Skip to contentSkip to conversation

Howto install bootloader using jtag?

DISCUSSION Nitesh Goyal 2 participants 2 messages Jan 30, 2003

lore
Share & tools
lore
#0 lore raw

Hi,
I'm using a IBM PPC 405GP board(from embeddedplanet) I accidently deleted the bootloader.

I have the bootloader srecord image on my host, but I do not know how to burn it on board using JTAG ?

Is there a utility available that I can use on host to download the bootloader image to tbe board ?

Thanks,
NItesh

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw

Depending on what JTAG debugger you're using, there should be a way to download and execute the S-Rec file (usually a .mot file). The bootloader file provided by Emdedded Planet is actually an executable that contains the boot loader image. You should be able to download and execute it in one simple step.

Mike Washburn
----- Original Message -----
From: "Nitesh Goyal" <[email protected]>
To: <[email protected]>
Sent: Wednesday, January 29, 2003 9:45 PM
Subject: Howto install bootloader using jtag?

Quoted 5 lines

Hi,
I'm using a IBM PPC 405GP board(from embeddedplanet) I accidently deleted the bootloader.

Quoted 11 lines

I have the bootloader srecord image on my host, but I do not know how to burn it on board using JTAG ?

Is there a utility available that I can use on host to download the bootloader image to tbe board ?

Thanks,
NItesh

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/