Need blocking /dev/null
I noticed that I need a pseudodevice that opens normally but blocks all reads (and writes). The only way out would be through a signal. Neither /dev/zero nor /dev/null block, but is there some other standard device that would do the job?
If there isn't, writing such a pseudodevice would be trivial. What should it be called? Any chance of including that in the kernel?
Marko
Signature · 1 line
Marko Rauhamaa mailto:[email protected] http://www.pacujo.nu/marko/
Quoted 2 lines
I noticed that I need a pseudodevice that opens normally but blocks all reads (and writes). The only way out would be through a signal. Neither
Try using a pipe
Quoted 4 lines
Quoted 2 lines
I noticed that I need a pseudodevice that opens normally but blocks all reads (and writes). The only way out would be through a signal. Neither
Try using a pipe
You're right. This is what I wanted to do:
while true
do
ssh -R a:b:c host
sleep 10
done </dev/never >/dev/null
But I could do it like this:
while true
do
sleep 100000
done |
while true
do
ssh -R a:b:c host
sleep 10
done >/dev/null
Thank you.
Marko
PS Are /dev/null and /dev/zero also redundant?
Signature · 1 line
Marko Rauhamaa mailto:[email protected] http://www.pacujo.nu/marko/
Quoted 17 lines · Marko Rauhamaa
Quoted 4 lines
Quoted 2 lines
I noticed that I need a pseudodevice that opens normally but blocks all reads (and writes). The only way out would be through a signal. Neither
Try using a pipe
You're right. This is what I wanted to do:
while true
do
ssh -R a:b:c host
sleep 10
done </dev/never>/dev/nullBut I could do it like this:
while true
do
Quoted 7 lines
sleep 100000done |
while true
do
ssh -R a:b:c host
sleep 10
done >/dev/null
Highly elegant :)
How bout just mkfifo /tmp/blockme
and read on /tmp/blockme - just don't write to it!
Signature · 1 line
TimC -- http://www.physics.usyd.edu.au/~tcon/
Quoted 1 line
cat ~/.signature
CPU time limit exceeded (core dumped)
Quoted 2 lines
How bout just
mkfifo /tmp/blockme
and read on/tmp/blockme- just don't write to it!
I don't think that will work, not the same way anyway. The problem is it will block on open(2) and will never get to read(2).
Marko
Signature · 1 line
Marko Rauhamaa mailto:[email protected] http://www.pacujo.nu/marko/
Hi Marko.
Quoted 1 line
PS Are
/dev/nulland/dev/zeroalso redundant?
I regularly use both...
1. Find a download that doesn't appear where one expected it...
find / -name "wanted-but-lost-download" 2> /dev/null
2. Create a loop-mounted partition to populate as a CD image before burning the CD in question.
dd if=/dev/zero bs=1048576 count=750 of=/tmp/cd.img mke2fs /tmp/cd.img
mount -o loop /tmp/cd.img /img/cd
3. Create a loop-mounted partition to populate as a floppy image.
dd if=/dev/zero bs=1024 count=1440 of=/tmp/floppy.img mke2fs /tmp/floppy.img mount -o loop /tmp/floppy.img /img/floppy
Neither has alternatives that make sense as far as I can see.
Best wishes from Riley.
On Wed, Oct 31, 2001 at 12:51:29AM +0000, you [Riley Williams] claimed:
Quoted 17 lines
Hi Marko.
Quoted 1 line
PS Are
/dev/nulland/dev/zeroalso redundant?I regularly use both...
1. Find a download that doesn't appear where one expected it...
find / -name "wanted-but-lost-download" 2>
/dev/null2. Create a loop-mounted partition to populate as a CD image before burning the CD in question.
dd if=/dev/zero bs=1048576 count=750 of=/tmp/cd.img mke2fs
/tmp/cd.img
mount -o loop/tmp/cd.img/img/cd
Quoted 7 lines
3. Create a loop-mounted partition to populate as a floppy image.
dd if=/dev/zero bs=1024 count=1440 of=/tmp/floppy.img mke2fs /tmp/floppy.img mount -o loop /tmp/floppy.img /img/floppyNeither has alternatives that make sense as far as I can see.
