i.MXRT10xx support
I noted on a site utilizing buildroot that there was i.MXRT10xx support. In downloading buildroot, I did not notice the MXRT1060 EVK board included in any of the defconfigs. I was just curious if this does exist?
thx
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Hello Jautry(hope the name is correct),
Quoted 4 lines
Il giorno 29 set 2022, alle ore 03:29, [email protected] ha scritto:
I noted on a site utilizing buildroot that there was i.MXRT10xx support. In downloading buildroot, I did not notice the MXRT1060 EVK board included in any of the defconfigs. I was just curious if this does exist?
that is still not upstreamed and we’re waiting for third iteration of patch that adds support for imxrt1050 from Jesse. The repository should be Jesse’s one or mine.
This is the old version that should work for imxrt1050 but also for imxrt1060(AFAIK registers are the same for most stuff):
http://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/
So you can download and apply that patch and test the resulting image on the board. It would be good having someone to test it apart Jesse and me.
Best regards
Giulio Benetti
Quoted 6 lines
thx
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 6 lines · Giulio Benetti
Hello Jautry(hope the name is correct),
Quoted 4 lines
Il giorno 29 set 2022, alle ore 03:29, [email protected] ha scritto:
I noted on a site utilizing buildroot that there was i.MXRT10xx support.
What site?
Emcraft has a paid for BSP other than that I haven't seen this other than the mailing list...
In downloading buildroot, I did not notice the MXRT1060 EVK board
included in any of the defconfigs. I was just curious if this does exist?
Quoted 8 lines
that is still not upstreamed and we’re waiting for third iteration of patch that adds support for imxrt1050 from Jesse. The repository should be Jesse’s one or mine.
This is the old version that should work for imxrt1050 but also for imxrt1060(AFAIK registers are the same for most stuff):
http://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/So you can download and apply that patch and test the resulting image on the board. It would be good having someone to test it apart Jesse and me.
Yes please test
Thanks,
Jesse Taube
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot