Skip to contentSkip to conversation

Add Phytec i.MX93 support

PATCH Superseded Mathieu Othacehe 5 participants 8 messages Jan 17, 2024 – Jan 24, 2024

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add Phytec i.MX93 support

Add support for the Phytec i.MX93 Segin evaluation kit. The SoM consists of an NXP i.MX93 dual A55 CPU. The SoM is mounted on a Phytec Segin SBC.

---
 arch/arm/dts/Makefile                         |    3 +-
 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi  |  274 +++
 arch/arm/dts/imx93-phycore-segin.dts          |   95 +
 arch/arm/dts/imx93-phycore-som.dtsi           |   64 +
 arch/arm/mach-imx/imx9/Kconfig                |    6 +
 board/phytec/common/mmc.c                     |   49 +
 board/phytec/imx93_phycore/Kconfig            |   21 +
 board/phytec/imx93_phycore/MAINTAINERS        |   10 +
 board/phytec/imx93_phycore/Makefile           |   16 +
 board/phytec/imx93_phycore/imx93_phycore.c    |   89 +
 board/phytec/imx93_phycore/imx93_phycore.env  |   96 +
 .../phytec/imx93_phycore/lpddr4_timing_1GB.c  | 1546 +++++++++++++++++
 board/phytec/imx93_phycore/spl.c              |  181 ++
 configs/imx93_phycore_defconfig               |  147 ++
 doc/board/phytec/imx93_phycore.rst            |   68 +
 doc/board/phytec/index.rst                    |    1 +
 include/configs/imx93_phycore.h               |   47 +
 17 files changed, 2712 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx93-phycore-segin.dts
 create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi
 create mode 100644 board/phytec/common/mmc.c
 create mode 100644 board/phytec/imx93_phycore/Kconfig
 create mode 100644 board/phytec/imx93_phycore/MAINTAINERS
 create mode 100644 board/phytec/imx93_phycore/Makefile
 create mode 100644 board/phytec/imx93_phycore/imx93_phycore.c
 create mode 100644 board/phytec/imx93_phycore/imx93_phycore.env
 create mode 100644 board/phytec/imx93_phycore/lpddr4_timing_1GB.c
 create mode 100644 board/phytec/imx93_phycore/spl.c
 create mode 100644 configs/imx93_phycore_defconfig
 create mode 100644 doc/board/phytec/imx93_phycore.rst
 create mode 100644 include/configs/imx93_phycore.h
arch/arm/dts/Makefile +2 -1
index d456a524b36..4a23e2a2f49 100644
@@ -1127,7 +1127,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 
 dtb-$(CONFIG_ARCH_IMX9) += \
 	imx93-11x11-evk.dtb \
-	imx93-var-som-symphony.dtb
+	imx93-var-som-symphony.dtb \
+	imx93-phycore-segin.dtb
 
 dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
 	imxrt1020-evk.dtb \
arch/arm/dts/imx93-phycore-segin-u-boot.dtsi new file +274 -0

274 lines not on this page · raw message

arch/arm/dts/imx93-phycore-segin.dts new file +95 -0

95 lines not on this page · raw message

arch/arm/dts/imx93-phycore-som.dtsi new file +64 -0

64 lines not on this page · raw message

arch/arm/mach-imx/imx9/Kconfig +6 -0
index 961d6f527ab..0c1459c5cde 100644
@@ -37,10 +37,16 @@ config TARGET_IMX93_VAR_SOM
 	select IMX93
 	select IMX9_LPDDR4X
 
+config TARGET_IMX93_PHYCORE
+	bool "imx93_phycore"
+	select IMX93
+	select IMX9_LPDDR4X
+
 endchoice
 
 source "board/freescale/imx93_evk/Kconfig"
 source "board/variscite/imx93_var_som/Kconfig"
+source "board/phytec/imx93_phycore/Kconfig"
 
 endif
 
board/phytec/common/mmc.c new file +49 -0

49 lines not on this page · raw message

board/phytec/imx93_phycore/Kconfig new file +21 -0
new file mode 100644
index 00000000000..344df57afb0
@@ -0,0 +1,21 @@
+
+if TARGET_IMX93_PHYCORE
+
+config SYS_BOARD
+	default "imx93_phycore"
+
+config SYS_VENDOR
+	default "phytec"
+
+config SYS_CONFIG_NAME
+	default "imx93_phycore"
+
+config IMX93_PHYCORE_LPDDR4X_1GB
+	bool "Using LPDDR4X Timing and size of 1GB"
+	default y
+	select IMX9_LPDDR4X
+	help
+	  Select the LPDDR4X timing and size of 1GB
+
+          This sets the LPDDR4X timing and size of 1GB.
+endif
board/phytec/imx93_phycore/MAINTAINERS new file +10 -0
new file mode 100644
index 00000000000..deea6f36327
@@ -0,0 +1,10 @@
+phyCORE-i.MX93
+M:	Mathieu Othacehe <[email protected]>
+W:      https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/
+S:      Maintained
+F:      arch/arm/dts/imx93-phycore-segin.dts
+F:      arch/arm/dts/imx93-phycore-som.dtsi
+F:      arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
+F:      board/phytec/imx93_phycore/
+F:      configs/imx93_phycore_defconfig
+F:      include/configs/imx93_phycore.h
board/phytec/imx93_phycore/Makefile new file +16 -0
new file mode 100644
index 00000000000..058663b7f8a
@@ -0,0 +1,16 @@
+#
+# Copyright 2022 NXP
+# Copyright (C) 2023 PHYTEC Messtechnik GmbH
+# Christoph Stoidner <[email protected]>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += imx93_phycore.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_IMX93_PHYCORE_LPDDR4X_1GB) += lpddr4_timing_1GB.o
+else
+obj-y += ../common/mmc.o
+endif
board/phytec/imx93_phycore/imx93_phycore.c new file +89 -0

89 lines not on this page · raw message

board/phytec/imx93_phycore/imx93_phycore.env new file +96 -0

97 lines not on this page · raw message

board/phytec/imx93_phycore/lpddr4_timing_1GB.c new file +1546 -0

1,546 lines not on this page · raw message

board/phytec/imx93_phycore/spl.c new file +181 -0

181 lines not on this page · raw message

configs/imx93_phycore_defconfig new file +147 -0

147 lines not on this page · raw message

doc/board/phytec/imx93_phycore.rst new file +68 -0

68 lines not on this page · raw message

doc/board/phytec/index.rst +1 -0
index 9996bce9741..a740f0cbae4 100644
@@ -7,5 +7,6 @@ PHYTEC
    :maxdepth: 2
 
    imx8mm-phygate-tauri-l
+   imx93_phycore
    phycore-imx8mm
    phycore-imx8mp
include/configs/imx93_phycore.h new file +47 -0

47 lines not on this page · raw message

Signature · 1 line
2.41.0
reviewer
#1 lore raw

Hi Mathieu,

Thanks for the patch.

I have added more Phytec folks in case they could help review/test.

Quoted 2,876 lines · Mathieu Othacehe

Add support for the Phytec i.MX93 Segin evaluation kit. The SoM consists of an NXP i.MX93 dual A55 CPU. The SoM is mounted on a Phytec Segin SBC.

---
 arch/arm/dts/Makefile                         |    3 +-
 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi  |  274 +++
 arch/arm/dts/imx93-phycore-segin.dts          |   95 +
 arch/arm/dts/imx93-phycore-som.dtsi           |   64 +
 arch/arm/mach-imx/imx9/Kconfig                |    6 +
 board/phytec/common/mmc.c                     |   49 +
 board/phytec/imx93_phycore/Kconfig            |   21 +
 board/phytec/imx93_phycore/MAINTAINERS        |   10 +
 board/phytec/imx93_phycore/Makefile           |   16 +
 board/phytec/imx93_phycore/imx93_phycore.c    |   89 +
 board/phytec/imx93_phycore/imx93_phycore.env  |   96 +
 .../phytec/imx93_phycore/lpddr4_timing_1GB.c  | 1546 +++++++++++++++++
 board/phytec/imx93_phycore/spl.c              |  181 ++
 configs/imx93_phycore_defconfig               |  147 ++
 doc/board/phytec/imx93_phycore.rst            |   68 +
 doc/board/phytec/index.rst                    |    1 +
 include/configs/imx93_phycore.h               |   47 +
 17 files changed, 2712 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx93-phycore-segin.dts
 create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi
 create mode 100644 board/phytec/common/mmc.c
 create mode 100644 board/phytec/imx93_phycore/Kconfig
 create mode 100644 board/phytec/imx93_phycore/MAINTAINERS
 create mode 100644 board/phytec/imx93_phycore/Makefile
 create mode 100644 board/phytec/imx93_phycore/imx93_phycore.c
 create mode 100644 board/phytec/imx93_phycore/imx93_phycore.env
 create mode 100644 board/phytec/imx93_phycore/lpddr4_timing_1GB.c
 create mode 100644 board/phytec/imx93_phycore/spl.c
 create mode 100644 configs/imx93_phycore_defconfig
 create mode 100644 doc/board/phytec/imx93_phycore.rst
 create mode 100644 include/configs/imx93_phycore.h
arch/arm/dts/Makefile +2 -1
index d456a524b36..4a23e2a2f49 100644
@@ -1127,7 +1127,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 
 dtb-$(CONFIG_ARCH_IMX9) += \
        imx93-11x11-evk.dtb \
-       imx93-var-som-symphony.dtb
+       imx93-var-som-symphony.dtb \
+       imx93-phycore-segin.dtb
 
 dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
        imxrt1020-evk.dtb \
arch/arm/dts/imx93-phycore-segin-u-boot.dtsi new file +274 -0
new file mode 100644
index 00000000000..6d75f1985aa
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ *
+ * Product homepage:
+ * phyBOARD-Segin carrier board is reused for the i.MX93 design.
+ * https://www.phytec.de/produkte/single-board-computer/phyboard-segin-imx6ul/
+ */
+
+#include "imx93-u-boot.dtsi"
+
+/ {
+       wdt-reboot {
+               compatible = "wdt-reboot";
+               wdt = <&wdog3>;
+               bootph-pre-ram;
+               bootph-some-ram;
+       };
+
+       aliases {
+               ethernet0 = &eqos;
+               ethernet1 = &fec;
+       };
+
+       firmware {
+               optee {
+                       compatible = "linaro,optee-tz";
+                       method = "smc";
+               };
+       };
+};
+
+&{/soc@0} {
+       bootph-all;
+       bootph-pre-ram;
+};
+
+&aips1 {
+       bootph-pre-ram;
+       bootph-all;
+};
+
+&aips2 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&aips3 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&iomuxc {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&reg_usdhc2_vmmc {
+       u-boot,off-on-delay-us = <20000>;
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+       bootph-pre-ram;
+};
+
+&pinctrl_uart1 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&pinctrl_usdhc2 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&gpio1 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&gpio2 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&gpio3 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&gpio4 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&lpuart1 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&usdhc1 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&usdhc2 {
+       bootph-pre-ram;
+       bootph-some-ram;
+       fsl,signal-voltage-switch-extra-delay-ms = <8>;
+};
+
+&lpi2c1 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&lpi2c2 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&lpi2c3 {
+       bootph-pre-ram;
+       bootph-some-ram;
+};
+
+&s4muap {
+       bootph-pre-ram;
+       bootph-some-ram;
+       status = "okay";
+};
+
+&clk {
+       bootph-all;
+       bootph-pre-ram;
+       /delete-property/ assigned-clocks;
+       /delete-property/ assigned-clock-rates;
+       /delete-property/ assigned-clock-parents;
+};
+
+&osc_32k {
+       bootph-all;
+       bootph-pre-ram;
+};
+
+&osc_24m {
+       bootph-all;
+       bootph-pre-ram;
+};
+
+&clk_ext1 {
+       bootph-all;
+       bootph-pre-ram;
+};
+
+/*
+ * The two nodes below won't be needed once nxp,pca9451a
+ * support is added to the Linux kernel.
+ */
+&iomuxc {
+       pinctrl_lpi2c3: lpi2c3grp {
+       bootph-pre-ram;
+       fsl,pins = <
+               MX93_PAD_GPIO_IO28__LPI2C3_SDA                  0x40000b9e
+               MX93_PAD_GPIO_IO29__LPI2C3_SCL                  0x40000b9e
+       >;
+       };
+};
+
+&lpi2c3 {
+       bootph-pre-ram;
+       bootph-some-ram;
+       clock-frequency = <400000>;
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&pinctrl_lpi2c3>;
+       pinctrl-1 = <&pinctrl_lpi2c3>;
+       status = "okay";
+
+       pmic@25 {
+               bootph-pre-ram;
+               bootph-some-ram;
+               compatible = "nxp,pca9451a";
+               reg = <0x25>;
+               pinctrl-names = "default";
+
+               regulators {
+                       bootph-pre-ram;
+                       buck1: BUCK1 {
+                               regulator-name = "BUCK1";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <2187500>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <3125>;
+                       };
+
+                       buck2: BUCK2 {
+                               regulator-name = "BUCK2";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <2187500>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <3125>;
+                       };
+
+                       buck4: BUCK4{
+                               regulator-name = "BUCK4";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <3400000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       buck5: BUCK5{
+                               regulator-name = "BUCK5";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <3400000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       buck6: BUCK6 {
+                               regulator-name = "BUCK6";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <3400000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo1: LDO1 {
+                               regulator-name = "LDO1";
+                               regulator-min-microvolt = <1600000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo2: LDO2 {
+                               regulator-name = "LDO2";
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1150000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo3: LDO3 {
+                               regulator-name = "LDO3";
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo4: LDO4 {
+                               regulator-name = "LDO4";
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo5: LDO5 {
+                               regulator-name = "LDO5";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+               };
+       };
+};
arch/arm/dts/imx93-phycore-segin.dts new file +95 -0
new file mode 100644
index 00000000000..a843b322a07
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ * Copyright (C) 2024 Mathieu Othacehe <[email protected]>
+ *
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+       model = "PHYTEC phyBOARD-Segin-i.MX93";
+       compatible = "phytec,imx93-phycore-segin", "phytec,imx93-phycore-som",
+                    "fsl,imx93";
+
+       chosen {
+               stdout-path = &lpuart1;
+       };
+
+       reg_usdhc2_vmmc: regulator-usdhc2 {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+               regulator-name = "VSD_3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+/* Console */
+&lpuart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       clocks = <&clk IMX93_CLK_LPUART1_GATE>, <&clk IMX93_CLK_LPUART1_GATE>;
+       clock-names = "ipg", "per";
+       status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
+       pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+       pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+       pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+       cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+       vmmc-supply = <&reg_usdhc2_vmmc>;
+       bus-width = <4>;
+       status = "okay";
+       no-sdio;
+       no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+       status = "okay";
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       status = "okay";
+
+       pinctrl_uart1: uart1grp {
+               fsl,pins = <
+                       MX93_PAD_UART1_RXD__LPUART1_RX                  0x31e
+                       MX93_PAD_UART1_TXD__LPUART1_TX                  0x31e
+               >;
+       };
+
+       pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+               fsl,pins = <
+                       MX93_PAD_SD2_RESET_B__GPIO3_IO07                0x31e
+               >;
+       };
+
+       pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+               fsl,pins = <
+                       MX93_PAD_SD2_CD_B__GPIO3_IO00                   0x31e
+               >;
+       };
+
+       pinctrl_usdhc2: usdhc2grp {
+               fsl,pins = <
+                       MX93_PAD_SD2_CLK__USDHC2_CLK                    0x178e
+                       MX93_PAD_SD2_CMD__USDHC2_CMD                    0x139e
+                       MX93_PAD_SD2_DATA0__USDHC2_DATA0                0x138e
+                       MX93_PAD_SD2_DATA1__USDHC2_DATA1                0x138e
+                       MX93_PAD_SD2_DATA2__USDHC2_DATA2                0x138e
+                       MX93_PAD_SD2_DATA3__USDHC2_DATA3                0x139e
+                       MX93_PAD_SD2_VSELECT__USDHC2_VSELECT            0x51e
+               >;
+       };
+};
arch/arm/dts/imx93-phycore-som.dtsi new file +64 -0
new file mode 100644
index 00000000000..4edff4a50b2
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ * Copyright (C) 2024 Mathieu Othacehe <[email protected]>
+ *
+ */
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+       model = "PHYTEC phyCORE-i.MX93";
+       compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+       reserved-memory {
+               ranges;
+               #address-cells = <2>;
+               #size-cells = <2>;
+
+               linux,cma {
+                       compatible = "shared-dma-pool";
+                       reusable;
+                       alloc-ranges = <0 0x80000000 0 0x40000000>;
+                       size = <0 0x10000000>;
+                       linux,cma-default;
+               };
+
+               ele_reserved: ele-reserved@a4120000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0xa4120000 0 0x100000>;
+                       no-map;
+               };
+       };
+};
+
+/* eMMC */
+&usdhc1 {
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
+       pinctrl-0 = <&pinctrl_usdhc1>;
+       pinctrl-1 = <&pinctrl_usdhc1>;
+       pinctrl-2 = <&pinctrl_usdhc1>;
+       bus-width = <8>;
+       non-removable;
+       status = "okay";
+};
+
+&iomuxc {
+       pinctrl_usdhc1: usdhc1grp {
+               fsl,pins = <
+                       MX93_PAD_SD1_CLK__USDHC1_CLK            0x15fe
+                       MX93_PAD_SD1_CMD__USDHC1_CMD            0x13fe
+                       MX93_PAD_SD1_DATA0__USDHC1_DATA0        0x13fe
+                       MX93_PAD_SD1_DATA1__USDHC1_DATA1        0x13fe
+                       MX93_PAD_SD1_DATA2__USDHC1_DATA2        0x13fe
+                       MX93_PAD_SD1_DATA3__USDHC1_DATA3        0x13fe
+                       MX93_PAD_SD1_DATA4__USDHC1_DATA4        0x13fe
+                       MX93_PAD_SD1_DATA5__USDHC1_DATA5        0x13fe
+                       MX93_PAD_SD1_DATA6__USDHC1_DATA6        0x13fe
+                       MX93_PAD_SD1_DATA7__USDHC1_DATA7        0x13fe
+                       MX93_PAD_SD1_STROBE__USDHC1_STROBE      0x15fe
+               >;
+       };
+};
arch/arm/mach-imx/imx9/Kconfig +6 -0
index 961d6f527ab..0c1459c5cde 100644
@@ -37,10 +37,16 @@ config TARGET_IMX93_VAR_SOM
        select IMX93
        select IMX9_LPDDR4X
 
+config TARGET_IMX93_PHYCORE
+       bool "imx93_phycore"
+       select IMX93
+       select IMX9_LPDDR4X
+
 endchoice
 
 source "board/freescale/imx93_evk/Kconfig"
 source "board/variscite/imx93_var_som/Kconfig"
+source "board/phytec/imx93_phycore/Kconfig"
 
