scripting the "rec" function for a fixed time.
I would like to be able to run the rec command unattended. Right now when executed, it will record sound until I hit C-c. I would really like to be able to right a script which will execute "rec ...", then wait a specified period of time, then pass the C-c to it. Or is there a simpler way?
Thanks
Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 5 lines · Peter Howell
I would like to be able to run the rec command unattended. Right now when executed, it will record sound until I hit C-c. I would really like to be able to right a script which will execute "rec ...", then wait a specified period of time, then pass the C-c to it. Or is there a simpler way?
I waited to see if anyone else would respond, since I cannot actually answer your question.
"rec" is not a stock linux command, and I cannot readily identify a package that includes that application (just trying to match on "rec" turns up several hundred hits in the Debian package database). So I'd suggest you tell us a bit more about your setup, including enough information that we can identify and take a look at the package that includes this command.
What file format does it record to, and does it record from standard sound-card devices (like /dev/mixer or /dev/dsp)? Does its man page list any command-line arguments (many video recording programs, for example, accept a flag like "-t 5m" to specify recording time)?
Writing a script of the sort you have in mind is a bit more complicated than you might at first think, so you are wise to look for other options.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 9 lines · Ray Olszewski
Quoted 5 lines · Peter Howell
I would like to be able to run the rec command unattended. Right now when executed, it will record sound until I hit C-c. I would really like to be able to right a script which will execute "rec ...", then wait a specified period of time, then pass the C-c to it. Or is there a simpler way?
I waited to see if anyone else would respond, since I cannot actually answer your question.
I can shed some light.
Quoted 6 lines
"rec" is not a stock linux command, and I cannot readily identify a package that includes that application (just trying to match on "rec" turns up several hundred hits in the Debian package database). So I'd suggest you tell us a bit more about your setup, including enough information that we can identify and take a look at the package that includes this command.
rec is an unix command altho' not well supported, slackware 8 has it included.
rec --help shows a lot but thses are relavant to the question;
-c, --channels=CHANNELS specifies the number of sound channels in FILE -d, --device=DEVICE use DEVICE for input/output -f, --format=FORMAT specifies bit format of sample
FORMAT is either s, u, U, A, a, or g
-r, --rate=RATE sample rate in hertz of FILE
-s, --size=SIZE interpret size of sample
I think this one could be an help -s xxxxxxxb
SIZE is either b, w, l, f, d, or D
-t, --type=TYPE specifies file format of FILE
Now you could use trail and error and see how big one song is and then define the byte size.
rec should then exit without crtl-c.
Quoted 7 lines
What file format does it record to, and does it record from standard sound-card devices (like
/dev/mixeror/dev/dsp)? Does its man page list any command-line arguments (many video recording programs, for example, accept a flag like "-t 5m" to specify recording time)?Writing a script of the sort you have in mind is a bit more complicated than you might at first think, so you are wise to look for other options.
Agreed.
Signature · 9 lines
Regards Richard [email protected] http://people.zeelandnet.nl/pa3gcu/ - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 12 lines · On Tue, 2003-02-25 at 01:14, pa3gcu wrote:
Quoted 5 lines
"rec" is not a stock linux command, and I cannot readily identify a package that includes that application (just trying to match on "rec" turns up several hundred hits in the Debian package database). So I'd suggest you tell us a bit more about your setup, including enough information that we can identify and take a look at the package that includes this command.
rec is an unix command altho' not well supported, slackware 8 has it included.
rec --help shows a lot but thses are relavant to the question;
-c, --channels=CHANNELS specifies the number of sound channels in FILE -d, --device=DEVICE use DEVICE for input/output -f, --format=FORMAT specifies bit format of sample
Quoted 6 lines
FORMAT is either s, u, U, A, a, or g
-r, --rate=RATE sample rate in hertz of FILE
-s, --size=SIZE interpret size of sampleI think this one could be an help -s xxxxxxxb
SIZE is either b, w, l, f, d, or D
Alas no :-( size isn't the file size. It's really the width of each sample. eg b
for 8 bits, w for 16 bits....
