Error on installing ELDK 2.1
Hi,all,
Some errors came up when I installed ELDK 2.1 on my REDHAT 7.3 HOST PC as follows.
[root at sgj opt]# mount /mnt/cdrom/
[root at sgj opt]# /mnt/cdrom/install -d /opt/eldk/ ppc_8xx
Do you really want to install into /opt/eldk directory[y/n]?: y
Creating directories
error: unrecognized db option: "db3" ignored. Done
Installing cross RPMs
error: unrecognized db option: "db3" ignored.
error: unrecognized db option: "db3" ignored.
error: cannot open Name index using db1 - Invalid argument (22)
error: unrecognized db option: "db3" ignored.
Preparing... error: unrecognized db
option: "db3" ignored.
error: cannot open Basenames index using db1 - Invalid argument (22) ########################################### [100%] package rpm-4.0.3-1.03b_2 is for a different architecture
I downloaded ELDK 2.1 and burned a CD.
BTW, I had installed MVL PRO3.0 on my host.Should I removed it for installing ELDK 2.1?
Thanks in advance!
Sam
_________________________________________________________
Do You Yahoo!?
??????????????????60???????
http://cn.rd.yahoo.com/mail_cn/tag/?http://cn.mail.yahoo.com
Quoted 3 lines · In message <[email protected]> you wrote:
Some errors came up when I installed ELDK 2.1 on my REDHAT 7.3 HOST PC as follows.
See http://www.denx.de/twiki/bin/view/DULG/ELDKInstallationAborts
Quoted 1 line
I downloaded ELDK 2.1 and burned a CD.
Alternatively, you gould use ELDK 3.0; see ftp://ftp.leo.org/pub/eldk/3.0/ppc-linux-x86/distribution/
Quoted 2 lines
BTW, I had installed MVL PRO3.0 on my host.Should I removed it for installing ELDK 2.1?
There is no reason to do that.
Best regards,
Wolfgang Denk
Signature · 6 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de PROGRAM - n. A magic spell cast over a computer allowing it to turn one's input into error messages. v. tr. - To engage in a pastime similar to banging one's head against a wall, but with fewer opportunities for reward.
Dear Mr. Wolfgang,
Quoted 4 lines · You
Quoted 2 lines
Some errors came up when I installed ELDK 2.1 on
my REDHAT 7.3 HOST PC as follows.See
http://www.denx.de/twiki/bin/view/DULG/ELDKInstallationAborts
Thanks for your hints.I neglected the FAQ.Sorry!
Best regards,
Sam
_________________________________________________________
Do You Yahoo!?
??????????????????60???????
http://cn.rd.yahoo.com/mail_cn/tag/?http://cn.mail.yahoo.com
[U-Boot-Users] SMSC91C111 performance...
Evening (o;
Users of SMSC91C111 chips...
What is the performance of the driver inside u-boot?
Get around up to 2 secs delay to "ping alive" and downloading a 2.5MByte binary with tftp takes up to 7 secs.
At least downliading works without errors on BF533 (o;
rick
[U-Boot-Users] SMSC91C111 performance...
Quoted 4 lines
What is the performance of the driver inside u-boot?
Get around up to 2 secs delay to "ping alive" and
Yes, the SMSC91C111 has an very long auto-negotation cycle...
Quoted 1 line
downloading a 2.5MByte binary with tftp takes up to 7 secs.
Wow, about 3 MBit -- that's good for the Chip. The SMSC91C111 self isn't fast enough. It has an non performant chip design (there are only 2x2KByte for FIFO). My latest tests with an PXA255 a/o NIOS + SMSC91C111 @ 32 bit bus results the same...
Best Regards,
Stephan Linz
[U-Boot-Users] SMSC91C111 performance...
Quoted 10 lines
Quoted 4 lines
What is the performance of the driver inside u-boot?
Get around up to 2 secs delay to "ping alive" and
Yes, the SMSC91C111 has an very long auto-negotation cycle...
Quoted 1 line
downloading a 2.5MByte binary with tftp takes up to 7 secs.
Wow, about 3 MBit -- that's good for the Chip. The SMSC91C111 self
isn't
Quoted 3 lines
fast enough. It has an non performant chip design (there are only 2x2KByte
for FIFO). My latest tests with an PXA255 a/o NIOS + SMSC91C111 @ 32
bit
Quoted 3 lines
bus
results the same...
Seems also tftp download is corrupting some packets...at least uclinux for BF533 always ends in panic...but not with same image loaded through VisualDSP...
Maybe should test first with loads (o;
rick