 endif
 
board/phytec/common/mmc.c new file +49 -0
new file mode 100644
index 00000000000..d747aef232f
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018-2022 NXP
+ */
+
+#include <command.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <stdbool.h>
+#include <vsprintf.h>
+#include <mmc.h>
+#include <env.h>
+
+static int check_mmc_autodetect(void)
+{
+       char *autodetect_str = env_get("mmcautodetect");
+
+       if (autodetect_str && !strcmp(autodetect_str, "yes"))
+               return 1;
+
+       return 0;
+}
+
+/* This should be defined for each board */
+__weak int mmc_map_to_kernel_blk(int dev_no)
+{
+       return dev_no;
+}
+
+void board_late_mmc_env_init(void)
+{
+       char cmd[32];
+       char mmcblk[32];
+       u32 dev_no = mmc_get_env_dev();
+
+       if (!check_mmc_autodetect())
+               return;
+
+       env_set_ulong("mmcdev", dev_no);
+
+       /* Set mmcblk env */
+       sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", mmc_map_to_kernel_blk(dev_no));
+       env_set("mmcroot", mmcblk);
+
+       sprintf(cmd, "mmc dev %d", dev_no);
+       run_command(cmd, 0);
+}
board/phytec/imx93_phycore/Kconfig new file +21 -0
new file mode 100644
index 00000000000..344df57afb0
@@ -0,0 +1,21 @@
+
+if TARGET_IMX93_PHYCORE
+
+config SYS_BOARD
+       default "imx93_phycore"
+
+config SYS_VENDOR
+       default "phytec"
+
+config SYS_CONFIG_NAME
+       default "imx93_phycore"
+
+config IMX93_PHYCORE_LPDDR4X_1GB
+       bool "Using LPDDR4X Timing and size of 1GB"
+       default y
+       select IMX9_LPDDR4X
+       help
+         Select the LPDDR4X timing and size of 1GB
+
+          This sets the LPDDR4X timing and size of 1GB.
+endif
board/phytec/imx93_phycore/MAINTAINERS new file +10 -0
new file mode 100644
index 00000000000..deea6f36327
@@ -0,0 +1,10 @@
+phyCORE-i.MX93
+M:     Mathieu Othacehe <[email protected]>
+W:      https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/
+S:      Maintained
+F:      arch/arm/dts/imx93-phycore-segin.dts
+F:      arch/arm/dts/imx93-phycore-som.dtsi
+F:      arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
+F:      board/phytec/imx93_phycore/
+F:      configs/imx93_phycore_defconfig
+F:      include/configs/imx93_phycore.h
board/phytec/imx93_phycore/Makefile new file +16 -0
new file mode 100644
index 00000000000..058663b7f8a
@@ -0,0 +1,16 @@
+#
+# Copyright 2022 NXP
+# Copyright (C) 2023 PHYTEC Messtechnik GmbH
+# Christoph Stoidner <[email protected]>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += imx93_phycore.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_IMX93_PHYCORE_LPDDR4X_1GB) += lpddr4_timing_1GB.o
+else
+obj-y += ../common/mmc.o
+endif
board/phytec/imx93_phycore/imx93_phycore.c new file +89 -0
new file mode 100644
index 00000000000..2a434637399
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ */
+
+#include <env.h>
+#include <init.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/global_data.h>
+#include <asm/arch-imx9/ccm_regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch-imx9/imx93_pins.h>
+#include <asm/arch/clock.h>
+#include <power/pmic.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <usb.h>
+#include <dwc3-uboot.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_DSE(6) | PAD_CTL_FSEL2)
+#define WDOG_PAD_CTRL  (PAD_CTL_DSE(6) | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
+
+static const iomux_v3_cfg_t uart_pads[] = {
+       MX93_PAD_UART1_RXD__LPUART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+       MX93_PAD_UART1_TXD__LPUART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+       imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+
+       init_uart_clk(LPUART1_CLK_ROOT);
+
+       return 0;
+}
+
+static int setup_fec(void)
+{
+       return set_clk_enet(ENET_125MHZ);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+       if (phydev->drv->config)
+               phydev->drv->config(phydev);
+
+       return 0;
+}
+
+static int setup_eqos(void)
+{
+       struct blk_ctrl_wakeupmix_regs *bctrl =
+               (struct blk_ctrl_wakeupmix_regs *)BLK_CTRL_WAKEUPMIX_BASE_ADDR;
+
+       /* set INTF as RGMII, enable RGMII TXC clock */
+       clrsetbits_le32(&bctrl->eqos_gpr,
+                       BCTRL_GPR_ENET_QOS_INTF_MODE_MASK,
+                       BCTRL_GPR_ENET_QOS_INTF_SEL_RGMII | BCTRL_GPR_ENET_QOS_CLK_GEN_EN);
+
+       return set_clk_eqos(ENET_125MHZ);
+
+       return 0;
+}
+
+int board_init(void)
+{
+       if (IS_ENABLED(CONFIG_FEC_MXC))
+               setup_fec();
+
+       if (IS_ENABLED(CONFIG_DWC_ETH_QOS))
+               setup_eqos();
+
+       return 0;
+}
+
+int board_late_init(void)
+{
+       env_set("sec_boot", "no");
+       if (IS_ENABLED(CONFIG_AHAB_BOOT))
+               env_set("sec_boot", "yes");
+
+       return 0;
+}
board/phytec/imx93_phycore/imx93_phycore.env new file +96 -0
new file mode 100644
index 00000000000..75f28459b77
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+image=Image
+console=ttyLP0
+fdt_addr=0x83000000
+fdto_addr=0x830c0000
+bootenv_addr=0x83500000
+fdt_file=CONFIG_DEFAULT_FDT_FILE
+ipaddr=192.168.3.11
+serverip=192.168.3.10
+netmask=255.255.255.0
+ip_dyn=no
+bootenv=bootenv.txt
+mmc_load_bootenv=fatload mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv}
+mmcdev=__stringify(CONFIG_SYS_MMC_ENV_DEV)
+mmcpart=1
+mmcroot=2
+mmcautodetect=yes
+mmcargs=setenv bootargs console=${console},${baudrate} earlycon
+       root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw
+loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
+loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}
+mmc_load_overlay=fatload mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay}
+mmc_apply_overlays=
+       fdt address ${fdt_addr};
+       for overlay in ${overlays};
+       do;
+               if run mmc_load_overlay; then
+                       fdt resize ${filesize};
+                       fdt apply ${fdto_addr};
+               fi;
+       done;
+mmcboot=
+       echo Booting from mmc ...;
+       if run mmc_load_bootenv; then
+               env import -t ${bootenv_addr} ${filesize};
+       fi;
+       run mmcargs;
+       if run loadfdt; then
+               run mmc_apply_overlays;
+               booti ${loadaddr} - ${fdt_addr};
+       else
+               echo WARN: Cannot load the DT;
+       fi;
+nfsroot=/nfs
+netargs=setenv bootargs console=${console},${baudrate} earlycon
+       root=/dev/nfs ip=${nfsip} nfsroot=${serverip}:${nfsroot},v3,tcp
+net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
+net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
+net_apply_overlays=
+       fdt address ${fdt_addr};
+       for overlay in ${overlays};
+       do;
+               if run net_load_overlay; then
+                       fdt resize ${filesize};
+                       fdt apply ${fdto_addr};
+               fi;
+       done;
+netboot=
+       echo Booting from net ...;
+       if test ${ip_dyn} = yes; then
+               setenv nfsip dhcp;
+               setenv get_cmd dhcp;
+       else
+               setenv nfsip ${ipaddr}:${serverip}::${netmask}::eth0:on;
+               setenv get_cmd tftp;
+       fi;
+       if run net_load_bootenv; then
+               env import -t ${bootenv_addr} ${filesize};
+       fi;
+       run netargs;
+       ${get_cmd} ${loadaddr} ${image};
+       if ${get_cmd} ${fdt_addr} ${fdt_file}; then
+               run net_apply_overlays;
+               booti ${loadaddr} - ${fdt_addr};
+       else
+               echo WARN: Cannot load the DT;
+       fi;
+bsp_bootcmd=echo Running BSP bootcmd ...;
+        mmc dev ${mmcdev}; if mmc rescan; then
+          if run loadbootscript; then
+          run bootscript;
+          else
+          if test ${sec_boot} = yes; then
+                   if run loadcntr; then
+                          run mmcboot;
+                   else run netboot;
+                   fi;
+            else
+                   if run loadimage; then
+                           run mmcboot;
+                   else run netboot;
+                   fi;
+                fi;
+          fi;
+         fi;
\ No newline at end of file
board/phytec/imx93_phycore/lpddr4_timing_1GB.c new file +1546 -0
new file mode 100644
index 00000000000..2111972a40e
@@ -0,0 +1,1546 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2023 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ *
+ * Code generated with DDR Tool v1.0.0.
+ */
+
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+
+static struct dram_cfg_param ddr_ddrc_cfg[] = {
+       /** Initialize DDRC registers **/
+       {0x4e300110, 0x44100001},
+       {0x4e300000, 0x8000bf},
+       {0x4e300008, 0x0},
+       {0x4e300080, 0x80000412},
+       {0x4e300084, 0x0},
+       {0x4e300114, 0x1002},
+       {0x4e300260, 0x4080},
+       {0x4e300f04, 0x80},
+       {0x4e300800, 0x43b30002},
+       {0x4e300804, 0x1f1f1f1f},
+       {0x4e301000, 0x0},
+       {0x4e301240, 0x0},
+       {0x4e301244, 0x0},
+       {0x4e301248, 0x0},
+       {0x4e30124c, 0x0},
+       {0x4e301250, 0x0},
+       {0x4e301254, 0x0},
+       {0x4e301258, 0x0},
+       {0x4e30125c, 0x0},
+
+};
+
+/* dram fsp cfg */
+static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
+       {
+               {
+                       {0x4e300100, 0x24A0421B},
+                       {0x4e300104, 0xF8EE001B},
+                       {0x4e300108, 0x2F263233},
+                       {0x4e30010C, 0x0005E18B},
+                       {0x4e300124, 0x1C770000},
+                       {0x4e300160, 0x00009102},
+                       {0x4e30016C, 0x35F00000},
+                       {0x4e300170, 0x8B0B0608},
+                       {0x4e300250, 0x00000028},
+                       {0x4e300254, 0x00FE00FE},
+                       {0x4e300258, 0x00000008},
+                       {0x4e30025C, 0x00000400},
+                       {0x4e300300, 0x224F2215},
+                       {0x4e300304, 0x00FE2213},
+                       {0x4e300308, 0x0A3C0E3C},
+               },
+               {
+                       {0x01, 0xE4},
+                       {0x02, 0x36},
+                       {0x03, 0xF2},
+                       {0x0b, 0x46},
+                       {0x0c, 0x11},
+                       {0x0e, 0x11},
+                       {0x16, 0x04},
+               },
+               0,
+       },
+
+};
+
+/* PHY Initialize Configuration */
+static struct dram_cfg_param ddr_ddrphy_cfg[] = {
+       {0x100a0, 0x0},
+       {0x100a1, 0x1},
+       {0x100a2, 0x2},
+       {0x100a3, 0x3},
+       {0x100a4, 0x4},
+       {0x100a5, 0x5},
+       {0x100a6, 0x6},
+       {0x100a7, 0x7},
+       {0x110a0, 0x0},
+       {0x110a1, 0x1},
+       {0x110a2, 0x2},
+       {0x110a3, 0x3},
+       {0x110a4, 0x4},
+       {0x110a5, 0x5},
+       {0x110a6, 0x6},
+       {0x110a7, 0x7},
+       {0x1005f, 0x5ff},
+       {0x1015f, 0x5ff},
+       {0x1105f, 0x5ff},
+       {0x1115f, 0x5ff},
+       {0x55, 0x1ff},
+       {0x1055, 0x1ff},
+       {0x2055, 0x1ff},
+       {0x200c5, 0x19},
+       {0x2002e, 0x2},
+       {0x90204, 0x0},
+       {0x20024, 0x1e3},
+       {0x2003a, 0x2},
+       {0x2007d, 0x212},
+       {0x2007c, 0x61},
+       {0x20056, 0x3},
+       {0x1004d, 0x600},
+       {0x1014d, 0x600},
+       {0x1104d, 0x600},
+       {0x1114d, 0x600},
+       {0x10049, 0xe00},
+       {0x10149, 0xe00},
+       {0x11049, 0xe00},
+       {0x11149, 0xe00},
+       {0x43, 0x60},
+       {0x1043, 0x60},
+       {0x2043, 0x60},
+       {0x20018, 0x1},
+       {0x20075, 0x4},
+       {0x20050, 0x0},
+       {0x2009b, 0x2},
+       {0x20008, 0x3a5},
+       {0x20088, 0x9},
+       {0x200b2, 0x10c},
+       {0x10043, 0x5a1},
+       {0x10143, 0x5a1},
+       {0x11043, 0x5a1},
+       {0x11143, 0x5a1},
+       {0x200fa, 0x2},
+       {0x20019, 0x1},
+       {0x200f0, 0x600},
+       {0x200f1, 0x0},
+       {0x200f2, 0x4444},
+       {0x200f3, 0x8888},
+       {0x200f4, 0x5655},
+       {0x200f5, 0x0},
+       {0x200f6, 0x0},
+       {0x200f7, 0xf000},
+       {0x20025, 0x0},
+       {0x2002d, 0x1},
+       {0x2002c, 0x0},
+       {0x20021, 0x0},
+       {0x200c7, 0x21},
+       {0x1200c7, 0x21},
+       {0x200ca, 0x24},
+       {0x1200ca, 0x24},
+
+};
+
+/* ddr phy trained csr */
+static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
+       {0x1005f, 0x0},
+       {0x1015f, 0x0},
+       {0x1105f, 0x0},
+       {0x1115f, 0x0},
+       {0x55, 0x0},
+       {0x1055, 0x0},
+       {0x2055, 0x0},
+       {0x200c5, 0x0},
+       {0x2002e, 0x0},
+       {0x90204, 0x0},
+       {0x20024, 0x0},
+       {0x2003a, 0x0},
+       {0x2007d, 0x0},
+       {0x2007c, 0x0},
+       {0x20056, 0x0},
+       {0x1004d, 0x0},
+       {0x1014d, 0x0},
+       {0x1104d, 0x0},
+       {0x1114d, 0x0},
+       {0x10049, 0x0},
+       {0x10149, 0x0},
+       {0x11049, 0x0},
+       {0x11149, 0x0},
+       {0x43, 0x0},
+       {0x1043, 0x0},
+       {0x2043, 0x0},
+       {0x20018, 0x0},
+       {0x20075, 0x0},
+       {0x20050, 0x0},
+       {0x2009b, 0x0},
+       {0x20008, 0x0},
+       {0x20088, 0x0},
+       {0x200b2, 0x0},
+       {0x10043, 0x0},
+       {0x10143, 0x0},
+       {0x11043, 0x0},
+       {0x11143, 0x0},
+       {0x200fa, 0x0},
+       {0x20019, 0x0},
+       {0x200f0, 0x0},
+       {0x200f1, 0x0},
+       {0x200f2, 0x0},
+       {0x200f3, 0x0},
+       {0x200f4, 0x0},
+       {0x200f5, 0x0},
+       {0x200f6, 0x0},
+       {0x200f7, 0x0},
+       {0x20025, 0x0},
+       {0x2002d, 0x0},
+       {0x2002c, 0x0},
+       {0xd0000, 0x0},
+       {0x90000, 0x0},
+       {0x90001, 0x0},
+       {0x90002, 0x0},
+       {0x90003, 0x0},
+       {0x90004, 0x0},
+       {0x90005, 0x0},
+       {0x90029, 0x0},
+       {0x9002a, 0x0},
+       {0x9002b, 0x0},
+       {0x9002c, 0x0},
+       {0x9002d, 0x0},
+       {0x9002e, 0x0},
+       {0x9002f, 0x0},
+       {0x90030, 0x0},
+       {0x90031, 0x0},
+       {0x90032, 0x0},
+       {0x90033, 0x0},
+       {0x90034, 0x0},
+       {0x90035, 0x0},
+       {0x90036, 0x0},
+       {0x90037, 0x0},
+       {0x90038, 0x0},
+       {0x90039, 0x0},
+       {0x9003a, 0x0},
+       {0x9003b, 0x0},
+       {0x9003c, 0x0},
+       {0x9003d, 0x0},
+       {0x9003e, 0x0},
+       {0x9003f, 0x0},
+       {0x90040, 0x0},
+       {0x90041, 0x0},
+       {0x90042, 0x0},
+       {0x90043, 0x0},
+       {0x90044, 0x0},
+       {0x90045, 0x0},
+       {0x90046, 0x0},
+       {0x90047, 0x0},
+       {0x90048, 0x0},
+       {0x90049, 0x0},
+       {0x9004a, 0x0},
+       {0x9004b, 0x0},
+       {0x9004c, 0x0},
+       {0x9004d, 0x0},
+       {0x9004e, 0x0},
+       {0x9004f, 0x0},
+       {0x90050, 0x0},
+       {0x90051, 0x0},
+       {0x90052, 0x0},
+       {0x90053, 0x0},
+       {0x90054, 0x0},
+       {0x90055, 0x0},
+       {0x90056, 0x0},
+       {0x90057, 0x0},
+       {0x90058, 0x0},
+       {0x90059, 0x0},
+       {0x9005a, 0x0},
+       {0x9005b, 0x0},
+       {0x9005c, 0x0},
+       {0x9005d, 0x0},
+       {0x9005e, 0x0},
+       {0x9005f, 0x0},
+       {0x90060, 0x0},
+       {0x90061, 0x0},
+       {0x90062, 0x0},
+       {0x90063, 0x0},
+       {0x90064, 0x0},
+       {0x90065, 0x0},
+       {0x90066, 0x0},
+       {0x90067, 0x0},
+       {0x90068, 0x0},
+       {0x90069, 0x0},
+       {0x9006a, 0x0},
+       {0x9006b, 0x0},
+       {0x9006c, 0x0},
+       {0x9006d, 0x0},
+       {0x9006e, 0x0},
+       {0x9006f, 0x0},
+       {0x90070, 0x0},
+       {0x90071, 0x0},
+       {0x90072, 0x0},
+       {0x90073, 0x0},
+       {0x90074, 0x0},
+       {0x90075, 0x0},
+       {0x90076, 0x0},
+       {0x90077, 0x0},
+       {0x90078, 0x0},
+       {0x90079, 0x0},
+       {0x9007a, 0x0},
+       {0x9007b, 0x0},
+       {0x9007c, 0x0},
+       {0x9007d, 0x0},
+       {0x9007e, 0x0},
+       {0x9007f, 0x0},
+       {0x90080, 0x0},
+       {0x90081, 0x0},
+       {0x90082, 0x0},
+       {0x90083, 0x0},
+       {0x90084, 0x0},
+       {0x90085, 0x0},
+       {0x90086, 0x0},
+       {0x90087, 0x0},
+       {0x90088, 0x0},
+       {0x90089, 0x0},
+       {0x9008a, 0x0},
+       {0x9008b, 0x0},
+       {0x9008c, 0x0},
+       {0x9008d, 0x0},
+       {0x9008e, 0x0},
+       {0x9008f, 0x0},
+       {0x90090, 0x0},
+       {0x90091, 0x0},
+       {0x90092, 0x0},
+       {0x90093, 0x0},
+       {0x90094, 0x0},
+       {0x90095, 0x0},
+       {0x90096, 0x0},
+       {0x90097, 0x0},
+       {0x90098, 0x0},
+       {0x90099, 0x0},
+       {0x9009a, 0x0},
+       {0x9009b, 0x0},
+       {0x9009c, 0x0},
+       {0x9009d, 0x0},
+       {0x9009e, 0x0},
+       {0x9009f, 0x0},
+       {0x900a0, 0x0},
+       {0x900a1, 0x0},
+       {0x900a2, 0x0},
+       {0x900a3, 0x0},
+       {0x900a4, 0x0},
+       {0x900a5, 0x0},
+       {0x900a6, 0x0},
+       {0x900a7, 0x0},
+       {0x900a8, 0x0},
+       {0x900a9, 0x0},
+       {0x40000, 0x0},
+       {0x40020, 0x0},
+       {0x40040, 0x0},
+       {0x40060, 0x0},
+       {0x40001, 0x0},
+       {0x40021, 0x0},
+       {0x40041, 0x0},
+       {0x40061, 0x0},
+       {0x40002, 0x0},
+       {0x40022, 0x0},
+       {0x40042, 0x0},
+       {0x40062, 0x0},
+       {0x40003, 0x0},
+       {0x40023, 0x0},
+       {0x40043, 0x0},
+       {0x40063, 0x0},
+       {0x40004, 0x0},
+       {0x40024, 0x0},
+       {0x40044, 0x0},
+       {0x40064, 0x0},
+       {0x40005, 0x0},
+       {0x40025, 0x0},
+       {0x40045, 0x0},
+       {0x40065, 0x0},
+       {0x40006, 0x0},
+       {0x40026, 0x0},
+       {0x40046, 0x0},
+       {0x40066, 0x0},
+       {0x40007, 0x0},
+       {0x40027, 0x0},
+       {0x40047, 0x0},
+       {0x40067, 0x0},
+       {0x40008, 0x0},
+       {0x40028, 0x0},
+       {0x40048, 0x0},
+       {0x40068, 0x0},
+       {0x40009, 0x0},
+       {0x40029, 0x0},
+       {0x40049, 0x0},
+       {0x40069, 0x0},
+       {0x4000a, 0x0},
+       {0x4002a, 0x0},
+       {0x4004a, 0x0},
+       {0x4006a, 0x0},
+       {0x4000b, 0x0},
+       {0x4002b, 0x0},
+       {0x4004b, 0x0},
+       {0x4006b, 0x0},
+       {0x4000c, 0x0},
+       {0x4002c, 0x0},
+       {0x4004c, 0x0},
+       {0x4006c, 0x0},
+       {0x4000d, 0x0},
+       {0x4002d, 0x0},
+       {0x4004d, 0x0},
+       {0x4006d, 0x0},
+       {0x4000e, 0x0},
+       {0x4002e, 0x0},
+       {0x4004e, 0x0},
+       {0x4006e, 0x0},
+       {0x4000f, 0x0},
+       {0x4002f, 0x0},
+       {0x4004f, 0x0},
+       {0x4006f, 0x0},
+       {0x40010, 0x0},
+       {0x40030, 0x0},
+       {0x40050, 0x0},
+       {0x40070, 0x0},
+       {0x40011, 0x0},
+       {0x40031, 0x0},
+       {0x40051, 0x0},
+       {0x40071, 0x0},
+       {0x40012, 0x0},
+       {0x40032, 0x0},
+       {0x40052, 0x0},
+       {0x40072, 0x0},
+       {0x40013, 0x0},
+       {0x40033, 0x0},
+       {0x40053, 0x0},
+       {0x40073, 0x0},
+       {0x40014, 0x0},
+       {0x40034, 0x0},
+       {0x40054, 0x0},
+       {0x40074, 0x0},
+       {0x40015, 0x0},
+       {0x40035, 0x0},
+       {0x40055, 0x0},
+       {0x40075, 0x0},
+       {0x40016, 0x0},
+       {0x40036, 0x0},
+       {0x40056, 0x0},
+       {0x40076, 0x0},
+       {0x40017, 0x0},
+       {0x40037, 0x0},
+       {0x40057, 0x0},
+       {0x40077, 0x0},
+       {0x40018, 0x0},
+       {0x40038, 0x0},
+       {0x40058, 0x0},
+       {0x40078, 0x0},
+       {0x40019, 0x0},
+       {0x40039, 0x0},
+       {0x40059, 0x0},
+       {0x40079, 0x0},
+       {0x4001a, 0x0},
+       {0x4003a, 0x0},
+       {0x4005a, 0x0},
+       {0x4007a, 0x0},
+       {0x900aa, 0x0},
+       {0x900ab, 0x0},
+       {0x900ac, 0x0},
+       {0x900ad, 0x0},
+       {0x900ae, 0x0},
+       {0x900af, 0x0},
+       {0x900b0, 0x0},
+       {0x900b1, 0x0},
+       {0x900b2, 0x0},
+       {0x900b3, 0x0},
+       {0x900b4, 0x0},
+       {0x900b5, 0x0},
+       {0x900b6, 0x0},
+       {0x900b7, 0x0},
+       {0x900b8, 0x0},
+       {0x900b9, 0x0},
+       {0x900ba, 0x0},
+       {0x900bb, 0x0},
+       {0x900bc, 0x0},
+       {0x900bd, 0x0},
+       {0x900be, 0x0},
+       {0x900bf, 0x0},
+       {0x900c0, 0x0},
+       {0x900c1, 0x0},
+       {0x900c2, 0x0},
+       {0x900c3, 0x0},
+       {0x900c4, 0x0},
+       {0x900c5, 0x0},
+       {0x900c6, 0x0},
+       {0x900c7, 0x0},
+       {0x900c8, 0x0},
+       {0x900c9, 0x0},
+       {0x900ca, 0x0},
+       {0x900cb, 0x0},
+       {0x900cc, 0x0},
+       {0x900cd, 0x0},
+       {0x900ce, 0x0},
+       {0x900cf, 0x0},
+       {0x900d0, 0x0},
+       {0x900d1, 0x0},
+       {0x900d2, 0x0},
+       {0x900d3, 0x0},
+       {0x900d4, 0x0},
+       {0x900d5, 0x0},
+       {0x900d6, 0x0},
+       {0x900d7, 0x0},
+       {0x900d8, 0x0},
+       {0x900d9, 0x0},
+       {0x900da, 0x0},
+       {0x900db, 0x0},
+       {0x900dc, 0x0},
+       {0x900dd, 0x0},
+       {0x900de, 0x0},
+       {0x900df, 0x0},
+       {0x900e0, 0x0},
+       {0x900e1, 0x0},
+       {0x900e2, 0x0},
+       {0x900e3, 0x0},
+       {0x900e4, 0x0},
+       {0x900e5, 0x0},
+       {0x900e6, 0x0},
+       {0x900e7, 0x0},
+       {0x900e8, 0x0},
+       {0x900e9, 0x0},
+       {0x900ea, 0x0},
+       {0x900eb, 0x0},
+       {0x900ec, 0x0},
+       {0x900ed, 0x0},
+       {0x900ee, 0x0},
+       {0x900ef, 0x0},
+       {0x900f0, 0x0},
+       {0x900f1, 0x0},
+       {0x900f2, 0x0},
+       {0x900f3, 0x0},
+       {0x900f4, 0x0},
+       {0x900f5, 0x0},
+       {0x900f6, 0x0},
+       {0x900f7, 0x0},
+       {0x900f8, 0x0},
+       {0x900f9, 0x0},
+       {0x900fa, 0x0},
+       {0x900fb, 0x0},
+       {0x900fc, 0x0},
+       {0x900fd, 0x0},
+       {0x900fe, 0x0},
+       {0x900ff, 0x0},
+       {0x90100, 0x0},
+       {0x90101, 0x0},
+       {0x90102, 0x0},
+       {0x90103, 0x0},
+       {0x90104, 0x0},
+       {0x90105, 0x0},
+       {0x90106, 0x0},
+       {0x90107, 0x0},
+       {0x90108, 0x0},
+       {0x90109, 0x0},
+       {0x9010a, 0x0},
+       {0x9010b, 0x0},
+       {0x9010c, 0x0},
+       {0x9010d, 0x0},
+       {0x9010e, 0x0},
+       {0x9010f, 0x0},
+       {0x90110, 0x0},
+       {0x90111, 0x0},
+       {0x90112, 0x0},
+       {0x90113, 0x0},
+       {0x90114, 0x0},
+       {0x90115, 0x0},
+       {0x90116, 0x0},
+       {0x90117, 0x0},
+       {0x90118, 0x0},
+       {0x90119, 0x0},
+       {0x9011a, 0x0},
+       {0x9011b, 0x0},
+       {0x9011c, 0x0},
+       {0x9011d, 0x0},
+       {0x9011e, 0x0},
+       {0x9011f, 0x0},
+       {0x90120, 0x0},
+       {0x90121, 0x0},
+       {0x90122, 0x0},
+       {0x90123, 0x0},
+       {0x90124, 0x0},
+       {0x90125, 0x0},
+       {0x90126, 0x0},
+       {0x90127, 0x0},
+       {0x90128, 0x0},
+       {0x90129, 0x0},
+       {0x9012a, 0x0},
+       {0x9012b, 0x0},
+       {0x9012c, 0x0},
+       {0x9012d, 0x0},
+       {0x9012e, 0x0},
+       {0x9012f, 0x0},
+       {0x90130, 0x0},
+       {0x90131, 0x0},
+       {0x90132, 0x0},
+       {0x90133, 0x0},
+       {0x90134, 0x0},
+       {0x90135, 0x0},
+       {0x90136, 0x0},
+       {0x90137, 0x0},
+       {0x90138, 0x0},
+       {0x90139, 0x0},
+       {0x9013a, 0x0},
+       {0x9013b, 0x0},
+       {0x9013c, 0x0},
+       {0x9013d, 0x0},
+       {0x9013e, 0x0},
+       {0x9013f, 0x0},
+       {0x90140, 0x0},
+       {0x90141, 0x0},
+       {0x90142, 0x0},
+       {0x90143, 0x0},
+       {0x90144, 0x0},
+       {0x90145, 0x0},
+       {0x90146, 0x0},
+       {0x90147, 0x0},
+       {0x90148, 0x0},
+       {0x90149, 0x0},
+       {0x9014a, 0x0},
+       {0x9014b, 0x0},
+       {0x9014c, 0x0},
+       {0x9014d, 0x0},
+       {0x9014e, 0x0},
+       {0x9014f, 0x0},
+       {0x90150, 0x0},
+       {0x90151, 0x0},
+       {0x90152, 0x0},
+       {0x90153, 0x0},
+       {0x90154, 0x0},
+       {0x90155, 0x0},
+       {0x90156, 0x0},
+       {0x90157, 0x0},
+       {0x90158, 0x0},
+       {0x90159, 0x0},
+       {0x9015a, 0x0},
+       {0x9015b, 0x0},
+       {0x9015c, 0x0},
+       {0x9015d, 0x0},
+       {0x9015e, 0x0},
+       {0x9015f, 0x0},
+       {0x90160, 0x0},
+       {0x90161, 0x0},
+       {0x90162, 0x0},
+       {0x90163, 0x0},
+       {0x90164, 0x0},
+       {0x90165, 0x0},
+       {0x90166, 0x0},
+       {0x90167, 0x0},
+       {0x90168, 0x0},
+       {0x90169, 0x0},
+       {0x9016a, 0x0},
+       {0x9016b, 0x0},
+       {0x9016c, 0x0},
+       {0x9016d, 0x0},
+       {0x9016e, 0x0},
+       {0x9016f, 0x0},
+       {0x90170, 0x0},
+       {0x90171, 0x0},
+       {0x90172, 0x0},
+       {0x90173, 0x0},
+       {0x90174, 0x0},
+       {0x90175, 0x0},
+       {0x90176, 0x0},
+       {0x90177, 0x0},
+       {0x90178, 0x0},
+       {0x90179, 0x0},
+       {0x9017a, 0x0},
+       {0x9017b, 0x0},
+       {0x9017c, 0x0},
+       {0x9017d, 0x0},
+       {0x9017e, 0x0},
+       {0x9017f, 0x0},
+       {0x90180, 0x0},
+       {0x90181, 0x0},
+       {0x90182, 0x0},
+       {0x90183, 0x0},
+       {0x90184, 0x0},
+       {0x90006, 0x0},
+       {0x90007, 0x0},
+       {0x90008, 0x0},
+       {0x90009, 0x0},
+       {0x9000a, 0x0},
+       {0x9000b, 0x0},
+       {0xd00e7, 0x0},
+       {0x90017, 0x0},
+       {0x9001f, 0x0},
+       {0x90026, 0x0},
+       {0x400d0, 0x0},
+       {0x400d1, 0x0},
+       {0x400d2, 0x0},
+       {0x400d3, 0x0},
+       {0x400d4, 0x0},
+       {0x400d5, 0x0},
+       {0x400d6, 0x0},
+       {0x400d7, 0x0},
+       {0x200be, 0x0},
+       {0x2000b, 0x0},
+       {0x2000c, 0x0},
+       {0x2000d, 0x0},
+       {0x2000e, 0x0},
+       {0x9000c, 0x0},
+       {0x9000d, 0x0},
+       {0x9000e, 0x0},
+       {0x9000f, 0x0},
+       {0x90010, 0x0},
+       {0x90011, 0x0},
+       {0x90012, 0x0},
+       {0x90013, 0x0},
+       {0x20010, 0x0},
+       {0x20011, 0x0},
+       {0x40080, 0x0},
+       {0x40081, 0x0},
+       {0x40082, 0x0},
+       {0x40083, 0x0},
+       {0x40084, 0x0},
+       {0x40085, 0x0},
+       {0x400fd, 0x0},
+       {0x400f1, 0x0},
+       {0x10011, 0x0},
+       {0x10012, 0x0},
+       {0x10013, 0x0},
+       {0x10018, 0x0},
+       {0x10002, 0x0},
+       {0x100b2, 0x0},
+       {0x101b4, 0x0},
+       {0x102b4, 0x0},
+       {0x103b4, 0x0},
+       {0x104b4, 0x0},
+       {0x105b4, 0x0},
+       {0x106b4, 0x0},
+       {0x107b4, 0x0},
+       {0x108b4, 0x0},
+       {0x11011, 0x0},
+       {0x11012, 0x0},
+       {0x11013, 0x0},
+       {0x11018, 0x0},
+       {0x11002, 0x0},
+       {0x110b2, 0x0},
+       {0x111b4, 0x0},
+       {0x112b4, 0x0},
+       {0x113b4, 0x0},
+       {0x114b4, 0x0},
+       {0x115b4, 0x0},
+       {0x116b4, 0x0},
+       {0x117b4, 0x0},
+       {0x118b4, 0x0},
+       {0x20089, 0x0},
+       {0xc0080, 0x0},
+       {0x200cb, 0x0},
+       {0x10068, 0x0},
+       {0x10069, 0x0},
+       {0x10168, 0x0},
+       {0x10169, 0x0},
+       {0x10268, 0x0},
+       {0x10269, 0x0},
+       {0x10368, 0x0},
+       {0x10369, 0x0},
+       {0x10468, 0x0},
+       {0x10469, 0x0},
+       {0x10568, 0x0},
+       {0x10569, 0x0},
+       {0x10668, 0x0},
+       {0x10669, 0x0},
+       {0x10768, 0x0},
+       {0x10769, 0x0},
+       {0x10868, 0x0},
+       {0x10869, 0x0},
+       {0x100aa, 0x0},
+       {0x10062, 0x0},
+       {0x10001, 0x0},
+       {0x100a0, 0x0},
+       {0x100a1, 0x0},
+       {0x100a2, 0x0},
+       {0x100a3, 0x0},
+       {0x100a4, 0x0},
+       {0x100a5, 0x0},
+       {0x100a6, 0x0},
+       {0x100a7, 0x0},
+       {0x11068, 0x0},
+       {0x11069, 0x0},
+       {0x11168, 0x0},
+       {0x11169, 0x0},
+       {0x11268, 0x0},
+       {0x11269, 0x0},
+       {0x11368, 0x0},
+       {0x11369, 0x0},
+       {0x11468, 0x0},
+       {0x11469, 0x0},
+       {0x11568, 0x0},
+       {0x11569, 0x0},
+       {0x11668, 0x0},
+       {0x11669, 0x0},
+       {0x11768, 0x0},
+       {0x11769, 0x0},
+       {0x11868, 0x0},
+       {0x11869, 0x0},
+       {0x110aa, 0x0},
+       {0x11062, 0x0},
+       {0x11001, 0x0},
+       {0x110a0, 0x0},
