Why my image isn't boot?

U-Boot-Users Zhao Hongda 1 participant 1 message Apr 9, 2003

lore

Share & tools

lore

Zhao Hongda

author

2003-04-09 03:44 UTC #0 lore raw

How poor I am,
I am just have a JTAG cable and a RS232 cable connect to lubbock, then what should I do?
Hongda Zhao

Quoted 39 lines

----- Original Message -----
From: "Wolfgang Denk" <[email protected]>
To: "Zhao Hongda" <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, April 08, 2003 5:30 AM
Subject: Re: [U-Boot-Users] Why my image isn't boot?
Quoted 6 lines
Quoted 5 lines · In message <00af01c2fe45$e8dab100$fe02a8c0@esd11> you wrote:
I use the u-boot cvs source,
linux-2.4.19 kernel, arm-linux patch, and xscale patch. arm-linux-gcc 3.0 as complier,lubbock(pxa250) as platform.
arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux
linux.bin
Quoted 2 lines
Quoted 2 lines
gzip -9 linux.bin
mkimage -A arm -O linux -T kernel -C gzip -a 0xa0008000 -e
0xa0008000 -n
Quoted 20 lines
Quoted 8 lines
"Linux Kernel Image" -d linux.bin.gz uImage
then under u-boot:
    =>loadb 0xa0008000 (send the uImage)
    =>go 0xa0008000
    start the application at 0xa0008000
    <hang>
Could someone help me about this? Thanks a lot.
Type "where" and "bt" at your GDB prompt. Umm... you are using a debugger like the BDI2000, aren't you?
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Schshschshchsch.
-- The Gorn, "Arena", stardate 3046.2