Skip to contentSkip to conversation

Sometimes no lock on digivox miniII (Ver3.0)

DISCUSSION Andreas Witte 3 participants 3 messages Feb 17, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hello List,

after changing my system to newer hardware (and use the latest driver for af9015), it
seems the device didnt get a lock sometimes (mostly in the case the system is started up).
I use the stick together with mythtv. If i get the partial lock, i restart mythbackend or
switch channel - then i get the lock. If i get it just the first time the stick is working
fine for the whole day. Only the very first channelpick after system start seems to be the
problem.

I cant reproduce this at all. Sometimes it works, sometimes not. Anybody else seeing this?
Im on gentoo with 2.6.28 kernel.

Any Ideas?

Regards,
Andreas

#1 lore raw
Quoted 20 lines · Andreas Witte

Hello List,

after changing my system to newer hardware (and use the latest driver for af9015), it
seems the device didnt get a lock sometimes (mostly in the case the system is started up).
I use the stick together with mythtv. If i get the partial lock, i restart mythbackend or
switch channel - then i get the lock. If i get it just the first time the stick is working
fine for the whole day. Only the very first channelpick after system start seems to be the
problem.

I cant reproduce this at all. Sometimes it works, sometimes not. Anybody else seeing this?
Im on gentoo with 2.6.28 kernel.

Any Ideas?

Quoted 9 lines

Regards,
Andreas

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

I don't know anything about the af9015, what kind of device it is, what it is supposed to do, or who wrote the code, except that I just grepped the code for af9015, found it, and it is a USB device. So I am an outside observer. Here is my suspicion of what is wrong:

There was a rather nasty USB bug in 2.6.28 (no suffixes). It hit a lot of USB device drivers. The problem showed itself, pretty much, as you describe. I experienced it, too, with a couple of Gphoto camera drivers that I wrote which had been working ust fine for years and worked again just fine when I patched the kernel. So by extrapolation there is quite likely nothing wrong here, either. Probably, the best thing to do would be either to upgrade to 2.6.28.x or to downgrade to 2.6.27.x. If the problem goes away, good.

Theodore Kilgore

#2 lore raw

Am Mon, 16 Feb 2009 21:54:40 -0600 (CST)
schrieb [email protected]:

Quoted 48 lines · Andreas Witte
Quoted 21 lines

Hello List,

after changing my system to newer hardware (and use the latest driver for af9015), it
seems the device didnt get a lock sometimes (mostly in the case the system is started up).
I use the stick together with mythtv. If i get the partial lock, i restart mythbackend or
switch channel - then i get the lock. If i get it just the first time the stick is working
fine for the whole day. Only the very first channelpick after system start seems to be the
problem.

I cant reproduce this at all. Sometimes it works, sometimes not. Anybody else seeing this?
Im on gentoo with 2.6.28 kernel.

Any Ideas?

Quoted 9 lines

Regards,
Andreas

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

I don't know anything about the af9015, what kind of device it is, what it is supposed to do, or who wrote the code, except that I just grepped the code for af9015, found it, and it is a USB device. So I am an outside observer. Here is my suspicion of what is wrong:

There was a rather nasty USB bug in 2.6.28 (no suffixes). It hit a lot of USB device drivers. The problem showed itself, pretty much, as you describe. I experienced it, too, with a couple of Gphoto camera drivers that I wrote which had been working ust fine for years and worked again just fine when I patched the kernel. So by extrapolation there is quite likely nothing wrong here, either. Probably, the best thing to do would be either to upgrade to 2.6.28.x or to downgrade to 2.6.27.x. If the problem goes away, good.

Quoted 1 line

Theodore Kilgore

The bug occurs seldomly here, too. I'm using Ubuntu 8.10 with the Ubuntu flavour of 2.6.27, some weeks old v4l-dvb-tree, and MSI digivox II v3. I have to switch channels a couple of times to get a channel lock. Can't reproduce it, and it doesn't happend for some time. Possibly because of a v4l-dvb- or kernel- update.

Cheers,
Carsten