u-boot debug and flash
I'm a newbie to u-boot, I'm working on Adder87x board and have a P&E BDM cable to parelle port, Anybody can tell me how can I write u-boot to the target board via BDM interface and how can I debug? Thank you very much!
Regards,
Jia Jianwei
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040825/29f9fe7a/attachment.htm
Quoted 5 lines · In message <[email protected]> you wrote:
I'm a newbie to u-boot, I'm working on Adder87x board and have a P&E
BDM cable to parelle port, Anybody can tell me how can I write u-boot to
the target board via BDM interface and how can I debug? Thank you
very much!
Maybe you should ask P&E support, if you bought their products. This is actually off topic here.
Quoted 6 lines
Content-Type: text/html; charset="gb2312"Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD>
And NEVER post HTML to this list, please!!!
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
There is is no reason for any individual to have a computer in their
home. -- Ken Olsen (President of Digital Equipment Corporation),
Convention of the World Future Society, in Boston, 1977