Certainly have in the sense that you could theoretically do that in user space.
find / -name "wanted-but-lost-download" | eat
zerofill | head -c 1440k > /tmp/floppy.img
ssh foo@bar | block
etc.
(Implementation of eat, block and zerofill is left as an exercise...)
-- v --
Hi Ville.
Quoted 17 lines
Quoted 17 lines
Quoted 1 line
PS Are
/dev/nulland/dev/zeroalso redundant?I regularly use both...
1. Find a download that doesn't appear where one expected it...
find / -name "wanted-but-lost-download" 2>
/dev/null2. Create a loop-mounted partition to populate as a CD image before burning the CD in question.
dd if=/dev/zero bs=1048576 count=750 of=/tmp/cd.img mke2fs
/tmp/cd.img
mount -o loop/tmp/cd.img/img/cd3. Create a loop-mounted partition to populate as a floppy image.
Quoted 8 lines
Quoted 5 lines
dd if=/dev/zero bs=1024 count=1440 of=/tmp/floppy.img mke2fs /tmp/floppy.img mount -o loop /tmp/floppy.img /img/floppyNeither has alternatives that make sense as far as I can see.
Certainly have in the sense that you could theoretically do that in user space.
Are you sure?
Quoted 1 line
find / -name "wanted-but-lost-download" | eat
Doesn't work - you're piping the stdin there, not stderr as per my example above. AFAIK, there's no way to pipe stderr without also piping stdout, hence this sort of solution just doesn't work.
AFAICS, there is no sane alternative to /dev/null in userspace.
Quoted 1 line
zerofill | head -c 1440k >
/tmp/floppy.img
How does zerofill know when to stop writing zeros out? After all, if it doesn't write enough out for the head call, then it's no longer an equivalent to /dev/zero, and it could easily be called with just about ANY positive number of bytes, including an infinite number, as in...
zerofill | tr '\0' '@' > /dev/ttyS1
...which sends an infinite stream of 0x40 bytes to the serial port.
However...
zerofill 750M > /tmp/img.cd
zerofill 1440k > /tmp/img.floppy
...would be a reasonable userspace equivalent to examples (2) and (3) respectively, so that certainly could be done in userspace.
Quoted 1 line
ssh foo@bar | block
Which of my examples is this an equivalent to? I don't recognise it.
Quoted 2 lines
(Implementation of eat, block and zerofill is left as an exercise...)
I'll leave that to somebody with more unwanted time than I have...
Best wishes from Riley.
Quoted 7 lines · Riley Williams
Are you sure?
Quoted 1 line
find / -name "wanted-but-lost-download" | eat
Doesn't work - you're piping the stdin there, not stderr as per my example above. AFAIK, there's no way to pipe stderr without also piping stdout, hence this sort of solution just doesn't work.
The Bourne shell is more perverse than you realize:
$ exec 3>&1; find / -name "wanted-but-lost-download" 2>&1 1>&3 3>&- | eat
[stolen from "Csh Programming Considered Harmful" by Tom Christiansen]
Horrible, but does work. ;)
Quoted 3 lines
Quoted 1 line
zerofill | head -c 1440k >
/tmp/floppy.imgHow does zerofill know when to stop writing zeros out?
Easy, it gets EPIPE on the write (or gets killed by SIGPIPE if it's stupid).
Quoted 3 lines
Quoted 1 line
ssh foo@bar | block
Which of my examples is this an equivalent to? I don't recognise it.
None; he's referring to the /dev/block example that started the thread.
I'm still happy to keep /dev/null and /dev/zero. ;)
-Doug
Signature · 2 lines
Let us cross over the river, and rest under the shade of the trees. --T. J. Jackson, 1863
Hi Doug.
Quoted 8 lines
Quoted 7 lines
Are you sure?
Quoted 1 line
find / -name "wanted-but-lost-download" | eat
Doesn't work - you're piping the stdin there, not stderr as per my example above. AFAIK, there's no way to pipe stderr without also piping stdout, hence this sort of solution just doesn't work.
Quoted 7 lines
The Bourne shell is more perverse than you realize:
$ exec 3>&1; find / -name "wanted-but-lost-download" 2>&1 1>&3 3>&- | eat[stolen from "Csh Programming Considered Harmful" by Tom Christiansen]
Horrible, but does work. ;)
Are you sure that works with BASH ? I've seen it listed (without the exec 3>&1; at the beginning) as a CSH method for doing this, but I've never had it work under bash, so presume the exec at the beginning is needed for bash to be able to do this. Is that right?
