RM9200 and at49bv642d

Hi all,

I'm new to u-boot and I want to use it on my new custom design RM9200 board. This is the first time we design a board based to an arm9 cpu.

I would like to know if this setup is already done or I should start customizing u-boot to get this work ?

My configuration is:

2 x SDRAM MT48LC16M16A2

1 x Flash AT49bv642D

I'm not 100% sure, but I think we based our desing on the AT91RM9200EK board for the memory interface. SO I would like to start with something that is the nearest of what I need.

I see some U-BOOT source based on the 1.2.0 but I'm not sure from what to start.

If someone can point me to the right direction ?

Regards

Jonathan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080117/1c538bc5/attachment.htm

________________________________

From: u-boot-users-bounces at lists.sourceforge.net
[mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Jonathan Dumaresq

	Sent: 17 January 2008 15:29
	To: u-boot-users at lists.sourceforge.net
	Subject: [U-Boot-Users] RM9200 and at49bv642d
	
	

	Hi all,


		If someone can point me to the right direction ?

http://www.denx.de/wiki/bin/view/DULG/Manual

esp

http://www.denx.de/wiki/view/DULG/UBootVersions

Then read the README file

Please dont post HTML on this list

Regards

Peter