EV-64260-BP & GT64260 bi_recs
Quoted 1 line · Mark A. Greer
Okay, this may be it, attempt #4:
Looks fine, except for:
Quoted 1 line
[6]
0x00000000(NULL Termination of whole list)
Currently the entire bi_recs list starts with BI_FIRST (that's how we detect a bi_recs list) and ends with BI_LAST (that's the terminator). We must maintain compatibility.
MS
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 11 lines · Michael Sokolov
Quoted 1 line · Mark A. Greer
Okay, this may be it, attempt #4:
Looks fine, except for:
Quoted 1 line
[6]
0x00000000(NULL Termination of whole list)Currently the entire
bi_recslist starts withBI_FIRST(that's how we detect abi_recslist) and ends withBI_LAST(that's the terminator). We must maintain compatibility.
Yeah, that's right, I messed up. So what should be done for the nested ones? What is we use the BI_DEVICE as a quasi-BI_FIRST and then add a BI_LAST to each nested one? This is what it would look like:
Example for ev64260:
--------------------
[0] tag: BI_FIRST
size: 4
data: 0x00000000 (don't care)[1] tag: BI_CMD_LINE
size: 36 (4 + 4 + 26 chars + 2 pad)
data: "console=ttyS0,115200 ip=on"
pad: 2[2] tag: BI_MEMSIZE
size: 12
data: 0x33554432 (32 MB)[3] tag: BI_GT64260_BASE
size: 12
data: 0xfc000000[4] tag: BI_DEVICE (embedded enet cltr 0)
size: 60 (8 + 2*12 + 16 + 12 == 60)
[4.0] tag: BI_DEV_TYPE
size: 12
data: BI_DEV_TYPE_GT_ETH
[4.1] tag: BI_DEV_ID
size: 12
data: 0x00000000 (1st enet device)
[4.2] tag: BI_MAC_ADDR
size: 16
data: 0xaabbccddeeff (6 byte MAC addr)
pad: 2
[4.3] tag: BI_LAST
size: 4
data: 0x00000000 (don't care)[5] tag: BI_DEVICE (embedded enet cltr 1)
size: 60 (8 + 2*12 + 16 + 12 == 60)
[5.0] tag: BI_DEV_TYPE
size: 12
data: BI_DEV_TYPE_GT_ETH
[5.1] tag: BI_DEV_ID
size: 12
data: 0x00000001 (2nd enet device)
[5.2] tag: BI_MAC_ADDR
size: 16
data: 0xgghhiijjkkll (6 byte MAC addr)
pad: 2
[5.3] tag: BI_LAST
size: 4
data: 0x00000000 (don't care)[6] tag: BI_DEVICE (embedded enet cltr 2)
size: 60 (8 + 2*12 + 16 + 12 == 60)
[6.0] tag: BI_DEV_TYPE
size: 12
data: BI_DEV_TYPE_GT_ETH
[6.1] tag: BI_DEV_ID
size: 12
data: 0x00000002 (3rd enet device)
[6.2] tag: BI_MAC_ADDR
size: 16
data: 0xmmnnooppqqrr (6 byte MAC addr)
pad: 2
[6.3] tag: BI_LAST
size: 4
data: 0x00000000 (don't care)[7] tag: BI_LAST
size: 4
data: 0x00000000 (don't care)** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 3 lines · Mark A. Greer
Yeah, that's right, I messed up. So what should be done for the nested ones? What is we use the
BI_DEVICEas a quasi-BI_FIRST and then add aBI_LASTto each nested one? This is what it would look like:
I messed up the size on the BI_LAST struct, should be 12. Attempt #5:
Example for ev64260:
--------------------
[0] tag: BI_FIRST
size: 12
data: 0x00000000 (don't care)[1] tag: BI_CMD_LINE
size: 36 (4 + 4 + 26 chars + 2 pad)
data: "console=ttyS0,115200 ip=on"
pad: 2[2] tag: BI_MEMSIZE
size: 12
data: 0x33554432 (32 MB)[3] tag: BI_GT64260_BASE
size: 12
data: 0xfc000000[4] tag: BI_DEVICE (embedded enet cltr 0)
size: 60 (8 + 2*12 + 16 + 12 == 60)
[4.0] tag: BI_DEV_TYPE
size: 12
data: BI_DEV_TYPE_GT_ETH
[4.1] tag: BI_DEV_ID
size: 12
data: 0x00000000 (1st enet device)
[4.2] tag: BI_MAC_ADDR
size: 16
data: 0xaabbccddeeff (6 byte MAC addr)
pad: 2
[4.3] tag: BI_LAST
size: 12
data: 0x00000000 (don't care)[5] tag: BI_DEVICE (embedded enet cltr 1)
