Skip to contentSkip to conversation

U-Boot and USB 3.0

U-Boot Bin Meng 2 participants 4 messages Jan 29, 2019 – Jan 31, 2019 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Bin Meng

author
#1 lore raw

Hi,

Quoted 11 lines · DJM-Avalesta

Dear Bin Meng,

I have a version of U-Boot, on my Jetson TX2 hardware, which does not support USB 3.0.

U-Boot 2016.07-g9c3b9a4

(May 17 2018 - 00:08:48 -0700)

Can you please use latest U-Boot instead? That will be much easier.

Quoted 2 lines

Is it possible to apply one or more of your patches to this version to implement support for USB 3.0?

Technically it's doable.

Quoted 4 lines

Many thanks for your help.

Regards,
Bin

#2 lore raw

Hi Bin.

I am trying to build and load u-boot at the moment (just the same version as I already have) but I keep breaking the system. When I can build and overwrite u-boot, I will try a more recent version of the u-boot source, but I worry that there may be NVidia-Jetson-specific code in the current version of u-boot.

Many thanks
David

Quoted 22 lines · Bin Meng

Hi,

Quoted 7 lines · DJM-Avalesta

Dear Bin Meng,

I have a version of U-Boot, on my Jetson TX2 hardware, which does not support USB 3.0.

U-Boot 2016.07-g9c3b9a4

(May 17 2018 - 00:08:48 -0700)

Can you please use latest U-Boot instead? That will be much easier.

Quoted 1 line

Is it possible to apply one or more of your patches to this version to implement support for USB 3.0?

Technically it's doable.

Quoted 1 line

Many thanks for your help.

Regards,
Bin

#3 lore raw

Hi Bin

Further to previous, I have built the latest u-boot source from git.denx.de but, when I flash this version, it fails to boot the kernel. Here are the debug traces.

The working u-Boot:-

U-Boot 2019.01-dirty (Jan 29 2019 - 08:17:16 -0800)

TEGRA186

Model: NVIDIA P2771-0000-500
DRAM:  7.8 GiB
MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1

*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet at 2490000
Hit any key to stop autoboot:  0

Tegra186 (P2771-0000-500) # boot
MMC: no card present
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
213 bytes read in 90 ms (2 KiB/s)
p2771-0000 eMMC boot options
1: primary kernel
Enter choice: 1: primary kernel
Retrieving file: /boot/Image
20727600 bytes read in 546 ms (36.2 MiB/s)
append: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x140000 at 0x969ee000 lut_mem2=0x2008 at 0x969eb000 tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2.1 androidboot.serialno=0422518026482 bl_prof_dataptr=0x10000 at 0x277040000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4
## Flattened Device Tree blob at 92000000
Booting using the fdt blob at 0x92000000
reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000092000000, end 0000000092049273

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.38-tegra (buildbrain at mobile-u64-773)

(gcc version 4.8.5 (GCC) ) #1 SMP PREEMPT Thu May 17 00:15:19 PDT 2018

and the non-working u-boot:-

U-Boot 2019.01 (Jan 30 2019 - 17:38:42 +0000)

TEGRA186

Model: NVIDIA P2771-0000-500
DRAM:  7.8 GiB
MMC:   sdhci at 3400000: 1, sdhci at 3460000: 0

Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet at 2490000
Hit any key to stop autoboot:  0
MMC: no card present

switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
213 bytes read in 2 ms (103.5 KiB/s)
p2771-0000 eMMC boot options
1: primary kernel
Enter choice: 1: primary kernel
Retrieving file: /boot/Image
20727600 bytes read in 509 ms (38.8 MiB/s)
append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4
## Flattened Device Tree blob at 92000000
Booting using the fdt blob at 0x92000000
Using Device Tree in place at 0000000092000000, end 0000000092049273

Starting kernel ...

Any ideas?

- David

Quoted 29 lines · DJM-Avalesta

Hi Bin.

I am trying to build and load u-boot at the moment (just the same version as I already have) but I keep breaking the system. When I can build and overwrite u-boot, I will try a more recent version of the u-boot source, but I worry that there may be NVidia-Jetson-specific code in the current version of u-boot.

Many thanks
David

On 2019-01-29 02:49, Bin Meng wrote:
Hi,

On Tue, Jan 29, 2019 at 1:32 AM DJM-Avalesta <[email protected]> wrote:
Dear Bin Meng,

I have a version of U-Boot, on my Jetson TX2 hardware, which does not support USB 3.0.

U-Boot 2016.07-g9c3b9a4

(May 17 2018 - 00:08:48 -0700)

Can you please use latest U-Boot instead? That will be much easier.

Is it possible to apply one or more of your patches to this version to implement support for USB 3.0?

Technically it's doable.

Many thanks for your help.

Regards,
Bin

author
#4 lore raw
Quoted 5 lines · DJM-Avalesta

Hi Bin

Further to previous, I have built the latest u-boot source from git.denx.de but, when I flash this version, it fails to boot the kernel. Here are the debug traces.

+Tom who is the maintainer of Tegra to check.

[snip]

Regards,
Bin