raise a RemoteCommandExecutionError if the command failed.
         """
-        self._logger.info(
-            f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else "")
-        )
+        self._logger.info(f"Sending: '{command}'" + (f" with env vars: '{env}'" if env else ""))
         result = self._send_command(command, timeout, env)
         if verify and result.return_code:
             self._logger.debug(
@@ -112,9 +110,7 @@ def send_command(
         return result
 
     @abstractmethod
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """
         Use the underlying protocol to execute the command using optional env vars
         and return CommandResult.
dts/framework/remote_session/remote/ssh_session.py +4 -12
index 8d127f1601..1a7ee649ab 100644
@@ -80,9 +80,7 @@ def _connect(self) -> None:
                 if error not in errors:
                     errors.append(error)
 
-                self._logger.info(
-                    f"Retrying connection: retry number {retry_attempt + 1}."
-                )
+                self._logger.info(f"Retrying connection: retry number {retry_attempt + 1}.")
 
             else:
                 break
@@ -92,9 +90,7 @@ def _connect(self) -> None:
     def is_alive(self) -> bool:
         return self.session.is_connected
 
-    def _send_command(
-        self, command: str, timeout: float, env: dict | None
-    ) -> CommandResult:
+    def _send_command(self, command: str, timeout: float, env: dict | None) -> CommandResult:
         """Send a command and return the result of the execution.
 
         Args:
@@ -107,9 +103,7 @@ def _send_command(
             SSHTimeoutError: The command execution timed out.
         """
         try:
-            output = self.session.run(
-                command, env=env, warn=True, hide=True, timeout=timeout
-            )
+            output = self.session.run(command, env=env, warn=True, hide=True, timeout=timeout)
 
         except (UnexpectedExit, ThreadException) as e:
             self._logger.exception(e)
@@ -119,9 +113,7 @@ def _send_command(
             self._logger.exception(e)
             raise SSHTimeoutError(command, e.result.stderr) from e
 
-        return CommandResult(
-            self.name, command, output.stdout, output.stderr, output.return_code
-        )
+        return CommandResult(self.name, command, output.stdout, output.stderr, output.return_code)
 
     def copy_from(
         self,
dts/framework/remote_session/remote/testpmd_shell.py +2 -6
index 1455b5a199..08ac311016 100644
@@ -21,13 +21,9 @@ class TestPmdShell(InteractiveShell):
     path: PurePath = PurePath("app", "dpdk-testpmd")
     dpdk_app: bool = True
     _default_prompt: str = "testpmd>"
-    _command_extra_chars: str = (
-        "\n"  # We want to append an extra newline to every command
-    )
+    _command_extra_chars: str = "\n"  # We want to append an extra newline to every command
 
-    def _start_application(
-        self, get_privileged_command: Callable[[str], str] | None
-    ) -> None:
+    def _start_application(self, get_privileged_command: Callable[[str], str] | None) -> None:
         """See "_start_application" in InteractiveShell."""
         self._app_args += " -- -i"
         super()._start_application(get_privileged_command)
dts/framework/settings.py +5 -10
index cfa39d011b..974793a11a 100644
@@ -72,9 +72,8 @@ class _Settings:
 
 def _get_parser() -> argparse.ArgumentParser:
     parser = argparse.ArgumentParser(
-        description="Run DPDK test suites. All options may be specified with "
-        "the environment variables provided in brackets. "
-        "Command line arguments have higher priority.",
+        description="Run DPDK test suites. All options may be specified with the environment "
+        "variables provided in brackets. Command line arguments have higher priority.",
         formatter_class=argparse.ArgumentDefaultsHelpFormatter,
     )
 
