Handle update hardware queues and queue freeze more carefully
Subsystems (2)
v7 cover Handle update hardware queues and queue freeze more carefully
Hi,
v7 is addressing the comments from Sagi (wrong commit id and add an explenation why the queues are empty).
Daniel
v1:
- https://lore.kernel.org/linux-nvme/[email protected]/
v2:
- https://lore.kernel.org/linux-nvme/[email protected]/
- reviewed tags collected
- added 'update hardware queues' for all transport
- added fix for fc hanger in nvme_wait_freeze_timeout
v3:
- https://lore.kernel.org/linux-nvme/[email protected]/
- dropped 'nvme-fc: Freeze queues before destroying them'
- added James' two patches
v4:
- https://lore.kernel.org/linux-nvme/[email protected]/
- added 'nvme-*: Unfreeze queues on reconnect'
- added Hannes' reviewed tags
v5:
- https://lore.kernel.org/linux-nvme/[email protected]/
- dropped non nvme-fc patches
- updated 'nvme-fc: fix controller reset hang during traffic'
v6:
- https://lore.kernel.org/linux-nvme/[email protected]/
- updated commit message 'nvme-fc: Update hardware queues before using them'
- dropped 'nvme-fc: fix controller reset hang during traffic'
- added 'nvme-fc: Remove freeze/unfreeze around update_nr_hw_queues'
v7:
- updated commit id in last patch
- added explenation why the queues are empty in last patch
Daniel Wagner (1):
nvme-fc: Update hardware queues before using them
James Smart (2):
nvme-fc: avoid race between time out and tear down
nvme-fc: Remove freeze/unfreeze around update_nr_hw_queues
drivers/nvme/host/fc.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
Signature · 7 lines
2.29.2 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
PATCH v7 1/3 nvme-fc: Update hardware queues before using them
In case the number of hardware queues changes, we need to update the tagset and the mapping of ctx to hctx first.
If we try to create and connect the I/O queues first, this operation will fail (target will reject the connect call due to the wrong number of queues) and hence we bail out of the recreate function. Then we will to try the very same operation again, thus we don't make any progress.
--- drivers/nvme/host/fc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/nvme/host/fc.c +8 -8
@@ -2951,14 +2951,6 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)if (ctrl->ctrl.queue_count ==1 )return 0 ; - ret =nvme_fc_create_hw_io_queues (ctrl, ctrl->ctrl.sqsize +1 ); -if (ret) - goto out_free_io_queues; - - ret =nvme_fc_connect_io_queues (ctrl, ctrl->ctrl.sqsize +1 ); -if (ret) - goto out_delete_hw_queues; -if (prior_ioq_cnt != nr_io_queues) { dev_info(ctrl->ctrl.device, "reconnect: revising io queue count from %d to %d\n",
@@ -2968,6 +2960,14 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)nvme_unfreeze (&ctrl->ctrl); } + ret =nvme_fc_create_hw_io_queues (ctrl, ctrl->ctrl.sqsize +1 ); +if (ret) + goto out_free_io_queues; + + ret =nvme_fc_connect_io_queues (ctrl, ctrl->ctrl.sqsize +1 ); +if (ret) + goto out_delete_hw_queues; +return 0 ; out_delete_hw_queues:
Signature · 1 line
2.29.2
Re: [PATCH v7 1/3] nvme-fc: Update hardware queues before using them
Quoted 54 lines · Daniel Wagner
In case the number of hardware queues changes, we need to update the tagset and the mapping of ctx to hctx first.
If we try to create and connect the I/O queues first, this operation will fail (target will reject the connect call due to the wrong number of queues) and hence we bail out of the recreate function. Then we will to try the very same operation again, thus we don't make any progress.
Reviewed-by James Smart <[email protected]>Reviewed-by Ming Lei <[email protected]>Reviewed-by Hannes Reinecke <[email protected]>Signed-off-by Daniel Wagner <[email protected]>---
drivers/nvme/host/fc.c| 16 ++++++++--------1 file changed, 8 insertions(+), 8 deletions(-)drivers/nvme/host/fc.c +8
-8@@ -2951,14 +2951,6 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)if (ctrl->ctrl.queue_count ==1 )return 0 ; - ret =nvme_fc_create_hw_io_queues (ctrl, ctrl->ctrl.sqsize +1 ); -if (ret) - goto out_free_io_queues; - - ret =nvme_fc_connect_io_queues (ctrl, ctrl->ctrl.sqsize +1 ); -if (ret) - goto out_delete_hw_queues; -if (prior_ioq_cnt != nr_io_queues) { dev_info(ctrl->ctrl.device, "reconnect: revising io queue count from %d to %d\n",@@ -2968,6 +2960,14 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)nvme_unfreeze (&ctrl->ctrl); } + ret =nvme_fc_create_hw_io_queues (ctrl, ctrl->ctrl.sqsize +1 ); +if (ret) + goto out_free_io_queues; + + ret =nvme_fc_connect_io_queues (ctrl, ctrl->ctrl.sqsize +1 ); +if (ret) + goto out_delete_hw_queues; +return 0 ;
Quoted 4 lines
out_delete_hw_queues:Signature · 1 line
2.29.2
--
Himanshu Madhani Oracle Linux Engineering
PATCH v7 2/3 nvme-fc: avoid race between time out and tear down
In reply to Daniel WagnerFrom: James Smart <[email protected]>
To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue.
This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc.
--- drivers/nvme/host/fc.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/nvme/host/fc.c +2 -0
@@ -2487,6 +2487,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)*/ if (ctrl->ctrl.queue_count >1 ) {nvme_stop_queues (&ctrl->ctrl); +nvme_sync_io_queues (&ctrl->ctrl);blk_mq_tagset_busy_iter (&ctrl->tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl);blk_mq_tagset_wait_completed_request (&ctrl->tag_set);
@@ -2510,6 +2511,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)* clean up the admin queue. Same thing as above. */ blk_mq_quiesce_queue (ctrl->ctrl.admin_q); +blk_sync_queue (ctrl->ctrl.admin_q);blk_mq_tagset_busy_iter (&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl);blk_mq_tagset_wait_completed_request (&ctrl->admin_tag_set);
Signature · 1 line
2.29.2
Re: [PATCH v7 2/3] nvme-fc: avoid race between time out and tear down
Quoted 46 lines · Daniel Wagner
From: James Smart <[email protected]>
To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue.
This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch
3017013dcc"nvme-rdma: avoid race between time out and tear down". There is noteardown_lockin nvme-fc.Signed-off-by James Smart <[email protected]>CC Chao Leng <[email protected]>Tested-by Daniel Wagner <[email protected]>Reviewed-by Daniel Wagner <[email protected]>Reviewed-by Hannes Reinecke <[email protected]>---
drivers/nvme/host/fc.c| 2 ++1 file changed, 2 insertions(+)drivers/nvme/host/fc.c +2
-0@@ -2487,6 +2487,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)*/ if (ctrl->ctrl.queue_count >1 ) {nvme_stop_queues (&ctrl->ctrl); +nvme_sync_io_queues (&ctrl->ctrl);blk_mq_tagset_busy_iter (&ctrl->tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl);blk_mq_tagset_wait_completed_request (&ctrl->tag_set);@@ -2510,6 +2511,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)* clean up the admin queue. Same thing as above. */ blk_mq_quiesce_queue (ctrl->ctrl.admin_q); +blk_sync_queue (ctrl->ctrl.admin_q);blk_mq_tagset_busy_iter (&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl);blk_mq_tagset_wait_completed_request (&ctrl->admin_tag_set);Signature · 1 line
2.29.2
--
Himanshu Madhani Oracle Linux Engineering
PATCH v7 3/3 nvme-fc: Remove freeze/unfreeze around update_nr_hw_queues
In reply to Daniel WagnerFrom: James Smart <[email protected]>
Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze.
nvme-fc is draining the queues in the shutdown and error recovery path in __nvme_fc_abort_outstanding_ios.
This patch primarily reverts 88e837ed0f1f "nvme-fc: wait for queues to freeze before calling update_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes.
--- drivers/nvme/host/fc.c | 2 -- 1 file changed, 2 deletions(-)
drivers/nvme/host/fc.c +0 -2
@@ -2957,9 +2957,7 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)dev_info (ctrl->ctrl.device,"reconnect: revising io queue count from %d to %d\n" , prior_ioq_cnt, nr_io_queues); -nvme_wait_freeze (&ctrl->ctrl);blk_mq_update_nr_hw_queues (&ctrl->tag_set, nr_io_queues); -nvme_unfreeze (&ctrl->ctrl); } ret =nvme_fc_create_hw_io_queues (ctrl, ctrl->ctrl.sqsize +1 );
Signature · 1 line
2.29.2
Re: [PATCH v7 3/3] nvme-fc: Remove freeze/unfreeze around update_nr_hw_queues
Quoted 26 lines · Daniel Wagner
From: James Smart <[email protected]>
Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze.
