ARM: S5P: Update DMA operation clock
Subsystems (3)
cover ARM: S5P: Update DMA operation clock
This patch updates Peri-DMA (PL330) operation clock on S5P SoCs which have PL330 DMAC. Basically, registered PDMA clocks as disabled clock and enabled when called pl330-probe() in s3c-pl330.c.
[PATCH 1/5] ARM: S5P6442: Add DMA operation clock [PATCH 2/5] ARM: S5PV210: Add DMA operation clock [PATCH 3/5] ARM: S5P64X0: Set DMA clock disable as default [PATCH 4/5] ARM: S5P: Reorder DMA platform device id [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
PATCH 1/5 ARM: S5P6442: Add DMA operation clock
From: Seungwhan Youn <[email protected]>
This patch adds DMA operation clock which is disabled as default.
--- arch/arm/mach-s5p6442/clock.c | 28 +++++++++++++++++++++++ arch/arm/mach-s5p6442/include/mach/regs-clock.h | 1 + 2 files changed, 29 insertions(+), 0 deletions(-)
arch/arm/mach-s5p6442/clock.c +28 -0
@@ -192,6 +192,11 @@ static struct clk clk_pclkd1 = { .parent = &clk_hclkd1, }; +int s5p6442_clk_ip0_ctrl (struct clk *clk,int enable) +{ +return s5p_gatectrl (S5P_CLKGATE_IP0 , clk, enable); +} +int s5p6442_clk_ip3_ctrl (struct clk *clk,int enable) {return s5p_gatectrl (S5P_CLKGATE_IP3 , clk, enable);
@@ -335,6 +340,16 @@ void __init_or_cpufreq s5p6442_setup_clocks(void) clk_pclkd1.rate = pclkd1; } +static struct clk init_clocks_disable[] = { + { + .name ="pdma" , + .id =-1 , + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip0_ctrl, + .ctrlbit = (1 <<3 ), + }, +}; +static struct clk init_clocks[] = { { .name ="systimer" ,
@@ -393,10 +408,23 @@ static struct clk *clks[] __initdata = {void __init s5p6442_register_clocks (void ) { +struct clk *clkptr; +int i, ret; +s3c24xx_register_clocks (clks,ARRAY_SIZE (clks));s3c_register_clksrc (clksrcs,ARRAY_SIZE (clksrcs));s3c_register_clocks (init_clocks,ARRAY_SIZE (init_clocks)); + clkptr = init_clocks_disable; +for (i =0 ; i <ARRAY_SIZE (init_clocks_disable); i++, clkptr++) { + ret =s3c24xx_register_clock (clkptr); +if (ret <0 ) { +printk (KERN_ERR "Fail to register clock %s (%d)\n" , + clkptr->name, ret); + }else + (clkptr->enable)(clkptr,0 ); + } +s3c_pwmclk_init (); }
arch/arm/mach-s5p6442/include/mach/regs-clock.h +1 -0
@@ -46,6 +46,7 @@#define S5P_CLK_DIV5 S5P_CLKREG(0x314)#define S5P_CLK_DIV6 S5P_CLKREG(0x318) +#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460)#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C)/* CLK_OUT */
Signature · 1 line
1.6.2.5
PATCH 1/5 ARM: S5P6442: Add DMA operation clock
Quoted 56 lines · Kukjin Kim
From: Seungwhan Youn <[email protected]>
This patch adds DMA operation clock which is disabled as default.