@@ -82,8 +81,7 @@ def _get_parser() -> argparse.ArgumentParser:
         "--config-file",
         action=_env_arg("DTS_CFG_FILE"),
         default="conf.yaml",
-        help="[DTS_CFG_FILE] configuration file that describes the test cases, SUTs "
-        "and targets.",
+        help="[DTS_CFG_FILE] configuration file that describes the test cases, SUTs and targets.",
     )
 
     parser.add_argument(
@@ -100,8 +98,7 @@ def _get_parser() -> argparse.ArgumentParser:
         action=_env_arg("DTS_TIMEOUT"),
         default=15,
         type=float,
-        help="[DTS_TIMEOUT] The default timeout for all DTS operations except for "
-        "compiling DPDK.",
+        help="[DTS_TIMEOUT] The default timeout for all DTS operations except for compiling DPDK.",
     )
 
     parser.add_argument(
@@ -170,9 +167,7 @@ def _get_settings() -> _Settings:
         timeout=parsed_args.timeout,
         verbose=(parsed_args.verbose == "Y"),
         skip_setup=(parsed_args.skip_setup == "Y"),
-        dpdk_tarball_path=Path(
-            DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir)
-        )
+        dpdk_tarball_path=Path(DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir))
         if not os.path.exists(parsed_args.tarball)
         else Path(parsed_args.tarball),
         compile_timeout=parsed_args.compile_timeout,
dts/framework/test_result.py +4 -12
index f0fbe80f6f..4c2e7e2418 100644
@@ -83,9 +83,7 @@ def __iadd__(self, other: Result) -> "Statistics":
         """
         self[other.name] += 1
         self["PASS RATE"] = (
-            float(self[Result.PASS.name])
-            * 100
-            / sum(self[result.name] for result in Result)
+            float(self[Result.PASS.name]) * 100 / sum(self[result.name] for result in Result)
         )
         return self
 
@@ -135,9 +133,7 @@ def _get_setup_teardown_errors(self) -> list[Exception]:
 
     def _get_inner_errors(self) -> list[Exception]:
         return [
-            error
-            for inner_result in self._inner_results
-            for error in inner_result.get_errors()
+            error for inner_result in self._inner_results for error in inner_result.get_errors()
         ]
 
     def get_errors(self) -> list[Exception]:
@@ -174,9 +170,7 @@ def add_stats(self, statistics: Statistics) -> None:
         statistics += self.result
 
     def __bool__(self) -> bool:
-        return (
-            bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
-        )
+        return bool(self.setup_result) and bool(self.teardown_result) and bool(self.result)
 
 
 class TestSuiteResult(BaseResult):
@@ -247,9 +241,7 @@ def __init__(self, sut_node: NodeConfiguration):
         super(ExecutionResult, self).__init__()
         self.sut_node = sut_node
 
-    def add_build_target(
-        self, build_target: BuildTargetConfiguration
-    ) -> BuildTargetResult:
+    def add_build_target(self, build_target: BuildTargetConfiguration) -> BuildTargetResult:
         build_target_result = BuildTargetResult(build_target)
         self._inner_results.append(build_target_result)
         return build_target_result
dts/framework/test_suite.py +14 -43

121 lines not on this page · raw message

dts/framework/testbed_model/capturing_traffic_generator.py +2 -5
index ab98987f8e..e6512061d7 100644
@@ -100,8 +100,7 @@ def send_packets_and_capture(
         """
         self._logger.debug(get_packet_summaries(packets))
         self._logger.debug(
-            f"Sending packet on {send_port.logical_name}, "
-            f"receiving on {receive_port.logical_name}."
+            f"Sending packet on {send_port.logical_name}, receiving on {receive_port.logical_name}."
         )
         received_packets = self._send_packets_and_capture(
             packets,
@@ -110,9 +109,7 @@ def send_packets_and_capture(
             duration,
         )
 
-        self._logger.debug(
-            f"Received packets: {get_packet_summaries(received_packets)}"
-        )
+        self._logger.debug(f"Received packets: {get_packet_summaries(received_packets)}")
         self._write_capture_from_packets(capture_name, received_packets)
         return received_packets
 
dts/framework/testbed_model/hw/cpu.py +5 -15
index d1918a12dc..cbc5fe7fff 100644
@@ -54,9 +54,7 @@ def __init__(self, lcore_list: list[int] | list[str] | list[LogicalCore] | str):
 