It appears that rec does not buffer the sound, but instead writes it directly to the file.
It's inelegant, but I suppose I could kill the application after a specified delay. There are two problems with implementing that for me. Firstly, I don't think I could do that in perl, which I'm most familiar with because there doesn't appear to be an easy way to spawn a process and continue running the scipt. Secondly, I don't know how to run a process and get it's process id, which I'd need to kill it.
Ok, just did a little rtfm. I guess I could use ps and extract the id.
Now I guess I'd better learn some bash scripting
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 2 lines · Peter Howell
It appears that rec does not buffer the sound, but instead writes it directly to the file.
OK, i should have mentioned that i dont use the program myself.
Quoted 9 lines
It's inelegant, but I suppose I could kill the application after a specified delay. There are two problems with implementing that for me. Firstly, I don't think I could do that in perl, which I'm most familiar with because there doesn't appear to be an easy way to spawn a process and continue running the scipt. Secondly, I don't know how to run a process and get it's process id, which I'd need to kill it.
Ok, just did a little rtfm. I guess I could use ps and extract the id.
Now I guess I'd better learn some bash scripting
Do both at once, get pid(s) of rec and kill it/them.
kill ps aux | grep rec | grep -v grep | awk '{print $2}'
Signature · 9 lines
Regards Richard [email protected] http://people.zeelandnet.nl/pa3gcu/ - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 2 lines · Peter Howell
Ok, just did a little rtfm. I guess I could use ps and extract the id.
Now I guess I'd better learn some bash scripting
You can use pkill, too; it uses process names instead of ids.
Elias
Signature · 9 lines
University of Athens I bet the human brain Physics Department is a kludge --Marvin Minsky - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 33 lines · Peter Howell
Quoted 12 lines · On Tue, 2003-02-25 at 01:14, pa3gcu wrote:
Quoted 5 lines
"rec" is not a stock linux command, and I cannot readily identify a package that includes that application (just trying to match on "rec" turns up several hundred hits in the Debian package database). So I'd suggest you tell us a bit more about your setup, including enough information that we can identify and take a look at the package that includes this command.
rec is an unix command altho' not well supported, slackware 8 has it included.
rec --help shows a lot but thses are relavant to the question;
-c, --channels=CHANNELS specifies the number of sound channels in FILE -d, --device=DEVICE use DEVICE for input/output -f, --format=FORMAT specifies bit format of sampleQuoted 6 lines
FORMAT is either s, u, U, A, a, or g
-r, --rate=RATE sample rate in hertz of FILE
-s, --size=SIZE interpret size of sampleI think this one could be an help -s xxxxxxxb
SIZE is either b, w, l, f, d, or DAlas no :-(
size isn't the file size. It's really the width of each sample. eg b
for 8 bits, w for 16 bits....It appears that rec does not buffer the sound, but instead writes it directly to the file.
It's inelegant, but I suppose I could kill the application after a specified delay. There are two problems with implementing that for me. Firstly, I don't think I could do that in perl, which I'm most familiar with because there doesn't appear to be an easy way to spawn a process and continue running the scipt. Secondly, I don't know how to run a process and get it's process id, which I'd need to kill it.
Quoted 3 lines
Ok, just did a little rtfm. I guess I could use ps and extract the id.
Now I guess I'd better learn some bash scripting
There is a tcl based interpreter called expect which lets you spawn processes and gives you it's pid easily. If you have any programming or scripting experience then it will be easy.
Or there is a program called timelimit which is part of the netpipes package that spawns a process and kills it if it doesn't return after a specified time.
I don't know how accurate these are and i have no experience of timelimit.
