Skip to contentSkip to conversation

Graphics Mode Woes

DISCUSSION Bobby Hitt 4 participants 6 messages Apr 23, 2004

lore
Share & tools
lore

Bobby Hitt

author
#0 lore raw

Hello,

I'm attempting to get linux 2.6.5 to go into 1024x768x64k mode with my NVidia GEForce card. Under 2.4.25, it works fine with "vga=791" in my lilo.conf file. Here's what's in the log:

Apr 22 17:19:09 gateway kernel: vesafb: framebuffer at 0xf0000000, mapped to
0xe080d000, size 3072k
Apr 22 17:19:09 gateway kernel: vesafb: mode is 1024x768x16,
linelength=2048, pages=0
Apr 22 17:19:09 gateway kernel: vesafb: protected mode interface info at
c000:c590
Apr 22 17:19:09 gateway kernel: vesafb: scrolling: redraw
Apr 22 17:19:09 gateway kernel: vesafb: directcolor: size=0:5:6:5,
shift=0:11:5:0
Apr 22 17:19:09 gateway kernel: Console: switching to colour frame buffer
device 128x48
Apr 22 17:19:09 gateway kernel: fb0: VESA VGA frame buffer device

Under 2.6.5:

Apr 22 17:57:58 gateway kernel: rivafb: nVidia device/chipset 10DE0110
Apr 22 17:57:58 gateway kernel: rivafb: Detected CRTC controller 0 being
used
Apr 22 17:57:58 gateway kernel: rivafb: RIVA MTRR set to ON
Apr 22 17:57:58 gateway kernel: rivafb: PCI nVidia NV10 framebuffer ver
0.9.5b (nVidiaGeForce2-M, 32MB @ 0xF0000000)
Apr 22 17:57:58 gateway kernel: vga16fb: initializing
Apr 22 17:57:58 gateway kernel: vga16fb: mapped to 0xc00a0000
Apr 22 17:57:58 gateway kernel: fb1: VGA16 VGA frame buffer device

Totally different output and no references to vesafb. With "vga=791" on bootup the screen goes blank then switches to the normal graphics mode. Even when I use "vga=ask" and I put in a valid number, the screen switches to text mode momentarily then goes back to the normal graphics mode.

Here's the related portion of my .config file:

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

Any help or suggestions are appreciated,

Bobby

#1 lore raw
Quoted 5 lines · Bobby Hitt

CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=y

^^^^^^^^^^^^^^^^^^^^

If you want vesa framebuffer why even select rivabf (NVidia)?

Signature · 1 line
Dmitry
#2 lore raw
In reply to Bobby Hitt
Quoted 43 lines · Bobby Hitt

Hello,

Here's the related portion of my .config file:
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_I810 is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

Quoted 3 lines

Any help or suggestions are appreciated,

Bobby

I believe that you only want a single one of the CONFIG_FB options set. As I recall, having more then one built in to the kernel causes problems, especially with VGA16 and VESA. Why not just turn on CONFIG_FB_VESA=y, and make the others modules (=m).

Why not turn off, or at least build as modules, all the things you aren't really going to be using. Building everything into the kernel is a good way to cause yourself problems.

As an example, part of my config is:

CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y

The only things turned on in the graphics section are displayed above.

Paul

#3 lore raw
In reply to Bobby Hitt

That is because the native driver takes priority over the vesafb driver. Disable the native driver if you don't want ot use it.

Quoted 100 lines · Bobby Hitt

Hello,

I'm attempting to get linux 2.6.5 to go into 1024x768x64k mode with my NVidia GEForce card. Under 2.4.25, it works fine with "vga=791" in my lilo.conf file. Here's what's in the log:

Apr 22 17:19:09 gateway kernel: vesafb: framebuffer at 0xf0000000, mapped to
0xe080d000, size 3072k
Apr 22 17:19:09 gateway kernel: vesafb: mode is 1024x768x16,
linelength=2048, pages=0
Apr 22 17:19:09 gateway kernel: vesafb: protected mode interface info at
c000:c590
Apr 22 17:19:09 gateway kernel: vesafb: scrolling: redraw
Apr 22 17:19:09 gateway kernel: vesafb: directcolor: size=0:5:6:5,
shift=0:11:5:0
Apr 22 17:19:09 gateway kernel: Console: switching to colour frame buffer
device 128x48
Apr 22 17:19:09 gateway kernel: fb0: VESA VGA frame buffer device

Under 2.6.5:

Apr 22 17:57:58 gateway kernel: rivafb: nVidia device/chipset 10DE0110
Apr 22 17:57:58 gateway kernel: rivafb: Detected CRTC controller 0 being
used
Apr 22 17:57:58 gateway kernel: rivafb: RIVA MTRR set to ON
Apr 22 17:57:58 gateway kernel: rivafb: PCI nVidia NV10 framebuffer ver
0.9.5b (nVidiaGeForce2-M, 32MB @ 0xF0000000)
Apr 22 17:57:58 gateway kernel: vga16fb: initializing
Apr 22 17:57:58 gateway kernel: vga16fb: mapped to 0xc00a0000
Apr 22 17:57:58 gateway kernel: fb1: VGA16 VGA frame buffer device

Totally different output and no references to vesafb. With "vga=791" on bootup the screen goes blank then switches to the normal graphics mode. Even when I use "vga=ask" and I put in a valid number, the screen switches to text mode momentarily then goes back to the normal graphics mode.

Here's the related portion of my .config file:

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

Any help or suggestions are appreciated,

Bobby

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

author
#4 lore raw

Hello,

I've since gotten this working, thanks to the help of Dmitry Torokhov:
-----
This is what I have for my GeForce2 Go. Actually I think what hurts you is FB_VGA16, not RIVA.. Still, if you using vesa like I do there is no point compiling rivafb (and If you using nVIDIA's binary driver rivafb usually conflicts with it).
-----
I had the wrong drivers loaded.. My question now is where would I have been
able to disable the "native driver"? I don't recall seeing this in the .config file.

TIA,

Bobby

----- Original Message -----
From: "James Simmons" <[email protected]>
To: "Bobby Hitt" <[email protected]>
Cc: "linux-kernel" <[email protected]>
Sent: Friday, April 23, 2004 12:56 PM
Subject: Re: Graphics Mode Woes

Quoted 14 lines

That is because the native driver takes priority over the vesafb driver. Disable the native driver if you don't want ot use it.

Quoted 7 lines · Bobby Hitt

Hello,

I'm attempting to get linux 2.6.5 to go into 1024x768x64k mode with my NVidia GEForce card. Under 2.4.25, it works fine with "vga=791" in my lilo.conf file. Here's what's in the log:

Apr 22 17:19:09 gateway kernel: vesafb: framebuffer at 0xf0000000,

mapped to

Quoted 9 lines
Quoted 9 lines

0xe080d000, size 3072k

Apr 22 17:19:09 gateway kernel: vesafb: mode is 1024x768x16,
linelength=2048, pages=0
Apr 22 17:19:09 gateway kernel: vesafb: protected mode interface info at
c000:c590
Apr 22 17:19:09 gateway kernel: vesafb: scrolling: redraw
Apr 22 17:19:09 gateway kernel: vesafb: directcolor: size=0:5:6:5,
shift=0:11:5:0
Apr 22 17:19:09 gateway kernel: Console: switching to colour frame

buffer

Quoted 15 lines
Quoted 15 lines

device 128x48

Apr 22 17:19:09 gateway kernel: fb0: VESA VGA frame buffer device

Under 2.6.5:

Apr 22 17:57:58 gateway kernel: rivafb: nVidia device/chipset 10DE0110
Apr 22 17:57:58 gateway kernel: rivafb: Detected CRTC controller 0 being
used
Apr 22 17:57:58 gateway kernel: rivafb: RIVA MTRR set to ON
Apr 22 17:57:58 gateway kernel: rivafb: PCI nVidia NV10 framebuffer ver
0.9.5b (nVidiaGeForce2-M, 32MB @ 0xF0000000)
Apr 22 17:57:58 gateway kernel: vga16fb: initializing
Apr 22 17:57:58 gateway kernel: vga16fb: mapped to 0xc00a0000
Apr 22 17:57:58 gateway kernel: fb1: VGA16 VGA frame buffer device
Quoted 2 lines
Quoted 2 lines

Totally different output and no references to vesafb. With "vga=791" on bootup the screen goes blank then switches to the normal graphics mode.

Even

Quoted 57 lines
Quoted 57 lines

when I use "vga=ask" and I put in a valid number, the screen switches to text mode momentarily then goes back to the normal graphics mode.

Here's the related portion of my .config file:

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

Quoted 6 lines
Quoted 6 lines

Any help or suggestions are appreciated,

Bobby

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"

in

Quoted 5 lines
Quoted 4 lines

the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#5 lore raw
Quoted 7 lines

I've since gotten this working, thanks to the help of Dmitry Torokhov:
-----
This is what I have for my GeForce2 Go. Actually I think what hurts you is FB_VGA16, not RIVA.. Still, if you using vesa like I do there is no point compiling rivafb (and If you using nVIDIA's binary driver rivafb usually conflicts with it).

Makes sense since the vag16 uses a different pixel encoding method, planar verses packed pixels.

Quoted 3 lines

I had the wrong drivers loaded.. My question now is where would I have been
able to disable the "native driver"? I don't recall seeing this in the .config file.

By native I meant the nVIDIA fbdev driver.