         # the input lcores may not be sorted
         self._lcore_list.sort()
-        self._lcore_str = (
-            f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
-        )
+        self._lcore_str = f'{",".join(self._get_consecutive_lcores_range(self._lcore_list))}'
 
     @property
     def lcore_list(self) -> list[int]:
@@ -70,15 +68,11 @@ def _get_consecutive_lcores_range(self, lcore_ids_list: list[int]) -> list[str]:
                 segment.append(lcore_id)
             else:
                 formatted_core_list.append(
-                    f"{segment[0]}-{segment[-1]}"
-                    if len(segment) > 1
-                    else f"{segment[0]}"
+                    f"{segment[0]}-{segment[-1]}" if len(segment) > 1 else f"{segment[0]}"
                 )
                 current_core_index = lcore_ids_list.index(lcore_id)
                 formatted_core_list.extend(
-                    self._get_consecutive_lcores_range(
-                        lcore_ids_list[current_core_index:]
-                    )
+                    self._get_consecutive_lcores_range(lcore_ids_list[current_core_index:])
                 )
                 segment.clear()
                 break
@@ -125,9 +119,7 @@ def __init__(
         self._filter_specifier = filter_specifier
 
         # sorting by core is needed in case hyperthreading is enabled
-        self._lcores_to_filter = sorted(
-            lcore_list, key=lambda x: x.core, reverse=not ascending
-        )
+        self._lcores_to_filter = sorted(lcore_list, key=lambda x: x.core, reverse=not ascending)
         self.filter()
 
     @abstractmethod
@@ -220,9 +212,7 @@ def _filter_cores_from_socket(
                 else:
                     # we have enough lcores per this core
                     continue
-            elif self._filter_specifier.cores_per_socket > len(
-                lcore_count_per_core_map
-            ):
+            elif self._filter_specifier.cores_per_socket > len(lcore_count_per_core_map):
                 # only add cores if we need more
                 lcore_count_per_core_map[lcore.core] = 1
                 filtered_lcores.append(lcore)
dts/framework/testbed_model/node.py +2 -6
index fc01e0bf8e..ef700d8114 100644
@@ -103,18 +103,14 @@ def _tear_down_execution(self) -> None:
         is not decorated so that the derived class doesn't have to use the decorator.
         """
 
-    def set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Perform the build target setup that will be done for each build target
         tested on this node.
         """
         self._set_up_build_target(build_target_config)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         This method exists to be optionally overwritten by derived classes and
         is not decorated so that the derived class doesn't have to use the decorator.
dts/framework/testbed_model/scapy.py +5 -14
index af0d4dbb25..9083e92b3d 100644
@@ -96,9 +96,7 @@ def scapy_send_packets_and_capture(
     return [scapy_packet.build() for scapy_packet in sniffer.stop(join=True)]
 
 
-def scapy_send_packets(
-    xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str
-) -> None:
+def scapy_send_packets(xmlrpc_packets: list[xmlrpc.client.Binary], send_iface: str) -> None:
     """RPC function to send packets.
 
     The function is meant to be executed on the remote TG node.
@@ -197,9 +195,7 @@ class ScapyTrafficGenerator(CapturingTrafficGenerator):
     def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._config = config
         self._tg_node = tg_node
-        self._logger = getLogger(
-            f"{self._tg_node.name} {self._config.traffic_generator_type}"
-        )
+        self._logger = getLogger(f"{self._tg_node.name} {self._config.traffic_generator_type}")
 
         assert (
             self._tg_node.config.os == OS.linux
@@ -218,9 +214,7 @@ def __init__(self, tg_node: TGNode, config: ScapyTrafficGeneratorConfig):
         self._start_xmlrpc_server_in_remote_python(xmlrpc_server_listen_port)
 
