OMAP3: CORE Off support

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Rajendra Nayak
Sent: Friday, September 26, 2008 5:50 PM
To: [email protected]
Cc: 'Kevin Hilman'
Subject: [PATCH 14/16] OMAP3: CORE Off support

This patch updates omap_sram_idle with CORE OFF support

Signed-off-by Rajendra Nayak <[email protected]>

---
 arch/arm/mach-omap2/pm34xx.c |   79 
+++++++++++++++++++++++++++++++++++++++++--
 1 files changed, 77 insertions(+), 2 deletions(-)

Index: linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/pm34xx.c

2008-09-26 16:38:37.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c	
2008-09-26 16:39:18.000000000 +0530

arch/arm/mach-omap2/pm34xx.c +35 -0

@@ -7,6 +7,9 @@
  * Tony Lindgren <[email protected]>
  * Jouni Hogander
  *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Rajendra Nayak <[email protected]>
+ *
  * Copyright (C) 2005 Texas Instruments, Inc.
  * Richard Woodruff <[email protected]>
  *

@@ -27,11 +30,15 @@
 #include <mach/gpio.h>
 #include <mach/sram.h>
 #include <mach/pm.h>
+#include <mach/prcm.h>
 #include <mach/clockdomain.h>
 #include <mach/powerdomain.h>
 #include <mach/common.h>
 #include <mach/control.h>
+#include <mach/serial.h>
+#include <mach/gpio.h>
 #include <mach/sdrc.h>
+#include <mach/gpmc.h>
 #include <asm/tlbflush.h>
 
 #include "cm.h"

@@ -59,6 +66,46 @@ static struct powerdomain *mpu_pwrdm, *n
 static struct powerdomain *core_pwrdm, *per_pwrdm;
 
 int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
+void omap3_sram_restore_context(void);
+
+void omap3_per_save_context(void)
+{
+	omap3_gpio_save_context();
+}
+
+void omap3_per_restore_context(void)
+{
+	omap3_gpio_restore_context();
+}
+
+void omap3_core_save_context(void)
+{
+	u32 control_padconf_off;
+	/* Save the padconf registers */
+	control_padconf_off =
+	omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
+	control_padconf_off |= START_PADCONF_SAVE;
+	omap_ctrl_writel(control_padconf_off, 
 OMAP343X_CONTROL_PADCONF_OFF);
+	/* wait for the save to complete */
+	while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+			& PADCONF_SAVE_DONE);
+	/* Save the Interrupt controller context */
+	omap3_intc_save_context();
+	/* Save the GPMC context */
+	omap3_gpmc_save_context();
+	/* Save the system control module context, padconf 

already save above*/

arch/arm/mach-omap2/pm34xx.c +6 -0

+	omap3_control_save_context();
+}
+
+void omap3_core_restore_context(void)
+{
+	/* Restore the control module context, padconf restored 

by h/w */

arch/arm/mach-omap2/pm34xx.c +35 -2

+	omap3_control_restore_context();
+	/* Restore the GPMC context */
+	omap3_gpmc_restore_context();
+	/* Restore the interrupt controller context */
+	omap3_intc_restore_context();
+}
 
 /* PRCM Interrupt Handler for wakeups */
 static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)

@@ -191,6 +238,7 @@ static void omap_sram_idle(void)
 	int mpu_next_state = PWRDM_POWER_ON;
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
+	int core_prev_state, per_prev_state;
 
 	if (!_omap_sram_idle)
 		return;

@@ -232,8 +280,19 @@ static void omap_sram_idle(void)
 		/* PER changes only with core */
 		per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 		if (clocks_off_while_idle) {
-			if (per_next_state < PWRDM_POWER_ON)
+			if (per_next_state < PWRDM_POWER_ON) {
+				if (per_next_state == PWRDM_POWER_OFF) {
+					omap3_per_save_context();
+					omap3_uart_save_context(2);
+				}
 				omap_serial_enable_clocks(0, 2);
+			}
+			if (core_next_state == PWRDM_POWER_OFF) {
+				omap3_core_save_context();
+				omap3_prcm_save_context();
+				omap3_uart_save_context(0);
+				omap3_uart_save_context(1);
+			}
 			omap_serial_enable_clocks(0, 0);
 			omap_serial_enable_clocks(0, 1);
 		}

@@ -258,8 +317,23 @@ static void omap_sram_idle(void)
 		if (clocks_off_while_idle) {
 			omap_serial_enable_clocks(1, 0);
 			omap_serial_enable_clocks(1, 1);
-			if (per_next_state < PWRDM_POWER_ON)
+			core_prev_state = 
 pwrdm_read_prev_pwrst(core_pwrdm);
+			if (core_prev_state == PWRDM_POWER_OFF) {
+				omap3_core_restore_context();
+				omap3_prcm_restore_context();
+				omap3_sram_restore_context();
+				omap3_uart_restore_context(0);
+				omap3_uart_restore_context(1);
+			}
+			if (per_next_state < PWRDM_POWER_ON) {
 				omap_serial_enable_clocks(1, 2);
+				per_prev_state =
+					
 pwrdm_read_prev_pwrst(per_pwrdm);
+				if (per_prev_state == PWRDM_POWER_OFF) {
+					omap3_per_restore_context();
+					omap3_uart_restore_context(2);
+				}
+			}
 		}

arch/arm/mach-omap2/pm34xx.c +1 -1

 		omap2_gpio_resume_after_retention();
 	}

@@ -648,6 +722,7 @@ int __init omap3_pm_init(void)
 	/* XXX prcm_setup_regs needs to be before enabling hw
 	 * supervised mode for powerdomains */
 	prcm_setup_regs();
+	omap3_save_scratchpad_contents();
 
 	ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
 			  (irq_handler_t)prcm_interrupt_handler,
 
--

To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html