xfstests: xfs mount option sanity test
PATCH 1/1 xfstests: xfs mount option sanity test
XFS is changing to suit the new mount API, so add this case to make sure the changing won't bring in regression issue on xfs mount option parse phase, and won't change some default behaviors either.
--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.out
tests/xfs/148 new file +315 -0
@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null + fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point" + +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full 2>$tmp.mkfs + if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string> <key should be found?>] +_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect ${mounted}, but pass" + return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: fs not mounted even mount return 0" + return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect ${mounted}, but fail" + return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: fs is mounted even mount return non-zero" + return 1 + fi + fi + + # Skip below checking if "$key" argument isn't specified + if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect there's $key in $info, but not found" + return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect there's not $key in $info, but found" + return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB) through to 1GiB +do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true" +do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass "logdev=$LOOP_SPARE_DEV" "true" +do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128" "true" +do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true" +do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exit
tests/xfs/148.out new file +6 -0
@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testing
tests/xfs/group +1 -0
@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Signature · 1 line
2.20.1
Quoted 3 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make sure the changing won't bring in regression issue on xfs mount option parse phase, and won't change some default behaviors either.
This looks great, it looks quite comprehensive.
I'll give it a try once I've done the recently requested changes to my mount api series and let you know how it goes.
Presumably the test passes when using the current master branch of the xfs-linux tree, correct?
Ian
Quoted 370 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +68
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null + fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point" + +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string> <keyshould be found?>]
tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but pass" + return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mount return0"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but fail" + return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mount returnnon-zero"
tests/xfs/148 new file +15
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn't specified + if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in $info, butnot found"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in $info,but found"
tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB)through to 1GiB
tests/xfs/148 new file +88
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true" +do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass "logdev=$LOOP_SPARE_DEV""true"
tests/xfs/148 new file +61
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128" "true" +do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true" +do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 6 lines · Ian Kent
Quoted 3 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make sure the changing won't bring in regression issue on xfs mount option parse phase, and won't change some default behaviors either.
This looks great, it looks quite comprehensive.
This case test each xfs mount (not include rtdev) option one by one, but didn't test their combination. If you think testing option combination is necessary, I'll write another case to do that, as this case is big enough.
Quoted 6 lines
I'll give it a try once I've done the recently requested changes to my mount api series and let you know how it goes.
Presumably the test passes when using the current master branch of the xfs-linux tree, correct?
I tested on latest RHEL-8, and test passed. I'm doing more test on old(RHEL-7) and new(xfs-linux for-next) kernel.
Thanks,
Zorro
Quoted 374 lines
Ian
Quoted 370 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +68
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null + fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point" + +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string> <keyshould be found?>]
tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but pass" + return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mount return0"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but fail" + return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mount returnnon-zero"
tests/xfs/148 new file +15
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn't specified + if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in $info, butnot found"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in $info,but found"
tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB)through to 1GiB
tests/xfs/148 new file +88
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true" +do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass "logdev=$LOOP_SPARE_DEV""true"
tests/xfs/148 new file +61
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128" "true" +do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true" +do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 11 lines · Zorro Lang
Quoted 6 lines · Ian Kent
Quoted 3 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make sure the changing won't bring in regression issue on xfs mount option parse phase, and won't change some default behaviors either.
This looks great, it looks quite comprehensive.
This case test each xfs mount (not include rtdev) option one by one, but didn't test their combination. If you think testing option combination is necessary, I'll write another case to do that, as this case is big enough.
Hmm... by reading your patchset, looks like I'd better to test xfs ro/rw *remount* too.
Quoted 388 lines
Quoted 7 lines
I'll give it a try once I've done the recently requested changes to my mount api series and let you know how it goes.
Presumably the test passes when using the current master branch of the xfs-linux tree, correct?
I tested on latest RHEL-8, and test passed. I'm doing more test on old(RHEL-7) and new(xfs-linux for-next) kernel.
Thanks,
ZorroQuoted 374 lines
Ian
Quoted 370 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +68
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null + fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point" + +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string> <keyshould be found?>]
tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but pass" + return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mount return0"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but fail" + return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mount returnnon-zero"
tests/xfs/148 new file +15
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn't specified + if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in $info, butnot found"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in $info,but found"
tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB)through to 1GiB
tests/xfs/148 new file +88
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true" +do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass "logdev=$LOOP_SPARE_DEV""true"
tests/xfs/148 new file +61
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128" "true" +do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true" +do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 17 lines · Zorro Lang
Quoted 8 lines · Zorro Lang
Quoted 7 lines · Ian Kent
Quoted 5 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make
sure the changing won't bring in regression issue on xfs mount option
parse phase, and won't change some default behaviors either.Quoted 7 lines
Quoted 1 line
This looks great, it looks quite comprehensive.
This case test each xfs mount (not include rtdev) option one by one, but didn't
test their combination. If you think testing option combination is necessary,
I'll write another case to do that, as this case is big enough.
Quoted 3 lines
Hmm... by reading your patchset, looks like I'd better to test xfs ro/rw *remount*
too.
Yes, that should be tested even though it's reasonably straight forward to verify the change, you never know what may have changed by accident.
Quoted 407 lines
Quoted 407 lines
Quoted 7 lines
I'll give it a try once I've done the recently requested changes to my mount api series and let you know how it goes.
Presumably the test passes when using the current master branch of
the xfs-linux tree, correct?I tested on latest RHEL-8, and test passed. I'm doing more test on old(RHEL-7)
and new(xfs-linux for-next) kernel.Thanks,
ZorroQuoted 392 lines
Ian
Quoted 390 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +27
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV2>/dev/null
tests/xfs/148 new file +35
-0+ fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mountpoint"
tests/xfs/148 new file +6
-0+ +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfsQuoted 1 line
$seqres.full
2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string><key
should be found?>]tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butpass"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mountreturn
0"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butfail"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mountreturn
non-zero"tests/xfs/148 new file +5
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn'tspecified
tests/xfs/148 new file +10
-0+ if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in$info, but
not found"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in$info,
but found"tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB)through to 1GiB
tests/xfs/148 new file +7
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k""true"
tests/xfs/148 new file +81
-0+do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass"logdev=$LOOP_SPARE_DEV"
"true"tests/xfs/148 new file +45
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128""true"
+do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true"tests/xfs/148 new file +15
-0+do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 3 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make sure the changing won't bring in regression issue on xfs mount option parse phase, and won't change some default behaviors either.
I remember xfstests has a case xfs/191-input-validatio to test mkfs.xfs various behaviors. This case looks similar to xfs/191-input-validation. But xfs/191 is not worth updating because it needs to update every time if mkfs.xfs changed. mount action has the same problem.
Quoted 356 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+)create mode 100755 tests/xfs/148
create mode 100644 tests/xfs/148.outtests/xfs/148 new file +315
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null + fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point" + +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full 2>$tmp.mkfs + if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string> <key should be found?>] +_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect ${mounted}, but pass" + return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: fs not mounted even mount return 0" + return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect ${mounted}, but fail" + return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: fs is mounted even mount return non-zero" + return 1 + fi + fi + + # Skip below checking if "$key" argument isn't specified + if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect there's $key in $info, but not found" + return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect there's not $key in $info, but found" + return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB) through to 1GiB +do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true" +do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass "logdev=$LOOP_SPARE_DEV" "true" +do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128" "true" +do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true" +do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 11 lines · Yang Xu
Quoted 3 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make sure the changing won't bring in regression issue on xfs mount option parse phase, and won't change some default behaviors either.
I remember xfstests has a case xfs/191-input-validatio to test mkfs.xfs various behaviors. This case looks similar to xfs/191-input-validation. But xfs/191 is not worth updating because it needs to update every time if mkfs.xfs changed. mount action has the same problem.
This case tests xfs mount options(refer to man 5 xfs), focus on xfs_parseargs(), not mkfs.xfs itself.
Thanks,
Zorro
Quoted 358 lines
Quoted 356 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+)create mode 100755 tests/xfs/148
create mode 100644 tests/xfs/148.outtests/xfs/148 new file +315
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null + fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point" + +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full 2>$tmp.mkfs + if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string> <key should be found?>] +_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect ${mounted}, but pass" + return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: fs not mounted even mount return 0" + return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect ${mounted}, but fail" + return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: fs is mounted even mount return non-zero" + return 1 + fi + fi + + # Skip below checking if "$key" argument isn't specified + if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect there's $key in $info, but not found" + return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" + echo "ERROR: expect there's not $key in $info, but found" + return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB) through to 1GiB +do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true" +do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass "logdev=$LOOP_SPARE_DEV" "true" +do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128" "true" +do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true" +do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 3 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make sure the changing won't bring in regression issue on xfs mount option parse phase, and won't change some default behaviors either.
I think this isn't quite right:
[root@f30 xfstests-dev]# diff -u /home/raven/xfstests-dev/tests/xfs/148.out /home/raven/xfstests-dev/results//xfs/148.out.bad
home/raven/xfstests-dev/results//xfs/148.out.bad renamed from home/raven/xfstests-dev/tests/xfs/148.out +6 -0
@@ -3,4 +3,10 @@ ** create loop log device ** create loop mount point ** start xfs mount testing ... +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbufs in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found ** end of testing
Above logbufs and logbsize are present in the options string but an error is reported.
Ian
Quoted 370 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +68
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null + fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point" + +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string> <keyshould be found?>]
tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but pass" + return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mount return0"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but fail" + return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mount returnnon-zero"
tests/xfs/148 new file +15
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn't specified + if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in $info, butnot found"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in $info,but found"
tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB)through to 1GiB
tests/xfs/148 new file +88
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true" +do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass "logdev=$LOOP_SPARE_DEV""true"
tests/xfs/148 new file +61
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128" "true" +do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true" +do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 22 lines · Ian Kent
Quoted 3 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make sure the changing won't bring in regression issue on xfs mount option parse phase, and won't change some default behaviors either.