nvme-fc is draining the queues in the shutdown and error recovery path in
__nvme_fc_abort_outstanding_ios.This patch primarily reverts
88e837ed0f1f"nvme-fc: wait for queues to freeze before callingupdate_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes.Signed-off-by James Smart <[email protected]>[dwagner: added explanation why no IO is pending]Signed-off-by Daniel Wagner <[email protected]>--- drivers/nvme/host/fc.c | 2 -- 1 file changed, 2 deletions(-)drivers/nvme/host/fc.c +0
-0
drivers/nvme/host/fc.c nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) · line 2963
Quoted 9 lines
drivers/nvme/host/fc.c +0
-2@@ -2957,9 +2957,7 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)dev_info (ctrl->ctrl.device,"reconnect: revising io queue count from %d to %d\n" , prior_ioq_cnt, nr_io_queues); -nvme_wait_freeze (&ctrl->ctrl);blk_mq_update_nr_hw_queues (&ctrl->tag_set, nr_io_queues); -nvme_unfreeze (&ctrl->ctrl); } ret =nvme_fc_create_hw_io_queues (ctrl, ctrl->ctrl.sqsize +1 );
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Kernel Storage Architect [email protected] +49 911 74053 688 SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), GF: Felix Imendörffer
Re: [PATCH v7 3/3] nvme-fc: Remove freeze/unfreeze around update_nr_hw_queues
In reply to Daniel WagnerQuoted 41 lines · Daniel Wagner
From: James Smart <[email protected]>
Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze.
nvme-fc is draining the queues in the shutdown and error recovery path in
__nvme_fc_abort_outstanding_ios.This patch primarily reverts
88e837ed0f1f"nvme-fc: wait for queues to freeze before callingupdate_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes.Signed-off-by James Smart <[email protected]>[dwagner: added explanation why no IO is pending]Signed-off-by Daniel Wagner <[email protected]>---
drivers/nvme/host/fc.c| 2 --1 file changed, 2 deletions(-)drivers/nvme/host/fc.c +0
-2@@ -2957,9 +2957,7 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)dev_info (ctrl->ctrl.device,"reconnect: revising io queue count from %d to %d\n" , prior_ioq_cnt, nr_io_queues); -nvme_wait_freeze (&ctrl->ctrl);blk_mq_update_nr_hw_queues (&ctrl->tag_set, nr_io_queues); -nvme_unfreeze (&ctrl->ctrl); } ret =nvme_fc_create_hw_io_queues (ctrl, ctrl->ctrl.sqsize +1 );Signature · 1 line
2.29.2
Looks Good.
--
Himanshu Madhani Oracle Linux Engineering
Re: [PATCH v7 3/3] nvme-fc: Remove freeze/unfreeze around update_nr_hw_queues
In reply to Daniel WagnerQuoted 25 lines · Daniel Wagner
From: James Smart <[email protected]>
Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze.
nvme-fc is draining the queues in the shutdown and error recovery path in
__nvme_fc_abort_outstanding_ios.This patch primarily reverts
88e837ed0f1f"nvme-fc: wait for queues to freeze before callingupdate_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes.Signed-off-by James Smart <[email protected]>[dwagner: added explanation why no IO is pending]Signed-off-by Daniel Wagner <[email protected]>--- drivers/nvme/host/fc.c | 2 -- 1 file changed, 2 deletions(-)drivers/nvme/host/fc.c +0
-0
drivers/nvme/host/fc.c nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) · line 2961
Quoted 7 lines
drivers/nvme/host/fc.c +0
-2@@ -2957,9 +2957,7 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)dev_info (ctrl->ctrl.device,"reconnect: revising io queue count from %d to %d\n" , prior_ioq_cnt, nr_io_queues); -nvme_wait_freeze (&ctrl->ctrl);blk_mq_update_nr_hw_queues (&ctrl->tag_set, nr_io_queues); -nvme_unfreeze (&ctrl->ctrl); }
Both connect queue and ns queues are added to this tag_set, so blk_mq_update_nr_hw_queues() will freeze them all before updating nr_hw_queues.
Signature · 1 line
Ming
Christoph Hellwig
AppliedThanks,
applied to nvme-5.15.