Problem with i820 AGP patch
Your patch to add AGP support for i820 chipset doesn't work for me, if I load agpgart module with agp_try_unsupported=1 I get:
-
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: Trying generic Intel routines for device id: 2501
^^^^^^^^^^^^^
agpgart: AGP aperture is 256M @ 0xd0000000
-
That device id is different from the corresponding line in apg.h:174
#define PCI_DEVICE_ID_INTEL_820_0 0x2500
I tried to change that line in:
#define PCI_DEVICE_ID_INTEL_820_0 0x2501
And it worked! But I don't know why the id for your chip is different from mine...
My motherboard is an Asus P3C2000 with a P3 500 running kernel 2.4.14
I've also another problem (I think AGP related) with DRI/DRM ang XFree 4.1.0, but I'm still working on it.
If I try running some OpenGL app with more than 256Mb of RAM, the system hangs (need hard reset, no SysReq works). This happens with 2.4.13 and 2.4.14, before I hadn't tried since I had only 128Mb...)
Someone can please tell me if this problem has something to do with having a "Maximum main memory to use for agp memory" value grater than AGP aperture value ?
Regards,
Signature · 6 lines
------------------------------------------------------------ Daniele Venzano Senior member of the Linux User Group Genova, Italy (LUGGe) E-Mail: [email protected] Web: http://digilander.iol.it/webvenza/ LUGGe: http://lugge.ziobudda.net
I have a similar problem with i860 - using 2.4.15-pre4.
I get on a dell 530 dual p4 + radeon video:
Nov 14 00:31:40 flash kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Nov 14 00:31:40 flash kernel: agpgart: Maximum main memory to use
for agp memory: 816M
Nov 14 00:31:40 flash kernel: agpgart: Unsupported Intel chipset (device id: 2531),
you might want to try agp_try_unsupported=1. agp.h has 850 id as 2530 and 860 as 8532.
My 860 claims 2531 ... ...
Regards
Gene/
lspci -v:
00:00.0 Host bridge: Intel Corporation 82850 860 (Wombat) Chipset Host Bridge (MCH) (rev 04)
Subsystem: Dell Computer Corporation: Unknown device 00d8
Flags: bus master, fast devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff900000-ffafffff
Prefetchable memory behind bridge: f0000000-f7ffffff
00:02.0 PCI bridge: Intel Corporation 82860 860 (Wombat) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
etc.
Quoted 23 lines · Daniele Venzano
Your patch to add AGP support for i820 chipset doesn't work for me, if I load agpgart module with agp_try_unsupported=1 I get:
-
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: Trying generic Intel routines for device id: 2501^^^^^^^^^^^^^agpgart: AGP aperture is 256M @
0xd0000000
-That device id is different from the corresponding line in apg.h:174
#definePCI_DEVICE_ID_INTEL_820_00x2500I tried to change that line in:
#definePCI_DEVICE_ID_INTEL_820_00x2501And it worked! But I don't know why the id for your chip is different from mine...
My motherboard is an Asus P3C2000 with a P3 500 running kernel 2.4.14
I noticed this too with Tyan Thunder i860. Adding a new entry to agp.h, eg.
#ifndef PCI_DEVICE_ID_INTEL_860_DP_0
#define PCI_DEVICE_ID_INTEL_860_DP_0 0x2531
#endif
along with appropriate modifcations to agpgart_be.c:
{ PCI_DEVICE_ID_INTEL_860_DP_0,
PCI_VENDOR_ID_INTEL,
INTEL_I860,
"Intel",
"i860",
intel_860_setup },seems to work ok for me. On the other hand, the performance is pretty much the same as "agp_try_unsupported=1" :-). How does your /proc/interrupts look?
Signature · 6 lines
Marvin Justice Software Developer BOXX Technologies, Inc. www.boxxtech.com 512-235-6318 (V) 512-835-0434 (F)
Quoted 68 lines · On Thursday 15 November 2001 12:27 am, [email protected] wrote:
I have a similar problem with i860 - using 2.4.15-pre4.
I get on a dell 530 dual p4 + radeon video:
Nov 14 00:31:40 flash kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann Nov 14 00:31:40 flash kernel: agpgart: Maximum main memory to use for agp memory: 816M Nov 14 00:31:40 flash kernel: agpgart: Unsupported Intel chipset (deviceid: 2531), you might want to try agp_try_unsupported=1.
agp.h has 850 id as 2530 and 860 as 8532. My 860 claims 2531 ... ... Regards Gene/lspci -v:
00:00.0 Host bridge: Intel Corporation 82850 860 (Wombat) Chipset Host Bridge (MCH) (rev 04) Subsystem: Dell Computer Corporation: Unknown device 00d8
Flags: bus master, fast devsel, latency 0
Memory ate8000000(32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.000:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff900000-ffafffff
Prefetchable memory behind bridge: f0000000-f7ffffff00:02.0 PCI bridge: Intel Corporation 82860 860 (Wombat) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
etc.
Quoted 14 lines · Daniele Venzano
Your patch to add AGP support for i820 chipset doesn't work for me, if I load agpgart module with agp_try_unsupported=1 I get:
-
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: Trying generic Intel routines for device id: 2501^^^^^^^^^^^^^agpgart: AGP aperture is 256M @
0xd0000000
-That device id is different from the corresponding line in apg.h:174
#definePCI_DEVICE_ID_INTEL_820_00x2500Quoted 7 lines
I tried to change that line in:
#definePCI_DEVICE_ID_INTEL_820_00x2501And it worked! But I don't know why the id for your chip is different from mine...