Also, even if it's true, is that also true with all other possible shells? Redirecting to /dev/null is independant of the shells, but piping hacks like that aren't.
I'm not on bash at the moment, and don't have it available, but I'll try it when I get home...
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
zerofill | head -c 1440k >
/tmp/floppy.imgHow does zerofill know when to stop writing zeros out?
Easy, it gets EPIPE on the write (or gets killed by SIGPIPE if it's stupid).
So it should be deliberately written to write them out in an infinite loop? Makes a bizarre sort of sense, but not something I would ever do.
Also, as I've had pointed out to me, one sometimes needs to tell a program to take input other than stdin from /dev/zero and that often can't be done using pipes. The friend who pointed this out to me recently had reason to do precicely this. The following isn't exactly what he needed, but is similar...
Q> ebcdic2ascii < /dev/ttyS1 | tr A-Z a-z | bindiff /dev/zero /dev/stdin
...and I would be very interested in a shell script to duplicate that using the zerofill program referred to above.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
ssh foo@bar | block
Which of my examples is this an equivalent to? I don't recognise it.
None; he's referring to the
/dev/blockexample that started the thread.I'm still happy to keep
/dev/nulland/dev/zero. ;)
So am I.
Best wishes from Riley.
Quoted 18 lines · Riley Williams
Hi Doug.
Quoted 16 lines
Quoted 7 lines
Are you sure?
Quoted 1 line
find / -name "wanted-but-lost-download" | eat
Doesn't work - you're piping the stdin there, not stderr as per my example above. AFAIK, there's no way to pipe stderr without also piping stdout, hence this sort of solution just doesn't work.
The Bourne shell is more perverse than you realize:
$ exec 3>&1; find / -name "wanted-but-lost-download" 2>&1 1>&3 3>&- | eat[stolen from "Csh Programming Considered Harmful" by Tom Christiansen]
Horrible, but does work. ;)
You really do take the hard way. Try this to pipe just stderr:command_that_outputs_on_1_and_2 2>/dev/stdout 1>/dev/null | eat
On Fri, Nov 02, 2001 at 04:04:13PM -0400, you [John Adams] claimed:
Quoted 10 lines
Quoted 7 lines
Quoted 7 lines
$ exec 3>&1; find / -name "wanted-but-lost-download" 2>&1 1>&3 3>&- | eat[stolen from "Csh Programming Considered Harmful" by Tom Christiansen]
Horrible, but does work. ;)
You really do take the hard way. Try this to pipe just stderr:
command_that_outputs_on_1_and_22>/dev/stdout 1>/dev/null | eat
Hmm.
The initial question was how to do
find / -name foo 2> /dev/null
or similar if /dev/null is not present. (Eat is a place holder for a imaginary progrom acting as /dev/null replacement).
I guess
find / -name foo 2>/dev/stdout 1>/dev/stderr | eat
would (kinda) work, but it fails if you want to do
find / -name foo 2> /dev/null | less
Can be done with named pipes, though.
-- v --
I think that
find / -name foo 2>&-
should do the trick (under ksh, anyway, and
probably zsh or bash as well). Csh variants
IIRC don't have the concept of closing a
file descriptor...
tw
Quoted 19 lines
Quoted 19 lines
The initial question was how to do
find / -name foo 2>
/dev/nullor similar if
/dev/nullis not present. (Eat is a place holder for a imaginary progrom acting as/dev/nullreplacement).I guess
find / -name foo 2>/dev/stdout 1>/dev/stderr | eat
would (kinda) work, but it fails if you want to do
find / -name foo 2>
/dev/null| lessCan be done with named pipes, though.
Quoted 8 lines
Quoted 8 lines
-- v --
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
End of included message
Signature · 5 lines
+--------------------------+------------------------------+ | Tim Walberg | [email protected] | | 830 Carriage Dr. | www.concentric.net/~twalberg | | Algonquin, IL 60102 | | +--------------------------+------------------------------+
Tim Walberg <[email protected]> writes:
|> I think that |> |> find / -name foo 2>&- |> |> should do the trick (under ksh, anyway, and |> probably zsh or bash as well).
This is different since the process now gets an error when trying to write to fd 2, and a good implementation with check for errors.
Andreas.
Signature · 4 lines
Andreas Schwab "And now for something [email protected] completely different." SuSE Labs, SuSE GmbH, Schanzäckerstr. 10, D-90443 Nürnberg Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
On Thu, Nov 01, 2001 at 11:51:39PM +0000, you [Riley Williams] claimed:
(Piping only stderr to a program)
Quoted 2 lines
Also, even if it's true, is that also true with all other possible shells?
I think the point is it can be made to work in userland, not that a particular shell isn't able to do that. In fact, I'm a bit dissapointed that shells such as zsh and bash seem to lack an easy way to do that. But really, this is theoretical, I think nobody is really advocating getting rid of /dev/null and /dev/zero.
Quoted 2 lines
Redirecting to
/dev/nullis independant of the shells, but piping hacks like that aren't.
The way I see it piping is independent from shells just because it can be accomplished in userland using the present linux system calls.
Quoted 2 lines
So it should be deliberately written to write them out in an infinite loop? Makes a bizarre sort of sense, but not something I would ever do.
Why is that? I see nothing bizarre in that.
Quoted 7 lines
Also, as I've had pointed out to me, one sometimes needs to tell a program to take input other than stdin from
/dev/zeroand that often can't be done using pipes. The friend who pointed this out to me recently had reason to do precicely this. The following isn't exactly what he needed, but is similar...Q> ebcdic2ascii <
/dev/ttyS1| tr A-Z a-z | bindiff/dev/zero/dev/stdin
Again, I think it can be done in userland. Some shells even give you convenient syntax for that. This works in zsh:
head -2 <(yes) <(uname)
==> /proc/self/fd/11 <==
y
y
==> /proc/self/fd/12 <==
Linux
So you can pipe arbitrary program output as a filename argument.
I guess you example could be written as
ebcdic2ascii < /dev/ttyS1 | tr A-Z a-z | bindiff <(zerofill) /dev/stdin
but I'm not sure since I have no idea your example does ;) ;).
Quoted 3 lines
Quoted 1 line
I'm still happy to keep
/dev/nulland/dev/zero. ;)So am I.
-- v --
On Wed, Oct 31, 2001 at 07:11:47PM -0500, you [Doug McNaught] claimed:
Quoted 7 lines
Riley Williams <[email protected]> writes:
The Bourne shell is more perverse than you realize:
$ exec 3>&1; find / -name "wanted-but-lost-download" 2>&1 1>&3 3>&- | eat[stolen from "Csh Programming Considered Harmful" by Tom Christiansen]
Wow. I actually played a minute with zsh, but didn't find a way... I was pretty sure, though, that it was doable.
Quoted 8 lines
Horrible, but does work. ;)
Quoted 3 lines
Quoted 1 line
zerofill | head -c 1440k >
/tmp/floppy.imgHow does zerofill know when to stop writing zeros out?
Easy, it gets EPIPE on the write (or gets killed by SIGPIPE if it's stupid).
Stupid... Or lazy ;).
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
ssh foo@bar | block
Which of my examples is this an equivalent to? I don't recognise it.
None; he's referring to the
/dev/blockexample that started the thread.
Yep.
Quoted 1 line
I'm still happy to keep
/dev/nulland/dev/zero. ;)
So am I. Perhaps it is better to let this thread die...
-- v --
Quoted 11 lines · Doug McNaught
Quoted 7 lines · Riley Williams
Are you sure?
Quoted 1 line
find / -name "wanted-but-lost-download" | eat
Doesn't work - you're piping the stdin there, not stderr as per my example above. AFAIK, there's no way to pipe stderr without also piping stdout, hence this sort of solution just doesn't work.
Quoted 7 lines
The Bourne shell is more perverse than you realize:
$ exec 3>&1; find / -name "wanted-but-lost-download" 2>&1 1>&3 3>&- | eat[stolen from "Csh Programming Considered Harmful" by Tom Christiansen]
Horrible, but does work. ;)
$ find / -name "wanted-but-lost-download" 2>&1 1>&0 | eat
is simpler although dependent on stdin being a tty
Signature · 8 lines
Abramo Bagnara mailto:[email protected] Opera Unica Phone: +39.546.656023 Via Emilia Interna, 140 48014 Castel Bolognese (RA) - Italy ALSA project http://www.alsa-project.org It sounds good!
On Wed, Oct 31, 2001 at 11:13:22PM +0000, you [Riley Williams] claimed:
Quoted 7 lines
Hi Ville.
Quoted 2 lines
Certainly have in the sense that you could theoretically do that in user space.
Are you sure?
In theory, yes.
Quoted 4 lines
Quoted 1 line
find / -name "wanted-but-lost-download" | eat
Doesn't work - you're piping the stdin there, not stderr as per my example above.
Sorry, I wasn't careful enough.
Quoted 2 lines
AFAIK, there's no way to pipe stderr without also piping stdout, hence this sort of solution just doesn't work.
One could argue that is a fault of the shell - which again is a userland thing.
If anything else fails, you could do
% touch y; rm -f x
% ls x y
ls: x: No such file or directory
y
% mkfifo f
% ls x y 2> f & wc -c f
y
33 f
rm f
Which of course isn't pretty, but it's doable. Of course, I'm not arguing that we should get rid of /dev/null and /dev/zero, but that in theory you could implement them in userspace.
Come to think of it, the biggest gain from /dev/null and /dev/zero comes propably when you do memmaps. I'm not actually sure whether you could all tath without /dev/null and /dev/zero - or you could, but with performance loss.
Quoted 1 line
AFAICS, there is no sane alternative to
/dev/nullin userspace.
Sane is relative...
Quoted 10 lines
Quoted 1 line
zerofill | head -c 1440k >
/tmp/floppy.imgHow does zerofill know when to stop writing zeros out? After all, if it doesn't write enough out for the head call, then it's no longer an equivalent to
/dev/zero, and it could easily be called with just about ANY positive number of bytes, including an infinite number, as in...zerofill | tr '\0' '@' > /dev/ttyS1...which sends an infinite stream of
0x40bytes to the serial port.
Of course it writes infinitely. When head terminates the pipe, it exits. Just try
yes | head -c 10
Or with any characters. It gets SIGPIPE when the other end closes the pipe.
Quoted 7 lines
However...
zerofill 750M >
/tmp/img.cd
zerofill 1440k >/tmp/img.floppy...would be a reasonable userspace equivalent to examples (2) and (3) respectively, so that certainly could be done in userspace.
That's equivalent to
zerofill | head -c 750M > /tmp/img.cd
Unless I missed something.
-- v --
Quoted 8 lines · Marko Rauhamaa
I noticed that I need a pseudodevice that opens normally but blocks all reads (and writes). The only way out would be through a signal. Neither
/dev/zeronor/dev/nullblock, but is there some other standard device that would do the job?If there isn't, writing such a pseudodevice would be trivial. What should it be called? Any chance of including that in the kernel?
/dev/never
Quoted 10 lines · Hugh Dickins
Quoted 7 lines · Marko Rauhamaa
I noticed that I need a pseudodevice that opens normally but blocks all reads (and writes). The only way out would be through a signal. Neither
/dev/zeronor/dev/nullblock, but is there some other standard device that would do the job?If there isn't, writing such a pseudodevice would be trivial. What should it be called? Any chance of including that in the kernel?
/dev/never
sorry, the bait was too obvious: /dev/microsoft
Signature · 3 lines
ElkOS: 12:01am up 6 days, 9:32, 3 users, load average: 2.54, 2.40, 2.27 bofhX: appears to be a Slow/Narrow SCSI-0 Interface problem
Quoted 7 lines · elko
Quoted 6 lines · Hugh Dickins
Quoted 5 lines · Marko Rauhamaa
I noticed that I need a pseudodevice that opens normally but blocks all reads (and writes). The only way out would be through a signal. Neither
/dev/zeronor/dev/nullblock, but is there some other standard device that would do the job?
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
If there isn't, writing such a pseudodevice would be trivial. What should it be called? Any chance of including that in the kernel?
/dev/neversorry, the bait was too obvious:
/dev/microsoft
No,
cat /dev/microsoft > /dev/never
;)