conntrack/NAT module
Hi,Harald
Thanks for your answers.
I am afraid that the conntrack module for DNAT is not correct now.my
purpose of the two module is to achieve the rule which is "iptables -A PREROUTING -t nat -p udp -d 159.226.1.1 --dport 5001 -j DNAT --to 192.168.1.2:8888".
The code of conntrack module is as follows:
static int foo_help(const struct iphdr *iph, size_t len,
struct ip_conntrack *ct, enum ip_conntrack_info ctinfo)
{
struct ip_conntrack_tuple t,mask;
t = ((struct ip_conntrack_tuple)
{ { 0, { 0 } },
{ 0x0101e29f, { htons(5001) }, IPPROTO_UDP }}); //
proto=17,dst=159.226.1.1,dport=5001
mask = ((struct ip_conntrack_tuple)
{ { 0, { 0 } },
{ 0xFFFFFFFF, { 0xFFFF }, 0xFFFF }});
ip_conntrack_expect_related(ct, &t, &mask, NULL);
return NF_ACCEPT;
}
static struct ip_conntrack_helper foo = { { NULL, NULL },
{ { 0, { 0 } },
{ 0x0101e29f, { 0 }, IPPROTO_UDP } },
{ { 0, { 0 } },
{ 0xFFFFFFFF, { 0 }, 0xFFFF } },
foo_help }; // proto=17,dst=159.226.1.1int init_module(void)
{
return ip_conntrack_helper_register(&foo);
}
void cleanup_module(void)
{
ip_conntrack_helper_unregister(&foo);
} After insmod the conntrack module and receiving udp packges sended to
159.226.1.1,I can see "EXPECTING: proto=17 src=0.0.0.0 dst=159.226.1.1 sport=0 dport=5001"in /proc/net/ip_conntrack.I don't know if my conntrack for DNAT is correct?
The code of my nat module is as follows:
static int foo_nat_expected(struct sk_buff **pksb,
unsigned int hooknum, struct ip_conntrack *ct, struct ip_nat_info *info, struct ip_conntrack *master, struct ip_nat_info *masterinfo, unsigned int *verdict)
{
struct ip_nat_multi_range mr;
u_int32_t newdstip;
if (HOOK2MANIP(hooknum)==IP_NAT_MANIP_DST){
newdstip = 0x0201a8c0; //192.168.1.2
mr.rangesize=1;
mr.range[0].flags |= IP_NAT_RANGE_PROTO_SPECIFIED;
mr.range[0].min = mr.range[0].max = ((union ip_conntrack_manip_proto)
{ htons(8888) }); // forward
159.226.1.1:5001 to 192.168.1.2:8888,correct?
*verdict = ip_nat_setup_info(ct, &mr, hooknum);
printk("########### foo_nat_expected finished #############\n");
return 1;
}}
static unsigned int foo_help(struct ip_conntrack *ct,
struct ip_nat_info *info, enum ip_conntrack_info ctinfo, unsigned int hooknum,
struct sk_buff **pksb)
{
return NF_ACCEPT; // I don't know what I can do here
}
static struct ip_nat_expect foo_expect = { { NULL, NULL }, foo_nat_expected
};
static struct ip_nat_helper hlpr = { { NULL, NULL },
{ { 0, { 0 } },
{ 0x09050a0a, { 0 }, IPPROTO_UDP } },
{ { 0, { 0xFFFF } },
{ 0xFFFFFFFF, { 0 }, 0xFFFF } },
foo_help , "test" };int init_module(void)
{
int ret;
if ((ret=ip_nat_expect_register(&foo_expect))==0){
ret=ip_nat_helper_register(&hlpr);
if (ret!=0)
ip_nat_expect_unregister(&foo_expect);
}
return ret;
}void cleanup_module(void)
{
ip_nat_helper_unregister(&hlpr);
ip_nat_expect_unregister(&foo_expect);
} After the 159.226.1.1 received udp package to 5001 port, I can see the
"########### foo_nat_expected finished #############"imformation for each package.But there is no DNAT happened.I copy the code from ip_conntrack_ftp.c and ip_nat_ftp.c. where I made the mistake?
Thanks
luoqiang
____________________________________________________________________________
Quoted 7 lines
Hi,all
Sorry to resend this mail,last mail is not can be seen.
I am writing a DNAT module to achieve the purpose which is identical to
"iptables -A PREROUTING -t nat -p udp -d 159.226.1.1 --dport 5000 -j DNAT
--to 192.168.1.2:5000".
host A----------------------------->host B-------------------->host C
159.226.1.2--------------->159.226.1.1/192.168.1.1--------------->192.168.1.2
Quoted 8 lines
I have read the hacking howto and have finished the conntrack module,which can be seen in "proc/net/ip_conntrack"
file of host B as"EXPECTING : proto=17 src=0 dst=159.226.1.1 sport=0 dport=5000"
But something wrong in my nat module.
After loaded the module, no DNAT happened. :-(
there are some questions I don't understand.
1.what's the function offoo_helpin struct ip_nat_helper?I do nothing here.
to mangle (nat) the payload of the master connection (i.e. if it contains an internal IP address sent by the client behind SNAT to the server).
Quoted 1 line
2. what's the function of struct
ip_nat_multi_rangehere?what's the
function
Quoted 1 line
of struct
ip_nat_rangerange[0] and structip_nat_rangerange[1]?(I
don't
Quoted 1 line
know what's the meaning of " hangs off end. ")
hangs off end == after the end of the structure
Quoted 1 line
3.how to configure the struct
ip_nat_multi_rangewhen do DNAT?
look at line 81... of ip_nat_ftp.c
Quoted 1 line
4.if I want to close the port after open it in a module,how I can do?
how do you open a port in a module? everything you do is creating conntrack entries and NAT bindings.
Quoted 9 lines
my code is here:
......
static int foo_nat_expected(structsk_buff**pksb,if (HOOK2MANIP(hooknum)==IP_NAT_MANIP_DST){ mr.rangesize=1; mr.range[0].flags = IP_NAT_RANGE_PROTO_SPECIFIED; // I don't knowwhat's the meaning here
PROTO_SPECIFIED == NAT of port
IP == NAT of IP address
please look more detailed at the other available examples.
Quoted 1 line
luoqiang
Quoted 7 lines · luoqiang
Hi,Harald
Thanks for your answers.
I am afraid that the conntrack module for DNAT is not correct now.my
purpose of the two module is to achieve the rule which is "iptables -A PREROUTING -t nat -p udp -d 159.226.1.1 --dport 5001 -j DNAT --to 192.168.1.2:8888".
well. from having a short view at your code, i'm unable to determine the reason of it's malfunction.
it might be worth trying to see what verdict ip_nat_setup_info is actually returning, since that particular (hardcoded) ip_address / portnumber range could be already in use.
Another issue could be endianness...
Quoted 1 line
Quoted 1 line
luoqiang
Signature · 5 lines
Live long and prosper - Harald Welte / [email protected] http://www.gnumonks.org/ ============================================================================ GCS/E/IT d- s-: a-- C+++ UL++++$ P+++ L++++$ E--- W- N++ o? K- w--- O- M- V-- PS+ PE-- Y+ PGP++ t++ 5-- !X !R tv-- b+++ DI? !D G+ e* h+ r% y+(*)