dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys
Subsystems (4)
Frank Li
maintainerPATCH 1/1 dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)
--- Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml | 4 ++++ 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml +4 -0
@@ -38,6 +38,10 @@ properties: managed: true + phys: + description: A reference to the SerDes lane(s) + maxItems: 1 + required: - reg
Signature · 1 line
2.34.1
Quoted 14 lines · Frank Li
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)Signed-off-by Frank Li <[email protected]>--- Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml | 4 ++++ 1 file changed, 4 insertions(+)Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml +0
-0
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml properties: · line 42
Quoted 5 lines
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml +2
-0@@ -38,6 +38,10 @@ properties: managed: true + phys: + description: A reference to the SerDes lane(s)
This is not the same phy as phy-handle points to?
Best regards,
Krzysztof
Frank Li
maintainerQuoted 16 lines · Krzysztof Kozlowski
Quoted 15 lines · Frank Li
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)Signed-off-by Frank Li <[email protected]>--- Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml | 4 ++++ 1 file changed, 4 insertions(+)Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml +0
-0@@ -38,6 +38,10 @@ properties:
Quoted 6 lines
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml properties: · line 42
Quoted 4 lines
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml +2
-0managed: true + phys: + description: A reference to the SerDes lane(s)This is not the same phy as phy-handle points to?
I go through source code and dts, it is not the same. phys connect to chip internal serdas phys. phy-handle points to external ethernet phy, which is connected by mdio bus generally.
Frank
Quoted 4 lines
Best regards,
Krzysztof
Quoted 6 lines · Frank Li
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)Signed-off-by Frank Li <[email protected]>---
Best regards,
Krzysztof
This patch was applied to netdev/net.git (main) by David S. Miller <[email protected]>:
Hello:
This patch was applied to netdev/net.git (main)
by David S. Miller <[email protected]>:
Quoted 8 lines · On Fri, 9 Aug 2024 16:06:53 -0400 you wrote:
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)Signed-off-by Frank Li <[email protected]>--- Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml | 4 ++++ 1 file changed, 4 insertions(+)
Here is the summary with links:
- [1/1] dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys
https://git.kernel.org/netdev/net/c/c25504a0ba36
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html