+       {0x110a1, 0x0},
+       {0x110a2, 0x0},
+       {0x110a3, 0x0},
+       {0x110a4, 0x0},
+       {0x110a5, 0x0},
+       {0x110a6, 0x0},
+       {0x110a7, 0x0},
+       {0x80, 0x0},
+       {0x1080, 0x0},
+       {0x2080, 0x0},
+       {0x10020, 0x0},
+       {0x10080, 0x0},
+       {0x10081, 0x0},
+       {0x100d0, 0x0},
+       {0x100d1, 0x0},
+       {0x1008c, 0x0},
+       {0x1008d, 0x0},
+       {0x10180, 0x0},
+       {0x10181, 0x0},
+       {0x101d0, 0x0},
+       {0x101d1, 0x0},
+       {0x1018c, 0x0},
+       {0x1018d, 0x0},
+       {0x100c0, 0x0},
+       {0x100c1, 0x0},
+       {0x101c0, 0x0},
+       {0x101c1, 0x0},
+       {0x102c0, 0x0},
+       {0x102c1, 0x0},
+       {0x103c0, 0x0},
+       {0x103c1, 0x0},
+       {0x104c0, 0x0},
+       {0x104c1, 0x0},
+       {0x105c0, 0x0},
+       {0x105c1, 0x0},
+       {0x106c0, 0x0},
+       {0x106c1, 0x0},
+       {0x107c0, 0x0},
+       {0x107c1, 0x0},
+       {0x108c0, 0x0},
+       {0x108c1, 0x0},
+       {0x100ae, 0x0},
+       {0x100af, 0x0},
+       {0x11020, 0x0},
+       {0x11080, 0x0},
+       {0x11081, 0x0},
+       {0x110d0, 0x0},
+       {0x110d1, 0x0},
+       {0x1108c, 0x0},
+       {0x1108d, 0x0},
+       {0x11180, 0x0},
+       {0x11181, 0x0},
+       {0x111d0, 0x0},
+       {0x111d1, 0x0},
+       {0x1118c, 0x0},
+       {0x1118d, 0x0},
+       {0x110c0, 0x0},
+       {0x110c1, 0x0},
+       {0x111c0, 0x0},
+       {0x111c1, 0x0},
+       {0x112c0, 0x0},
+       {0x112c1, 0x0},
+       {0x113c0, 0x0},
+       {0x113c1, 0x0},
+       {0x114c0, 0x0},
+       {0x114c1, 0x0},
+       {0x115c0, 0x0},
+       {0x115c1, 0x0},
+       {0x116c0, 0x0},
+       {0x116c1, 0x0},
+       {0x117c0, 0x0},
+       {0x117c1, 0x0},
+       {0x118c0, 0x0},
+       {0x118c1, 0x0},
+       {0x110ae, 0x0},
+       {0x110af, 0x0},
+       {0x90201, 0x0},
+       {0x90202, 0x0},
+       {0x90203, 0x0},
+       {0x90205, 0x0},
+       {0x90206, 0x0},
+       {0x90207, 0x0},
+       {0x90208, 0x0},
+       {0x20020, 0x0},
+       {0x20077, 0x0},
+       {0x20072, 0x0},
+       {0x20073, 0x0},
+       {0x400c0, 0x0},
+       {0x10040, 0x0},
+       {0x10140, 0x0},
+       {0x10240, 0x0},
+       {0x10340, 0x0},
+       {0x10440, 0x0},
+       {0x10540, 0x0},
+       {0x10640, 0x0},
+       {0x10740, 0x0},
+       {0x10840, 0x0},
+       {0x11040, 0x0},
+       {0x11140, 0x0},
+       {0x11240, 0x0},
+       {0x11340, 0x0},
+       {0x11440, 0x0},
+       {0x11540, 0x0},
+       {0x11640, 0x0},
+       {0x11740, 0x0},
+       {0x11840, 0x0},
+
+};
+
+/* P0 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_cfg[] = {
+       {0xd0000, 0x0},
+       {0x54003, 0xe94},
+       {0x54004, 0x4},
+       {0x54006, 0x15},
+       {0x54008, 0x131f},
+       {0x54009, 0xc8},
+       {0x5400b, 0x4},
+       {0x5400d, 0x100},
+       {0x5400f, 0x100},
+       {0x54012, 0x110},
+       {0x54019, 0x36e4},
+       {0x5401a, 0xf2},
+       {0x5401b, 0x1146},
+       {0x5401c, 0x1108},
+       {0x5401e, 0x4},
+       {0x5401f, 0x36e4},
+       {0x54020, 0xf2},
+       {0x54021, 0x1146},
+       {0x54022, 0x1108},
+       {0x54024, 0x4},
+       {0x54032, 0xe400},
+       {0x54033, 0xf236},
+       {0x54034, 0x4600},
+       {0x54035, 0x811},
+       {0x54036, 0x11},
+       {0x54037, 0x400},
+       {0x54038, 0xe400},
+       {0x54039, 0xf236},
+       {0x5403a, 0x4600},
+       {0x5403b, 0x811},
+       {0x5403c, 0x11},
+       {0x5403d, 0x400},
+       {0xd0000, 0x1}
+};
+
+/* P0 2D message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
+       {0xd0000, 0x0},
+       {0x54003, 0xe94},
+       {0x54004, 0x4},
+       {0x54006, 0x15},
+       {0x54008, 0x61},
+       {0x54009, 0xc8},
+       {0x5400b, 0x4},
+       {0x5400d, 0x100},
+       {0x5400f, 0x100},
+       {0x54010, 0x2080},
+       {0x54012, 0x110},
+       {0x54019, 0x36e4},
+       {0x5401a, 0xf2},
+       {0x5401b, 0x1146},
+       {0x5401c, 0x1108},
+       {0x5401e, 0x4},
+       {0x5401f, 0x36e4},
+       {0x54020, 0xf2},
+       {0x54021, 0x1146},
+       {0x54022, 0x1108},
+       {0x54024, 0x4},
+       {0x54032, 0xe400},
+       {0x54033, 0xf236},
+       {0x54034, 0x4600},
+       {0x54035, 0x811},
+       {0x54036, 0x11},
+       {0x54037, 0x400},
+       {0x54038, 0xe400},
+       {0x54039, 0xf236},
+       {0x5403a, 0x4600},
+       {0x5403b, 0x811},
+       {0x5403c, 0x11},
+       {0x5403d, 0x400},
+       {0xd0000, 0x1}
+};
+
+/* DRAM PHY init engine image */
+static struct dram_cfg_param ddr_phy_pie[] = {
+       {0xd0000, 0x0},
+       {0x90000, 0x10},
+       {0x90001, 0x400},
+       {0x90002, 0x10e},
+       {0x90003, 0x0},
+       {0x90004, 0x0},
+       {0x90005, 0x8},
+       {0x90029, 0xb},
+       {0x9002a, 0x480},
+       {0x9002b, 0x109},
+       {0x9002c, 0x8},
+       {0x9002d, 0x448},
+       {0x9002e, 0x139},
+       {0x9002f, 0x8},
+       {0x90030, 0x478},
+       {0x90031, 0x109},
+       {0x90032, 0x0},
+       {0x90033, 0xe8},
+       {0x90034, 0x109},
+       {0x90035, 0x2},
+       {0x90036, 0x10},
+       {0x90037, 0x139},
+       {0x90038, 0xb},
+       {0x90039, 0x7c0},
+       {0x9003a, 0x139},
+       {0x9003b, 0x44},
+       {0x9003c, 0x633},
+       {0x9003d, 0x159},
+       {0x9003e, 0x14f},
+       {0x9003f, 0x630},
+       {0x90040, 0x159},
+       {0x90041, 0x47},
+       {0x90042, 0x633},
+       {0x90043, 0x149},
+       {0x90044, 0x4f},
+       {0x90045, 0x633},
+       {0x90046, 0x179},
+       {0x90047, 0x8},
+       {0x90048, 0xe0},
+       {0x90049, 0x109},
+       {0x9004a, 0x0},
+       {0x9004b, 0x7c8},
+       {0x9004c, 0x109},
+       {0x9004d, 0x0},
+       {0x9004e, 0x1},
+       {0x9004f, 0x8},
+       {0x90050, 0x30},
+       {0x90051, 0x65a},
+       {0x90052, 0x9},
+       {0x90053, 0x0},
+       {0x90054, 0x45a},
+       {0x90055, 0x9},
+       {0x90056, 0x0},
+       {0x90057, 0x448},
+       {0x90058, 0x109},
+       {0x90059, 0x40},
+       {0x9005a, 0x633},
+       {0x9005b, 0x179},
+       {0x9005c, 0x1},
+       {0x9005d, 0x618},
+       {0x9005e, 0x109},
+       {0x9005f, 0x40c0},
+       {0x90060, 0x633},
+       {0x90061, 0x149},
+       {0x90062, 0x8},
+       {0x90063, 0x4},
+       {0x90064, 0x48},
+       {0x90065, 0x4040},
+       {0x90066, 0x633},
+       {0x90067, 0x149},
+       {0x90068, 0x0},
+       {0x90069, 0x4},
+       {0x9006a, 0x48},
+       {0x9006b, 0x40},
+       {0x9006c, 0x633},
+       {0x9006d, 0x149},
+       {0x9006e, 0x0},
+       {0x9006f, 0x658},
+       {0x90070, 0x109},
+       {0x90071, 0x10},
+       {0x90072, 0x4},
+       {0x90073, 0x18},
+       {0x90074, 0x0},
+       {0x90075, 0x4},
+       {0x90076, 0x78},
+       {0x90077, 0x549},
+       {0x90078, 0x633},
+       {0x90079, 0x159},
+       {0x9007a, 0xd49},
+       {0x9007b, 0x633},
+       {0x9007c, 0x159},
+       {0x9007d, 0x94a},
+       {0x9007e, 0x633},
+       {0x9007f, 0x159},
+       {0x90080, 0x441},
+       {0x90081, 0x633},
+       {0x90082, 0x149},
+       {0x90083, 0x42},
+       {0x90084, 0x633},
+       {0x90085, 0x149},
+       {0x90086, 0x1},
+       {0x90087, 0x633},
+       {0x90088, 0x149},
+       {0x90089, 0x0},
+       {0x9008a, 0xe0},
+       {0x9008b, 0x109},
+       {0x9008c, 0xa},
+       {0x9008d, 0x10},
+       {0x9008e, 0x109},
+       {0x9008f, 0x9},
+       {0x90090, 0x3c0},
+       {0x90091, 0x149},
+       {0x90092, 0x9},
+       {0x90093, 0x3c0},
+       {0x90094, 0x159},
+       {0x90095, 0x18},
+       {0x90096, 0x10},
+       {0x90097, 0x109},
+       {0x90098, 0x0},
+       {0x90099, 0x3c0},
+       {0x9009a, 0x109},
+       {0x9009b, 0x18},
+       {0x9009c, 0x4},
+       {0x9009d, 0x48},
+       {0x9009e, 0x18},
+       {0x9009f, 0x4},
+       {0x900a0, 0x58},
+       {0x900a1, 0xb},
+       {0x900a2, 0x10},
+       {0x900a3, 0x109},
+       {0x900a4, 0x1},
+       {0x900a5, 0x10},
+       {0x900a6, 0x109},
+       {0x900a7, 0x5},
+       {0x900a8, 0x7c0},
+       {0x900a9, 0x109},
+       {0x40000, 0x811},
+       {0x40020, 0x880},
+       {0x40040, 0x0},
+       {0x40060, 0x0},
+       {0x40001, 0x4008},
+       {0x40021, 0x83},
+       {0x40041, 0x4f},
+       {0x40061, 0x0},
+       {0x40002, 0x4040},
+       {0x40022, 0x83},
+       {0x40042, 0x51},
+       {0x40062, 0x0},
+       {0x40003, 0x811},
+       {0x40023, 0x880},
+       {0x40043, 0x0},
+       {0x40063, 0x0},
+       {0x40004, 0x720},
+       {0x40024, 0xf},
+       {0x40044, 0x1740},
+       {0x40064, 0x0},
+       {0x40005, 0x16},
+       {0x40025, 0x83},
+       {0x40045, 0x4b},
+       {0x40065, 0x0},
+       {0x40006, 0x716},
+       {0x40026, 0xf},
+       {0x40046, 0x2001},
+       {0x40066, 0x0},
+       {0x40007, 0x716},
+       {0x40027, 0xf},
+       {0x40047, 0x2800},
+       {0x40067, 0x0},
+       {0x40008, 0x716},
+       {0x40028, 0xf},
+       {0x40048, 0xf00},
+       {0x40068, 0x0},
+       {0x40009, 0x720},
+       {0x40029, 0xf},
+       {0x40049, 0x1400},
+       {0x40069, 0x0},
+       {0x4000a, 0xe08},
+       {0x4002a, 0xc15},
+       {0x4004a, 0x0},
+       {0x4006a, 0x0},
+       {0x4000b, 0x625},
+       {0x4002b, 0x15},
+       {0x4004b, 0x0},
+       {0x4006b, 0x0},
+       {0x4000c, 0x4028},
+       {0x4002c, 0x80},
+       {0x4004c, 0x0},
+       {0x4006c, 0x0},
+       {0x4000d, 0xe08},
+       {0x4002d, 0xc1a},
+       {0x4004d, 0x0},
+       {0x4006d, 0x0},
+       {0x4000e, 0x625},
+       {0x4002e, 0x1a},
+       {0x4004e, 0x0},
+       {0x4006e, 0x0},
+       {0x4000f, 0x4040},
+       {0x4002f, 0x80},
+       {0x4004f, 0x0},
+       {0x4006f, 0x0},
+       {0x40010, 0x2604},
+       {0x40030, 0x15},
+       {0x40050, 0x0},
+       {0x40070, 0x0},
+       {0x40011, 0x708},
+       {0x40031, 0x5},
+       {0x40051, 0x0},
+       {0x40071, 0x2002},
+       {0x40012, 0x8},
+       {0x40032, 0x80},
+       {0x40052, 0x0},
+       {0x40072, 0x0},
+       {0x40013, 0x2604},
+       {0x40033, 0x1a},
+       {0x40053, 0x0},
+       {0x40073, 0x0},
+       {0x40014, 0x708},
+       {0x40034, 0xa},
+       {0x40054, 0x0},
+       {0x40074, 0x2002},
+       {0x40015, 0x4040},
+       {0x40035, 0x80},
+       {0x40055, 0x0},
+       {0x40075, 0x0},
+       {0x40016, 0x60a},
+       {0x40036, 0x15},
+       {0x40056, 0x1200},
+       {0x40076, 0x0},
+       {0x40017, 0x61a},
+       {0x40037, 0x15},
+       {0x40057, 0x1300},
+       {0x40077, 0x0},
+       {0x40018, 0x60a},
+       {0x40038, 0x1a},
+       {0x40058, 0x1200},
+       {0x40078, 0x0},
+       {0x40019, 0x642},
+       {0x40039, 0x1a},
+       {0x40059, 0x1300},
+       {0x40079, 0x0},
+       {0x4001a, 0x4808},
+       {0x4003a, 0x880},
+       {0x4005a, 0x0},
+       {0x4007a, 0x0},
+       {0x900aa, 0x0},
+       {0x900ab, 0x790},
+       {0x900ac, 0x11a},
+       {0x900ad, 0x8},
+       {0x900ae, 0x7aa},
+       {0x900af, 0x2a},
+       {0x900b0, 0x10},
+       {0x900b1, 0x7b2},
+       {0x900b2, 0x2a},
+       {0x900b3, 0x0},
+       {0x900b4, 0x7c8},
+       {0x900b5, 0x109},
+       {0x900b6, 0x10},
+       {0x900b7, 0x10},
+       {0x900b8, 0x109},
+       {0x900b9, 0x10},
+       {0x900ba, 0x2a8},
+       {0x900bb, 0x129},
+       {0x900bc, 0x8},
+       {0x900bd, 0x370},
+       {0x900be, 0x129},
+       {0x900bf, 0xa},
+       {0x900c0, 0x3c8},
+       {0x900c1, 0x1a9},
+       {0x900c2, 0xc},
+       {0x900c3, 0x408},
+       {0x900c4, 0x199},
+       {0x900c5, 0x14},
+       {0x900c6, 0x790},
+       {0x900c7, 0x11a},
+       {0x900c8, 0x8},
+       {0x900c9, 0x4},
+       {0x900ca, 0x18},
+       {0x900cb, 0xe},
+       {0x900cc, 0x408},
+       {0x900cd, 0x199},
+       {0x900ce, 0x8},
+       {0x900cf, 0x8568},
+       {0x900d0, 0x108},
+       {0x900d1, 0x18},
+       {0x900d2, 0x790},
+       {0x900d3, 0x16a},
+       {0x900d4, 0x8},
+       {0x900d5, 0x1d8},
+       {0x900d6, 0x169},
+       {0x900d7, 0x10},
+       {0x900d8, 0x8558},
+       {0x900d9, 0x168},
+       {0x900da, 0x1ff8},
+       {0x900db, 0x85a8},
+       {0x900dc, 0x1e8},
+       {0x900dd, 0x50},
+       {0x900de, 0x798},
+       {0x900df, 0x16a},
+       {0x900e0, 0x60},
+       {0x900e1, 0x7a0},
+       {0x900e2, 0x16a},
+       {0x900e3, 0x8},
+       {0x900e4, 0x8310},
+       {0x900e5, 0x168},
+       {0x900e6, 0x8},
+       {0x900e7, 0xa310},
+       {0x900e8, 0x168},
+       {0x900e9, 0xa},
+       {0x900ea, 0x408},
+       {0x900eb, 0x169},
+       {0x900ec, 0x6e},
+       {0x900ed, 0x0},
+       {0x900ee, 0x68},
+       {0x900ef, 0x0},
+       {0x900f0, 0x408},
+       {0x900f1, 0x169},
+       {0x900f2, 0x0},
+       {0x900f3, 0x8310},
+       {0x900f4, 0x168},
+       {0x900f5, 0x0},
+       {0x900f6, 0xa310},
+       {0x900f7, 0x168},
+       {0x900f8, 0x1ff8},
+       {0x900f9, 0x85a8},
+       {0x900fa, 0x1e8},
+       {0x900fb, 0x68},
+       {0x900fc, 0x798},
+       {0x900fd, 0x16a},
+       {0x900fe, 0x78},
+       {0x900ff, 0x7a0},
+       {0x90100, 0x16a},
+       {0x90101, 0x68},
+       {0x90102, 0x790},
+       {0x90103, 0x16a},
+       {0x90104, 0x8},
+       {0x90105, 0x8b10},
+       {0x90106, 0x168},
+       {0x90107, 0x8},
+       {0x90108, 0xab10},
+       {0x90109, 0x168},
+       {0x9010a, 0xa},
+       {0x9010b, 0x408},
+       {0x9010c, 0x169},
+       {0x9010d, 0x58},
+       {0x9010e, 0x0},
+       {0x9010f, 0x68},
+       {0x90110, 0x0},
+       {0x90111, 0x408},
+       {0x90112, 0x169},
+       {0x90113, 0x0},
+       {0x90114, 0x8b10},
+       {0x90115, 0x168},
+       {0x90116, 0x1},
+       {0x90117, 0xab10},
+       {0x90118, 0x168},
+       {0x90119, 0x0},
+       {0x9011a, 0x1d8},
+       {0x9011b, 0x169},
+       {0x9011c, 0x80},
+       {0x9011d, 0x790},
+       {0x9011e, 0x16a},
+       {0x9011f, 0x18},
+       {0x90120, 0x7aa},
+       {0x90121, 0x6a},
+       {0x90122, 0xa},
+       {0x90123, 0x0},
+       {0x90124, 0x1e9},
+       {0x90125, 0x8},
+       {0x90126, 0x8080},
+       {0x90127, 0x108},
+       {0x90128, 0xf},
+       {0x90129, 0x408},
+       {0x9012a, 0x169},
+       {0x9012b, 0xc},
+       {0x9012c, 0x0},
+       {0x9012d, 0x68},
+       {0x9012e, 0x9},
+       {0x9012f, 0x0},
+       {0x90130, 0x1a9},
+       {0x90131, 0x0},
+       {0x90132, 0x408},
+       {0x90133, 0x169},
+       {0x90134, 0x0},
+       {0x90135, 0x8080},
+       {0x90136, 0x108},
+       {0x90137, 0x8},
+       {0x90138, 0x7aa},
+       {0x90139, 0x6a},
+       {0x9013a, 0x0},
+       {0x9013b, 0x8568},
+       {0x9013c, 0x108},
+       {0x9013d, 0xb7},
+       {0x9013e, 0x790},
+       {0x9013f, 0x16a},
+       {0x90140, 0x1f},
+       {0x90141, 0x0},
+       {0x90142, 0x68},
+       {0x90143, 0x8},
+       {0x90144, 0x8558},
+       {0x90145, 0x168},
+       {0x90146, 0xf},
+       {0x90147, 0x408},
+       {0x90148, 0x169},
+       {0x90149, 0xd},
+       {0x9014a, 0x0},
+       {0x9014b, 0x68},
+       {0x9014c, 0x0},
+       {0x9014d, 0x408},
+       {0x9014e, 0x169},
+       {0x9014f, 0x0},
+       {0x90150, 0x8558},
+       {0x90151, 0x168},
+       {0x90152, 0x8},
+       {0x90153, 0x3c8},
+       {0x90154, 0x1a9},
+       {0x90155, 0x3},
+       {0x90156, 0x370},
+       {0x90157, 0x129},
+       {0x90158, 0x20},
+       {0x90159, 0x2aa},
+       {0x9015a, 0x9},
+       {0x9015b, 0x8},
+       {0x9015c, 0xe8},
+       {0x9015d, 0x109},
+       {0x9015e, 0x0},
+       {0x9015f, 0x8140},
+       {0x90160, 0x10c},
+       {0x90161, 0x10},
+       {0x90162, 0x8138},
+       {0x90163, 0x104},
+       {0x90164, 0x8},
+       {0x90165, 0x448},
+       {0x90166, 0x109},
+       {0x90167, 0xf},
+       {0x90168, 0x7c0},
+       {0x90169, 0x109},
+       {0x9016a, 0x0},
+       {0x9016b, 0xe8},
+       {0x9016c, 0x109},
+       {0x9016d, 0x47},
+       {0x9016e, 0x630},
+       {0x9016f, 0x109},
+       {0x90170, 0x8},
+       {0x90171, 0x618},
+       {0x90172, 0x109},
+       {0x90173, 0x8},
+       {0x90174, 0xe0},
+       {0x90175, 0x109},
+       {0x90176, 0x0},
+       {0x90177, 0x7c8},
+       {0x90178, 0x109},
+       {0x90179, 0x8},
+       {0x9017a, 0x8140},
+       {0x9017b, 0x10c},
+       {0x9017c, 0x0},
+       {0x9017d, 0x478},
+       {0x9017e, 0x109},
+       {0x9017f, 0x0},
+       {0x90180, 0x1},
+       {0x90181, 0x8},
+       {0x90182, 0x8},
+       {0x90183, 0x4},
+       {0x90184, 0x0},
+       {0x90006, 0x8},
+       {0x90007, 0x7c8},
+       {0x90008, 0x109},
+       {0x90009, 0x0},
+       {0x9000a, 0x400},
+       {0x9000b, 0x106},
+       {0xd00e7, 0x400},
+       {0x90017, 0x0},
+       {0x9001f, 0x2b},
+       {0x90026, 0x69},
+       {0x400d0, 0x0},
+       {0x400d1, 0x101},
+       {0x400d2, 0x105},
+       {0x400d3, 0x107},
+       {0x400d4, 0x10f},
+       {0x400d5, 0x202},
+       {0x400d6, 0x20a},
+       {0x400d7, 0x20b},
+       {0x2003a, 0x2},
+       {0x200be, 0x3},
+       {0x2000b, 0x75},
+       {0x2000c, 0xe9},
+       {0x2000d, 0x91c},
+       {0x2000e, 0x2c},
+       {0x9000c, 0x0},
+       {0x9000d, 0x173},
+       {0x9000e, 0x60},
+       {0x9000f, 0x6110},
+       {0x90010, 0x2152},
+       {0x90011, 0xdfbd},
+       {0x90012, 0x2060},
+       {0x90013, 0x6152},
+       {0x20010, 0x5a},
+       {0x20011, 0x3},
+       {0x40080, 0xe0},
+       {0x40081, 0x12},
+       {0x40082, 0xe0},
+       {0x40083, 0x12},
+       {0x40084, 0xe0},
+       {0x40085, 0x12},
+       {0x400fd, 0xf},
+       {0x400f1, 0xe},
+       {0x10011, 0x1},
+       {0x10012, 0x1},
+       {0x10013, 0x180},
+       {0x10018, 0x1},
+       {0x10002, 0x6209},
+       {0x100b2, 0x1},
+       {0x101b4, 0x1},
+       {0x102b4, 0x1},
+       {0x103b4, 0x1},
+       {0x104b4, 0x1},
+       {0x105b4, 0x1},
+       {0x106b4, 0x1},
+       {0x107b4, 0x1},
+       {0x108b4, 0x1},
+       {0x11011, 0x1},
+       {0x11012, 0x1},
+       {0x11013, 0x180},
+       {0x11018, 0x1},
+       {0x11002, 0x6209},
+       {0x110b2, 0x1},
+       {0x111b4, 0x1},
+       {0x112b4, 0x1},
+       {0x113b4, 0x1},
+       {0x114b4, 0x1},
+       {0x115b4, 0x1},
+       {0x116b4, 0x1},
+       {0x117b4, 0x1},
+       {0x118b4, 0x1},
+       {0x20089, 0x1},
+       {0x20088, 0x19},
+       {0xc0080, 0x0},
+       {0xd0000, 0x1},
+
+};
+
+static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
+       {
+               /* P0 3733mts 1D */
+               .drate = 3733,
+               .fw_type = FW_1D_IMAGE,
+               .fsp_cfg = ddr_fsp0_cfg,
+               .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
+
+       },
+
+       {
+               /* P0 3733mts 2D */
+               .drate = 3733,
+               .fw_type = FW_2D_IMAGE,
+               .fsp_cfg = ddr_fsp0_2d_cfg,
+               .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
+       },
+
+};
+
+/* ddr timing config params */
+struct dram_timing_info dram_timing = {
+       .ddrc_cfg = ddr_ddrc_cfg,
+       .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
+       .ddrphy_cfg = ddr_ddrphy_cfg,
+       .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
+       .fsp_msg = ddr_dram_fsp_msg,
+       .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
+       .ddrphy_trained_csr = ddr_ddrphy_trained_csr,
+       .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
+       .ddrphy_pie = ddr_phy_pie,
+       .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
+       .fsp_table = { 3733, },
+       .fsp_cfg = ddr_dram_fsp_cfg,
+       .fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
+};
board/phytec/imx93_phycore/spl.c new file +181 -0
new file mode 100644
index 00000000000..6911f2800ad
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ */
+
+#include <command.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/imx93_pins.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/arch-mx7ulp/gpio.h>
+#include <asm/sections.h>
+#include <asm/mach-imx/syscounter.h>
+#include <asm/mach-imx/ele_api.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+#include <linux/delay.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ccm_regs.h>
+#include <asm/arch/ddr.h>
+#include <power/pmic.h>
+#include <power/pca9450.h>
+#include <asm/arch/trdc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Will be part of drivers/power/regulator/pca9450.c
+ * when pca9451a support is added.
+ */
+#define PCA9450_REG_PWRCTRL_TOFF_DEB    BIT(5)
+
+int spl_board_boot_device(enum boot_device boot_dev_spl)
+{
+       if (IS_ENABLED(CONFIG_SPL_BOOTROM_SUPPORT))
+               return BOOT_DEVICE_BOOTROM;
+
+       switch (boot_dev_spl) {
+       case SD1_BOOT:
+       case MMC1_BOOT:
+               return BOOT_DEVICE_MMC1;
+       case SD2_BOOT:
+       case MMC2_BOOT:
+               return BOOT_DEVICE_MMC2;
+       default:
+               return BOOT_DEVICE_NONE;
+       }
+}
+
+void spl_board_init(void)
+{
+       puts("Normal Boot\n");
+}
+
+void spl_dram_init(void)
+{
+       ddr_init(&dram_timing);
+}
+
+int power_init_board(void)
+{
+       struct udevice *dev;
+       int ret;
+       unsigned int val = 0;
+
+       if (!IS_ENABLED(CONFIG_DM_PMIC_PCA9450))
+               return 0;
+
+       ret = pmic_get("pmic@25", &dev);
+       if (ret == -ENODEV) {
+               puts("No pca9450@25\n");
+               return 0;
+       }
+       if (ret != 0)
+               return ret;
+
+       /* BUCKxOUT_DVS0/1 control BUCK123 output */
+       pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
+
+       /* enable DVS control through PMIC_STBY_REQ */
+       pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
+
+       ret = pmic_reg_read(dev, PCA9450_PWR_CTRL);
+       if (ret < 0)
+               return ret;
+
+       val = ret;
+       if (IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)) {
+               /* 0.8v for Low drive mode
+                */
+               if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) {
+                       pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x0c);
+                       pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x0c);
+               } else {
+                       pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x10);
+                       pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x10);
+               }
+       } else {
+               /* 0.9v for Over drive mode
+                */
+               if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) {
+                       pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14);
+                       pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x14);
+               } else {
+                       pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x18);
+                       pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x18);
+               }
+       }
+
+       /* set standby voltage to 0.65v */
+       if (val & PCA9450_REG_PWRCTRL_TOFF_DEB)
+               pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x0);
+       else
+               pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x4);
+
+       /* I2C_LT_EN*/
+       pmic_reg_write(dev, 0xa, 0x3);
+
+       return 0;
+}
+
+extern int imx9_probe_mu(void *ctx, struct event *event);
+void board_init_f(ulong dummy)
+{
+       int ret;
+
+       /* Clear the BSS. */
+       memset(__bss_start, 0, __bss_end - __bss_start);
+
+       timer_init();
+
+       arch_cpu_init();
+
+       board_early_init_f();
+
+       spl_early_init();
+
+       preloader_console_init();
+
+       ret = imx9_probe_mu(NULL, NULL);
+       if (ret) {
+               printf("Fail to init ELE API\n");
+       } else {
+               printf("SOC: 0x%x\n", gd->arch.soc_rev);
+               printf("LC: 0x%x\n", gd->arch.lifecycle);
+       }
+
+       power_init_board();
+
+       if (!IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE))
+               set_arm_core_max_clk();
+
+       /* Init power of mix */
+       soc_power_init();
+
+       /* Setup TRDC for DDR access */
+       trdc_init();
+
+       /* DDR initialization */
+       spl_dram_init();
+
+       /* Put M33 into CPUWAIT for following kick */
+       ret = m33_prepare();
+       if (!ret)
+               printf("M33 prepare ok\n");
+
+       board_init_r(NULL, 0);
+}
configs/imx93_phycore_defconfig new file +147 -0
new file mode 100644
index 00000000000..4d9d790e0f6
@@ -0,0 +1,147 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX9=y
+CONFIG_TEXT_BASE=0x80200000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_OFFSET=0x700000
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx93-phycore-segin"
+CONFIG_SPL_TEXT_BASE=0x2049A000
+CONFIG_TARGET_IMX93_PHYCORE=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x20519dd0
+CONFIG_SPL=y
+CONFIG_CMD_DEKBLOB=y
+CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_SYS_LOAD_ADDR=0x80400000
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x90000000
+CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=1
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTCOMMAND="run distro_bootcmd;run bsp_bootcmd"
+CONFIG_DEFAULT_FDT_FILE="imx93-phycore-segin.dtb"
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x26000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x2051a000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2074
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_WDT=y
+CONFIG_BOOTP_PREFER_SERVERIP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_RTC=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GETTIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_SOURCE_FILE="imx93_phycore"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eth1"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SYSCON=y
+CONFIG_SPL_CLK_IMX93=y
+CONFIG_CLK_IMX93=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_GPIO_HOG=y
+CONFIG_IMX_RGPIO2P=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_IMX=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_MIPI_DPHY_HELPERS=y
+CONFIG_PHY_IMX93_MIPI_DPHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX93=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX93_BLK_CTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PCA9450=y
+CONFIG_SPL_DM_PMIC_PCA9450=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PCA9450=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2131=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
+CONFIG_ULP_WATCHDOG=y
+CONFIG_WDT=y
+CONFIG_LZO=y
+CONFIG_BZIP2=y
doc/board/phytec/imx93_phycore.rst new file +68 -0
new file mode 100644
index 00000000000..f9b87691cdc
@@ -0,0 +1,68 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx93_phytec
+============
+
+U-Boot for the NXP i.MX93 Phytec SoM of a Segin board
+
+Quick Start
+-----------
+
+- Get and Build the ARM Trusted firmware
+- Get the DDR firmware
+- Get ahab-container.img
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://github.com/nxp-imx/imx-atf/
+branch: lf_v2.8
+
+.. code-block:: bash
+
+   $ unset LDFLAGS
+   $ make PLAT=imx93 bl31
+   $ cp build/imx93/release/bl31.bin $(srctree)
+
+Get the DDR firmware
+--------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin
+   $ chmod +x firmware-imx-8.21.bin
+   $ ./firmware-imx-8.21.bin
+   $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+
+Get ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
+   $ chmod +x firmware-sentinel-0.10.bin
+   $ ./firmware-sentinel-0.10.bin
+   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-
+   $ make imx93_phytec_defconfig
+   $ make
+
+Burn the flash.bin to MicroSD card offset 32KB:
+
+.. code-block:: bash
+
+   $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+
+Set Boot switch to SD boot
doc/board/phytec/index.rst +1 -0
index 9996bce9741..a740f0cbae4 100644
@@ -7,5 +7,6 @@ PHYTEC
    :maxdepth: 2
 
    imx8mm-phygate-tauri-l
+   imx93_phycore
    phycore-imx8mm
    phycore-imx8mp
include/configs/imx93_phycore.h new file +47 -1
new file mode 100644
index 00000000000..ee1322c9b52
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ */
+
+#ifndef __IMX93_PHYCORE_H
+#define __IMX93_PHYCORE_H
+
+#include <linux/sizes.h>
+#include <linux/stringify.h>
+#include <asm/arch/imx-regs.h>
+
+#define CFG_SYS_UBOOT_BASE     \
+       (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 0) \
+       func(MMC, mmc, 1)
+
+#include <config_distro_bootcmd.h>
+
+/* Initial environment variables */
+#define CFG_EXTRA_ENV_SETTINGS BOOTENV
+
+#define CFG_SYS_INIT_RAM_ADDR        0x80000000
+#define CFG_SYS_INIT_RAM_SIZE        0x200000
+
+#define CFG_SYS_SDRAM_BASE           0x80000000
+#define PHYS_SDRAM                   0x80000000
+#define PHYS_SDRAM_SIZE              0x80000000
+
+#define CFG_SYS_FSL_USDHC_NUM  2
+
+/* Using ULP WDOG for reset */
+#define WDOG_BASE_ADDR          WDG3_BASE_ADDR
+
+#if defined(CONFIG_CMD_NET)
+#define PHY_ANEG_TIMEOUT 20000
+#endif
+
+#ifdef CONFIG_IMX_MATTER_TRUSTY
+#define NS_ARCH_ARM64 1
+#endif
+
+#endif
--

2.41.0

#2 lore raw
In reply to Mathieu Othacehe

Hi Mathieu,

I already gave my review on the kernel mailing list.

As first step, naming scheme is not compatible with PHYTEC naming convention. Please fix it across the entire patch. Maybe reference downstream u-boot for that?

Please also use "phyBOARD-Segin-i.MX93" when referencing the board as this is the official board name.

Quoted 4 lines · Mathieu Othacehe

Add support for the Phytec i.MX93 Segin evaluation kit. The SoM consists of an NXP i.MX93 dual A55 CPU. The SoM is mounted on a Phytec Segin SBC.