Signed-off-by Seungwhan Youn <[email protected]>Acked-by Jassi Brar <[email protected]>Signed-off-by Kukjin Kim <[email protected]>--- arch/arm/mach-s5p6442/clock.c | 28 +++++++++++++++++++++++ arch/arm/mach-s5p6442/include/mach/regs-clock.h | 1 + 2 files changed, 29 insertions(+), 0 deletions(-)arch/arm/mach-s5p6442/clock.c +18
-0@@ -192,6 +192,11 @@ static struct clk clk_pclkd1 = { .parent = &clk_hclkd1, }; +int s5p6442_clk_ip0_ctrl (struct clk *clk,int enable) +{ +return s5p_gatectrl (S5P_CLKGATE_IP0 , clk, enable); +} +int s5p6442_clk_ip3_ctrl (struct clk *clk,int enable) {return s5p_gatectrl (S5P_CLKGATE_IP3 , clk, enable);@@ -335,6 +340,16 @@ void __init_or_cpufreq s5p6442_setup_clocks(void) clk_pclkd1.rate = pclkd1; } +static struct clk init_clocks_disable[] = { + { + .name ="pdma" , + .id =-1 , + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip0_ctrl, + .ctrlbit = (1 <<3 ), + }, +}; +static struct clk init_clocks[] = { { .name ="systimer" ,@@ -393,10 +408,23 @@ static struct clk *clks[] __initdata = {void __init s5p6442_register_clocks (void ) { +struct clk *clkptr; +int i, ret; +s3c24xx_register_clocks (clks,ARRAY_SIZE (clks));s3c_register_clksrc (clksrcs,ARRAY_SIZE (clksrcs));s3c_register_clocks (init_clocks,ARRAY_SIZE (init_clocks));
arch/arm/mach-s5p6442/clock.c static struct clk *clks[] __initdata = { · line 427
Quoted 10 lines
arch/arm/mach-s5p6442/clock.c +9
-0+ clkptr = init_clocks_disable; +for (i =0 ; i <ARRAY_SIZE (init_clocks_disable); i++, clkptr++) { + ret =s3c24xx_register_clock (clkptr); +if (ret <0 ) { +printk (KERN_ERR "Fail to register clock %s (%d)\n" , + clkptr->name, ret); + }else + (clkptr->enable)(clkptr,0 ); + }
how about using s3c_register_clocks and then s3c_disable_clocks() ?
PATCH 1/5 ARM: S5P6442: Add DMA operation clock
Quoted 11 lines · Ben Dooks
Quoted 9 lines · Kukjin Kim
From: Seungwhan Youn <[email protected]>
This patch adds DMA operation clock which is disabled as default.
Signed-off-by Seungwhan Youn <[email protected]>Acked-by Jassi Brar <[email protected]>Signed-off-by Kukjin Kim <[email protected]>--- arch/arm/mach-s5p6442/clock.c | 28
Quoted 5 lines
+++++++++++++++++++++++
Review
Quoted 4 lines
arch/arm/mach-s5p6442/include/mach/regs-clock.h | 1 + 2 files changed, 29 insertions(+), 0 deletions(-)(quoted diff) +0
-0
b/arch/arm/mach-s5p6442/clock.c
Quoted 44 lines
Quoted 44 lines
index dcd20f1..16d6e7e 100644
arch/arm/mach-s5p6442/clock.c +18
-0@@ -192,6 +192,11 @@ static struct clk clk_pclkd1 = { .parent = &clk_hclkd1, }; +int s5p6442_clk_ip0_ctrl (struct clk *clk,int enable) +{ +return s5p_gatectrl (S5P_CLKGATE_IP0 , clk, enable); +} +int s5p6442_clk_ip3_ctrl (struct clk *clk,int enable) {return s5p_gatectrl (S5P_CLKGATE_IP3 , clk, enable);@@ -335,6 +340,16 @@ void __init_or_cpufreq s5p6442_setup_clocks(void) clk_pclkd1.rate = pclkd1; } +static struct clk init_clocks_disable[] = { + { + .name ="pdma" , + .id =-1 , + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip0_ctrl, + .ctrlbit = (1 <<3 ), + }, +}; +static struct clk init_clocks[] = { { .name ="systimer" ,@@ -393,10 +408,23 @@ static struct clk *clks[] __initdata = {void __init s5p6442_register_clocks (void ) { +struct clk *clkptr; +int i, ret; +s3c24xx_register_clocks (clks,ARRAY_SIZE (clks));s3c_register_clksrc (clksrcs,ARRAY_SIZE (clksrcs));s3c_register_clocks (init_clocks,ARRAY_SIZE (init_clocks));
Quoted 11 lines
arch/arm/mach-s5p6442/clock.c static struct clk *clks[] __initdata = { · line 427
Quoted 9 lines
arch/arm/mach-s5p6442/clock.c +9
-0+ clkptr = init_clocks_disable; +for (i =0 ; i <ARRAY_SIZE (init_clocks_disable); i++, clkptr++) { + ret =s3c24xx_register_clock (clkptr); +if (ret <0 ) { +printk (KERN_ERR "Fail to register clock %s (%d)\n" , + clkptr->name, ret); + }else + (clkptr->enable)(clkptr,0 ); + }how about using
s3c_register_clocksand thens3c_disable_clocks()?
