Skip to contentSkip to conversation

Building error for yocto

DISCUSSION Alexander Keller 2 participants 2 messages Apr 23, 2013 – May 8, 2013

lore
Share & tools
lore
#0 lore raw

Hello,

I have trying to build yocto for the past couple of days to test the hardware acceleration on the X11. However, when I try to build yocto I keep on getting this error:

ERROR: Function failed: do_configure (see /home/lucid/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/busybox/1.20.2 -r8/temp/log.do_configure.30517 for further information)

ERROR: Logfile of failure stored in:
/home/lucid/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/busybox/1.20.2 -r8/temp/log.do_configure.30517

Log data follows:

| DEBUG: Executing python function sysroot_cleansstate

| DEBUG: Python function sysroot_cleansstate finished

| DEBUG: Executing shell function do_configure

| trap: 80: SIGHUP: bad trap

Does anyone know what could be the cause of this error?

I am using Ubuntu 10.10 on my host and I am building master branch.

Any help will be most appreciated,

Thanks for your help,

Alexander Keller

#1 lore raw
Quoted 13 lines · Alexander Keller

I have trying to build yocto for the past couple of days to test the hardware acceleration on the X11. However, when I try to build yocto I keep on getting this error:

ERROR: Function failed: do_configure (see /home/lucid/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/busybox/1.20.2-r8/temp/log.do_configure.30517 for further information)

ERROR: Logfile of failure stored in:
/home/lucid/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/busybox/1.20.2-r8/temp/log.do_configure.30517

Log data follows:

Quoted 7 lines

| DEBUG: Executing python function sysroot_cleansstate

| DEBUG: Python function sysroot_cleansstate finished

| DEBUG: Executing shell function do_configure

| trap: 80: SIGHUP: bad trap

I just debugged this on IRC with another person who is seeing it, and it's a problem in kern-tools-native. I'll work a patch out tomorrow but a quick fix to you or anyone else seeing this appears to be to open usr/bin/merge_config.sh in your *native* sysroot and change the first line from #! /bin/sh to #! /bin/bash.

Ross