         # connect to the server
-        server_url = (
-            f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
-        )
+        server_url = f"http://{self._tg_node.config.hostname}:{xmlrpc_server_listen_port}"
         self.rpc_server_proxy = xmlrpc.client.ServerProxy(
             server_url, allow_none=True, verbose=SETTINGS.verbose
         )
@@ -240,17 +234,14 @@ def _start_xmlrpc_server_in_remote_python(self, listen_port: int):
         src = inspect.getsource(QuittableXMLRPCServer)
         # Lines with only whitespace break the repl if in the middle of a function
         # or class, so strip all lines containing only whitespace
-        src = "\n".join(
-            [line for line in src.splitlines() if not line.isspace() and line != ""]
-        )
+        src = "\n".join([line for line in src.splitlines() if not line.isspace() and line != ""])
 
         spacing = "\n" * 4
 
         # execute it in the python terminal
         self.session.send_command(spacing + src + spacing)
         self.session.send_command(
-            f"server = QuittableXMLRPCServer(('0.0.0.0', {listen_port}));"
-            f"server.serve_forever()",
+            f"server = QuittableXMLRPCServer(('0.0.0.0', {listen_port}));server.serve_forever()",
             "XMLRPC OK",
         )
 
dts/framework/testbed_model/sut_node.py +11 -29
index 4161d3a4d5..7f75043bd3 100644
@@ -131,9 +131,7 @@ def remote_dpdk_build_dir(self) -> PurePath:
     @property
     def dpdk_version(self) -> str:
         if self._dpdk_version is None:
-            self._dpdk_version = self.main_session.get_dpdk_version(
-                self._remote_dpdk_dir
-            )
+            self._dpdk_version = self.main_session.get_dpdk_version(self._remote_dpdk_dir)
         return self._dpdk_version
 
     @property
@@ -151,8 +149,7 @@ def compiler_version(self) -> str:
                 )
             else:
                 self._logger.warning(
-                    "Failed to get compiler version because"
-                    "_build_target_config is None."
+                    "Failed to get compiler version because _build_target_config is None."
                 )
                 return ""
         return self._compiler_version
@@ -173,9 +170,7 @@ def get_build_target_info(self) -> BuildTargetInfo:
     def _guess_dpdk_remote_dir(self) -> PurePath:
         return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir)
 
-    def _set_up_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Setup DPDK on the SUT node.
         """
@@ -195,23 +190,18 @@ def _tear_down_build_target(self) -> None:
         """
         self.bind_ports_to_driver(for_dpdk=False)
 
-    def _configure_build_target(
-        self, build_target_config: BuildTargetConfiguration
-    ) -> None:
+    def _configure_build_target(self, build_target_config: BuildTargetConfiguration) -> None:
         """
         Populate common environment variables and set build target config.
         """
         self._env_vars = {}
         self._build_target_config = build_target_config
-        self._env_vars.update(
-            self.main_session.get_dpdk_build_env_vars(build_target_config.arch)
-        )
+        self._env_vars.update(self.main_session.get_dpdk_build_env_vars(build_target_config.arch))
         self._env_vars["CC"] = build_target_config.compiler.name
         if build_target_config.compiler_wrapper:
             self._env_vars["CC"] = (
-                f"'{build_target_config.compiler_wrapper} "
-                f"{build_target_config.compiler.name}'"
-            )
+                f"'{build_target_config.compiler_wrapper} {build_target_config.compiler.name}'"
+            )  # fmt: skip
 
     @Node.skip_setup
     def _copy_dpdk_tarball(self) -> None:
@@ -242,9 +232,7 @@ def _copy_dpdk_tarball(self) -> None:
         self.main_session.remove_remote_dir(self._remote_dpdk_dir)
 
         # then extract to remote path
-        self.main_session.extract_remote_tarball(
-            remote_tarball_path, self._remote_dpdk_dir
-        )
+        self.main_session.extract_remote_tarball(remote_tarball_path, self._remote_dpdk_dir)
 
     @Node.skip_setup
     def _build_dpdk(self) -> None:
@@ -281,9 +269,7 @@ def build_dpdk_app(self, app_name: str, **meson_dpdk_args: str | bool) -> PurePa
         )
 
         if app_name == "all":
-            return self.main_session.join_remote_path(
-                self.remote_dpdk_build_dir, "examples"
-            )
+            return self.main_session.join_remote_path(self.remote_dpdk_build_dir, "examples")
         return self.main_session.join_remote_path(
             self.remote_dpdk_build_dir, "examples", f"dpdk-{app_name}"
         )
@@ -337,9 +323,7 @@ def create_eal_parameters(
                 '-c 0xf -a 0000:88:00.0 --file-prefix=dpdk_1112_20190809143420';
         """
 
-        lcore_list = LogicalCoreList(
-            self.filter_lcores(lcore_filter_specifier, ascending_cores)
-        )
+        lcore_list = LogicalCoreList(self.filter_lcores(lcore_filter_specifier, ascending_cores))
 
         if append_prefix_timestamp:
             prefix = f"{prefix}_{self._dpdk_timestamp}"
@@ -404,9 +388,7 @@ def create_interactive_shell(
                 self.remote_dpdk_build_dir, shell_cls.path
             )
 
-        return super().create_interactive_shell(
-            shell_cls, timeout, privileged, str(eal_parameters)
-        )
+        return super().create_interactive_shell(shell_cls, timeout, privileged, str(eal_parameters))
 
     def bind_ports_to_driver(self, for_dpdk: bool = True) -> None:
         """Bind all ports on the SUT to a driver.
dts/framework/testbed_model/tg_node.py +2 -5
index 27025cfa31..79a55663b5 100644
@@ -45,9 +45,7 @@ class TGNode(Node):
 
     def __init__(self, node_config: TGNodeConfiguration):
         super(TGNode, self).__init__(node_config)
-        self.traffic_generator = create_traffic_generator(
-            self, node_config.traffic_generator
-        )
+        self.traffic_generator = create_traffic_generator(self, node_config.traffic_generator)
         self._logger.info(f"Created node: {self.name}")
 
     def send_packet_and_capture(
@@ -94,6 +92,5 @@ def create_traffic_generator(
             return ScapyTrafficGenerator(tg_node, traffic_generator_config)
         case _:
             raise ConfigurationError(
-                "Unknown traffic generator: "
-                f"{traffic_generator_config.traffic_generator_type}"
+                f"Unknown traffic generator: {traffic_generator_config.traffic_generator_type}"
             )
dts/framework/utils.py +5 -15
index d27c2c5b5f..d098d364ff 100644
@@ -19,9 +19,7 @@
 
 class StrEnum(Enum):
     @staticmethod
-    def _generate_next_value_(
-        name: str, start: int, count: int, last_values: object
-    ) -> str:
+    def _generate_next_value_(name: str, start: int, count: int, last_values: object) -> str:
         return name
 
     def __str__(self) -> str:
@@ -32,9 +30,7 @@ def __str__(self) -> str:
 
 
 def check_dts_python_version() -> None:
-    if sys.version_info.major < 3 or (
-        sys.version_info.major == 3 and sys.version_info.minor < 10
-    ):
+    if sys.version_info.major < 3 or (sys.version_info.major == 3 and sys.version_info.minor < 10):
         print(
             RED(
                 (
@@ -60,9 +56,7 @@ def expand_range(range_str: str) -> list[int]:
         range_boundaries = range_str.split("-")
         # will throw an exception when items in range_boundaries can't be converted,
         # serving as type check
-        expanded_range.extend(
-            range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1)
-        )
+        expanded_range.extend(range(int(range_boundaries[0]), int(range_boundaries[-1]) + 1))
 
     return expanded_range
 
@@ -71,9 +65,7 @@ def get_packet_summaries(packets: list[Packet]):
     if len(packets) == 1:
         packet_summaries = packets[0].summary()
     else:
-        packet_summaries = json.dumps(
-            list(map(lambda pkt: pkt.summary(), packets)), indent=4
-        )
+        packet_summaries = json.dumps(list(map(lambda pkt: pkt.summary(), packets)), indent=4)
     return f"Packet contents: \n{packet_summaries}"
 