Yeah, your suggestion is better to me also :-)
But I think other Samsung SoCs need it too..so I'd like to apply this now then will update all regarding stuff for our Samsung SoCs soon..if you're ok.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
PATCH 2/5 ARM: S5PV210: Add DMA operation clock
In reply to Kukjin KimFrom: Seungwhan Youn <[email protected]>
This patch adds DMA operation clock which is disabled as default.
--- arch/arm/mach-s5pv210/clock.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-)
arch/arm/mach-s5pv210/clock.c +12 -0
@@ -311,6 +311,18 @@ static struct clk_ops clk_fout_apll_ops = {static struct clk init_clocks_disable[] = { { + .name ="pdma" , + .id =0 , + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 <<3 ), + }, { + .name ="pdma" , + .id =1 , + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 <<4 ), + }, { .name ="rot" , .id =-1 , .parent = &clk_hclk_dsys.clk,
Signature · 1 line
1.6.2.5
PATCH 3/5 ARM: S5P64X0: Set DMA clock disable as default
In reply to Kukjin KimFrom: Seungwhan Youn <[email protected]>
This patch modify to DMA operation clock into disable list for default clock setting.
--- arch/arm/mach-s5p64x0/clock-s5p6440.c | 12 ++++++------ arch/arm/mach-s5p64x0/clock-s5p6450.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-)
arch/arm/mach-s5p64x0/clock-s5p6440.c +6 -6
@@ -153,6 +153,12 @@ static struct clk init_clocks_disable[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 8), }, { + .name = "pdma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { .name = "hsmmc", .id = 0, .parent = &clk_hclk_low.clk,
@@ -334,12 +340,6 @@ static struct clk init_clocks[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 21), }, { - .name = "dma", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { .name = "uart", .id = 0, .parent = &clk_pclk_low.clk,
arch/arm/mach-s5p64x0/clock-s5p6450.c +6 -6
@@ -189,6 +189,12 @@ static struct clk init_clocks_disable[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 3), }, { + .name = "pdma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { .name = "hsmmc", .id = 0, .parent = &clk_hclk_low.clk,
@@ -286,12 +292,6 @@ static struct clk init_clocks[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 21), }, { - .name = "dma", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { .name = "uart", .id = 0, .parent = &clk_pclk_low.clk,
Signature · 1 line
1.6.2.5
PATCH 4/5 ARM: S5P: Reorder DMA platform device id
In reply to Kukjin KimFrom: Seungwhan Youn <[email protected]>
This patch is matched-up DMA platform device id to it's clock id.
