Skip to contentSkip to conversation

w83782d hangs during modprobe on Tyan

DISCUSSION Todd Harrington 2 participants 2 messages Dec 7, 2001 – Dec 10, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 37 lines

We are using a Tyan 2688 motherboard (WinBond w83782d). The problem that I am having is the lm_sensors package is hanging when I load the w83781d (modprobe w83781d) driver.

We are using the lm_sensors 2.6.2 and i2c 2.6.2. I have also tried the CVS version and have done:

modprobe i2c-piix4
modprobe w83781d init=0

I have also tried modprobe w83781d force_w83782d=0,0x29

The system still hangs.

I read on the linux-kernel mailing list a similar problem and it said there was a bug in the winbond driver but there was has been patch posted to bugtracker but the changes have not been integrated with CVS yet? Not sure if this related.

Hoping someone can help me!

Regards,

Todd Harrington
Trilogic Systems
Senior Systems Engineer
Tel - 978-658-3800 x-151
Fax - 978-657-5927
[email protected]
"Trilogic Systems:Providing you a full portfolio of design, integration, certification and support services."

#1 lore raw
Quoted 3 lines · Todd Harrington
Quoted 3 lines

We are using a Tyan 2688 motherboard (WinBond w83782d). The problem that I am having is the lm_sensors package is hanging when I load the w83781d (modprobe w83781d) driver.

http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=697

Do what it says at the bottom.

-Dan

Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]