Quoted 11 lines
---
 arch/arm/dts/Makefile                         |    3 +-
 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi  |  274 +++
 arch/arm/dts/imx93-phycore-segin.dts          |   95 +>  arch/arm/dts/imx93-phycore-som.dtsi           |   64 +
 arch/arm/mach-imx/imx9/Kconfig                |    6 +
 board/phytec/common/mmc.c                     |   49 +
 board/phytec/imx93_phycore/Kconfig            |   21 +
 board/phytec/imx93_phycore/MAINTAINERS        |   10 +
 board/phytec/imx93_phycore/Makefile           |   16 +
 board/phytec/imx93_phycore/imx93_phycore.c    |   89 +
 board/phytec/imx93_phycore/imx93_phycore.env  |   96 +

s/imx93_phycore/phycore_imx93

To fit into existing PHYTEC boards already in tree.

Quoted 1 line
 .../phytec/imx93_phycore/lpddr4_timing_1GB.c  | 1546 +++++++++++++++++

Remove _1GB suffix.

PHYTEC DRAM auto-detection will follow later.

Quoted 2 lines
 board/phytec/imx93_phycore/spl.c              |  181 ++
 configs/imx93_phycore_defconfig               |  147 ++

should be phycore-imx93_defconfig

Quoted 24 lines
 doc/board/phytec/imx93_phycore.rst            |   68 +
 doc/board/phytec/index.rst                    |    1 +
 include/configs/imx93_phycore.h               |   47 +
 17 files changed, 2712 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx93-phycore-segin.dts
 create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi
 create mode 100644 board/phytec/common/mmc.c
 create mode 100644 board/phytec/imx93_phycore/Kconfig
 create mode 100644 board/phytec/imx93_phycore/MAINTAINERS
 create mode 100644 board/phytec/imx93_phycore/Makefile
 create mode 100644 board/phytec/imx93_phycore/imx93_phycore.c
 create mode 100644 board/phytec/imx93_phycore/imx93_phycore.env
 create mode 100644 board/phytec/imx93_phycore/lpddr4_timing_1GB.c
 create mode 100644 board/phytec/imx93_phycore/spl.c
 create mode 100644 configs/imx93_phycore_defconfig
 create mode 100644 doc/board/phytec/imx93_phycore.rst
 create mode 100644 include/configs/imx93_phycore.h
arch/arm/dts/Makefile +0 -0
index d456a524b36..4a23e2a2f49 100644

arch/arm/dts/Makefile dtb-$(CONFIG_ARCH_IMX8M) += \ · line 1131

Quoted 6 lines
arch/arm/dts/Makefile +2 -1
@@ -1127,7 +1127,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 
 dtb-$(CONFIG_ARCH_IMX9) += \
 	imx93-11x11-evk.dtb \
-	imx93-var-som-symphony.dtb
+	imx93-var-som-symphony.dtb \
+	imx93-phycore-segin.dtb

s/imx93-phycore-segin/imx93-phyboard-segin

Quoted 9 lines
arch/arm/dts/Makefile +0 -0
 dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
 	imxrt1020-evk.dtb \
arch/arm/dts/imx93-phycore-segin-u-boot.dtsi new file +0 -0
new file mode 100644
index 00000000000..6d75f1985aa

arch/arm/dts/imx93-phycore-segin-u-boot.dtsi line 10

Quoted 10 lines
arch/arm/dts/imx93-phycore-segin-u-boot.dtsi new file +10 -0
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ *
+ * Product homepage:
+ * phyBOARD-Segin carrier board is reused for the i.MX93 design.
+ * https://www.phytec.de/produkte/single-board-computer/phyboard-segin-imx6ul/
+ */
+

Please sync header with what you have sent to linux mailing lists.

arch/arm/dts/imx93-phycore-segin.dts

Quoted 268 lines
arch/arm/dts/imx93-phycore-segin-u-boot.dtsi new file +263 -0
+#include "imx93-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog3>;
+		bootph-pre-ram;
+		bootph-some-ram;
+	};
+
+	aliases {
+		ethernet0 = &eqos;> +		ethernet1 = &fec;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&{/soc@0} {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+&aips1 {
+	bootph-pre-ram;
+	bootph-all;
+};
+
+&aips2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&aips3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&iomuxc {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+	bootph-pre-ram;
+};
+
+&pinctrl_uart1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&pinctrl_usdhc2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio4 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&lpuart1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&usdhc1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&usdhc2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+	fsl,signal-voltage-switch-extra-delay-ms = <8>;
+};
+
+&lpi2c1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&lpi2c2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&lpi2c3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&s4muap {
+	bootph-pre-ram;
+	bootph-some-ram;
+	status = "okay";
+};
+
+&clk {
+	bootph-all;
+	bootph-pre-ram;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
+	/delete-property/ assigned-clock-parents;
+};
+
+&osc_32k {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+&osc_24m {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+&clk_ext1 {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+/*
+ * The two nodes below won't be needed once nxp,pca9451a
+ * support is added to the Linux kernel.
+ */
+&iomuxc {
+	pinctrl_lpi2c3: lpi2c3grp {
+	bootph-pre-ram;
+	fsl,pins = <
+		MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
+		MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
+	>;
+	};
+};
+
+&lpi2c3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	pmic@25 {
+		bootph-pre-ram;
+		bootph-some-ram;
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+
+		regulators {
+			bootph-pre-ram;
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
arch/arm/dts/imx93-phycore-segin.dts new file +0 -0
new file mode 100644
index 00000000000..a843b322a07

Rename to imx93-phyboard-segin.dts and see my linux kernel mailing list comments.

Quoted 171 lines
arch/arm/dts/imx93-phycore-segin.dts new file +95 -0
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ * Copyright (C) 2024 Mathieu Othacehe <[email protected]>
+ *
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phycore-segin", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	clocks = <&clk IMX93_CLK_LPUART1_GATE>, <&clk IMX93_CLK_LPUART1_GATE>;
+	clock-names = "ipg", "per";
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	status = "okay";
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x178e
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
arch/arm/dts/imx93-phycore-som.dtsi new file +64 -0
new file mode 100644
index 00000000000..4edff4a50b2
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ * Copyright (C) 2024 Mathieu Othacehe <[email protected]>
+ *
+ */
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		ele_reserved: ele-reserved@a4120000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4120000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+};
arch/arm/mach-imx/imx9/Kconfig +0 -0
index 961d6f527ab..0c1459c5cde 100644

arch/arm/mach-imx/imx9/Kconfig config TARGET_IMX93_VAR_SOM · line 40

Quoted 4 lines
arch/arm/mach-imx/imx9/Kconfig +1 -0
@@ -37,10 +37,16 @@ config TARGET_IMX93_VAR_SOM
 	select IMX93
 	select IMX9_LPDDR4X
 
+config TARGET_IMX93_PHYCORE

s/TARGET_IMX93_PHYCORE/TARGET_PHYCORE_IMX93

arch/arm/mach-imx/imx9/Kconfig config TARGET_IMX93_VAR_SOM · line 41

Quoted 1 line
arch/arm/mach-imx/imx9/Kconfig +1 -0
+	bool "imx93_phycore"

s/imx93_phycore/phycore_imx93

board/phytec/common/mmc.c

Quoted 16 lines
arch/arm/mach-imx/imx9/Kconfig +4 -0
+	select IMX93
+	select IMX9_LPDDR4X
+
 endchoice
 
 source "board/freescale/imx93_evk/Kconfig"
 source "board/variscite/imx93_var_som/Kconfig"
+source "board/phytec/imx93_phycore/Kconfig"
 
 endif
 
board/phytec/common/mmc.c new file +0 -0
new file mode 100644
index 00000000000..d747aef232f

Couldn't you put this somewhere really common?

Quoted 59 lines
board/phytec/common/mmc.c new file +49 -0
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018-2022 NXP
+ */
+
+#include <command.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <stdbool.h>
+#include <vsprintf.h>
+#include <mmc.h>
+#include <env.h>
+
+static int check_mmc_autodetect(void)
+{
+	char *autodetect_str = env_get("mmcautodetect");
+
+	if (autodetect_str && !strcmp(autodetect_str, "yes"))
+		return 1;
+
+	return 0;
+}
+
+/* This should be defined for each board */
+__weak int mmc_map_to_kernel_blk(int dev_no)
+{
+	return dev_no;
+}
+
+void board_late_mmc_env_init(void)
+{
+	char cmd[32];
+	char mmcblk[32];
+	u32 dev_no = mmc_get_env_dev();
+
+	if (!check_mmc_autodetect())
+		return;
+
+	env_set_ulong("mmcdev", dev_no);
+
+	/* Set mmcblk env */
+	sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", mmc_map_to_kernel_blk(dev_no));
+	env_set("mmcroot", mmcblk);
+
+	sprintf(cmd, "mmc dev %d", dev_no);
+	run_command(cmd, 0);
+}
board/phytec/imx93_phycore/Kconfig new file +3 -0
new file mode 100644
index 00000000000..344df57afb0
@@ -0,0 +1,21 @@
+
+if TARGET_IMX93_PHYCORE
+

board/phytec/imx93_phycore/Kconfig line 13

Quoted 10 lines
board/phytec/imx93_phycore/Kconfig new file +10 -0
+config SYS_BOARD
+	default "imx93_phycore"
+
+config SYS_VENDOR
+	default "phytec"
+
+config SYS_CONFIG_NAME
+	default "imx93_phycore"
+
+config IMX93_PHYCORE_LPDDR4X_1GB

No need for this Kconfig option.

You only have 1GB RAM configuration.

Quoted 14 lines
board/phytec/imx93_phycore/Kconfig new file +8 -0
+	bool "Using LPDDR4X Timing and size of 1GB"
+	default y
+	select IMX9_LPDDR4X
+	help
+	  Select the LPDDR4X timing and size of 1GB
+
+          This sets the LPDDR4X timing and size of 1GB.
+endif
board/phytec/imx93_phycore/MAINTAINERS new file +0 -0
new file mode 100644
index 00000000000..deea6f36327

board/phytec/imx93_phycore/MAINTAINERS line 3

Quoted 3 lines
board/phytec/imx93_phycore/MAINTAINERS new file +3 -0
@@ -0,0 +1,10 @@
+phyCORE-i.MX93
+M:	Mathieu Othacehe <[email protected]>
+W:      https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/

Please link to .eu website which is in english by default.

https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/

Quoted 52 lines
board/phytec/imx93_phycore/MAINTAINERS new file +7 -0
+S:      Maintained
+F:      arch/arm/dts/imx93-phycore-segin.dts
+F:      arch/arm/dts/imx93-phycore-som.dtsi
+F:      arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
+F:      board/phytec/imx93_phycore/
+F:      configs/imx93_phycore_defconfig
+F:      include/configs/imx93_phycore.h
board/phytec/imx93_phycore/Makefile new file +16 -0
new file mode 100644
index 00000000000..058663b7f8a
@@ -0,0 +1,16 @@
+#
+# Copyright 2022 NXP
+# Copyright (C) 2023 PHYTEC Messtechnik GmbH
+# Christoph Stoidner <[email protected]>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += imx93_phycore.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_IMX93_PHYCORE_LPDDR4X_1GB) += lpddr4_timing_1GB.o
+else
+obj-y += ../common/mmc.o
+endif
board/phytec/imx93_phycore/imx93_phycore.c new file +17 -0
new file mode 100644
index 00000000000..2a434637399
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ */
+
+#include <env.h>
+#include <init.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/global_data.h>
+#include <asm/arch-imx9/ccm_regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch-imx9/imx93_pins.h>
+#include <asm/arch/clock.h>
+#include <power/pmic.h>

board/phytec/imx93_phycore/imx93_phycore.c line 27

Quoted 10 lines
board/phytec/imx93_phycore/imx93_phycore.c new file +10 -0
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <usb.h>
+#include <dwc3-uboot.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL	(PAD_CTL_DSE(6) | PAD_CTL_FSEL2)
+#define WDOG_PAD_CTRL	(PAD_CTL_DSE(6) | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)

Remove unused WDOG_PAD_CTL

board/phytec/imx93_phycore/imx93_phycore.c line 38

Quoted 11 lines
board/phytec/imx93_phycore/imx93_phycore.c new file +11 -0
+
+static const iomux_v3_cfg_t uart_pads[] = {
+	MX93_PAD_UART1_RXD__LPUART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX93_PAD_UART1_TXD__LPUART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+
+	init_uart_clk(LPUART1_CLK_ROOT);

Isn't this already handled by the DM?

We removed this in downstream u-boot-imx already.

board/phytec/imx93_phycore/imx93_phycore.c line 45

Quoted 7 lines
board/phytec/imx93_phycore/imx93_phycore.c new file +7 -0
+
+	return 0;
+}
+
+static int setup_fec(void)
+{
+	return set_clk_enet(ENET_125MHZ);

Again handled already by the DM?

Quoted 21 lines
board/phytec/imx93_phycore/imx93_phycore.c new file +21 -0
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);> +
+	return 0;
+}
+
+static int setup_eqos(void)
+{
+	struct blk_ctrl_wakeupmix_regs *bctrl =
+		(struct blk_ctrl_wakeupmix_regs *)BLK_CTRL_WAKEUPMIX_BASE_ADDR;
+
+	/* set INTF as RGMII, enable RGMII TXC clock */
+	clrsetbits_le32(&bctrl->eqos_gpr,
+			BCTRL_GPR_ENET_QOS_INTF_MODE_MASK,
+			BCTRL_GPR_ENET_QOS_INTF_SEL_RGMII | BCTRL_GPR_ENET_QOS_CLK_GEN_EN);
+
+	return set_clk_eqos(ENET_125MHZ);
+

board/phytec/imx93_phycore/imx93_phycore.c line 77

Quoted 10 lines
board/phytec/imx93_phycore/imx93_phycore.c new file +10 -0
+	return 0;
+}
+
+int board_init(void)
+{
+	if (IS_ENABLED(CONFIG_FEC_MXC))
+		setup_fec();
+
+	if (IS_ENABLED(CONFIG_DWC_ETH_QOS))
+		setup_eqos();

Did you check and eqos works?

If not remove it...

Quoted 105 lines
board/phytec/imx93_phycore/imx93_phycore.c new file +12 -0
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	env_set("sec_boot", "no");
+	if (IS_ENABLED(CONFIG_AHAB_BOOT))
+		env_set("sec_boot", "yes");
+
+	return 0;
+}
board/phytec/imx93_phycore/imx93_phycore.env new file +87 -0
new file mode 100644
index 00000000000..75f28459b77
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+image=Image
+console=ttyLP0
+fdt_addr=0x83000000
+fdto_addr=0x830c0000
+bootenv_addr=0x83500000
+fdt_file=CONFIG_DEFAULT_FDT_FILE
+ipaddr=192.168.3.11
+serverip=192.168.3.10
+netmask=255.255.255.0
+ip_dyn=no
+bootenv=bootenv.txt
+mmc_load_bootenv=fatload mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv}
+mmcdev=__stringify(CONFIG_SYS_MMC_ENV_DEV)
+mmcpart=1
+mmcroot=2
+mmcautodetect=yes
+mmcargs=setenv bootargs console=${console},${baudrate} earlycon
+	root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw
+loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
+loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}
+mmc_load_overlay=fatload mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay}
+mmc_apply_overlays=
+	fdt address ${fdt_addr};
+	for overlay in ${overlays};
+	do;
+		if run mmc_load_overlay; then
+			fdt resize ${filesize};
+			fdt apply ${fdto_addr};
+		fi;
+	done;
+mmcboot=
+	echo Booting from mmc ...;
+	if run mmc_load_bootenv; then
+		env import -t ${bootenv_addr} ${filesize};
+	fi;
+	run mmcargs;
+	if run loadfdt; then
+		run mmc_apply_overlays;
+		booti ${loadaddr} - ${fdt_addr};
+	else
+		echo WARN: Cannot load the DT;
+	fi;
+nfsroot=/nfs
+netargs=setenv bootargs console=${console},${baudrate} earlycon
+	root=/dev/nfs ip=${nfsip} nfsroot=${serverip}:${nfsroot},v3,tcp
+net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
+net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
+net_apply_overlays=
+	fdt address ${fdt_addr};
+	for overlay in ${overlays};
+	do;
+		if run net_load_overlay; then
+			fdt resize ${filesize};
+			fdt apply ${fdto_addr};
+		fi;
+	done;
+netboot=
+	echo Booting from net ...;
+	if test ${ip_dyn} = yes; then
+		setenv nfsip dhcp;
+		setenv get_cmd dhcp;
+	else
+		setenv nfsip ${ipaddr}:${serverip}::${netmask}::eth0:on;
+		setenv get_cmd tftp;
+	fi;
+	if run net_load_bootenv; then
+		env import -t ${bootenv_addr} ${filesize};
+	fi;
+	run netargs;
+	${get_cmd} ${loadaddr} ${image};
+	if ${get_cmd} ${fdt_addr} ${fdt_file}; then
+		run net_apply_overlays;
+		booti ${loadaddr} - ${fdt_addr};
+	else
+		echo WARN: Cannot load the DT;
+	fi;
+bsp_bootcmd=echo Running BSP bootcmd ...;
+        mmc dev ${mmcdev}; if mmc rescan; then
+          if run loadbootscript; then
+          run bootscript;
+          else
+          if test ${sec_boot} = yes; then
+                   if run loadcntr; then
+                          run mmcboot;
+                   else run netboot;

board/phytec/imx93_phycore/imx93_phycore.env line 96

Quoted 10 lines
board/phytec/imx93_phycore/imx93_phycore.env new file +9 -0
+                   fi;
+            else
+                   if run loadimage; then
+                           run mmcboot;
+                   else run netboot;
+                   fi;
+                fi;
+          fi;
+         fi;
\ No newline at end of file

New line...

