Skip to contentSkip to conversation

PROBLEM: mount -o loop of ISO image lockup

DISCUSSION Fabrizio Ammollo 3 participants 4 messages Feb 23, 2001

lore
Share & tools
lore
#0 lore raw

[1.] mount -o loop of ISO image lockup
[2.] mount of an ISO image created with mkisofs and correctly read and verified by isoread and isovrfy locks ; nothing is reported my mount, and it is unkillable ; the line is reported by ps this way:

root 4378 0.0 0.5 1508 1508 pts/12 DL 13:17 0:00 mount -o loop
-t iso9660 image.iso /mnt/cdrom/

[3.] kernel, mount, loop, iso9660
[4.] 2.4.2
[5.] N/A
[6.] mount -o loop -t iso9660 image.iso /mnt/cdrom/
[7.]
[7.1.]
-- Versions installed: (if some fields are empty or look -- unusual then possibly you have very old versions) Linux f-ammollo 2.4.2 #12 Thu Feb 22 11:11:08 CET 2001 i686 unknown

Kernel modules         2.3.21
Gnu C                  2.96
Gnu Make               3.79.1
Binutils               2.10.0.18
Linux C Library        > libc.2.2
Dynamic linker         ldd (GNU libc) 2.2
Procps                 2.0.7
Mount                  2.10m
Net-tools              1.56
Console-tools          0.3.3
Sh-utils               2.0
Modules Loaded         loop mad16 ad1848 uart401 sound soundcore 

nls_iso8859-1 nls_cp437 vfat fat 3c59x
[7.2.]
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Celeron (Covington)
stepping : 1
cpu MHz : 300.689
cache size : 32 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr
bogomips : 599.65
[7.3.]

loop                    7552   2 (autoclean)
mad16                   7904   0 (autoclean)
ad1848                 17376   0 (autoclean) [mad16]
uart401                 6320   0 (autoclean) [mad16]
sound                  57200   0 (autoclean) [mad16 ad1848 uart401]
soundcore               3760   4 (autoclean) [sound]
nls_iso8859-1           2864   1 (autoclean)
nls_cp437               4384   1 (autoclean)
vfat                   11248   1 (autoclean)
fat                    31104   0 (autoclean) [vfat]
3c59x                  23424   1 (autoclean)

[7.4.]
/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0530-0533 : MAD16 WSS config
0534-0537 : MAD16 WSS
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
d000-dfff : PCI Bus #01
e000-e01f : Intel Corporation 82371AB PIIX4 USB
e400-e43f : 3Com Corporation 3c900 10BaseT [Boomerang]
e400-e43f : eth0
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0fffffff : System RAM
00100000-001be14d : Kernel code
001be14e-001fffef : Kernel data
d0000000-dfffffff : Intel Corporation 440LX/EX - 82443LX/EX Host bridge e8000000-efffffff : PCI Bus #01
e8000000-ebffffff : S3 Inc. Trio 64 3D
ffff0000-ffffffff : reserved
[7.5.]
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev
03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-

	Latency: 64
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev
03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: e8000000-efffffff
	Prefetchable memory behind bridge: fff00000-000fffff
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0

00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

	Latency: 64
	Region 4: I/O ports at f000 [size=16]

00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

	Latency: 64
	Interrupt: pin D routed to IRQ 0
	Region 4: I/O ports at e000 [size=32]

00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

00:09.0 Ethernet controller: 3Com Corporation 3c900 10BaseT [Boomerang]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

	Latency: 64 (750ns min, 2000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at e400 [size=64]
	Expansion ROM at f0000000 [disabled] [size=64K]

01:00.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 8904
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M] Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] N/A
[7.7.]
[X.] N/A

Sorry if this not the totally right way of reporting a problem, but it's the first time I do it.

TIA

Signature · 2 lines
Bye,
	Fabrizio Ammollo
#1 lore raw

Known problem.

