ICH5 with 2.6.1 very slow
today since one of my mirrored harddisk (/dev/hda) failed, I removed it from md-raid1 and now /dev/hdc becomes /dev/hda
hdparm -t /dev/hda gets me ~37MB/s now (before: /dev/hda - 30MB/s, /dev/hdc - 37MB/s)
maybe there's problem with /dev/hda so it's relatively slower!
However, the result still much slower than kernel 2.4.20 (55MB/s)
Kyle
Quoted 9 lines · Kyle
today since one of my mirrored harddisk (
/dev/hda) failed, I removed it from md-raid1 and now/dev/hdcbecomes/dev/hdahdparm -t
/dev/hdagets me ~37MB/s now (before:/dev/hda- 30MB/s,/dev/hdc- 37MB/s)maybe there's problem with
/dev/hdaso it's relatively slower!However, the result still much slower than kernel 2.4.20 (55MB/s)
Please fill bugzilla entry (htp://bugzilla.kernel.org)
and attach 'dmesg' and 'lspci -vvv -xxx' outputs for 2.4.20 and 2.6.x.
It would be also helpful to narrow down the issue to kernel version when this slowdown started (2.4.20 -> 2.6.x means too much changes to anybody sane to even start thinking about going through all of them).
--bart
Quoted 9 lines · Bartlomiej Zolnierkiewicz
Quoted 8 lines · Kyle
today since one of my mirrored harddisk (
/dev/hda) failed, I removed it from md-raid1 and now/dev/hdcbecomes/dev/hdahdparm -t
/dev/hdagets me ~37MB/s now (before:/dev/hda- 30MB/s,/dev/hdc- 37MB/s)maybe there's problem with
/dev/hdaso it's relatively slower!
Quoted 9 lines
Quoted 1 line
However, the result still much slower than kernel 2.4.20 (55MB/s)
Please fill bugzilla entry (htp://bugzilla.kernel.org)
and attach 'dmesg' and 'lspci -vvv -xxx' outputs for 2.4.20 and 2.6.x.It would be also helpful to narrow down the issue to kernel version when this slowdown started (2.4.20 -> 2.6.x means too much changes to anybody sane to even start thinking about going through all of them).
Also a hdparm -i /dev/hda might help I guess (as the small default read-ahead causes this for many users)
Signature · 1 line
Martin Schlemmer
Today I tried "lspci -vvv -xxx" with 2.6.1, forgotten to do this with 2.4.20, and I found this:
00:1f.1 IDE interface: Intel Corp. 82801EB ICH5 IDE (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 4c43
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 7f800000 (32-bit, non-prefetchable) [size=1K]
00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corp.: Unknown device 4c43
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d800 [size=16]00:1d.2 USB Controller: Intel Corp. 82801EB USB (Hub #3) (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4c43
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
[root@s1 kyle]# hdparm -i /dev/hda
/dev/hda:
Model=WDC WD2500JB-00EVA0, FwRev=15.05R15, SerialNo=WD-WMAEH1328328 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 1 2 3 4 5 6
Does it means that ICH5 shared IRQ 18 with USB and cause the performance problem?
I'll try to submit this to bugzilla.
Kyle