Skip to contentSkip to conversation

2.4.0-prerelease: System dies after leaving XF86_4.0.2

DISCUSSION Norbert Breun 2 participants 3 messages Jan 4, 2001

lore
Share & tools
lore
#0 lore raw

Hallo,

I've tested 2.4.0prerelease pure - ac1-ac2-ac3-ac4-ac5 and my system crashed whenever I left X.
Having switched back to 2.4.0-test13pre7 all is fine.
I'm no developer, so if you need more information, give me some hints.

kind regards
Norbert
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 4 lines

I've tested 2.4.0prerelease pure - ac1-ac2-ac3-ac4-ac5 and my system crashed whenever I left X.
Having switched back to 2.4.0-test13pre7 all is fine.
I'm no developer, so if you need more information, give me some hints.

What video card do you have and are you using AGP or DRM (an lsmod will tell you)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw

Allan,

my graphic card is a matrox 1- video card is a haupauge/model618pci , no AGP or DRM. The output of ver_linux + lsmod below. There has to be significant change from test13pre7 to prerelease ff. There is an immediate standstill, nothing in /var/log/messages or /var/log/warn.

kind regards
Norbert

-- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux nmb 2.4.0-test12 #1 SMP Thu Jan 4 04:56:00 CET 2001 i586 unknown

Kernel modules         2.3.24
Gnu C                  2.95.2
Gnu Make               3.79.1
Binutils               2.9.5.0.24
Linux C Library        x   1 root     root      4070534 Sep  5 18:07 
/lib/libc.so.6
Dynamic linker         ldd (GNU libc) 2.1.3
Procps                 2.0.6
Mount                  2.10m
Net-tools              1.56
Kbd                    0.99
Sh-utils               2.0
Modules Loaded         ppp_deflate bsd_comp ppp_async ppp_generic tuner 

tvaudio msp3400 bttv videodev i2c-algo-bit i2c-core pnp emu8k opl3 sb uart401 midi soundbase sndshield ipv6 8139too serial

===================================================================
nmb:~ # lsmod
Module Size Used by

ppp_deflate            39616   0  (autoclean)
bsd_comp                4256   0  (autoclean)
ppp_async               6608   0  (autoclean)
ppp_generic            15456   0  (autoclean) [ppp_deflate bsd_comp ppp_async]
tuner                   3248   1  (autoclean)
tvaudio                 7936   0  (autoclean) (unused)
msp3400                13392   1  (autoclean)
bttv                   56112   1  (autoclean)
videodev                4864   4  (autoclean) [bttv]
i2c-algo-bit            7232   1  (autoclean) [bttv]
i2c-core               13136   0  (autoclean) [tuner tvaudio msp3400 bttv 
i2c-algo-bit]
pnp                    50096   3 
emu8k                  40128   3 
opl3                   14496   3 
sb                     35232   3 
uart401                 8000   3  [sb]
midi                   30224   3  [pnp emu8k opl3 sb uart401]
soundbase             314688   3  [pnp emu8k opl3 sb uart401 midi]
sndshield              10336   0  [pnp emu8k opl3 sb uart401 midi soundbase]
ipv6                  147280  -1  (autoclean)
8139too                15712   1  (autoclean)
serial                 43056   0  (autoclean)

==================================================================================

Quoted 11 lines · Alan Cox
Quoted 4 lines

I've tested 2.4.0prerelease pure - ac1-ac2-ac3-ac4-ac5 and my system crashed whenever I left X.
Having switched back to 2.4.0-test13pre7 all is fine.
I'm no developer, so if you need more information, give me some hints.

What video card do you have and are you using AGP or DRM (an lsmod will tell you)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/