My motherboard is an Asus P3C2000 with a P3 500 running kernel 2.4.14
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 10 lines · Daniele Venzano
Your patch to add AGP support for i820 chipset doesn't work for me, if I load agpgart module with agp_try_unsupported=1 I get:
-
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: Trying generic Intel routines for device id: 2501^^^^^^^^^^^^^agpgart: AGP aperture is 256M @
0xd0000000
-
Here is what I have in 'drivers/pci/pci.ids' :
2500 82820 820 (Camino) Chipset Host Bridge (MCH)
1043 801c P3C-2000 system chipset
2501 82820 820 (Camino) Chipset Host Bridge (MCH)
1043 801c P3C-2000 system chipset
250b 82820 820 (Camino) Chipset Host Bridge
250f 82820 820 (Camino) Chipset PCI to AGP BridgeSo I guess that 0x2500 and 0x2501 should be initialized in the same way, through the same routines. Unfortunately, I dont have such a machine to test... Can you send what 'lspci -ev' shows ?
Quoted 9 lines
That device id is different from the corresponding line in apg.h:174
#definePCI_DEVICE_ID_INTEL_820_00x2500I tried to change that line in:
#definePCI_DEVICE_ID_INTEL_820_00x2501And it worked! But I don't know why the id for your chip is different from mine...
It worked, but in which way ? Did you test X+OpenGL apps to see whether it did the trick ? The fact that the module loads itself is not always sufficient to say that it works (believe me :-)
Quoted 12 lines
My motherboard is an Asus P3C2000 with a P3 500 running kernel 2.4.14
I've also another problem (I think AGP related) with DRI/DRM ang XFree 4.1.0, but I'm still working on it.
If I try running some OpenGL app with more than 256Mb of RAM, the system hangs (need hard reset, no SysReq works). This happens with 2.4.13 and 2.4.14, before I hadn't tried since I had only 128Mb...)
Someone can please tell me if this problem has something to do with having a "Maximum main memory to use for agp memory" value grater than AGP aperture value ?
With your custom patch, or with the 'generic' stuff ?
Regards.
Signature · 2 lines
Nicolas Aspert Signal Processing Laboratory (LTS) Swiss Federal Institute of Technology (EPFL)
Marvin Justice wrote:
On the other hand, the performance is pretty much
Quoted 3 lines
the same as "agp_try_unsupported=1" :-). How does your
/proc/interruptslook?
This is not really surprising. If you look through 'agpgart_be.c', you can see that
only the initialization is different. All the rest goes through the same generic routines.
There are already too many of these initializations in the file... but I think that R. Love is working on a cleaner version.
Regards
Signature · 2 lines
Nicolas Aspert Signal Processing Laboratory (LTS) Swiss Federal Institute of Technology (EPFL)
Quoted 1 line · Nicolas Aspert
test... Can you send what 'lspci -ev' shows ?
Here it is, I think I should have thought before...
-ev didn't worked, I used -vn with a cut & paste for names (first line of each entry)
00:00.0 Host bridge: Intel Corporation 82820 820 (Camino) Chipset Host Bridge (MCH) (rev 03) 00:00.0 Class 0600: 8086:2501 (rev 03)
Subsystem: 1043:801c Flags: bus master, fast devsel, latency 0 Memory at d0000000 (32-bit, prefetchable) [size=256M] Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corporation 82820 820 (Camino) Chipset PCI to AGP Bridge (rev 03) (prog-if 00 [Normal decode]) 00:01.0 Class 0604: 8086:250f (rev 03)
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: cc000000-ccffffff
Prefetchable memory behind bridge: cdf00000-cfffffff
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode]) 00:1e.0 Class 0604: 8086:2418 (rev 02)
Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000c000-0000dfff Prefetchable memory behind bridge: cd000000-cdefffff
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) (prog-if 00 [VGA]) 01:00.0 Class 0300: 102b:0525 (rev 04)
Subsystem: 102b:0378 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at ce000000 (32-bit, prefetchable) [size=32M] Memory at cc800000 (32-bit, non-prefetchable) [size=16K] Memory at cc000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at cdff0000 [disabled] [size=64K] Capabilities: <available only to root>
Other entries are all related to non-interesting (I think) devices (IDE, SMBus, audio, etc.)
Quoted 3 lines
It worked, but in which way ? Did you test X+OpenGL apps to see whether it did the trick ? The fact that the module loads itself is not always sufficient to say that it works (believe me :-)
It loaded and glxgears worked correctly, I didn't tested other apps
Quoted 1 line
With your custom patch, or with the 'generic' stuff ?
Both (sigh!), the problem shows with or without your patch. Now I'm tring your new patch, but I don't think something will change.
Regards.
Signature · 6 lines
----------------------------------------------------- Daniele Venzano Senior member of the Linux User Group Genova (LUGGe) E-Mail: [email protected] Web: http://digilander.iol.it/webvenza/ LUGGe: http://lugge.ziobudda.net
Re: Problem with i820 AGP patch [SOLVED]
In reply to Daniele VenzanoQuoted 2 lines · Daniele Venzano
Both (sigh!), the problem shows with or without your patch. Now I'm tring your new patch, but I don't think something will change.
I was wrong, now (with 2.4.15-pre4 and Nicolas patch) everything is working fine, the module agpgart loads finding my i820 chipset and my OpenGL apps work correctly with more than 256Mb of RAM.
Thank you very much for your work.
Regards.
Signature · 6 lines
----------------------------------------------------- Daniele Venzano Senior member of the Linux User Group Genova (LUGGe) E-Mail: [email protected] Web: http://digilander.iol.it/webvenza/ LUGGe: http://lugge.ziobudda.net