 
@@ -94,9 +86,7 @@ class MesonArgs(object):
     _default_library: str
 
     def __init__(self, default_library: str | None = None, **dpdk_args: str | bool):
-        self._default_library = (
-            f"--default-library={default_library}" if default_library else ""
-        )
+        self._default_library = f"--default-library={default_library}" if default_library else ""
         self._dpdk_args = " ".join(
             (
                 f"-D{dpdk_arg_name}={dpdk_arg_value}"
dts/tests/TestSuite_hello_world.py +1 -3
index 7e3d95c0cf..768ba1cfa8 100644
@@ -34,9 +34,7 @@ def test_hello_world_single_core(self) -> None:
         # get the first usable core
         lcore_amount = LogicalCoreCount(1, 1, 1)
         lcores = LogicalCoreCountFilter(self.sut_node.lcores, lcore_amount).filter()
-        eal_para = self.sut_node.create_eal_parameters(
-            lcore_filter_specifier=lcore_amount
-        )
+        eal_para = self.sut_node.create_eal_parameters(lcore_filter_specifier=lcore_amount)
         result = self.sut_node.run_dpdk_app(self.app_helloworld_path, eal_para)
         self.verify(
             f"hello from core {int(lcores[0])}" in result.stdout,
dts/tests/TestSuite_smoke_tests.py +3 -8
index e8016d1b54..8958f58dac 100644
@@ -45,13 +45,10 @@ def test_driver_tests(self) -> None:
         for dev in self.sut_node.virtual_devices:
             vdev_args += f"--vdev {dev} "
         vdev_args = vdev_args[:-1]
-        driver_tests_command = (
-            f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
-        )
+        driver_tests_command = f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests"
         if vdev_args:
             self._logger.info(
-                "Running driver tests with the following virtual "
-                f"devices: {vdev_args}"
+                f"Running driver tests with the following virtual devices: {vdev_args}"
             )
             driver_tests_command += f' --test-args "{vdev_args}"'
 
@@ -67,9 +64,7 @@ def test_devices_listed_in_testpmd(self) -> None:
         Test:
             Uses testpmd driver to verify that devices have been found by testpmd.
         """
-        testpmd_driver = self.sut_node.create_interactive_shell(
-            TestPmdShell, privileged=True
-        )
+        testpmd_driver = self.sut_node.create_interactive_shell(TestPmdShell, privileged=True)
         dev_list = [str(x) for x in testpmd_driver.get_devices()]
         for nic in self.nics_in_node:
             self.verify(
Signature · 1 line
2.34.1
#29 lore raw

Re: [PATCH v6 2/2] dts: reformat to 100 line length

20/11/2023 13:36, Juraj Linkeš:

Quoted 5 lines

Reformat to 100 from the previous 88 to unify with C recommendations.

The C recommendation is the maximum with the ideal being 80. The Python tools are not suitable for this flexibility.

Quoted 7 lines

We require all patches with DTS code to be validated with the devtools/dts-check-format.sh script, part of which is the black formatting tool. We've set up black to format all of the codebase and the reformat is needed so that future submitters are not affected.

In general, I don't like doing large cosmetic changes, but it looks mandatory to allow automatic formatting with black.

Applied, thanks.

Note that my pylama is still emitting warning when it goes longer than 79. It may be a problem in my environment but something to check. By the way, why are we using pylama in the script
instead of directly calling the linters we are interested in?

#30 lore raw

Re: [PATCH v6 2/2] dts: reformat to 100 line length

Quoted 18 lines · Thomas Monjalon

20/11/2023 13:36, Juraj Linkeš:

Quoted 5 lines

Reformat to 100 from the previous 88 to unify with C recommendations.

The C recommendation is the maximum with the ideal being 80. The Python tools are not suitable for this flexibility.

Quoted 7 lines

We require all patches with DTS code to be validated with the devtools/dts-check-format.sh script, part of which is the black formatting tool. We've set up black to format all of the codebase and the reformat is needed so that future submitters are not affected.

In general, I don't like doing large cosmetic changes, but it looks mandatory to allow automatic formatting with black.

Quoted 7 lines

Applied, thanks.

Note that my pylama is still emitting warning when it goes longer than 79. It may be a problem in my environment but something to check. By the way, why are we using pylama in the script
instead of directly calling the linters we are interested in?