--- arch/arm/mach-s5p6442/dma.c | 2 +- arch/arm/mach-s5p64x0/dma.c | 2 +- arch/arm/mach-s5pc100/dma.c | 4 ++-- arch/arm/mach-s5pv210/dma.c | 4 ++-- 4 files changed, 6 insertions(+), 6 deletions(-)
arch/arm/mach-s5p6442/dma.c +1 -1
@@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5p6442_pdma_pdata = {static struct platform_device s5p6442_device_pdma = { .name ="s3c-pl330" , - .id =1 , + .id =-1 , .num_resources =ARRAY_SIZE (s5p6442_pdma_resource), .resource = s5p6442_pdma_resource, .dev = {
arch/arm/mach-s5p64x0/dma.c +1 -1
@@ -122,7 +122,7 @@ static struct s3c_pl330_platdata s5p6450_pdma_pdata = {static struct platform_device s5p64x0_device_pdma = { .name ="s3c-pl330" , - .id =0 , + .id =-1 , .num_resources =ARRAY_SIZE (s5p64x0_pdma_resource), .resource = s5p64x0_pdma_resource, .dev = {
arch/arm/mach-s5pc100/dma.c +2 -2
@@ -81,7 +81,7 @@ static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {static struct platform_device s5pc100_device_pdma0 = { .name ="s3c-pl330" , - .id =1 , + .id =0 , .num_resources =ARRAY_SIZE (s5pc100_pdma0_resource), .resource = s5pc100_pdma0_resource, .dev = {
@@ -143,7 +143,7 @@ static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {static struct platform_device s5pc100_device_pdma1 = { .name ="s3c-pl330" , - .id =2 , + .id =1 , .num_resources =ARRAY_SIZE (s5pc100_pdma1_resource), .resource = s5pc100_pdma1_resource, .dev = {
arch/arm/mach-s5pv210/dma.c +2 -2
@@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {static struct platform_device s5pv210_device_pdma0 = { .name ="s3c-pl330" , - .id =1 , + .id =0 , .num_resources =ARRAY_SIZE (s5pv210_pdma0_resource), .resource = s5pv210_pdma0_resource, .dev = {
@@ -144,7 +144,7 @@ static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {static struct platform_device s5pv210_device_pdma1 = { .name ="s3c-pl330" , - .id =2 , + .id =1 , .num_resources =ARRAY_SIZE (s5pv210_pdma1_resource), .resource = s5pv210_pdma1_resource, .dev = {
Signature · 1 line
1.6.2.5
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
In reply to Kukjin KimFrom: Seungwhan Youn <[email protected]>
This patch adds to enable/disable DMA operation clock on S3C-PL330 DMA controller driver.
--- arch/arm/plat-samsung/s3c-pl330.c | 34 +++++++++++++++++++++++++++------- 1 files changed, 27 insertions(+), 7 deletions(-)
arch/arm/plat-samsung/s3c-pl330.c +27 -7
@@ -15,6 +15,8 @@#include <linux/io.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> #include <asm/hardware/pl330.h>
@@ -27,6 +29,7 @@* @node: To attach to the global list of DMACs. * @pi: PL330 configuration info for the DMAC. * @kmcache: Pool to quickly allocate xfers for all channels in the dmac. +* @clk: Pointer of DMAC operation clock. */ struct s3c_pl330_dmac {unsigned busy_chan;
@@ -34,6 +37,7 @@ struct s3c_pl330_dmac {struct list_head node;struct pl330_info *pi;struct kmem_cache *kmcache; +struct clk *clk; };/**
@@ -1072,16 +1076,25 @@ static int pl330_probe(struct platform_device *pdev)if (ret) goto probe_err4; - ret =pl330_add (pl330_info); -if (ret) - goto probe_err5; -/* Allocate a new DMAC */ s3c_pl330_dmac =kmalloc (sizeof (*s3c_pl330_dmac),GFP_KERNEL );if (!s3c_pl330_dmac) { ret = -ENOMEM ; + goto probe_err5; + } + +/* Get operation clock and enable it */ + s3c_pl330_dmac->clk =clk_get (&pdev->dev,"pdma" ); +if (IS_ERR (s3c_pl330_dmac->clk)) { +dev_err (&pdev->dev,"Cannot get operation clock.\n" ); + ret = -EINVAL ; goto probe_err6; } +clk_enable (s3c_pl330_dmac->clk); + + ret =pl330_add (pl330_info); +if (ret) + goto probe_err7;/* Hook the info */ s3c_pl330_dmac->pi = pl330_info;
@@ -1094,7 +1107,7 @@ static int pl330_probe(struct platform_device *pdev)if (!s3c_pl330_dmac->kmcache) { ret = -ENOMEM ; - goto probe_err7; + goto probe_err8; }/* Get the list of peripherals */
@@ -1120,10 +1133,13 @@ static int pl330_probe(struct platform_device *pdev)return 0 ; +probe_err8: +pl330_del (pl330_info); probe_err7: -kfree (s3c_pl330_dmac); +clk_disable (s3c_pl330_dmac->clk); +clk_put (s3c_pl330_dmac->clk); probe_err6: -pl330_del (pl330_info); +kfree (s3c_pl330_dmac); probe_err5:free_irq (irq, pl330_info); probe_err4:
@@ -1188,6 +1204,10 @@ static int pl330_remove(struct platform_device *pdev) } } +/* Disable operation clock */ +clk_disable (dmac->clk); +clk_put (dmac->clk); +/* Remove the DMAC */ list_del (&dmac->node);kfree (dmac);
Signature · 1 line
1.6.2.5
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
Quoted 4 lines · Kukjin Kim
From: Seungwhan Youn <[email protected]>
This patch adds to enable/disable DMA operation clock on S3C-PL330 DMA controller driver.
