Compiling kernel for amd 8131 chipset
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 2 lines
Quoted 2 lines
I couldn't find any thread about this topic. Surprisingly if I start "knoppix 3.91 with 2.8.11" the chipset is
being
Quoted 6 lines
Quoted 1 line
detected (lspci)
<joke>
Apparently support for the 8131 was added sometime before 2.8.11 kernel release.
</joke>
*rofl* sure 2.6.11 @ knoppix's ;)
Quoted 4 lines
Quoted 1 line
Do you have any idea for doing that?
Take knoppix's .config and compile latest 2.6 using it (with "make oldconfig" step as usual).
So i did, using the same kernel 2.6.11 as knoppix 3.91
this time without applying the patch from amd for 8131 and also without the patch of bc5704
Wow! System works! *excited*
Now I'm trying to compile 2.6.14 and enjoy my brand net servers :-)
Thanx! - Miro
Back again: Kernel 2.6.12.6 works well for my system. Compiling the most ~similar 2.6.14 selections as 2.6.12.6 is not recognizing the 8131 chipset.
(I'm using default values for all new modules)
lsmod shows mostly the same result.
Any suggestion or reasons for "no longer supported 8131"?
+-------------------------------+ +-------------------------------+ | Miro Dietiker | | MD Systems Miro Dietiker | +-------------------------------+ +-------------------------------+
-----Ursprüngliche Nachricht-----
Von: Denis Vlasenko [mailto:[email protected]]
Gesendet: Dienstag, 8. November 2005 17:04
An: Miro Dietiker, MD Systems
Betreff: Re: Compiling kernel for amd 8131 chipset
Quoted 5 lines · MD Systems
Hi there
I've got a Tyan 2891 Barebone here and tried to compile kernel with support for AMD 8131 PCI-X Controller
(Since via this controller a network-chip bcm5704 is connected
on-board)
Quoted 3 lines
Link to chipset overview:
http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_903
Quoted 3 lines
4%5E9504,00.html
Link to patch:
http://cdrom.amd.com/21860/updates/opteron_drivers/linux/amdshpc-1.1.9.t
Quoted 9 lines
ar.gz
This patch is described to be for 2.6.11.9 but I'm not able to compile support for my 8131 (and sure the NIC as effect)
I tried multiple Kernels (such as 2.6.14, 2.6.12, 2.6.11.9)My last try (2.6.14) resulted in the error message:
insmod amdshpc.ko
amdshpc: Unknown symbolreparent_to_init
insmod: error inserting '/lib/modules/2.6.14/...': -1 Unknown symbol
in
Quoted 1 line
module
Most probably you have module/kernel version mismatch.
Quoted 2 lines
I couldn't find any thread about this topic. Surprisingly if I start "knoppix 3.91 with 2.6.11" the chipset is
being
Quoted 1 line
detected (lspci)
<joke>
Apparently support for the 8131 was added sometime before 2.8.11 kernel release.
</joke>
Quoted 1 line
Do you have any idea for doing that?
Take knoppix's .config and compile latest 2.6 using it (with "make oldconfig"
step as usual).
--
vda