size: 60 (8 + 2*12 + 16 + 12 == 60)
[5.0] tag: BI_DEV_TYPE
size: 12
data: BI_DEV_TYPE_GT_ETH
[5.1] tag: BI_DEV_ID
size: 12
data: 0x00000001 (2nd enet device)
[5.2] tag: BI_MAC_ADDR
size: 16
data: 0xgghhiijjkkll (6 byte MAC addr)
pad: 2
[5.3] tag: BI_LAST
size: 12
data: 0x00000000 (don't care)[6] tag: BI_DEVICE (embedded enet cltr 2)
size: 60 (8 + 2*12 + 16 + 12 == 60)
[6.0] tag: BI_DEV_TYPE
size: 12
data: BI_DEV_TYPE_GT_ETH
[6.1] tag: BI_DEV_ID
size: 12
data: 0x00000002 (3rd enet device)
[6.2] tag: BI_MAC_ADDR
size: 16
data: 0xmmnnooppqqrr (6 byte MAC addr)
pad: 2
[6.3] tag: BI_LAST
size: 12
data: 0x00000000 (don't care)[7] tag: BI_LAST
size: 12
data: 0x00000000 (don't care)** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 5 lines
Yeah, that's right, I messed up. So what should be done for the nested ones? What is we use the
BI_DEVICEas a quasi-BI_FIRST and then add aBI_LASTto each
nested one? This is what it would look like:
Any reason why BI_LAST has those 4 bytes of data set to 0, why not just BI_LAST size=0 and no data ?
Ben.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 2 lines · [email protected] wrote:
Any reason why
BI_LASThas those 4 bytes of data set to 0, why not justBI_LASTsize=0 and no data ?
Only reason is that it is how its implemented now so to keep backward compatibility...
E.g., _2_4_devel, arch/ppc/boot/common/misc-simple.c:decompress_kernel()
rec->tag = BI_LAST;
rec->size = sizeof(struct bi_record);
rec = (struct bi_record *)((unsigned long)rec + rec->size);Mark
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 5 lines · Mark A. Greer
Quoted 2 lines · [email protected] wrote:
Any reason why
BI_LASThas those 4 bytes of data set to 0, why not justBI_LASTsize=0 and no data ?
Quoted 8 lines
Only reason is that it is how its implemented now so to keep backward compatibility...
E.g.,
_2_4_devel, arch/ppc/boot/common/misc-simple.c:decompress_kernel()rec->tag = BI_LAST; rec->size = sizeof(struct bi_record); rec = (struct bi_record *)((unsigned long)rec + rec->size);
Ahh shit, I was thinking bi_rec had data[1], not data[0].
Attempt #6:
[0] tag: BI_FIRST
size: 8
[1] tag: BI_CMD_LINE
size: 36 (4 + 4 + 26 chars + 2 pad)
data: "console=ttyS0,115200 ip=on"
pad: 2[2] tag: BI_MEMSIZE
size: 12
data: 0x33554432 (32 MB)[3] tag: BI_GT64260_BASE
size: 12
data: 0xfc000000[4] tag: BI_DEVICE (embedded enet cltr 0)
size: 56 (8 + 2*12 + 16 + 8 == 56)
[4.0] tag: BI_DEV_TYPE
size: 12
data: BI_DEV_TYPE_GT_ETH
[4.1] tag: BI_DEV_ID
size: 12
data: 0x00000000 (1st enet device)
[4.2] tag: BI_MAC_ADDR
size: 16
data: 0xaabbccddeeff (6 byte MAC addr)
pad: 2
[4.3] tag: BI_LAST
size: 8[5] tag: BI_DEVICE (embedded enet cltr 1)
size: 56 (8 + 2*12 + 16 + 8 == 56)
[5.0] tag: BI_DEV_TYPE
size: 12
data: BI_DEV_TYPE_GT_ETH
[5.1] tag: BI_DEV_ID
size: 12
data: 0x00000001 (2nd enet device)
[5.2] tag: BI_MAC_ADDR
size: 16
data: 0xgghhiijjkkll (6 byte MAC addr)
pad: 2
[5.3] tag: BI_LAST
size: 8
[6] tag: BI_DEVICE (embedded enet cltr 2)
size: 56 (8 + 2*12 + 16 + 8 == 56)
[6.0] tag: BI_DEV_TYPE
size: 12
data: BI_DEV_TYPE_GT_ETH
[6.1] tag: BI_DEV_ID
size: 12
data: 0x00000002 (3rd enet device)
[6.2] tag: BI_MAC_ADDR
size: 16
data: 0xmmnnooppqqrr (6 byte MAC addr)
pad: 2
[6.3] tag: BI_LAST
size: 8[7] tag: BI_LAST
size: 8
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/