Quoted 1,608 lines
board/phytec/imx93_phycore/lpddr4_timing_1GB.c new file +1546 -0
new file mode 100644
index 00000000000..2111972a40e
@@ -0,0 +1,1546 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2023 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ *
+ * Code generated with DDR Tool v1.0.0.
+ */
+
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+
+static struct dram_cfg_param ddr_ddrc_cfg[] = {
+	/** Initialize DDRC registers **/
+	{0x4e300110, 0x44100001},
+	{0x4e300000, 0x8000bf},
+	{0x4e300008, 0x0},
+	{0x4e300080, 0x80000412},
+	{0x4e300084, 0x0},
+	{0x4e300114, 0x1002},
+	{0x4e300260, 0x4080},
+	{0x4e300f04, 0x80},
+	{0x4e300800, 0x43b30002},
+	{0x4e300804, 0x1f1f1f1f},
+	{0x4e301000, 0x0},
+	{0x4e301240, 0x0},
+	{0x4e301244, 0x0},
+	{0x4e301248, 0x0},
+	{0x4e30124c, 0x0},
+	{0x4e301250, 0x0},
+	{0x4e301254, 0x0},
+	{0x4e301258, 0x0},
+	{0x4e30125c, 0x0},
+
+};
+
+/* dram fsp cfg */
+static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
+	{
+		{
+			{0x4e300100, 0x24A0421B},
+			{0x4e300104, 0xF8EE001B},
+			{0x4e300108, 0x2F263233},
+			{0x4e30010C, 0x0005E18B},
+			{0x4e300124, 0x1C770000},
+			{0x4e300160, 0x00009102},
+			{0x4e30016C, 0x35F00000},
+			{0x4e300170, 0x8B0B0608},
+			{0x4e300250, 0x00000028},
+			{0x4e300254, 0x00FE00FE},
+			{0x4e300258, 0x00000008},
+			{0x4e30025C, 0x00000400},
+			{0x4e300300, 0x224F2215},
+			{0x4e300304, 0x00FE2213},
+			{0x4e300308, 0x0A3C0E3C},
+		},
+		{
+			{0x01, 0xE4},
+			{0x02, 0x36},
+			{0x03, 0xF2},
+			{0x0b, 0x46},
+			{0x0c, 0x11},
+			{0x0e, 0x11},
+			{0x16, 0x04},
+		},
+		0,
+	},
+
+};
+
+/* PHY Initialize Configuration */
+static struct dram_cfg_param ddr_ddrphy_cfg[] = {
+	{0x100a0, 0x0},
+	{0x100a1, 0x1},
+	{0x100a2, 0x2},
+	{0x100a3, 0x3},
+	{0x100a4, 0x4},
+	{0x100a5, 0x5},
+	{0x100a6, 0x6},
+	{0x100a7, 0x7},
+	{0x110a0, 0x0},
+	{0x110a1, 0x1},
+	{0x110a2, 0x2},
+	{0x110a3, 0x3},
+	{0x110a4, 0x4},
+	{0x110a5, 0x5},
+	{0x110a6, 0x6},
+	{0x110a7, 0x7},
+	{0x1005f, 0x5ff},
+	{0x1015f, 0x5ff},
+	{0x1105f, 0x5ff},
+	{0x1115f, 0x5ff},
+	{0x55, 0x1ff},
+	{0x1055, 0x1ff},
+	{0x2055, 0x1ff},
+	{0x200c5, 0x19},
+	{0x2002e, 0x2},
+	{0x90204, 0x0},
+	{0x20024, 0x1e3},
+	{0x2003a, 0x2},
+	{0x2007d, 0x212},
+	{0x2007c, 0x61},
+	{0x20056, 0x3},
+	{0x1004d, 0x600},
+	{0x1014d, 0x600},
+	{0x1104d, 0x600},
+	{0x1114d, 0x600},
+	{0x10049, 0xe00},
+	{0x10149, 0xe00},
+	{0x11049, 0xe00},
+	{0x11149, 0xe00},
+	{0x43, 0x60},
+	{0x1043, 0x60},
+	{0x2043, 0x60},
+	{0x20018, 0x1},
+	{0x20075, 0x4},
+	{0x20050, 0x0},
+	{0x2009b, 0x2},
+	{0x20008, 0x3a5},
+	{0x20088, 0x9},
+	{0x200b2, 0x10c},
+	{0x10043, 0x5a1},
+	{0x10143, 0x5a1},
+	{0x11043, 0x5a1},
+	{0x11143, 0x5a1},
+	{0x200fa, 0x2},
+	{0x20019, 0x1},
+	{0x200f0, 0x600},
+	{0x200f1, 0x0},
+	{0x200f2, 0x4444},
+	{0x200f3, 0x8888},
+	{0x200f4, 0x5655},
+	{0x200f5, 0x0},
+	{0x200f6, 0x0},
+	{0x200f7, 0xf000},
+	{0x20025, 0x0},
+	{0x2002d, 0x1},
+	{0x2002c, 0x0},
+	{0x20021, 0x0},
+	{0x200c7, 0x21},
+	{0x1200c7, 0x21},
+	{0x200ca, 0x24},
+	{0x1200ca, 0x24},
+
+};
+
+/* ddr phy trained csr */
+static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
+	{0x1005f, 0x0},
+	{0x1015f, 0x0},
+	{0x1105f, 0x0},
+	{0x1115f, 0x0},
+	{0x55, 0x0},
+	{0x1055, 0x0},
+	{0x2055, 0x0},
+	{0x200c5, 0x0},
+	{0x2002e, 0x0},
+	{0x90204, 0x0},
+	{0x20024, 0x0},
+	{0x2003a, 0x0},
+	{0x2007d, 0x0},
+	{0x2007c, 0x0},
+	{0x20056, 0x0},
+	{0x1004d, 0x0},
+	{0x1014d, 0x0},
+	{0x1104d, 0x0},
+	{0x1114d, 0x0},
+	{0x10049, 0x0},
+	{0x10149, 0x0},
+	{0x11049, 0x0},
+	{0x11149, 0x0},
+	{0x43, 0x0},
+	{0x1043, 0x0},
+	{0x2043, 0x0},
+	{0x20018, 0x0},
+	{0x20075, 0x0},
+	{0x20050, 0x0},
+	{0x2009b, 0x0},
+	{0x20008, 0x0},
+	{0x20088, 0x0},
+	{0x200b2, 0x0},
+	{0x10043, 0x0},
+	{0x10143, 0x0},
+	{0x11043, 0x0},
+	{0x11143, 0x0},
+	{0x200fa, 0x0},
+	{0x20019, 0x0},
+	{0x200f0, 0x0},
+	{0x200f1, 0x0},
+	{0x200f2, 0x0},
+	{0x200f3, 0x0},
+	{0x200f4, 0x0},
+	{0x200f5, 0x0},
+	{0x200f6, 0x0},
+	{0x200f7, 0x0},
+	{0x20025, 0x0},
+	{0x2002d, 0x0},
+	{0x2002c, 0x0},
+	{0xd0000, 0x0},
+	{0x90000, 0x0},
+	{0x90001, 0x0},
+	{0x90002, 0x0},
+	{0x90003, 0x0},
+	{0x90004, 0x0},
+	{0x90005, 0x0},
+	{0x90029, 0x0},
+	{0x9002a, 0x0},
+	{0x9002b, 0x0},
+	{0x9002c, 0x0},
+	{0x9002d, 0x0},
+	{0x9002e, 0x0},
+	{0x9002f, 0x0},
+	{0x90030, 0x0},
+	{0x90031, 0x0},
+	{0x90032, 0x0},
+	{0x90033, 0x0},
+	{0x90034, 0x0},
+	{0x90035, 0x0},
+	{0x90036, 0x0},
+	{0x90037, 0x0},
+	{0x90038, 0x0},
+	{0x90039, 0x0},
+	{0x9003a, 0x0},
+	{0x9003b, 0x0},
+	{0x9003c, 0x0},
+	{0x9003d, 0x0},
+	{0x9003e, 0x0},
+	{0x9003f, 0x0},
+	{0x90040, 0x0},
+	{0x90041, 0x0},
+	{0x90042, 0x0},
+	{0x90043, 0x0},
+	{0x90044, 0x0},
+	{0x90045, 0x0},
+	{0x90046, 0x0},
+	{0x90047, 0x0},
+	{0x90048, 0x0},
+	{0x90049, 0x0},
+	{0x9004a, 0x0},
+	{0x9004b, 0x0},
+	{0x9004c, 0x0},
+	{0x9004d, 0x0},
+	{0x9004e, 0x0},
+	{0x9004f, 0x0},
+	{0x90050, 0x0},
+	{0x90051, 0x0},
+	{0x90052, 0x0},
+	{0x90053, 0x0},
+	{0x90054, 0x0},
+	{0x90055, 0x0},
+	{0x90056, 0x0},
+	{0x90057, 0x0},
+	{0x90058, 0x0},
+	{0x90059, 0x0},
+	{0x9005a, 0x0},
+	{0x9005b, 0x0},
+	{0x9005c, 0x0},
+	{0x9005d, 0x0},
+	{0x9005e, 0x0},
+	{0x9005f, 0x0},
+	{0x90060, 0x0},
+	{0x90061, 0x0},
+	{0x90062, 0x0},
+	{0x90063, 0x0},
+	{0x90064, 0x0},
+	{0x90065, 0x0},
+	{0x90066, 0x0},
+	{0x90067, 0x0},
+	{0x90068, 0x0},
+	{0x90069, 0x0},
+	{0x9006a, 0x0},
+	{0x9006b, 0x0},
+	{0x9006c, 0x0},
+	{0x9006d, 0x0},
+	{0x9006e, 0x0},
+	{0x9006f, 0x0},
+	{0x90070, 0x0},
+	{0x90071, 0x0},
+	{0x90072, 0x0},
+	{0x90073, 0x0},
+	{0x90074, 0x0},
+	{0x90075, 0x0},
+	{0x90076, 0x0},
+	{0x90077, 0x0},
+	{0x90078, 0x0},
+	{0x90079, 0x0},
+	{0x9007a, 0x0},
+	{0x9007b, 0x0},
+	{0x9007c, 0x0},
+	{0x9007d, 0x0},
+	{0x9007e, 0x0},
+	{0x9007f, 0x0},
+	{0x90080, 0x0},
+	{0x90081, 0x0},
+	{0x90082, 0x0},
+	{0x90083, 0x0},
+	{0x90084, 0x0},
+	{0x90085, 0x0},
+	{0x90086, 0x0},
+	{0x90087, 0x0},
+	{0x90088, 0x0},
+	{0x90089, 0x0},
+	{0x9008a, 0x0},
+	{0x9008b, 0x0},
+	{0x9008c, 0x0},
+	{0x9008d, 0x0},
+	{0x9008e, 0x0},
+	{0x9008f, 0x0},
+	{0x90090, 0x0},
+	{0x90091, 0x0},
+	{0x90092, 0x0},
+	{0x90093, 0x0},
+	{0x90094, 0x0},
+	{0x90095, 0x0},
+	{0x90096, 0x0},
+	{0x90097, 0x0},
+	{0x90098, 0x0},
+	{0x90099, 0x0},
+	{0x9009a, 0x0},
+	{0x9009b, 0x0},
+	{0x9009c, 0x0},
+	{0x9009d, 0x0},
+	{0x9009e, 0x0},
+	{0x9009f, 0x0},
+	{0x900a0, 0x0},
+	{0x900a1, 0x0},
+	{0x900a2, 0x0},
+	{0x900a3, 0x0},
+	{0x900a4, 0x0},
+	{0x900a5, 0x0},
+	{0x900a6, 0x0},
+	{0x900a7, 0x0},
+	{0x900a8, 0x0},
+	{0x900a9, 0x0},
+	{0x40000, 0x0},
+	{0x40020, 0x0},
+	{0x40040, 0x0},
+	{0x40060, 0x0},
+	{0x40001, 0x0},
+	{0x40021, 0x0},
+	{0x40041, 0x0},
+	{0x40061, 0x0},
+	{0x40002, 0x0},
+	{0x40022, 0x0},
+	{0x40042, 0x0},
+	{0x40062, 0x0},
+	{0x40003, 0x0},
+	{0x40023, 0x0},
+	{0x40043, 0x0},
+	{0x40063, 0x0},
+	{0x40004, 0x0},
+	{0x40024, 0x0},
+	{0x40044, 0x0},
+	{0x40064, 0x0},
+	{0x40005, 0x0},
+	{0x40025, 0x0},
+	{0x40045, 0x0},
+	{0x40065, 0x0},
+	{0x40006, 0x0},
+	{0x40026, 0x0},
+	{0x40046, 0x0},
+	{0x40066, 0x0},
+	{0x40007, 0x0},
+	{0x40027, 0x0},
+	{0x40047, 0x0},
+	{0x40067, 0x0},
+	{0x40008, 0x0},
+	{0x40028, 0x0},
+	{0x40048, 0x0},
+	{0x40068, 0x0},
+	{0x40009, 0x0},
+	{0x40029, 0x0},
+	{0x40049, 0x0},
+	{0x40069, 0x0},
+	{0x4000a, 0x0},
+	{0x4002a, 0x0},
+	{0x4004a, 0x0},
+	{0x4006a, 0x0},
+	{0x4000b, 0x0},
+	{0x4002b, 0x0},
+	{0x4004b, 0x0},
+	{0x4006b, 0x0},
+	{0x4000c, 0x0},
+	{0x4002c, 0x0},
+	{0x4004c, 0x0},
+	{0x4006c, 0x0},
+	{0x4000d, 0x0},
+	{0x4002d, 0x0},
+	{0x4004d, 0x0},
+	{0x4006d, 0x0},
+	{0x4000e, 0x0},
+	{0x4002e, 0x0},
+	{0x4004e, 0x0},
+	{0x4006e, 0x0},
+	{0x4000f, 0x0},
+	{0x4002f, 0x0},
+	{0x4004f, 0x0},
+	{0x4006f, 0x0},
+	{0x40010, 0x0},
+	{0x40030, 0x0},
+	{0x40050, 0x0},
+	{0x40070, 0x0},
+	{0x40011, 0x0},
+	{0x40031, 0x0},
+	{0x40051, 0x0},
+	{0x40071, 0x0},
+	{0x40012, 0x0},
+	{0x40032, 0x0},
+	{0x40052, 0x0},
+	{0x40072, 0x0},
+	{0x40013, 0x0},
+	{0x40033, 0x0},
+	{0x40053, 0x0},
+	{0x40073, 0x0},
+	{0x40014, 0x0},
+	{0x40034, 0x0},
+	{0x40054, 0x0},
+	{0x40074, 0x0},
+	{0x40015, 0x0},
+	{0x40035, 0x0},
+	{0x40055, 0x0},
+	{0x40075, 0x0},
+	{0x40016, 0x0},
+	{0x40036, 0x0},
+	{0x40056, 0x0},
+	{0x40076, 0x0},
+	{0x40017, 0x0},
+	{0x40037, 0x0},
+	{0x40057, 0x0},
+	{0x40077, 0x0},
+	{0x40018, 0x0},
+	{0x40038, 0x0},
+	{0x40058, 0x0},
+	{0x40078, 0x0},
+	{0x40019, 0x0},
+	{0x40039, 0x0},
+	{0x40059, 0x0},
+	{0x40079, 0x0},
+	{0x4001a, 0x0},
+	{0x4003a, 0x0},
+	{0x4005a, 0x0},
+	{0x4007a, 0x0},
+	{0x900aa, 0x0},
+	{0x900ab, 0x0},
+	{0x900ac, 0x0},
+	{0x900ad, 0x0},
+	{0x900ae, 0x0},
+	{0x900af, 0x0},
+	{0x900b0, 0x0},
+	{0x900b1, 0x0},
+	{0x900b2, 0x0},
+	{0x900b3, 0x0},
+	{0x900b4, 0x0},
+	{0x900b5, 0x0},
+	{0x900b6, 0x0},
+	{0x900b7, 0x0},
+	{0x900b8, 0x0},
+	{0x900b9, 0x0},
+	{0x900ba, 0x0},
+	{0x900bb, 0x0},
+	{0x900bc, 0x0},
+	{0x900bd, 0x0},
+	{0x900be, 0x0},
+	{0x900bf, 0x0},
+	{0x900c0, 0x0},
+	{0x900c1, 0x0},
+	{0x900c2, 0x0},
+	{0x900c3, 0x0},
+	{0x900c4, 0x0},
+	{0x900c5, 0x0},
+	{0x900c6, 0x0},
+	{0x900c7, 0x0},
+	{0x900c8, 0x0},
+	{0x900c9, 0x0},
+	{0x900ca, 0x0},
+	{0x900cb, 0x0},
+	{0x900cc, 0x0},
+	{0x900cd, 0x0},
+	{0x900ce, 0x0},
+	{0x900cf, 0x0},
+	{0x900d0, 0x0},
+	{0x900d1, 0x0},
+	{0x900d2, 0x0},
+	{0x900d3, 0x0},
+	{0x900d4, 0x0},
+	{0x900d5, 0x0},
+	{0x900d6, 0x0},
+	{0x900d7, 0x0},
+	{0x900d8, 0x0},
+	{0x900d9, 0x0},
+	{0x900da, 0x0},
+	{0x900db, 0x0},
+	{0x900dc, 0x0},
+	{0x900dd, 0x0},
+	{0x900de, 0x0},
+	{0x900df, 0x0},
+	{0x900e0, 0x0},
+	{0x900e1, 0x0},
+	{0x900e2, 0x0},
+	{0x900e3, 0x0},
+	{0x900e4, 0x0},
+	{0x900e5, 0x0},
+	{0x900e6, 0x0},
+	{0x900e7, 0x0},
+	{0x900e8, 0x0},
+	{0x900e9, 0x0},
+	{0x900ea, 0x0},
+	{0x900eb, 0x0},
+	{0x900ec, 0x0},
+	{0x900ed, 0x0},
+	{0x900ee, 0x0},
+	{0x900ef, 0x0},
+	{0x900f0, 0x0},
+	{0x900f1, 0x0},
+	{0x900f2, 0x0},
+	{0x900f3, 0x0},
+	{0x900f4, 0x0},
+	{0x900f5, 0x0},
+	{0x900f6, 0x0},
+	{0x900f7, 0x0},
+	{0x900f8, 0x0},
+	{0x900f9, 0x0},
+	{0x900fa, 0x0},
+	{0x900fb, 0x0},
+	{0x900fc, 0x0},
+	{0x900fd, 0x0},
+	{0x900fe, 0x0},
+	{0x900ff, 0x0},
+	{0x90100, 0x0},
+	{0x90101, 0x0},
+	{0x90102, 0x0},
+	{0x90103, 0x0},
+	{0x90104, 0x0},
+	{0x90105, 0x0},
+	{0x90106, 0x0},
+	{0x90107, 0x0},
+	{0x90108, 0x0},
+	{0x90109, 0x0},
+	{0x9010a, 0x0},
+	{0x9010b, 0x0},
+	{0x9010c, 0x0},
+	{0x9010d, 0x0},
+	{0x9010e, 0x0},
+	{0x9010f, 0x0},
+	{0x90110, 0x0},
+	{0x90111, 0x0},
+	{0x90112, 0x0},
+	{0x90113, 0x0},
+	{0x90114, 0x0},
+	{0x90115, 0x0},
+	{0x90116, 0x0},
+	{0x90117, 0x0},
+	{0x90118, 0x0},
+	{0x90119, 0x0},
+	{0x9011a, 0x0},
+	{0x9011b, 0x0},
+	{0x9011c, 0x0},
+	{0x9011d, 0x0},
+	{0x9011e, 0x0},
+	{0x9011f, 0x0},
+	{0x90120, 0x0},
+	{0x90121, 0x0},
+	{0x90122, 0x0},
+	{0x90123, 0x0},
+	{0x90124, 0x0},
+	{0x90125, 0x0},
+	{0x90126, 0x0},
+	{0x90127, 0x0},
+	{0x90128, 0x0},
+	{0x90129, 0x0},
+	{0x9012a, 0x0},
+	{0x9012b, 0x0},
+	{0x9012c, 0x0},
+	{0x9012d, 0x0},
+	{0x9012e, 0x0},
+	{0x9012f, 0x0},
+	{0x90130, 0x0},
+	{0x90131, 0x0},
+	{0x90132, 0x0},
+	{0x90133, 0x0},
+	{0x90134, 0x0},
+	{0x90135, 0x0},
+	{0x90136, 0x0},
+	{0x90137, 0x0},
+	{0x90138, 0x0},
+	{0x90139, 0x0},
+	{0x9013a, 0x0},
+	{0x9013b, 0x0},
+	{0x9013c, 0x0},
+	{0x9013d, 0x0},
+	{0x9013e, 0x0},
+	{0x9013f, 0x0},
+	{0x90140, 0x0},
+	{0x90141, 0x0},
+	{0x90142, 0x0},
+	{0x90143, 0x0},
+	{0x90144, 0x0},
+	{0x90145, 0x0},
+	{0x90146, 0x0},
+	{0x90147, 0x0},
+	{0x90148, 0x0},
+	{0x90149, 0x0},
+	{0x9014a, 0x0},
+	{0x9014b, 0x0},
+	{0x9014c, 0x0},
+	{0x9014d, 0x0},
+	{0x9014e, 0x0},
+	{0x9014f, 0x0},
+	{0x90150, 0x0},
+	{0x90151, 0x0},
+	{0x90152, 0x0},
+	{0x90153, 0x0},
+	{0x90154, 0x0},
+	{0x90155, 0x0},
+	{0x90156, 0x0},
+	{0x90157, 0x0},
+	{0x90158, 0x0},
+	{0x90159, 0x0},
+	{0x9015a, 0x0},
+	{0x9015b, 0x0},
+	{0x9015c, 0x0},
+	{0x9015d, 0x0},
+	{0x9015e, 0x0},
+	{0x9015f, 0x0},
+	{0x90160, 0x0},
+	{0x90161, 0x0},
+	{0x90162, 0x0},
+	{0x90163, 0x0},
+	{0x90164, 0x0},
+	{0x90165, 0x0},
+	{0x90166, 0x0},
+	{0x90167, 0x0},
+	{0x90168, 0x0},
+	{0x90169, 0x0},
+	{0x9016a, 0x0},
+	{0x9016b, 0x0},
+	{0x9016c, 0x0},
+	{0x9016d, 0x0},
+	{0x9016e, 0x0},
+	{0x9016f, 0x0},
+	{0x90170, 0x0},
+	{0x90171, 0x0},
+	{0x90172, 0x0},
+	{0x90173, 0x0},
+	{0x90174, 0x0},
+	{0x90175, 0x0},
+	{0x90176, 0x0},
+	{0x90177, 0x0},
+	{0x90178, 0x0},
+	{0x90179, 0x0},
+	{0x9017a, 0x0},
+	{0x9017b, 0x0},
+	{0x9017c, 0x0},
+	{0x9017d, 0x0},
+	{0x9017e, 0x0},
+	{0x9017f, 0x0},
+	{0x90180, 0x0},
+	{0x90181, 0x0},
+	{0x90182, 0x0},
+	{0x90183, 0x0},
+	{0x90184, 0x0},
+	{0x90006, 0x0},
+	{0x90007, 0x0},
+	{0x90008, 0x0},
+	{0x90009, 0x0},
+	{0x9000a, 0x0},
+	{0x9000b, 0x0},
+	{0xd00e7, 0x0},
+	{0x90017, 0x0},
+	{0x9001f, 0x0},
+	{0x90026, 0x0},
+	{0x400d0, 0x0},
+	{0x400d1, 0x0},
+	{0x400d2, 0x0},
+	{0x400d3, 0x0},
+	{0x400d4, 0x0},
+	{0x400d5, 0x0},
+	{0x400d6, 0x0},
+	{0x400d7, 0x0},
+	{0x200be, 0x0},
+	{0x2000b, 0x0},
+	{0x2000c, 0x0},
+	{0x2000d, 0x0},
+	{0x2000e, 0x0},
+	{0x9000c, 0x0},
+	{0x9000d, 0x0},
+	{0x9000e, 0x0},
+	{0x9000f, 0x0},
+	{0x90010, 0x0},
+	{0x90011, 0x0},
+	{0x90012, 0x0},
+	{0x90013, 0x0},
+	{0x20010, 0x0},
+	{0x20011, 0x0},
+	{0x40080, 0x0},
+	{0x40081, 0x0},
+	{0x40082, 0x0},
+	{0x40083, 0x0},
+	{0x40084, 0x0},
+	{0x40085, 0x0},
+	{0x400fd, 0x0},
+	{0x400f1, 0x0},
+	{0x10011, 0x0},
+	{0x10012, 0x0},
+	{0x10013, 0x0},
+	{0x10018, 0x0},
+	{0x10002, 0x0},
+	{0x100b2, 0x0},
+	{0x101b4, 0x0},
+	{0x102b4, 0x0},
+	{0x103b4, 0x0},
+	{0x104b4, 0x0},
+	{0x105b4, 0x0},
+	{0x106b4, 0x0},
+	{0x107b4, 0x0},
+	{0x108b4, 0x0},
+	{0x11011, 0x0},
+	{0x11012, 0x0},
+	{0x11013, 0x0},
+	{0x11018, 0x0},
+	{0x11002, 0x0},
+	{0x110b2, 0x0},
+	{0x111b4, 0x0},
+	{0x112b4, 0x0},
+	{0x113b4, 0x0},
+	{0x114b4, 0x0},
+	{0x115b4, 0x0},
+	{0x116b4, 0x0},
+	{0x117b4, 0x0},
+	{0x118b4, 0x0},
+	{0x20089, 0x0},
+	{0xc0080, 0x0},
+	{0x200cb, 0x0},
+	{0x10068, 0x0},
+	{0x10069, 0x0},
+	{0x10168, 0x0},
+	{0x10169, 0x0},
+	{0x10268, 0x0},
+	{0x10269, 0x0},
+	{0x10368, 0x0},
+	{0x10369, 0x0},
+	{0x10468, 0x0},
+	{0x10469, 0x0},
+	{0x10568, 0x0},
+	{0x10569, 0x0},
+	{0x10668, 0x0},
+	{0x10669, 0x0},
+	{0x10768, 0x0},
+	{0x10769, 0x0},
+	{0x10868, 0x0},
+	{0x10869, 0x0},
+	{0x100aa, 0x0},
+	{0x10062, 0x0},
+	{0x10001, 0x0},
+	{0x100a0, 0x0},
+	{0x100a1, 0x0},
+	{0x100a2, 0x0},
+	{0x100a3, 0x0},
+	{0x100a4, 0x0},
+	{0x100a5, 0x0},
+	{0x100a6, 0x0},
+	{0x100a7, 0x0},
+	{0x11068, 0x0},
+	{0x11069, 0x0},
+	{0x11168, 0x0},
+	{0x11169, 0x0},
+	{0x11268, 0x0},
+	{0x11269, 0x0},
+	{0x11368, 0x0},
+	{0x11369, 0x0},
+	{0x11468, 0x0},
+	{0x11469, 0x0},
+	{0x11568, 0x0},
+	{0x11569, 0x0},
+	{0x11668, 0x0},
+	{0x11669, 0x0},
+	{0x11768, 0x0},
+	{0x11769, 0x0},
+	{0x11868, 0x0},
+	{0x11869, 0x0},
+	{0x110aa, 0x0},
+	{0x11062, 0x0},
+	{0x11001, 0x0},
+	{0x110a0, 0x0},
+	{0x110a1, 0x0},
+	{0x110a2, 0x0},
+	{0x110a3, 0x0},
+	{0x110a4, 0x0},
+	{0x110a5, 0x0},
+	{0x110a6, 0x0},
+	{0x110a7, 0x0},
+	{0x80, 0x0},
+	{0x1080, 0x0},
+	{0x2080, 0x0},
+	{0x10020, 0x0},
+	{0x10080, 0x0},
+	{0x10081, 0x0},
+	{0x100d0, 0x0},
+	{0x100d1, 0x0},
+	{0x1008c, 0x0},
+	{0x1008d, 0x0},
+	{0x10180, 0x0},
+	{0x10181, 0x0},
+	{0x101d0, 0x0},
+	{0x101d1, 0x0},
+	{0x1018c, 0x0},
+	{0x1018d, 0x0},
+	{0x100c0, 0x0},
+	{0x100c1, 0x0},
+	{0x101c0, 0x0},
+	{0x101c1, 0x0},
+	{0x102c0, 0x0},
+	{0x102c1, 0x0},
+	{0x103c0, 0x0},
+	{0x103c1, 0x0},
+	{0x104c0, 0x0},
+	{0x104c1, 0x0},
+	{0x105c0, 0x0},
+	{0x105c1, 0x0},
+	{0x106c0, 0x0},
