Skip to contentSkip to conversation

Howto run Linux on ACER PICA 61

DISCUSSION Alexander Voropay 2 participants 4 messages Jun 22, 2004 – Jul 20, 2004 MIPS

lore
Share & tools
lore
#0 lore raw

Hi!

I've just got (for free :) an ancient MIPS ACER PICA 61 motherboard.

Can anyone help/guide me to run Linux-MIPS on this machine ?
Is it still possible to run Linux on this architecture ?

The motherboard is old (~1993) and it is very difficult to find
any documentations... AFAIK, this is version of ARC MIPS. (mipsel)

This is Full-size AT board, AT power supply, 5 ISA slots, 8 SIMM
slots. The CPU is PACEMIPS R4000-50Mhz (x2=100 internal ???) by Performance Semiconductor Corp.. NatSemi Ethernet/AUI onboard. No IDE connector. One additional slot is not ISA, but maked as IO an contains SCSI/Floppy/Serial/Perallel/Mice card. Another slot is like reversed EISA (double) and marked as VIO (locabus video?). Unfortunately, the original videocard is lost. :( However it works fine with old CirrusLogic VGA card in ISA slot (old ISA Trident 8900/9000 does not works).

St.Petersburg, Russia
--
-=AV=-

#1 lore raw
Quoted 10 lines · Alexander Voropay

I've just got (for free :) an ancient MIPS ACER PICA 61 motherboard.

Can anyone help/guide me to run Linux-MIPS on this machine ?
Is it still possible to run Linux on this architecture ?

The motherboard is old (~1993) and it is very difficult to find
any documentations... AFAIK, this is version of ARC MIPS. (mipsel)

Quoted 7 lines

This is Full-size AT board, AT power supply, 5 ISA slots, 8 SIMM
slots. The CPU is PACEMIPS R4000-50Mhz (x2=100 internal ???) by Performance Semiconductor Corp.. NatSemi Ethernet/AUI onboard. No IDE connector. One additional slot is not ISA, but maked as IO an contains SCSI/Floppy/Serial/Perallel/Mice card. Another slot is like reversed EISA (double) and marked as VIO (locabus video?). Unfortunately, the original videocard is lost. :(

Great. Because that was a S3 968 video card which for it's time was delivering quite a nice performance.

Quoted 2 lines

However it works fine with old CirrusLogic VGA card in ISA slot (old ISA Trident 8900/9000 does not works).

Linux has code for this system but it's suffering from severe bitrot. I still have the documents here so I could help you a bit if you were willing to resurrect the kernel - which should be relativly easy, also due to the system's similarity to another, somewhat better supported system, the Olivetti M700-10.

Ralf

#2 lore raw

Hi!

Quoted 2 lines

Linux has code for this system but it's suffering from severe bitrot. I still have the documents here so I could help you a bit if you were

willing to

Quoted 3 lines

resurrect the kernel - which should be relativly easy, also due to the system's similarity to another, somewhat better supported system, the Olivetti M700-10.

I'm trying to cross-compile a kernel from the linux-mips CVS.

Unfortunately, the build script does not provide a selection for the
SCSI driver for the ACER PICA (/linux/drivers/scsi/NCR53C9x.h ??) and SONIC DP83932 Ethernet controller.

--
-=AV=-

#3 lore raw

Hi!

Quoted 1 line

Unfortunately, the build script does not provide a selection for the

SCSI driver for

Quoted 1 line

the ACER PICA

It seems, this is a typo in Kconfigs... The JAZZ machine name is a
"MACH_JAZZ",
not a "MIPS_JAZZ"

[root@monitor linux]# find . -name "Kconfig" | xargs grep MIPS_JAZZ ./drivers/net/Kconfig:config MIPS_JAZZ_SONIC ./drivers/net/Kconfig: depends on NET_ETHERNET && MIPS_JAZZ ./drivers/scsi/Kconfig: depends on MIPS_JAZZ && SCSI ./linux/drivers/net/Kconfig:config MIPS_JAZZ_SONIC
./linux/drivers/net/Kconfig: depends on NET_ETHERNET && MIPS_JAZZ
./linux/drivers/scsi/Kconfig: depends on MIPS_JAZZ && SCSI

--
-=AV=-