--
Carl
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 43 lines · Carl
Quoted 35 lines · Peter Howell
Quoted 18 lines · On Tue, 2003-02-25 at 01:14, pa3gcu wrote:
Quoted 6 lines
"rec" is not a stock linux command, and I cannot readily identify a package that includes that application (just trying to match on "rec" turns up several hundred hits in the Debian package database). So I'd suggest you tell us a bit more about your setup, including enough information that we can identify and take a look at the package that includes this command.
rec is an unix command altho' not well supported, slackware 8 has it included.
rec --help shows a lot but thses are relavant to the question;
-c, --channels=CHANNELS specifies the number of sound channels in
FILE -d, --device=DEVICE use DEVICE for input/output
-f, --format=FORMAT specifies bit format of sample
FORMAT is either s, u, U, A, a, or g
-r, --rate=RATE sample rate in hertz of FILE
-s, --size=SIZE interpret size of sampleQuoted 2 lines
I think this one could be an help -s xxxxxxxb
SIZE is either b, w, l, f, d, or DAlas no :-(
size isn't the file size. It's really the width of each sample.
eg b for 8 bits, w for 16 bits....It appears that rec does not buffer the sound, but instead writes it directly to the file.
It's inelegant, but I suppose I could kill the application after a specified delay. There are two problems with implementing that for me. Firstly, I don't think I could do that in perl, which I'm most familiar with because there doesn't appear to be an easy way to spawn a process and continue running the scipt. Secondly, I don't know how to run a process and get it's process id, which I'd need to kill it.Quoted 2 lines
Ok, just did a little rtfm. I guess I could use ps and extract
the id. Now I guess I'd better learn some bash scriptingThere is a tcl based interpreter called expect which lets you spawn processes and gives you it's pid easily. If you have any programming or scripting experience then it will be easy.
Quoted 5 lines
Or there is a program called timelimit which is part of the netpipes package that spawns a process and kills it if it doesn't return after a specified time.
I don't know how accurate these are and i have no experience of timelimit.
I am not sure if I am correct, but its worth a try:
If you are interested in scripting it I once had to do something similiar in BASH. By creating a function, it will execute the function commands in a subshell while continuing with the current script. Try something like this
#!/bin/bash
function boot ()
{
*RecordProgram Command Here*&
}
boot #calls the funtion boot.
let PID = $! #returns PID of last executed background command.
wait 9000 #let it run for 9000 seconds
kill $PID
Something like that. this is opposed to the example below where the background ampersand will hang the script. If $! doesnt return the correct pid then you might be able to fake it using awk.grep and the ps command to isolate the pid column.
#!/bin/bash
Recordprogram&
letPID = $!
wait 9000
kill $PID
I believe the function wont hang the script waiting for input like the above example. Let me know if this sounds logical. I would appreciate input from any real bash programmers to see if I am correct. As always, best of luck!
#------------------------
#Eric Bambach
#[email protected]
#------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 5 lines · Peter Howell
I would like to be able to run the rec command unattended. Right now when executed, it will record sound until I hit C-c. I would really like to be able to right a script which will execute "rec ...", then wait a specified period of time, then pass the C-c to it. Or is there a simpler way?
It's morning here and in 5mins I'm going to have exams in Quantum Mechanics so my reply will be quite theoritical. :-)
The solution may not be the optimal: just use at to kill rec after the specified time. Read the man page of at(1) for the details.
Elias
Signature · 9 lines
University of Athens I bet the human brain Physics Department is a kludge --Marvin Minsky - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 9 lines · Peter Howell
I would like to be able to run the rec command unattended. Right now when executed, it will record sound until I hit C-c. I would really like to be able to right a script which will execute "rec ...", then wait a specified period of time, then pass the C-c to it. Or is there a simpler way?
Thanks
Peter
I don't have rec or any hardware to do with sound, so I'll use "yes" to demonstrate a program that runs until interrupted. Not I use SIGHUP rather than SIGINT, as bash provides a handler for SIGINT for background jobs. stdout and stderr don't have to be null, but they have to be directed away from the terminal.
#!/bin/sh
yes >/dev/null 2>/dev/null &
sleep 1
kill -HUP $!
Lawson
--
---oops---
________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs