configs/imx7dpico: bump Kernel and U-Boot version
PATCH 1/1 configs/imx7dpico: bump Kernel and U-Boot version
Bump U-Boot to 2021.07 and kernel to version 5.13
--- configs/imx7dpico_defconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
configs/imx7dpico_defconfig +4 -4
@@ -3,8 +3,8 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_NEON_VFPV4=y -# Linux headers same as kernel, a 5.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y +# Linux headers same as kernel, a 5.13 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_13=y # system BR2_TARGET_GENERIC_GETTY_PORT="ttymxc4"
@@ -12,7 +12,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc4" # kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.13" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7d-pico-pi"
@@ -25,7 +25,7 @@ BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="SPL" BR2_TARGET_UBOOT_BOARDNAME="pico-pi-imx7d" BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.07" BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y # wifi firmware for brcm43439
Signature · 1 line
2.17.1
Fabio Estevam
reviewerPATCH 1/1 configs/imx7dpico: bump Kernel and U-Boot version
Quoted 4 lines · Pierre-Jean Texier
Bump U-Boot to 2021.07 and kernel to version 5.13
Signed-off-by Pierre-Jean Texier <[email protected]>
Thanks for the patch:
Fabio Estevam
reviewerPATCH 1/1 configs/imx7dpico: bump Kernel and U-Boot version
Hi Pierre-Jean,
Quoted 10 lines · Fabio Estevam
Quoted 4 lines · Pierre-Jean Texier
Bump U-Boot to 2021.07 and kernel to version 5.13
Signed-off-by Pierre-Jean Texier <[email protected]>Thanks for the patch:
Reviewed-by Fabio Estevam <[email protected]>
I forgot to ask: shouldn't we pass a extlinux.conf file so that it can boot by default now
as it uses distro boot in U-Boot?
Thanks
PATCH 1/1 configs/imx7dpico: bump Kernel and U-Boot version
Hi Fabio,
Le 10/07/2021 ? 20:30, Fabio Estevam a ?crit?:
Quoted 10 lines
Hi Pierre-Jean,
Quoted 7 lines · Fabio Estevam
Quoted 4 lines · Pierre-Jean Texier
Bump U-Boot to 2021.07 and kernel to version 5.13
Signed-off-by Pierre-Jean Texier <[email protected]>
Quoted 7 lines
Quoted 3 lines
Thanks for the patch:
Reviewed-by Fabio Estevam <[email protected]>I forgot to ask: shouldn't we pass a extlinux.conf file so that it can boot by default now
as it uses distro boot in U-Boot?
In fact, extlinux file is already used for this board, introduced by Joris in commit 40c5aa ("configs/imx7dpico: Bump Linux and U-Boot") [1]
See boot sequence after:
U-Boot 2021.07 (Jul 10 2021 - 20:04:17 +0200)
CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 40C Reset cause: POR Model: TechNexion PICO-IMX7D Board and PI baseboard Board: i.MX7D PICOSOM
<...>
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
159 bytes read in 1 ms (155.3 KiB/s)
1: imx7d-pico-buildroot
Retrieving file: /boot/zImage
9701104 bytes read in 219 ms (42.2 MiB/s)
append: root=PARTUUID=00000000-01 rootwait rw console=ttymxc4,115200 Retrieving file: /boot/imx7d-pico-pi.dtb
Thanks for the review !
Signature · 1 line
Pierre-Jean Texier
Fabio Estevam
reviewerPATCH 1/1 configs/imx7dpico: bump Kernel and U-Boot version
Hi Pierre-Jean,
Quoted 2 lines · Pierre-Jean Texier
In fact, extlinux file is already used for this board, introduced by Joris in commit 40c5aa ("configs/imx7dpico: Bump Linux and U-Boot") [1]
Ah, I got confused. It is imx7d-sdb board that misses extlinux.conf.
I will add extlinux.conf for imx7-sdb.
Thanks
Quoted 28 lines
See boot sequence after:
U-Boot 2021.07 (Jul 10 2021 - 20:04:17 +0200)
CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 40C Reset cause: POR Model: TechNexion PICO-IMX7D Board and PI baseboard Board: i.MX7D PICOSOM<...>
mmc0(part 0) is current device
Scanning mmc 0:1...
Found/boot/extlinux/extlinux.conf
Retrieving file:/boot/extlinux/extlinux.conf
159 bytes read in 1 ms (155.3 KiB/s)
1: imx7d-pico-buildroot
Retrieving file:/boot/zImage
9701104 bytes read in 219 ms (42.2 MiB/s)
append: root=PARTUUID=00000000-01 rootwait rw console=ttymxc4,115200 Retrieving file:/boot/imx7d-pico-pi.dtbThanks for the review !
[1] -
https://git.buildroot.net/buildroot/commit/board/technexion/imx7dpico/rootfs_overlay/boot/extlinux?id=40c5aa50cf6a26b4697bb0c9bd671d89a53edf5f
--
Pierre-Jean Texier
Thomas Petazzoni
AppliedPATCH 1/1 configs/imx7dpico: bump Kernel and U-Boot version
In reply to Pierre-Jean TexierQuoted 6 lines · On Sat, 10 Jul 2021 20:21:37 +0200 Pierre-Jean Texier <[email protected]>…
Bump U-Boot to 2021.07 and kernel to version 5.13
Signed-off-by Pierre-Jean Texier <[email protected]>--- configs/imx7dpico_defconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Applied to master, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com