Skip to contentSkip to conversation

ARM: tegra: note that p2371-2180 is Jetson TX1

PATCH New Stephen Warren 3 participants 3 messages Nov 12, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: tegra: note that p2371-2180 is Jetson TX1

From: Stephen Warren <[email protected]>

p2371-2180 is the engineering board name for the Jetson TX1 developer kit. Update Kconfig description and help text to make this obvious to everyone.

---
 arch/arm/mach-tegra/tegra210/Kconfig | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
arch/arm/mach-tegra/tegra210/Kconfig +5 -5
index b07363a4c38c..055fb124d8b7 100644
@@ -19,12 +19,12 @@ config TARGET_P2371_0000
 	  a GPIO expansion header, and an analog audio jack.
 
 config TARGET_P2371_2180
-	bool "NVIDIA Tegra210 P2371-2180 board"
+	bool "NVIDIA Tegra210 P2371-2180 (Jetson TX1) board"
 	help
-	  P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The
-	  combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB
-	  micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and
-	  two GPIO expansion headers.
+	  P2371-2180 (Jetson TX1 developer kit) is a P2180 CPU board married
+	  to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD
+	  card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host
+	  port, SATA, PCIe, and two GPIO expansion headers.
 
 config TARGET_P2571
 	bool "NVIDIA Tegra210 P2571 base board"
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 ARM: tegra: note that p2371-2180 is Jetson TX1

I'll add this to the PR I'm preparing.

Quoted 42 lines

-----Original Message-----
From: Stephen Warren [mailto:swarren at wwwdotorg.org]
Sent: Thursday, November 12, 2015 8:58 AM
To: u-boot at lists.denx.de; Simon Glass <[email protected]>; Tom Warren <[email protected]>; Stephen Warren <[email protected]>
Subject: [PATCH] ARM: tegra: note that p2371-2180 is Jetson TX1

From: Stephen Warren <[email protected]>

p2371-2180 is the engineering board name for the Jetson TX1 developer kit. Update Kconfig description and help text to make this obvious to everyone.

---
 arch/arm/mach-tegra/tegra210/Kconfig | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
arch/arm/mach- renamed from arch/arm/mach-tegra/tegra210/Kconfig +0 -0

tegra/tegra210/Kconfig
index b07363a4c38c..055fb124d8b7 100644

arch/arm/mach-tegra/tegra210/Kconfig +3 -5
@@ -19,12 +19,12 @@ config TARGET_P2371_0000
 	  a GPIO expansion header, and an analog audio jack.
 
 config TARGET_P2371_2180
-	bool "NVIDIA Tegra210 P2371-2180 board"
+	bool "NVIDIA Tegra210 P2371-2180 (Jetson TX1) board"
 	help
-	  P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The
-	  combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB
-	  micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and
-	  two GPIO expansion headers.
+	  P2371-2180 (Jetson TX1 developer kit) is a P2180 CPU board married
+	  to a P2597 I/O board. The combination contains SoC, DRAM, eMMC,

SD

arch/arm/mach-tegra/tegra210/Kconfig +2 -1
+	  card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host
+	  port, SATA, PCIe, and two GPIO expansion headers.
 
 config TARGET_P2571
 	bool "NVIDIA Tegra210 P2571 base board"
--
Quoted 1 line

1.9.1

-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

#2 lore raw

PATCH 1/1 ARM: tegra: note that p2371-2180 is Jetson TX1

In reply to Stephen Warren
Quoted 10 lines · Stephen Warren

From: Stephen Warren <[email protected]>

p2371-2180 is the engineering board name for the Jetson TX1 developer kit. Update Kconfig description and help text to make this obvious to everyone.

---
 arch/arm/mach-tegra/tegra210/Kconfig | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)