Skip to contentSkip to conversation

asus P5A-B psaux problem

DISCUSSION Duncan Sands 2 participants 2 messages Nov 4, 2001

lore
Share & tools
lore
#0 lore raw

Are you sure the mouse is not working? I also have a P5A-B, PS/2 mouse and 2.4 kernel (many versions). I also get no dmesg about PS/2. But the mouse works fine! Did you tell X windows that you are using a PS/2 mouse?

In XF86Config (xfree86 version 4):

Section "InputDevice"

        Identifier      "Default Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"   "/dev/misc/psaux" # something else for you?
        Option          "Protocol"   "PS/2"

EndSection

I hope this helps,

Duncan.

#1 lore raw
Quoted 14 lines · Duncan Sands

Are you sure the mouse is not working? I also have a P5A-B, PS/2 mouse and 2.4 kernel (many versions). I also get no dmesg about PS/2. But the mouse works fine! Did you tell X windows that you are using a PS/2 mouse?

In XF86Config (xfree86 version 4):

Section "InputDevice"

        Identifier      "Default Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"   "/dev/misc/psaux" # something else for you?
        Option          "Protocol"   "PS/2"
Quoted 5 lines

EndSection

I hope this helps,

Duncan.

Yes, definitely sure that X is configured correctly (it works fine when I boot with 2.2.19) I have also tried gpm, which works fine under 2.2, and under 2.4.8 tells me there is no such device or address, and under 2.4.13 and 2.4.13-ac7 locks my keyboard and doesn't work.

Thanks for the suggestion, though.

Mark Roach