The title and description seems to clock gating but actual code is just enable at probe and disable at remove.
Can you make it REAL clock gating, enable clock only when using?
Thank you,
Kyungmin Park
Quoted 111 lines
Signed-off-by Seungwhan Youn <[email protected]>Acked-by Jassi Brar <[email protected]>Signed-off-by Kukjin Kim <[email protected]>---
?arch/arm/plat-samsung/s3c-pl330.c | ? 34 +++++++++++++++++++++++++++------- ?1 files changed, 27 insertions(+), 7 deletions(-)arch/arm/plat-samsung/s3c-pl330.c +0
-0@@ -15,6 +15,8 @@?#include <
linux/io.h>
?#include <linux/slab.h>
?#include <linux/platform_device.h>arch/arm/plat-samsung/s3c-pl330.c +2
-0+#include <linux/clk.h> +#include <linux/err.h> ?#include <
asm/hardware/pl330.h>arch/arm/plat-samsung/s3c-pl330.c +0
-0@@ -27,6 +29,7 @@?* @node: To attach to the global list of DMACs.
?* @pi: PL330 configuration info for the DMAC.
?* @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
+ * @clk: Pointer of DMAC operation clock.
?*/
?structs3c_pl330_dmac{
? ? ? ?unsigned ? ? ? ? ? ? ? ?busy_chan;arch/arm/plat-samsung/s3c-pl330.c +1
-0@@ -34,6 +37,7 @@ struct s3c_pl330_dmac { ? ? ? ?struct list_head ? ? ? ?node; ? ? ? ?struct pl330_info ? ? ? *pi; ? ? ? ?struct kmem_cache ? ? ? *kmcache; + ? ? ? struct clk ? ? ? ? ? ? ?*clk; ?};?/**
arch/arm/plat-samsung/s3c-pl330.c +0
-4@@ -1072,16 +1076,25 @@ static int pl330_probe(struct platform_device *pdev) ? ? ? ?if (ret) ? ? ? ? ? ? ? ?goto probe_err4; - ? ? ? ret = pl330_add(pl330_info); - ? ? ? if (ret) - ? ? ? ? ? ? ? goto probe_err5; -? ? ? ?/* Allocate a new DMAC */
? ? ? ?s3c_pl330_dmac =kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL); ? ? ? ?if (!s3c_pl330_dmac) {
? ? ? ? ? ? ? ?ret =-ENOMEM;
+ ? ? ? ? ? ? ? gotoprobe_err5;
+ ? ? ? }
+
+ ? ? ? /* Get operation clock and enable it */
+ ? ? ?s3c_pl330_dmac->clk=clk_get(&pdev->dev, "pdma");
+ ? ? ? if (IS_ERR(s3c_pl330_dmac->clk)) {
+ ? ? ? ? ? ? ?dev_err(&pdev->dev, "Cannot get operation clock.\n");
+ ? ? ? ? ? ? ? ret =-EINVAL;
? ? ? ? ? ? ? ?gotoprobe_err6;
? ? ? ?}
+ ? ? ?clk_enable(s3c_pl330_dmac->clk);
+
+ ? ? ? ret =pl330_add(pl330_info);
+ ? ? ? if (ret)
+ ? ? ? ? ? ? ? gotoprobe_err7;? ? ? ?/* Hook the info */
? ? ? ?s3c_pl330_dmac->pi =pl330_info;arch/arm/plat-samsung/s3c-pl330.c +1
-1@@ -1094,7 +1107,7 @@ static int pl330_probe(struct platform_device *pdev) ? ? ? ?if (!s3c_pl330_dmac->kmcache) { ? ? ? ? ? ? ? ?ret = -ENOMEM; - ? ? ? ? ? ? ? goto probe_err7; + ? ? ? ? ? ? ? goto probe_err8; ? ? ? ?}? ? ? ?/* Get the list of peripherals */
arch/arm/plat-samsung/s3c-pl330.c +2
-0@@ -1120,10 +1133,13 @@ static int pl330_probe(struct platform_device *pdev) ? ? ? ?return 0; +probe_err8: + ? ? ? pl330_del(pl330_info);?probe_err7:
- ? ? ?kfree(s3c_pl330_dmac);
+ ? ? ?clk_disable(s3c_pl330_dmac->clk);
+ ? ? ?clk_put(s3c_pl330_dmac->clk);
?probe_err6:
- ? ? ?pl330_del(pl330_info);
+ ? ? ?kfree(s3c_pl330_dmac);
?probe_err5:
? ? ? ?free_irq(irq,pl330_info);
?probe_err4:arch/arm/plat-samsung/s3c-pl330.c +4
-0@@ -1188,6 +1204,10 @@ static int pl330_remove(struct platform_device *pdev) ? ? ? ? ? ? ? ?} ? ? ? ?} + ? ? ? /* Disable operation clock */ + ? ? ? clk_disable(dmac->clk); + ? ? ? clk_put(dmac->clk); +? ? ? ?/* Remove the DMAC */
? ? ? ?list_del(&dmac->node);
? ? ? ?kfree(dmac);
--
1.6.2.5--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at ?http://vger.kernel.org/majordomo-info.html
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
Quoted 10 lines · Kyungmin Park
Quoted 4 lines · Kukjin Kim
From: Seungwhan Youn <[email protected]>
This patch adds to enable/disable DMA operation clock on S3C-PL330 DMA controller driver.
The title and description seems to clock gating but actual code is just enable at probe and disable at remove.
Can you make it REAL clock gating, enable clock only when using?
Of course we can. But that will need some intrusive changes. Later, we'll implement that desirable feature.
For now, many SoCs don't detect PL330 since the clocks are gated by default and we don't enable them in driver. So, this is just to get latest SoCs' PL330 working.
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
Quoted 10 lines · Jassi Brar
Quoted 9 lines · Kyungmin Park
Quoted 4 lines · Kukjin Kim
From: Seungwhan Youn <[email protected]>
This patch adds to enable/disable DMA operation clock on S3C-PL330 DMA controller driver.
The title and description seems to clock gating but actual code is just enable at probe and disable at remove.
Quoted 7 lines
Quoted 1 line
Can you make it REAL clock gating, enable clock only when using?
Of course we can. But that will need some intrusive changes. Later, we'll implement that desirable feature.
For now, many SoCs don't detect PL330 since the clocks are gated by default and we don't enable them in driver. So, this is just to get latest SoCs' PL330 working.
I see even though I don't know "later" is how much
and include the s5pc210 code also at this patchset.
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at ?http://vger.kernel.org/majordomo-info.html
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
Quoted 9 lines · Kyungmin Park
Quoted 7 lines
Quoted 1 line
Can you make it REAL clock gating, enable clock only when using?
Of course we can. But that will need some intrusive changes. Later, we'll implement that desirable feature.
For now, many SoCs don't detect PL330 since the clocks are gated by default and we don't enable them in driver. So, this is just to get latest SoCs' PL330 working.I see even though I don't know "later" is how much
We (apparently) don't have fixed policy about which devices have their clocks enabled by default and which don't.
So, by default PL330 clock is enabled on some platforms and not on others. This patch only makes sure the PL330 works on all platforms at boot-time.
Quoted 1 line
and include the s5pc210 code also at this patchset.
Yes, all platforms should be enabled for PL330 driver.
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
Quoted 11 lines · Jassi Brar
Quoted 9 lines · Kyungmin Park
Quoted 7 lines
Quoted 1 line
Can you make it REAL clock gating, enable clock only when using?
Of course we can. But that will need some intrusive changes. Later, we'll implement that desirable feature.
For now, many SoCs don't detect PL330 since the clocks are gated by default and we don't enable them in driver. So, this is just to get latest SoCs' PL330 working.I see even though I don't know "later" is how much
Quoted 8 lines
We (apparently) don't have fixed policy about which devices have their clocks enabled by default and which don't.
So, by default PL330 clock is enabled on some platforms and not on others. This patch only makes sure the PL330 works on all platforms at boot-time.Quoted 1 line
and include the s5pc210 code also at this patchset.
Yes, all platforms should be enabled for PL330 driver.
BTW, what's the id of mdma and which clock at c210?
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at ?http://vger.kernel.org/majordomo-info.html
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
Quoted 1 line · Kyungmin Park
BTW, what's the id of mdma and which clock at c210?
MDMA is not yet supported in Samsung mainline.
Any ID can be assigned as long as it doesn't conflict with other DMAs and resources correctly attached to it.
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
In reply to Jassi BrarQuoted 12 lines · Jassi Brar
Quoted 9 lines · Kyungmin Park
Quoted 7 lines
Quoted 1 line
Can you make it REAL clock gating, enable clock only when using?
Of course we can. But that will need some intrusive changes. Later, we'll implement that desirable feature.
For now, many SoCs don't detect PL330 since the clocks are gated by default and we don't enable them in driver. So, this is just to get latest SoCs' PL330 working.I see even though I don't know "later" is how much
Quoted 8 lines
We (apparently) don't have fixed policy about which devices have their clocks enabled by default and which don't.
So, by default PL330 clock is enabled on some platforms and not on others. This patch only makes sure the PL330 works on all platforms at boot-time.Quoted 1 line
and include the s5pc210 code also at this patchset.
Yes, all platforms should be enabled for PL330 driver.
If we want to use S5PV310/S5PC210 DMA now, need implementation some stuff of it.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
In reply to Kyungmin ParkQuoted 4 lines · Kyungmin Park
Quoted 2 lines · Kukjin Kim
From: Seungwhan Youn <[email protected]>
Quoted 8 lines
Quoted 2 lines
This patch adds to enable/disable DMA operation clock on S3C-PL330 DMA controller driver.
The title and description seems to clock gating but actual code is just enable at probe and disable at remove.
Can you make it REAL clock gating, enable clock only when using?
This is just to move DMA enable/disable clock into DMA driver(S3C PL330). So it would be better if we could discuss about what you said next time.
Basically, I prefer most clocks should be registered as disabled, then if required enable, just should be controlled in each driver.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
PATCH 5/5 ARM: SAMSUNG: Add to enable/disable clock on S3C PL330
Quoted 11 lines · Kukjin Kim
Quoted 10 lines · Kyungmin Park
Quoted 4 lines · Kukjin Kim
From: Seungwhan Youn <[email protected]>
This patch adds to enable/disable DMA operation clock on S3C-PL330 DMA controller driver.
The title and description seems to clock gating but actual code is just enable at probe and disable at remove.
Quoted 8 lines
Quoted 2 lines
Can you make it REAL clock gating, enable clock only when using?
This is just to move DMA enable/disable clock into DMA driver(S3C PL330). So it would be better if we could discuss about what you said next time.
Basically, I prefer most clocks should be registered as disabled, then if required enable, just should be controlled in each driver.
And support clock & block gating basically at drivers.
Quoted 14 lines
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at ?http://vger.kernel.org/majordomo-info.html