netconsole support on Cobalt systems... Anyone tried it?
Hi All,
I've been tinkering with my Qube2 tonight, seeing if I can get netconsole running. I'd like to get this running for two reasons:
(1) I've only got one null-modem cable, which usually is plugged into my Indigo2 Impact -- I'd like to leave it where it is if possible.
(2) I'd like to improve support for the Qube 2700, which lacks such interfaces.
I've looked around on the web, but haven't found a great deal of material that explains how one uses it. The best resource thus far has been the linux/documentation/network/netconsole.txt file, as well as a crash dump[1] from an AMD64, which shows netconsole in action.
I tried booting with [email protected]/eth0,[email protected]/ on the kernel command line, without success. The system continues to boot[2], but only outputting to the serial console.
Has anyone here, tried using netconsole on Cobalt hardware? Has anybody played with netconsole on _any_ hardware?
Regards,
Signature · 17 lines
____ _ Stuart Longland (a.k.a Redhatter) / _ \ ___ ___ __| |__ __ __ Gentoo Linux/MIPS Cobalt and Docs - (_) \ / \ ; \(__ __)/ \ / \ Developer \ // O _| / /\ \ | | | /\ | /\ | / / \ /__| / \ \ | | | \/ | \/ | (___/ \____/|_; |_| \_/ \__/ \__/ http://dev.gentoo.org/~redhatter Footnotes, 1. http://mjt.nysv.org/kernelbugfest/netconsole_panic_2.6.12.2 2. I was using my WinCE/MIPS-based[3] PDA, which happens to have a crippled version of "HyperTerminal". Unfortunately, it lacks any ability to capture the text... but otherwise, turns my PDA into a very convenient portable VT100. :-) 3. I'd like to get Linux working on this thing sometime... see my next post, which I'll write in a moment. :-)
Quoted 2 lines · Stuart Longland
Has anyone here, tried using netconsole on Cobalt hardware? Has anybody played with netconsole on _any_ hardware?
Contains an example of udp-console :
http://www.linux.it/~rubini/docs/sercons/sercons.html
--
-=AV=-
Quoted 3 lines · In message <[email protected]> you wrote:
I've been tinkering with my Qube2 tonight, seeing if I can get netconsole running. I'd like to get this running for two reasons:
...
Quoted 2 lines
I've looked around on the web, but haven't found a great deal of material that explains how one uses it. The best resource thus far has
See "doc/README.NetConsole" in the U-Boot source tree (ok, this is more about U-Boot's implementation but it also contains a few hints about the Linux part).
Quoted 2 lines
Has anyone here, tried using netconsole on Cobalt hardware? Has anybody played with netconsole on _any_ hardware?
We use netconsole for Linux in several projects (all PowerPC), usually in combination with netconsole in U-Boot.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] The rule on staying alive as a program manager is to give 'em a num- ber or give 'em a date, but never give 'em both at once.