This is a good point. It's mainly a little bit of convenience, as it's easier to run just one tool instead of multiples (and possibly different config files). But seeing as Pylama doesn't seem to be maintained well (it doesn't work with mypy properly and there are issues with pydocstyle as well), we may eschew it and go with running the linters individually - I'll note this for the future.

Quoted 2 lines
#31 lore raw

Re: [PATCH v4 1/2] doc: increase python max line length to 100

In reply to Juraj Linkeš
Quoted 5 lines · On Fri, 13 Oct 2023 09:58:04 +0200 Juraj Linkeš <[email protected]>…

Unify with C recommendations which allow line length of up to 100 characters.

Quoted 7 lines
---
 .editorconfig                            | 2 +-
 doc/doc_build/meson-private/meson.lock   | 0
 doc/guides/contributing/coding_style.rst | 1 +
 dts/pyproject.toml                       | 4 ++--
 4 files changed, 4 insertions(+), 3 deletions(-)
 create mode 100644 doc/doc_build/meson-private/meson.loc

Look like meson.lock snuck into this patchset.
Assume that was a mistake.

#32 lore raw

Re: [PATCH v4 1/2] doc: increase python max line length to 100

Quoted 17 lines · Stephen Hemminger
Quoted 5 lines · On Fri, 13 Oct 2023 09:58:04 +0200 Juraj Linkeš <[email protected]>…

Unify with C recommendations which allow line length of up to 100 characters.

Quoted 7 lines
---
 .editorconfig                            | 2 +-
 doc/doc_build/meson-private/meson.lock   | 0
 doc/guides/contributing/coding_style.rst | 1 +
 dts/pyproject.toml                       | 4 ++--
 4 files changed, 4 insertions(+), 3 deletions(-)
 create mode 100644 doc/doc_build/meson-private/meson.loc
Quoted 2 lines

Look like meson.lock snuck into this patchset.
Assume that was a mistake.

My bad, let me send a fix.

#33 lore raw

Re: [PATCH v3 1/2] doc: increase python max line length to 100

In reply to Juraj Linkeš
Quoted 34 lines · Juraj Linkeš

Unify with C recommendations which allow line length of up to 100 characters.

---
  .editorconfig                            | 2 +-
  doc/doc_build/meson-private/meson.lock   | 0
  doc/guides/contributing/coding_style.rst | 3 +++
  dts/pyproject.toml                       | 4 ++--
  4 files changed, 6 insertions(+), 3 deletions(-)

create mode 100644 doc/doc_build/meson-private/meson.lock

.editorconfig +1 -1
index ab41c95085..1e7d74213f 100644
@@ -16,7 +16,7 @@ max_line_length = 100
  [*.py]
  indent_style = space
  indent_size = 4
-max_line_length = 79
+max_line_length = 100
 
  [meson.build]
  indent_style = space
doc/doc_build/meson-private/meson.lock new file +0 -0
new file mode 100644
index 0000000000..e69de29bb2
doc/guides/contributing/coding_style.rst +0 -0
index 648849899d..a42cd3d58d 100644

doc/guides/contributing/coding_style.rst All Python code should be compliant with · line 885

Quoted 6 lines
doc/guides/contributing/coding_style.rst +3 -0
@@ -880,6 +880,9 @@ All Python code should be compliant with
  `PEP8 (Style Guide for Python Code) <https://www.python.org/dev/peps/pep-0008/>`_.
 
  The ``pep8`` tool can be used for testing compliance with the guidelines.
+Note that line lengths are acceptable up to 100 characters, which is in line with C recommendations.
+
+..

Presumably the bare ".." is some accidental leftover markup.

Quoted 17 lines
doc/guides/contributing/coding_style.rst +0 -0
  Integrating with the Build System
  ---------------------------------
dts/pyproject.toml +1 -1
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
  [tool.pylama]
  linters = "mccabe,pycodestyle,pyflakes"
  format = "pylint"
-max_line_length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+max_line_length = 100
 
  [tool.mypy]
  python_version = "3.10"

dts/pyproject.toml profile = "black" · line 58

Quoted 5 lines
dts/pyproject.toml +1 -1
@@ -55,4 +55,4 @@ profile = "black"
  [tool.black]
  target-version = ['py310']
  include = '\.pyi?$'
-line-length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length = 100

The rest looks good. Wholeheartedly support longer line length.

