Skip to contentSkip to conversation

Problems with 2.4.2-pre1 & reiser & vfs

DISCUSSION Andrius Adomaitis 3 participants 3 messages Feb 8, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I have dual PIII 800 machine running as mail server on DAC 960 RAID & reiserfs comming with 2.4.1kernel.

Under very high loads I get following messages in my kernel log:

kernel: vs-13060: reiserfs_update_sd: stat data of object [7906789 7906806 0x0 SD](nlink == 1) not found (pos 23)
kernel: vs-13060: reiserfs_update_sd: stat data of object [7906789 7906806 0x0 SD] (nlink == 1) not found (pos 23)
kernel: PAP-5660: reiserfs_do_truncate: wrong result -1 of search for [7906789 7906806 0xfffffffffffffff DIRECT]
kernel: vs-13060: reiserfs_update_sd: stat data of object [7906789 7906806 0x0 SD] (nlink == 1) not found (pos 23)
kernel: PAP-5660: reiserfs_do_truncate: wrong result -1 of search for [7906789 7906806 0xfffffffffffffff DIRECT]
.....

and afterwards come these:

kernel: vs-3050: wait_buffer_until_released: nobody releases buffer (dev 30:09, size 4096, blocknr 1661732, count 16,
kernel: vs-3050: wait_buffer_until_released: nobody releases buffer (dev 30:09, size 4096, blocknr 1661732, count 16,
...
and so on.

The interesting thing is that system is still operational, but load jumps up to 260 or so, and any attempts to reboot system fail. ps aux shows that there exists imortal (kill -9 $PID doesn't kill it) qmail process that consumes 97% of one CPU's resources. Also vmstat shows tons of processes in uninterruptable sleep, but free reports that it is still enough memory (no swap used) and huge buffers... Machine gets slugish but works for a while (0.5-2h dependent on mail request rate).

System is Debian potato,
gcc version 2.95.2 20000220 (Debian GNU/Linux),
reiserfs utils 3.6.25.

Any patches or suggestions to fix that would be appreciated...

P.S. Also I thought wouldn't it be good to have some sysctl entry in proc that rebooted machine dependent on the value in control file when proper software reboot is impossible (like in situation described above)? Or probably there already exist(s) such thing(s)?

Thanks.

Signature · 6 lines
Andrius
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#1 lore raw
Quoted 8 lines · On Thursday, February 08, 2001 04:00:26 PM +0100 Andrius Adomaitis…

Hello,

I have dual PIII 800 machine running as mail server on DAC 960 RAID & reiserfs comming with 2.4.1kernel.

Under very high loads I get following messages in my kernel log:

Quoted 11 lines

kernel: vs-13060: reiserfs_update_sd: stat data of object [7906789 7906806 0x0 SD](nlink == 1) not found (pos 23)
kernel: vs-13060: reiserfs_update_sd: stat data of object [7906789 7906806 0x0 SD] (nlink == 1) not found (pos 23)
kernel: PAP-5660: reiserfs_do_truncate: wrong result -1 of search for [7906789 7906806 0xfffffffffffffff DIRECT]
kernel: vs-13060: reiserfs_update_sd: stat data of object [7906789 7906806 0x0 SD] (nlink == 1) not found (pos 23)
kernel: PAP-5660: reiserfs_do_truncate: wrong result -1 of search for [7906789 7906806 0xfffffffffffffff DIRECT]
.....

These aren't good at all, and show a general corruption problem. I know the ac kernels have at least one small DAC960 bug fixes, are there other fixes pending?

Quoted 10 lines

and afterwards come these:

kernel: vs-3050: wait_buffer_until_released: nobody releases buffer (dev 30:09, size 4096, blocknr 1661732, count 16,
kernel: vs-3050: wait_buffer_until_released: nobody releases buffer (dev 30:09, size 4096, blocknr 1661732, count 16,
...
and so on.

There is more info in this message, it would help if you could send the entire line.

Quoted 8 lines

The interesting thing is that system is still operational, but load jumps up to 260 or so, and any attempts to reboot system fail. ps aux shows that there exists imortal (kill -9 $PID doesn't kill it) qmail process that consumes 97% of one CPU's resources. Also vmstat shows tons of processes in uninterruptable sleep, but free reports that it is still enough memory (no swap used) and huge buffers... Machine gets slugish but works for a while (0.5-2h dependent on mail request rate).

Once you get a vs-3050, any process that tries to change the FS ends up waiting on the journal, which is waiting on the process stuck in vs-3050. There is no escape.

-chris

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 6 lines
Quoted 3 lines

kernel: PAP-5660: reiserfs_do_truncate: wrong result -1 of search for [7906789 7906806 0xfffffffffffffff DIRECT]
.....

These aren't good at all, and show a general corruption problem. I know the ac kernels have at least one small DAC960 bug fixes, are there other fixes pending?

The dac960 changes relate to gcc 2.96 stuff and wouldnt account for real bugs. DAC960 built with cvs gcc or 2.96 < 2.96-74 or so could do because of the ABI thing but wouldnt boot that far. If its straight 2.4.1 suspect the elevator corruption thing too

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/