+	{0x106c1, 0x0},
+	{0x107c0, 0x0},
+	{0x107c1, 0x0},
+	{0x108c0, 0x0},
+	{0x108c1, 0x0},
+	{0x100ae, 0x0},
+	{0x100af, 0x0},
+	{0x11020, 0x0},
+	{0x11080, 0x0},
+	{0x11081, 0x0},
+	{0x110d0, 0x0},
+	{0x110d1, 0x0},
+	{0x1108c, 0x0},
+	{0x1108d, 0x0},
+	{0x11180, 0x0},
+	{0x11181, 0x0},
+	{0x111d0, 0x0},
+	{0x111d1, 0x0},
+	{0x1118c, 0x0},
+	{0x1118d, 0x0},
+	{0x110c0, 0x0},
+	{0x110c1, 0x0},
+	{0x111c0, 0x0},
+	{0x111c1, 0x0},
+	{0x112c0, 0x0},
+	{0x112c1, 0x0},
+	{0x113c0, 0x0},
+	{0x113c1, 0x0},
+	{0x114c0, 0x0},
+	{0x114c1, 0x0},
+	{0x115c0, 0x0},
+	{0x115c1, 0x0},
+	{0x116c0, 0x0},
+	{0x116c1, 0x0},
+	{0x117c0, 0x0},
+	{0x117c1, 0x0},
+	{0x118c0, 0x0},
+	{0x118c1, 0x0},
+	{0x110ae, 0x0},
+	{0x110af, 0x0},
+	{0x90201, 0x0},
+	{0x90202, 0x0},
+	{0x90203, 0x0},
+	{0x90205, 0x0},
+	{0x90206, 0x0},
+	{0x90207, 0x0},
+	{0x90208, 0x0},
+	{0x20020, 0x0},
+	{0x20077, 0x0},
+	{0x20072, 0x0},
+	{0x20073, 0x0},
+	{0x400c0, 0x0},
+	{0x10040, 0x0},
+	{0x10140, 0x0},
+	{0x10240, 0x0},
+	{0x10340, 0x0},
+	{0x10440, 0x0},
+	{0x10540, 0x0},
+	{0x10640, 0x0},
+	{0x10740, 0x0},
+	{0x10840, 0x0},
+	{0x11040, 0x0},
+	{0x11140, 0x0},
+	{0x11240, 0x0},
+	{0x11340, 0x0},
+	{0x11440, 0x0},
+	{0x11540, 0x0},
+	{0x11640, 0x0},
+	{0x11740, 0x0},
+	{0x11840, 0x0},
+
+};
+
+/* P0 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_cfg[] = {
+	{0xd0000, 0x0},
+	{0x54003, 0xe94},
+	{0x54004, 0x4},
+	{0x54006, 0x15},
+	{0x54008, 0x131f},
+	{0x54009, 0xc8},
+	{0x5400b, 0x4},
+	{0x5400d, 0x100},
+	{0x5400f, 0x100},
+	{0x54012, 0x110},
+	{0x54019, 0x36e4},
+	{0x5401a, 0xf2},
+	{0x5401b, 0x1146},
+	{0x5401c, 0x1108},
+	{0x5401e, 0x4},
+	{0x5401f, 0x36e4},
+	{0x54020, 0xf2},
+	{0x54021, 0x1146},
+	{0x54022, 0x1108},
+	{0x54024, 0x4},
+	{0x54032, 0xe400},
+	{0x54033, 0xf236},
+	{0x54034, 0x4600},
+	{0x54035, 0x811},
+	{0x54036, 0x11},
+	{0x54037, 0x400},
+	{0x54038, 0xe400},
+	{0x54039, 0xf236},
+	{0x5403a, 0x4600},
+	{0x5403b, 0x811},
+	{0x5403c, 0x11},
+	{0x5403d, 0x400},
+	{0xd0000, 0x1}
+};
+
+/* P0 2D message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
+	{0xd0000, 0x0},
+	{0x54003, 0xe94},
+	{0x54004, 0x4},
+	{0x54006, 0x15},
+	{0x54008, 0x61},
+	{0x54009, 0xc8},
+	{0x5400b, 0x4},
+	{0x5400d, 0x100},
+	{0x5400f, 0x100},
+	{0x54010, 0x2080},
+	{0x54012, 0x110},
+	{0x54019, 0x36e4},
+	{0x5401a, 0xf2},
+	{0x5401b, 0x1146},
+	{0x5401c, 0x1108},
+	{0x5401e, 0x4},
+	{0x5401f, 0x36e4},
+	{0x54020, 0xf2},
+	{0x54021, 0x1146},
+	{0x54022, 0x1108},
+	{0x54024, 0x4},
+	{0x54032, 0xe400},
+	{0x54033, 0xf236},
+	{0x54034, 0x4600},
+	{0x54035, 0x811},
+	{0x54036, 0x11},
+	{0x54037, 0x400},
+	{0x54038, 0xe400},
+	{0x54039, 0xf236},
+	{0x5403a, 0x4600},
+	{0x5403b, 0x811},
+	{0x5403c, 0x11},
+	{0x5403d, 0x400},
+	{0xd0000, 0x1}
+};
+
+/* DRAM PHY init engine image */
+static struct dram_cfg_param ddr_phy_pie[] = {
+	{0xd0000, 0x0},
+	{0x90000, 0x10},
+	{0x90001, 0x400},
+	{0x90002, 0x10e},
+	{0x90003, 0x0},
+	{0x90004, 0x0},
+	{0x90005, 0x8},
+	{0x90029, 0xb},
+	{0x9002a, 0x480},
+	{0x9002b, 0x109},
+	{0x9002c, 0x8},
+	{0x9002d, 0x448},
+	{0x9002e, 0x139},
+	{0x9002f, 0x8},
+	{0x90030, 0x478},
+	{0x90031, 0x109},
+	{0x90032, 0x0},
+	{0x90033, 0xe8},
+	{0x90034, 0x109},
+	{0x90035, 0x2},
+	{0x90036, 0x10},
+	{0x90037, 0x139},
+	{0x90038, 0xb},
+	{0x90039, 0x7c0},
+	{0x9003a, 0x139},
+	{0x9003b, 0x44},
+	{0x9003c, 0x633},
+	{0x9003d, 0x159},
+	{0x9003e, 0x14f},
+	{0x9003f, 0x630},
+	{0x90040, 0x159},
+	{0x90041, 0x47},
+	{0x90042, 0x633},
+	{0x90043, 0x149},
+	{0x90044, 0x4f},
+	{0x90045, 0x633},
+	{0x90046, 0x179},
+	{0x90047, 0x8},
+	{0x90048, 0xe0},
+	{0x90049, 0x109},
+	{0x9004a, 0x0},
+	{0x9004b, 0x7c8},
+	{0x9004c, 0x109},
+	{0x9004d, 0x0},
+	{0x9004e, 0x1},
+	{0x9004f, 0x8},
+	{0x90050, 0x30},
+	{0x90051, 0x65a},
+	{0x90052, 0x9},
+	{0x90053, 0x0},
+	{0x90054, 0x45a},
+	{0x90055, 0x9},
+	{0x90056, 0x0},
+	{0x90057, 0x448},
+	{0x90058, 0x109},
+	{0x90059, 0x40},
+	{0x9005a, 0x633},
+	{0x9005b, 0x179},
+	{0x9005c, 0x1},
+	{0x9005d, 0x618},
+	{0x9005e, 0x109},
+	{0x9005f, 0x40c0},
+	{0x90060, 0x633},
+	{0x90061, 0x149},
+	{0x90062, 0x8},
+	{0x90063, 0x4},
+	{0x90064, 0x48},
+	{0x90065, 0x4040},
+	{0x90066, 0x633},
+	{0x90067, 0x149},
+	{0x90068, 0x0},
+	{0x90069, 0x4},
+	{0x9006a, 0x48},
+	{0x9006b, 0x40},
+	{0x9006c, 0x633},
+	{0x9006d, 0x149},
+	{0x9006e, 0x0},
+	{0x9006f, 0x658},
+	{0x90070, 0x109},
+	{0x90071, 0x10},
+	{0x90072, 0x4},
+	{0x90073, 0x18},
+	{0x90074, 0x0},
+	{0x90075, 0x4},
+	{0x90076, 0x78},
+	{0x90077, 0x549},
+	{0x90078, 0x633},
+	{0x90079, 0x159},
+	{0x9007a, 0xd49},
+	{0x9007b, 0x633},
+	{0x9007c, 0x159},
+	{0x9007d, 0x94a},
+	{0x9007e, 0x633},
+	{0x9007f, 0x159},
+	{0x90080, 0x441},
+	{0x90081, 0x633},
+	{0x90082, 0x149},
+	{0x90083, 0x42},
+	{0x90084, 0x633},
+	{0x90085, 0x149},
+	{0x90086, 0x1},
+	{0x90087, 0x633},
+	{0x90088, 0x149},
+	{0x90089, 0x0},
+	{0x9008a, 0xe0},
+	{0x9008b, 0x109},
+	{0x9008c, 0xa},
+	{0x9008d, 0x10},
+	{0x9008e, 0x109},
+	{0x9008f, 0x9},
+	{0x90090, 0x3c0},
+	{0x90091, 0x149},
+	{0x90092, 0x9},
+	{0x90093, 0x3c0},
+	{0x90094, 0x159},
+	{0x90095, 0x18},
+	{0x90096, 0x10},
+	{0x90097, 0x109},
+	{0x90098, 0x0},
+	{0x90099, 0x3c0},
+	{0x9009a, 0x109},
+	{0x9009b, 0x18},
+	{0x9009c, 0x4},
+	{0x9009d, 0x48},
+	{0x9009e, 0x18},
+	{0x9009f, 0x4},
+	{0x900a0, 0x58},
+	{0x900a1, 0xb},
+	{0x900a2, 0x10},
+	{0x900a3, 0x109},
+	{0x900a4, 0x1},
+	{0x900a5, 0x10},
+	{0x900a6, 0x109},
+	{0x900a7, 0x5},
+	{0x900a8, 0x7c0},
+	{0x900a9, 0x109},
+	{0x40000, 0x811},
+	{0x40020, 0x880},
+	{0x40040, 0x0},
+	{0x40060, 0x0},
+	{0x40001, 0x4008},
+	{0x40021, 0x83},
+	{0x40041, 0x4f},
+	{0x40061, 0x0},
+	{0x40002, 0x4040},
+	{0x40022, 0x83},
+	{0x40042, 0x51},
+	{0x40062, 0x0},
+	{0x40003, 0x811},
+	{0x40023, 0x880},
+	{0x40043, 0x0},
+	{0x40063, 0x0},
+	{0x40004, 0x720},
+	{0x40024, 0xf},
+	{0x40044, 0x1740},
+	{0x40064, 0x0},
+	{0x40005, 0x16},
+	{0x40025, 0x83},
+	{0x40045, 0x4b},
+	{0x40065, 0x0},
+	{0x40006, 0x716},
+	{0x40026, 0xf},
+	{0x40046, 0x2001},
+	{0x40066, 0x0},
+	{0x40007, 0x716},
+	{0x40027, 0xf},
+	{0x40047, 0x2800},
+	{0x40067, 0x0},
+	{0x40008, 0x716},
+	{0x40028, 0xf},
+	{0x40048, 0xf00},
+	{0x40068, 0x0},
+	{0x40009, 0x720},
+	{0x40029, 0xf},
+	{0x40049, 0x1400},
+	{0x40069, 0x0},
+	{0x4000a, 0xe08},
+	{0x4002a, 0xc15},
+	{0x4004a, 0x0},
+	{0x4006a, 0x0},
+	{0x4000b, 0x625},
+	{0x4002b, 0x15},
+	{0x4004b, 0x0},
+	{0x4006b, 0x0},
+	{0x4000c, 0x4028},
+	{0x4002c, 0x80},
+	{0x4004c, 0x0},
+	{0x4006c, 0x0},
+	{0x4000d, 0xe08},
+	{0x4002d, 0xc1a},
+	{0x4004d, 0x0},
+	{0x4006d, 0x0},
+	{0x4000e, 0x625},
+	{0x4002e, 0x1a},
+	{0x4004e, 0x0},
+	{0x4006e, 0x0},
+	{0x4000f, 0x4040},
+	{0x4002f, 0x80},
+	{0x4004f, 0x0},
+	{0x4006f, 0x0},
+	{0x40010, 0x2604},
+	{0x40030, 0x15},
+	{0x40050, 0x0},
+	{0x40070, 0x0},
+	{0x40011, 0x708},
+	{0x40031, 0x5},
+	{0x40051, 0x0},
+	{0x40071, 0x2002},
+	{0x40012, 0x8},
+	{0x40032, 0x80},
+	{0x40052, 0x0},
+	{0x40072, 0x0},
+	{0x40013, 0x2604},
+	{0x40033, 0x1a},
+	{0x40053, 0x0},
+	{0x40073, 0x0},
+	{0x40014, 0x708},
+	{0x40034, 0xa},
+	{0x40054, 0x0},
+	{0x40074, 0x2002},
+	{0x40015, 0x4040},
+	{0x40035, 0x80},
+	{0x40055, 0x0},
+	{0x40075, 0x0},
+	{0x40016, 0x60a},
+	{0x40036, 0x15},
+	{0x40056, 0x1200},
+	{0x40076, 0x0},
+	{0x40017, 0x61a},
+	{0x40037, 0x15},
+	{0x40057, 0x1300},
+	{0x40077, 0x0},
+	{0x40018, 0x60a},
+	{0x40038, 0x1a},
+	{0x40058, 0x1200},
+	{0x40078, 0x0},
+	{0x40019, 0x642},
+	{0x40039, 0x1a},
+	{0x40059, 0x1300},
+	{0x40079, 0x0},
+	{0x4001a, 0x4808},
+	{0x4003a, 0x880},
+	{0x4005a, 0x0},
+	{0x4007a, 0x0},
+	{0x900aa, 0x0},
+	{0x900ab, 0x790},
+	{0x900ac, 0x11a},
+	{0x900ad, 0x8},
+	{0x900ae, 0x7aa},
+	{0x900af, 0x2a},
+	{0x900b0, 0x10},
+	{0x900b1, 0x7b2},
+	{0x900b2, 0x2a},
+	{0x900b3, 0x0},
+	{0x900b4, 0x7c8},
+	{0x900b5, 0x109},
+	{0x900b6, 0x10},
+	{0x900b7, 0x10},
+	{0x900b8, 0x109},
+	{0x900b9, 0x10},
+	{0x900ba, 0x2a8},
+	{0x900bb, 0x129},
+	{0x900bc, 0x8},
+	{0x900bd, 0x370},
+	{0x900be, 0x129},
+	{0x900bf, 0xa},
+	{0x900c0, 0x3c8},
+	{0x900c1, 0x1a9},
+	{0x900c2, 0xc},
+	{0x900c3, 0x408},
+	{0x900c4, 0x199},
+	{0x900c5, 0x14},
+	{0x900c6, 0x790},
+	{0x900c7, 0x11a},
+	{0x900c8, 0x8},
+	{0x900c9, 0x4},
+	{0x900ca, 0x18},
+	{0x900cb, 0xe},
+	{0x900cc, 0x408},
+	{0x900cd, 0x199},
+	{0x900ce, 0x8},
+	{0x900cf, 0x8568},
+	{0x900d0, 0x108},
+	{0x900d1, 0x18},
+	{0x900d2, 0x790},
+	{0x900d3, 0x16a},
+	{0x900d4, 0x8},
+	{0x900d5, 0x1d8},
+	{0x900d6, 0x169},
+	{0x900d7, 0x10},
+	{0x900d8, 0x8558},
+	{0x900d9, 0x168},
+	{0x900da, 0x1ff8},
+	{0x900db, 0x85a8},
+	{0x900dc, 0x1e8},
+	{0x900dd, 0x50},
+	{0x900de, 0x798},
+	{0x900df, 0x16a},
+	{0x900e0, 0x60},
+	{0x900e1, 0x7a0},
+	{0x900e2, 0x16a},
+	{0x900e3, 0x8},
+	{0x900e4, 0x8310},
+	{0x900e5, 0x168},
+	{0x900e6, 0x8},
+	{0x900e7, 0xa310},
+	{0x900e8, 0x168},
+	{0x900e9, 0xa},
+	{0x900ea, 0x408},
+	{0x900eb, 0x169},
+	{0x900ec, 0x6e},
+	{0x900ed, 0x0},
+	{0x900ee, 0x68},
+	{0x900ef, 0x0},
+	{0x900f0, 0x408},
+	{0x900f1, 0x169},
+	{0x900f2, 0x0},
+	{0x900f3, 0x8310},
+	{0x900f4, 0x168},
+	{0x900f5, 0x0},
+	{0x900f6, 0xa310},
+	{0x900f7, 0x168},
+	{0x900f8, 0x1ff8},
+	{0x900f9, 0x85a8},
+	{0x900fa, 0x1e8},
+	{0x900fb, 0x68},
+	{0x900fc, 0x798},
+	{0x900fd, 0x16a},
+	{0x900fe, 0x78},
+	{0x900ff, 0x7a0},
+	{0x90100, 0x16a},
+	{0x90101, 0x68},
+	{0x90102, 0x790},
+	{0x90103, 0x16a},
+	{0x90104, 0x8},
+	{0x90105, 0x8b10},
+	{0x90106, 0x168},
+	{0x90107, 0x8},
+	{0x90108, 0xab10},
+	{0x90109, 0x168},
+	{0x9010a, 0xa},
+	{0x9010b, 0x408},
+	{0x9010c, 0x169},
+	{0x9010d, 0x58},
+	{0x9010e, 0x0},
+	{0x9010f, 0x68},
+	{0x90110, 0x0},
+	{0x90111, 0x408},
+	{0x90112, 0x169},
+	{0x90113, 0x0},
+	{0x90114, 0x8b10},
+	{0x90115, 0x168},
+	{0x90116, 0x1},
+	{0x90117, 0xab10},
+	{0x90118, 0x168},
+	{0x90119, 0x0},
+	{0x9011a, 0x1d8},
+	{0x9011b, 0x169},
+	{0x9011c, 0x80},
+	{0x9011d, 0x790},
+	{0x9011e, 0x16a},
+	{0x9011f, 0x18},
+	{0x90120, 0x7aa},
+	{0x90121, 0x6a},
+	{0x90122, 0xa},
+	{0x90123, 0x0},
+	{0x90124, 0x1e9},
+	{0x90125, 0x8},
+	{0x90126, 0x8080},
+	{0x90127, 0x108},
+	{0x90128, 0xf},
+	{0x90129, 0x408},
+	{0x9012a, 0x169},
+	{0x9012b, 0xc},
+	{0x9012c, 0x0},
+	{0x9012d, 0x68},
+	{0x9012e, 0x9},
+	{0x9012f, 0x0},
+	{0x90130, 0x1a9},
+	{0x90131, 0x0},
+	{0x90132, 0x408},
+	{0x90133, 0x169},
+	{0x90134, 0x0},
+	{0x90135, 0x8080},
+	{0x90136, 0x108},
+	{0x90137, 0x8},
+	{0x90138, 0x7aa},
+	{0x90139, 0x6a},
+	{0x9013a, 0x0},
+	{0x9013b, 0x8568},
+	{0x9013c, 0x108},
+	{0x9013d, 0xb7},
+	{0x9013e, 0x790},
+	{0x9013f, 0x16a},
+	{0x90140, 0x1f},
+	{0x90141, 0x0},
+	{0x90142, 0x68},
+	{0x90143, 0x8},
+	{0x90144, 0x8558},
+	{0x90145, 0x168},
+	{0x90146, 0xf},
+	{0x90147, 0x408},
+	{0x90148, 0x169},
+	{0x90149, 0xd},
+	{0x9014a, 0x0},
+	{0x9014b, 0x68},
+	{0x9014c, 0x0},
+	{0x9014d, 0x408},
+	{0x9014e, 0x169},
+	{0x9014f, 0x0},
+	{0x90150, 0x8558},
+	{0x90151, 0x168},
+	{0x90152, 0x8},
+	{0x90153, 0x3c8},
+	{0x90154, 0x1a9},
+	{0x90155, 0x3},
+	{0x90156, 0x370},
+	{0x90157, 0x129},
+	{0x90158, 0x20},
+	{0x90159, 0x2aa},
+	{0x9015a, 0x9},
+	{0x9015b, 0x8},
+	{0x9015c, 0xe8},
+	{0x9015d, 0x109},
+	{0x9015e, 0x0},
+	{0x9015f, 0x8140},
+	{0x90160, 0x10c},
+	{0x90161, 0x10},
+	{0x90162, 0x8138},
+	{0x90163, 0x104},
+	{0x90164, 0x8},
+	{0x90165, 0x448},
+	{0x90166, 0x109},
+	{0x90167, 0xf},
+	{0x90168, 0x7c0},
+	{0x90169, 0x109},
+	{0x9016a, 0x0},
+	{0x9016b, 0xe8},
+	{0x9016c, 0x109},
+	{0x9016d, 0x47},
+	{0x9016e, 0x630},
+	{0x9016f, 0x109},
+	{0x90170, 0x8},
+	{0x90171, 0x618},
+	{0x90172, 0x109},
+	{0x90173, 0x8},
+	{0x90174, 0xe0},
+	{0x90175, 0x109},
+	{0x90176, 0x0},
+	{0x90177, 0x7c8},
+	{0x90178, 0x109},
+	{0x90179, 0x8},
+	{0x9017a, 0x8140},
+	{0x9017b, 0x10c},
+	{0x9017c, 0x0},
+	{0x9017d, 0x478},
+	{0x9017e, 0x109},
+	{0x9017f, 0x0},
+	{0x90180, 0x1},
+	{0x90181, 0x8},
+	{0x90182, 0x8},
+	{0x90183, 0x4},
+	{0x90184, 0x0},
+	{0x90006, 0x8},
+	{0x90007, 0x7c8},
+	{0x90008, 0x109},
+	{0x90009, 0x0},
+	{0x9000a, 0x400},
+	{0x9000b, 0x106},
+	{0xd00e7, 0x400},
+	{0x90017, 0x0},
+	{0x9001f, 0x2b},
+	{0x90026, 0x69},
+	{0x400d0, 0x0},
+	{0x400d1, 0x101},
+	{0x400d2, 0x105},
+	{0x400d3, 0x107},
+	{0x400d4, 0x10f},
+	{0x400d5, 0x202},
+	{0x400d6, 0x20a},
+	{0x400d7, 0x20b},
+	{0x2003a, 0x2},
+	{0x200be, 0x3},
+	{0x2000b, 0x75},
+	{0x2000c, 0xe9},
+	{0x2000d, 0x91c},
+	{0x2000e, 0x2c},
+	{0x9000c, 0x0},
+	{0x9000d, 0x173},
+	{0x9000e, 0x60},
+	{0x9000f, 0x6110},
+	{0x90010, 0x2152},
+	{0x90011, 0xdfbd},
+	{0x90012, 0x2060},
+	{0x90013, 0x6152},
+	{0x20010, 0x5a},
+	{0x20011, 0x3},
+	{0x40080, 0xe0},
+	{0x40081, 0x12},
+	{0x40082, 0xe0},
+	{0x40083, 0x12},
+	{0x40084, 0xe0},
+	{0x40085, 0x12},
+	{0x400fd, 0xf},
+	{0x400f1, 0xe},
+	{0x10011, 0x1},
+	{0x10012, 0x1},
+	{0x10013, 0x180},
+	{0x10018, 0x1},
+	{0x10002, 0x6209},
+	{0x100b2, 0x1},
+	{0x101b4, 0x1},
+	{0x102b4, 0x1},
+	{0x103b4, 0x1},
+	{0x104b4, 0x1},
+	{0x105b4, 0x1},
+	{0x106b4, 0x1},
+	{0x107b4, 0x1},
+	{0x108b4, 0x1},
+	{0x11011, 0x1},
+	{0x11012, 0x1},
+	{0x11013, 0x180},
+	{0x11018, 0x1},
+	{0x11002, 0x6209},
+	{0x110b2, 0x1},
+	{0x111b4, 0x1},
+	{0x112b4, 0x1},
+	{0x113b4, 0x1},
+	{0x114b4, 0x1},
+	{0x115b4, 0x1},
+	{0x116b4, 0x1},
+	{0x117b4, 0x1},
+	{0x118b4, 0x1},
+	{0x20089, 0x1},
+	{0x20088, 0x19},
+	{0xc0080, 0x0},
+	{0xd0000, 0x1},
+
+};
+
+static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
+	{
+		/* P0 3733mts 1D */
+		.drate = 3733,
+		.fw_type = FW_1D_IMAGE,
+		.fsp_cfg = ddr_fsp0_cfg,
+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
+
+	},
+
+	{
+		/* P0 3733mts 2D */
+		.drate = 3733,
+		.fw_type = FW_2D_IMAGE,
+		.fsp_cfg = ddr_fsp0_2d_cfg,
+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
+	},
+
+};
+
+/* ddr timing config params */
+struct dram_timing_info dram_timing = {
+	.ddrc_cfg = ddr_ddrc_cfg,
+	.ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
+	.ddrphy_cfg = ddr_ddrphy_cfg,
+	.ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
+	.fsp_msg = ddr_dram_fsp_msg,
+	.fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
+	.ddrphy_trained_csr = ddr_ddrphy_trained_csr,
+	.ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
+	.ddrphy_pie = ddr_phy_pie,
+	.ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
+	.fsp_table = { 3733, },
+	.fsp_cfg = ddr_dram_fsp_cfg,
+	.fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
+};
board/phytec/imx93_phycore/spl.c new file +50 -0
new file mode 100644
index 00000000000..6911f2800ad
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ */
+
+#include <command.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/imx93_pins.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/arch-mx7ulp/gpio.h>
+#include <asm/sections.h>
+#include <asm/mach-imx/syscounter.h>
+#include <asm/mach-imx/ele_api.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+#include <linux/delay.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ccm_regs.h>
+#include <asm/arch/ddr.h>
+#include <power/pmic.h>
+#include <power/pca9450.h>
+#include <asm/arch/trdc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Will be part of drivers/power/regulator/pca9450.c
+ * when pca9451a support is added.
+ */
+#define PCA9450_REG_PWRCTRL_TOFF_DEB    BIT(5)
+
+int spl_board_boot_device(enum boot_device boot_dev_spl)
+{
+	if (IS_ENABLED(CONFIG_SPL_BOOTROM_SUPPORT))
+		return BOOT_DEVICE_BOOTROM;> +
+	switch (boot_dev_spl) {