#34 lore raw

Re: [PATCH v3 1/2] doc: increase python max line length to 100

Quoted 39 lines · Paul Szczepanek
Quoted 36 lines · Juraj Linkeš

Unify with C recommendations which allow line length of up to 100 characters.

---
  .editorconfig                            | 2 +-
  doc/doc_build/meson-private/meson.lock   | 0
  doc/guides/contributing/coding_style.rst | 3 +++
  dts/pyproject.toml                       | 4 ++--
  4 files changed, 6 insertions(+), 3 deletions(-)

create mode 100644 doc/doc_build/meson-private/meson.lock

.editorconfig +1 -1
index ab41c95085..1e7d74213f 100644
@@ -16,7 +16,7 @@ max_line_length = 100
  [*.py]
  indent_style = space
  indent_size = 4
-max_line_length = 79
+max_line_length = 100
 
  [meson.build]
  indent_style = space
doc/doc_build/meson-private/meson.lock new file +0 -0
new file mode 100644
index 0000000000..e69de29bb2
doc/guides/contributing/coding_style.rst +0 -0
index 648849899d..a42cd3d58d 100644
@@ -880,6 +880,9 @@ All Python code should be compliant with
  `PEP8 (Style Guide for Python Code) <https://www.python.org/dev/peps/pep-0008/>`_.
 
Quoted 7 lines

doc/guides/contributing/coding_style.rst All Python code should be compliant with · line 885

Quoted 4 lines
doc/guides/contributing/coding_style.rst +3 -0
  The ``pep8`` tool can be used for testing compliance with the guidelines.
+Note that line lengths are acceptable up to 100 characters, which is in line with C recommendations.
+
+..

Presumably the bare ".." is some accidental leftover markup.

I'll fix this in the next version.

Quoted 15 lines
Quoted 15 lines
doc/guides/contributing/coding_style.rst +0 -0
  Integrating with the Build System
  ---------------------------------
dts/pyproject.toml +1 -1
index 6762edfa6b..980ac3c7db 100644
@@ -41,7 +41,7 @@ build-backend = "poetry.core.masonry.api"
  [tool.pylama]
  linters = "mccabe,pycodestyle,pyflakes"
  format = "pylint"
-max_line_length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+max_line_length = 100
 
Quoted 11 lines

dts/pyproject.toml profile = "black" · line 58

Quoted 8 lines
dts/pyproject.toml +1 -1
  [tool.mypy]
  python_version = "3.10"
@@ -55,4 +55,4 @@ profile = "black"
  [tool.black]
  target-version = ['py310']
  include = '\.pyi?$'
-line-length = 88 # https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#line-length
+line-length = 100

The rest looks good. Wholeheartedly support longer line length.

Thanks, please send your ack's in the new version.

Quoted 1 line
#35 lore raw
In reply to Juraj Linkeš

Adding folks I forgot to add.

Quoted 23 lines

-----Original Message-----
From: Juraj Linkeš <[email protected]>
Sent: Thursday, November 3, 2022 2:29 PM
Cc: [email protected]; Juraj Linkeš <[email protected]>
Subject: [PATCH v1 0/2] python gitignore and line length

These two config options/preferences are relevant to DTS, but not only to DTS and need to be discussed separately, as they affect all Python code in DPDK.

Juraj Linkeš (2):
git: ignore standard python files
doc: increase python max line to 88

 .editorconfig                            | 2 +-
 .gitignore                               | 6 ++++--
 doc/doc_build/meson-private/meson.lock   | 0
 doc/guides/contributing/coding_style.rst | 8 +++++++-
 4 files changed, 12 insertions(+), 4 deletions(-)  create mode 100644

doc/doc_build/meson-private/meson.lock

--
2.30.2