Quoted 5 lines · Fabrizio Ammollo

[1.] mount -o loop of ISO image lockup
[2.] mount of an ISO image created with mkisofs and correctly read and verified by isoread and isovrfy locks ; nothing is reported my mount, and it is unkillable ; the line is reported by ps this way:

Signature · 8 lines
=====================================================================
Mohammad A. Haque                              http://www.haque.net/ 
                                               [email protected]

  "Alcohol and calculus don't mix.             Project Lead
   Don't drink and derive." --Unknown          http://wm.themes.org/
                                               [email protected]
=====================================================================
#2 lore raw

Good morning, Mohammed, Fabrizio,

Quoted 1 line · Mohammad A. Haque

Known problem.

Then wouldn't it make sense to point Fabrizio at a known solution?
;-)
Fabrizio: I'm going to guess that your problem might be the loop
lockups that have been part of late 2.3 and all 2.4. Jenbs Axboe has some patches that seem to fix the problem; see ftp://ftp.kernel.org/pub/linux/kernel/people/axboe/patches/2.4.2-pre4/
The loop-6 patch there appears to apply to 2.4.2-ac1 and I
suspect will apply to 2.4.2 proper.
Mohammed: is there another problem or fix of which I'm not aware? Cheers,
- Bill

Quoted 6 lines
Quoted 5 lines · Fabrizio Ammollo

[1.] mount -o loop of ISO image lockup
[2.] mount of an ISO image created with mkisofs and correctly read and verified by isoread and isovrfy locks ; nothing is reported my mount, and it is unkillable ; the line is reported by ps this way:

---------------------------------------------------------------------------
"That vulnerability is completely theoretical." -- Microsoft L0pht, Making the theoretical practical since 1992.
(Courtesy of "Deliduka, Bennet" <[email protected]>)
--------------------------------------------------------------------------
William Stearns ([email protected]). Mason, Buildkernel, named2hosts,
and ipfwadm2ipchains are at: http://www.pobox.com/~wstearns
LinuxMonth; articles for Linux Enthusiasts! http://www.linuxmonth.com
--------------------------------------------------------------------------

#3 lore raw

I didn't want to mention the patch because I was investigating my load hovering around 1.3 after mounting an image using the patch. I know I mentioned it to someone else before but I sent out the email before I noticed the load.

Quoted 36 lines · William Stearns

Good morning, Mohammed, Fabrizio,

Quoted 1 line · Mohammad A. Haque

Known problem.

Then wouldn't it make sense to point Fabrizio at a known solution?
;-)
Fabrizio: I'm going to guess that your problem might be the loop
lockups that have been part of late 2.3 and all 2.4. Jenbs Axboe has some patches that seem to fix the problem; see ftp://ftp.kernel.org/pub/linux/kernel/people/axboe/patches/2.4.2-pre4/
The loop-6 patch there appears to apply to 2.4.2-ac1 and I
suspect will apply to 2.4.2 proper.
Mohammed: is there another problem or fix of which I'm not aware? Cheers,
- Bill

Quoted 6 lines
Quoted 5 lines · Fabrizio Ammollo

[1.] mount -o loop of ISO image lockup
[2.] mount of an ISO image created with mkisofs and correctly read and verified by isoread and isovrfy locks ; nothing is reported my mount, and it is unkillable ; the line is reported by ps this way:

---------------------------------------------------------------------------
"That vulnerability is completely theoretical." -- Microsoft L0pht, Making the theoretical practical since 1992.
(Courtesy of "Deliduka, Bennet" <[email protected]>)
--------------------------------------------------------------------------
William Stearns ([email protected]). Mason, Buildkernel, named2hosts,
and ipfwadm2ipchains are at: http://www.pobox.com/~wstearns
LinuxMonth; articles for Linux Enthusiasts! http://www.linuxmonth.com
--------------------------------------------------------------------------

Signature · 8 lines
=====================================================================
Mohammad A. Haque                              http://www.haque.net/
                                               [email protected]

  "Alcohol and calculus don't mix.             Project Lead
   Don't drink and derive." --Unknown          http://wm.themes.org/
                                               [email protected]
=====================================================================