board/phytec/imx93_phycore/spl.c line 60

Quoted 10 lines
board/phytec/imx93_phycore/spl.c new file +10 -0
+	case SD1_BOOT:
+	case MMC1_BOOT:
+		return BOOT_DEVICE_MMC1;
+	case SD2_BOOT:
+	case MMC2_BOOT:
+		return BOOT_DEVICE_MMC2;
+	default:
+		return BOOT_DEVICE_NONE;
+	}
+}

Can we asume ONFIG_SPL_BOOTROM_SUPPORT will always be true here? In that case we can remove switch construct.

Quoted 325 lines
board/phytec/imx93_phycore/spl.c new file +120 -0
+
+void spl_board_init(void)
+{
+	puts("Normal Boot\n");
+}
+
+void spl_dram_init(void)
+{
+	ddr_init(&dram_timing);
+}
+
+int power_init_board(void)
+{
+	struct udevice *dev;
+	int ret;
+	unsigned int val = 0;
+
+	if (!IS_ENABLED(CONFIG_DM_PMIC_PCA9450))
+		return 0;
+
+	ret = pmic_get("pmic@25", &dev);
+	if (ret == -ENODEV) {
+		puts("No pca9450@25\n");
+		return 0;
+	}
+	if (ret != 0)
+		return ret;
+
+	/* BUCKxOUT_DVS0/1 control BUCK123 output */
+	pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
+
+	/* enable DVS control through PMIC_STBY_REQ */
+	pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
+
+	ret = pmic_reg_read(dev, PCA9450_PWR_CTRL);
+	if (ret < 0)
+		return ret;
+
+	val = ret;
+	if (IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)) {
+		/* 0.8v for Low drive mode
+		 */
+		if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) {
+			pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x0c);
+			pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x0c);
+		} else {
+			pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x10);
+			pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x10);
+		}
+	} else {
+		/* 0.9v for Over drive mode
+		 */
+		if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) {
+			pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14);
+			pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x14);
+		} else {
+			pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x18);
+			pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x18);
+		}
+	}
+
+	/* set standby voltage to 0.65v */
+	if (val & PCA9450_REG_PWRCTRL_TOFF_DEB)
+		pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x0);
+	else
+		pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x4);
+
+	/* I2C_LT_EN*/
+	pmic_reg_write(dev, 0xa, 0x3);
+
+	return 0;
+}
+
+extern int imx9_probe_mu(void *ctx, struct event *event);
+void board_init_f(ulong dummy)
+{
+	int ret;
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	timer_init();
+
+	arch_cpu_init();
+
+	board_early_init_f();
+
+	spl_early_init();
+
+	preloader_console_init();
+
+	ret = imx9_probe_mu(NULL, NULL);
+	if (ret) {
+		printf("Fail to init ELE API\n");
+	} else {
+		printf("SOC: 0x%x\n", gd->arch.soc_rev);
+		printf("LC: 0x%x\n", gd->arch.lifecycle);
+	}
+
+	power_init_board();
+
+	if (!IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE))
+		set_arm_core_max_clk();
+
+	/* Init power of mix */
+	soc_power_init();
+
+	/* Setup TRDC for DDR access */
+	trdc_init();
+
+	/* DDR initialization */
+	spl_dram_init();
+
+	/* Put M33 into CPUWAIT for following kick */
+	ret = m33_prepare();
+	if (!ret)
+		printf("M33 prepare ok\n");
+
+	board_init_r(NULL, 0);
+}
configs/imx93_phycore_defconfig new file +147 -0
new file mode 100644
index 00000000000..4d9d790e0f6
@@ -0,0 +1,147 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX9=y
+CONFIG_TEXT_BASE=0x80200000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_OFFSET=0x700000
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx93-phycore-segin"
+CONFIG_SPL_TEXT_BASE=0x2049A000
+CONFIG_TARGET_IMX93_PHYCORE=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x20519dd0
+CONFIG_SPL=y
+CONFIG_CMD_DEKBLOB=y
+CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_SYS_LOAD_ADDR=0x80400000
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x90000000
+CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=1
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTCOMMAND="run distro_bootcmd;run bsp_bootcmd"
+CONFIG_DEFAULT_FDT_FILE="imx93-phycore-segin.dtb"
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x26000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x2051a000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2074
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_WDT=y
+CONFIG_BOOTP_PREFER_SERVERIP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_RTC=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GETTIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_SOURCE_FILE="imx93_phycore"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eth1"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SYSCON=y
+CONFIG_SPL_CLK_IMX93=y
+CONFIG_CLK_IMX93=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_GPIO_HOG=y
+CONFIG_IMX_RGPIO2P=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_IMX=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_MIPI_DPHY_HELPERS=y
+CONFIG_PHY_IMX93_MIPI_DPHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX93=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX93_BLK_CTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PCA9450=y
+CONFIG_SPL_DM_PMIC_PCA9450=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PCA9450=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2131=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
+CONFIG_ULP_WATCHDOG=y
+CONFIG_WDT=y
+CONFIG_LZO=y
+CONFIG_BZIP2=y
doc/board/phytec/imx93_phycore.rst new file +46 -0
new file mode 100644
index 00000000000..f9b87691cdc
@@ -0,0 +1,68 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx93_phytec
+============
+
+U-Boot for the NXP i.MX93 Phytec SoM of a Segin board
+
+Quick Start
+-----------
+
+- Get and Build the ARM Trusted firmware
+- Get the DDR firmware
+- Get ahab-container.img
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://github.com/nxp-imx/imx-atf/
+branch: lf_v2.8
+
+.. code-block:: bash
+
+   $ unset LDFLAGS
+   $ make PLAT=imx93 bl31
+   $ cp build/imx93/release/bl31.bin $(srctree)
+
+Get the DDR firmware
+--------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin
+   $ chmod +x firmware-imx-8.21.bin
+   $ ./firmware-imx-8.21.bin
+   $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+
+Get ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
+   $ chmod +x firmware-sentinel-0.10.bin

doc/board/phytec/imx93_phycore.rst line 56

Quoted 10 lines
doc/board/phytec/imx93_phycore.rst new file +10 -0
+   $ ./firmware-sentinel-0.10.bin
+   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-
+   $ make imx93_phytec_defconfig

Rename to phycore-imx93_defconfig

Quoted 76 lines
doc/board/phytec/imx93_phycore.rst new file +12 -0
+   $ make
+
+Burn the flash.bin to MicroSD card offset 32KB:
+
+.. code-block:: bash
+
+   $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+
+Set Boot switch to SD boot
doc/board/phytec/index.rst +1 -0
index 9996bce9741..a740f0cbae4 100644
@@ -7,5 +7,6 @@ PHYTEC
    :maxdepth: 2
 
    imx8mm-phygate-tauri-l
+   imx93_phycore
    phycore-imx8mm
    phycore-imx8mp
include/configs/imx93_phycore.h new file +47 -0
new file mode 100644
index 00000000000..ee1322c9b52
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ */
+
+#ifndef __IMX93_PHYCORE_H
+#define __IMX93_PHYCORE_H
+
+#include <linux/sizes.h>
+#include <linux/stringify.h>
+#include <asm/arch/imx-regs.h>
+
+#define CFG_SYS_UBOOT_BASE	\
+	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1)
+
+#include <config_distro_bootcmd.h>
+
+/* Initial environment variables */
+#define CFG_EXTRA_ENV_SETTINGS BOOTENV
+
+#define CFG_SYS_INIT_RAM_ADDR        0x80000000
+#define CFG_SYS_INIT_RAM_SIZE        0x200000
+
+#define CFG_SYS_SDRAM_BASE           0x80000000
+#define PHYS_SDRAM                   0x80000000
+#define PHYS_SDRAM_SIZE              0x80000000
+
+#define CFG_SYS_FSL_USDHC_NUM	2
+
+/* Using ULP WDOG for reset */
+#define WDOG_BASE_ADDR          WDG3_BASE_ADDR
+
+#if defined(CONFIG_CMD_NET)
+#define PHY_ANEG_TIMEOUT 20000
+#endif
+
+#ifdef CONFIG_IMX_MATTER_TRUSTY
+#define NS_ARCH_ARM64 1
+#endif
+
+#endif
#3 lore raw

Hi,

Thanks for the review!

Quoted 3 lines

s/imx93_phycore/phycore_imx93

To fit into existing PHYTEC boards already in tree.

I deliberately picked that order so that it is aligned with most imx boards already supported by u-boot.

The supported imx93 boards follow that pattern:

- imx93_var_som
- imx93_evk

So it felt natural to have:

- imx93_phycore

Plus the kernel device-trees are also following that order:

- imx93-phycore-xxx

On the other hand, it is true that the existing phycore boards use the phytec_* pattern:

- phycore_am335x_r2
- phycore_imx8mm
- phycore_imx8mp
- phycore_rk3288/

So that will be confusing no matter the option that we choose.

I will come up with a v2 fixing your other remarks, but I think that this should be addressed beforehand.

Thanks,

Mathieu

#4 lore raw

Hi Mathieu

Quoted 33 lines · Mathieu Othacehe

Hi,

Thanks for the review!

Quoted 3 lines

s/imx93_phycore/phycore_imx93

To fit into existing PHYTEC boards already in tree.

I deliberately picked that order so that it is aligned with most imx boards already supported by u-boot.

The supported imx93 boards follow that pattern:

- imx93_var_som
- imx93_evk

So it felt natural to have:

- imx93_phycore

Plus the kernel device-trees are also following that order:

- imx93-phycore-xxx

On the other hand, it is true that the existing phycore boards use the phytec_* pattern:

- phycore_am335x_r2
- phycore_imx8mm
- phycore_imx8mp
- phycore_rk3288/

Quoted 4 lines

So that will be confusing no matter the option that we choose.

I will come up with a v2 fixing your other remarks, but I think that this should be addressed beforehand.

We decided not to alter the names after the fact, but for imx8 product family we noticed the same problem.
Anyway, to avoid this whole issue, please name the defconfig and the device tree to imx93-phyboard- segin. This avoids the challenge of naming configs when you have multiple carrier boards supported for the same SoM. Further, for the board/phytec/ dir, only phytec board code is in there, so you may stick to the phytec naming convention (i.e. phycore_imx93 as Primoz suggested). This also allows to reuse the phycore code (see imx8mm-phygate-tauri-l for reference).

Yannic

Quoted 8 lines

Thanks,

Mathieu
_______________________________________________
upstream mailing list
[email protected]
http://lists.phytec.de/cgi-bin/mailman/listinfo/upstream

#5 lore raw
In reply to Mathieu Othacehe

Hello Mathieu

As a heads-up: you need to rebase as am62 (doc) got applied by Tom.

Quoted 39 lines · Mathieu Othacehe

Add support for the Phytec i.MX93 Segin evaluation kit. The SoM consists of an NXP i.MX93 dual A55 CPU. The SoM is mounted on a Phytec Segin SBC.

---
 arch/arm/dts/Makefile                         |    3 +- arch/arm/dts/imx93-phycore-segin-u-boot.dtsi  |  274 +++ arch/arm/dts/imx93-phycore-segin.dts          |   95 + arch/arm/dts/imx93-phycore-som.dtsi           |   64 + arch/arm/mach-imx/imx9/Kconfig                |    6 + board/phytec/common/mmc.c                     |   49 + board/phytec/imx93_phycore/Kconfig            |   21 + board/phytec/imx93_phycore/MAINTAINERS        |   10 + board/phytec/imx93_phycore/Makefile           |   16 + board/phytec/imx93_phycore/imx93_phycore.c    |   89 + board/phytec/imx93_phycore/imx93_phycore.env  |   96 + .../phytec/imx93_phycore/lpddr4_timing_1GB.c  | 1546 +++++++++++++++++ board/phytec/imx93_phycore/spl.c              |  181 ++ configs/imx93_phycore_defconfig               |  147 ++ doc/board/phytec/imx93_phycore.rst            |   68 + doc/board/phytec/index.rst                    |    1 + include/configs/imx93_phycore.h               |   47 +

 17 files changed, 2712 insertions(+), 1 deletion(-)

 create mode 100644 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi create mode 100644 arch/arm/dts/imx93-phycore-segin.dts create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi create mode 100644 board/phytec/common/mmc.c
 create mode 100644 board/phytec/imx93_phycore/Kconfig create mode 100644 board/phytec/imx93_phycore/MAINTAINERS create mode 100644 board/phytec/imx93_phycore/Makefile create mode 100644 board/phytec/imx93_phycore/imx93_phycore.c create mode 100644 board/phytec/imx93_phycore/imx93_phycore.env create mode 100644 board/phytec/imx93_phycore/lpddr4_timing_1GB.c create mode 100644 board/phytec/imx93_phycore/spl.c create mode 100644 configs/imx93_phycore_defconfig create mode 100644 doc/board/phytec/imx93_phycore.rst create mode 100644 include/configs/imx93_phycore.h

<snip>

doc/board/phytec/imx93_phycore.rst line 4

Quoted 11 lines
doc/board/phytec/imx93_phycore.rst new file +4 -0
new file mode 100644
index 00000000000..f9b87691cdc
@@ -0,0 +1,68 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx93_phytec
+============

rename it to phyCORE-i.MX 93 please, as this is the official name. See
https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/

doc/board/phytec/imx93_phycore.rst line 6

Quoted 2 lines
doc/board/phytec/imx93_phycore.rst new file +2 -0
+
+U-Boot for the NXP i.MX93 Phytec SoM of a Segin board

Same here; Use official naming, please.

Quoted 5 lines
doc/board/phytec/imx93_phycore.rst new file +5 -0
+
+Quick Start
+-----------
+
+- Get and Build the ARM Trusted firmware

doc/board/phytec/imx93_phycore.rst line 21

Quoted 10 lines
doc/board/phytec/imx93_phycore.rst new file +10 -0
+- Get the DDR firmware
+- Get ahab-container.img
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://github.com/nxp-imx/imx-atf/

Is the trusted-firmware-a upstream version working? If so, please use that instead.

Quoted 24 lines
doc/board/phytec/imx93_phycore.rst new file +24 -0
+branch: lf_v2.8
+
+.. code-block:: bash
+
+   $ unset LDFLAGS
+   $ make PLAT=imx93 bl31
+   $ cp build/imx93/release/bl31.bin $(srctree)
+
+Get the DDR firmware
+--------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin
+   $ chmod +x firmware-imx-8.21.bin
+   $ ./firmware-imx-8.21.bin
+   $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+
+Get ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin

doc/board/phytec/imx93_phycore.rst line 55

Quoted 10 lines
doc/board/phytec/imx93_phycore.rst new file +10 -0
+   $ chmod +x firmware-sentinel-0.10.bin
+   $ ./firmware-sentinel-0.10.bin
+   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-

Leave this as generic as possible please. ARM toolchain should be sufficient.

doc/board/phytec/imx93_phycore.rst line 68

Quoted 13 lines
doc/board/phytec/imx93_phycore.rst new file +13 -0
+   $ make imx93_phytec_defconfig
+   $ make
+
+Burn the flash.bin to MicroSD card offset 32KB:
+
+.. code-block:: bash
+
+   $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+
+Set Boot switch to SD boot

Add info to what position(s) the boot switches must be set.

Quoted 29 lines
doc/board/phytec/index.rst +0 -0
index 9996bce9741..a740f0cbae4 100644
@@ -7,5 +7,6 @@ PHYTEC

    :maxdepth: 2

    imx8mm-phygate-tauri-l
+   imx93_phycore
    phycore-imx8mm
    phycore-imx8mp

include/configs/imx93_phycore.h new file +12 -0
new file mode 100644
index 00000000000..ee1322c9b52
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <[email protected]>
+ */
+
+#ifndef __IMX93_PHYCORE_H
+#define __IMX93_PHYCORE_H
+
+#include <linux/sizes.h>
+#include <linux/stringify.h>

include/configs/imx93_phycore.h line 22

Quoted 10 lines
include/configs/imx93_phycore.h new file +10 -0
+#include <asm/arch/imx-regs.h>
+
+#define CFG_SYS_UBOOT_BASE	\
+	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1)
+
+#include <config_distro_bootcmd.h>

I don't see a specific reason to have this include separate?! Group it with the others, please.

Yannic

Quoted 25 lines
include/configs/imx93_phycore.h new file +25 -0
+
+/* Initial environment variables */
+#define CFG_EXTRA_ENV_SETTINGS BOOTENV
+
+#define CFG_SYS_INIT_RAM_ADDR        0x80000000
+#define CFG_SYS_INIT_RAM_SIZE        0x200000
+
+#define CFG_SYS_SDRAM_BASE           0x80000000
+#define PHYS_SDRAM                   0x80000000
+#define PHYS_SDRAM_SIZE              0x80000000
+
+#define CFG_SYS_FSL_USDHC_NUM	2
+
+/* Using ULP WDOG for reset */
+#define WDOG_BASE_ADDR          WDG3_BASE_ADDR
+
+#if defined(CONFIG_CMD_NET)
+#define PHY_ANEG_TIMEOUT 20000
+#endif
+
+#ifdef CONFIG_IMX_MATTER_TRUSTY
+#define NS_ARCH_ARM64 1
+#endif
+
+#endif
#6 lore raw

Hello Yannic,

Quoted 1 line

As a heads-up: you need to rebase as am62 (doc) got applied by Tom.

Noted.

Quoted 1 line

Is the trusted-firmware-a upstream version working? If so, please use that instead.

It is but only on the master branch, so it might be better to stick to the nxp-imx repository until a lts release is created.

Quoted 3 lines
Quoted 1 line

+#include <config_distro_bootcmd.h>

I don't see a specific reason to have this include separate?! Group it with the others, please.

Many other include files place it here, right after the BOOT_TARGET_DEVICES macro, so I guess there must be a reason, even though I am unsure why :).

Thanks,

Mathieu

#7 lore raw
Quoted 11 lines · Mathieu Othacehe

Hello Yannic,

Quoted 1 line

As a heads-up: you need to rebase as am62 (doc) got applied by Tom.

Noted.

Quoted 1 line

Is the trusted-firmware-a upstream version working? If so, please use that instead.

It is but only on the master branch, so it might be better to stick to the nxp-imx repository until a lts release is created.

Ok, sounds reasonable.

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

+#include <config_distro_bootcmd.h>

I don't see a specific reason to have this include separate?! Group it with the others, please.

Many other include files place it here, right after the BOOT_TARGET_DEVICES macro, so I guess there must be a reason, even though I am unsure why :).

See doc/develop/distro.rst for information. The reason to have this separate is to have this wrapped in ifdefs. Since you have this unconditionally, you may move this include as far as I can tell.

Quoted 4 lines

Thanks,

Mathieu