I think this isn't quite right:
[root@f30 xfstests-dev]# diff -u
/home/raven/xfstests-dev/tests/xfs/148.out/home/raven/xfstests-dev/results//xfs/148.out.badhome/raven/xfstests-dev/results//xfs/148.out.bad renamed from home/raven/xfstests-dev/tests/xfs/148.out +6
-0@@ -3,4 +3,10 @@ ** create loop log device ** create loop mount point ** start xfs mount testing ... +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbufs in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found ** end of testing
Quoted 2 lines
Above logbufs and logbsize are present in the options string but an error is reported.
Oh, There're two reasons to cause this failure:
1) I made a mistake at here:
if [ $rc -eq 0 ];then
if [ "$found" != "true" ];then
echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" echo "ERROR: expect there's $key in $info, but not found" return 1
fi
else
if [ "$found" != "false" ];then
echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts" echo "ERROR: expect there's not $key in $info, but found" return 1
fi
fi
I should exchange the "there's" line with "there's not" line.
2) The case expect there's not "logbufs=N" or "logbsize=N" output as default. But your system has these two options in /proc/mounts if mount without any options.
Hmm... strange, I've tested this case on rhel8 and rhel7, all passed. Where can I reproduce this error?
Thanks,
Zorro
Quoted 374 lines
Ian
Quoted 370 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +68
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null + fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point" + +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string> <keyshould be found?>]
tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but pass" + return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mount return0"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but fail" + return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mount returnnon-zero"
tests/xfs/148 new file +15
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn't specified + if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in $info, butnot found"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in $info,but found"
tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB)through to 1GiB
tests/xfs/148 new file +88
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true" +do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass "logdev=$LOOP_SPARE_DEV""true"
tests/xfs/148 new file +61
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128" "true" +do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true" +do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 66 lines · Zorro Lang
Quoted 34 lines · Ian Kent
Quoted 5 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make
sure the changing won't bring in regression issue on xfs mount option
parse phase, and won't change some default behaviors either.I think this isn't quite right:
[root@f30 xfstests-dev]# diff -u
/home/raven/xfstests-dev/tests/xfs/148.out/home/raven/xfstests-dev/results//xfs/148.out.bad
---/home/raven/xfstests-dev/tests/xfs/148.out2019-10-24
09:27:27.304929313 +0800
+++/home/raven/xfstests-dev/results//xfs/148.out.bad2019-
10-24 10:42:40.739436223 +0800home/raven/xfstests-dev/results//xfs/148.out.bad renamed from home/raven/xfstests-dev/tests/xfs/148.out +2
-0@@ -3,4 +3,10 @@ ** create loop log device ** create loop mount point ** start xfs mount testing ... +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbufs in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota,but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt
+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt
+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found
** end of testingQuoted 2 lines
Above logbufs and logbsize are present in the options string but an error is reported.
Oh, There're two reasons to cause this failure:
1) I made a mistake at here:if [ $rc -eq 0 ];then if [ "$found" != "true" ];then echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
echo "ERROR: expect there's $key in $info,
but not found"
return 1
fi
else
if [ "$found" != "false" ];then
echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
$opts"
echo "ERROR: expect there's not $key in
$info, but found"
return 1
fi
fiI should exchange the "there's" line with "there's not" line.
2) The case expect there's not "logbufs=N" or "logbsize=N" output as default.
But your system has these two options in/proc/mountsif mount without any
options.
Quoted 3 lines
Hmm... strange, I've tested this case on rhel8 and rhel7, all passed. Where
can I reproduce this error?
There's every chance this has changed along the way but the current upstream source sets these two fields to default values at some point (looks like via xfs_mountfs() from xfs_fs_fill_super() to me).
So the super block op ->show_options() sees them as > 0 and prints the option in the proc output.
But I'm not so familiar with xfs so the subtleties of these options eludes me.
Dave, can you help out please wrt. current RHEL xfs or what I'm missing here?
Quoted 379 lines
Thanks,
ZorroQuoted 375 lines
Ian
Quoted 373 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +68
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null + fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point" + +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string><key
should be found?>]tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but pass" + return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mount return0"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +6
-0+ echo "ERROR: expect ${mounted}, but fail" + return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mount returnnon-zero"
tests/xfs/148 new file +15
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn't specified + if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in $info, butnot found"
tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in $info,but found"
tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB)through to 1GiB
tests/xfs/148 new file +88
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true" +do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass"logdev=$LOOP_SPARE_DEV"
"true"tests/xfs/148 new file +45
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128""true"
+do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true"tests/xfs/148 new file +15
-0+do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 80 lines · Ian Kent
Quoted 70 lines · Zorro Lang
Quoted 37 lines · Ian Kent
Quoted 5 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to make
sure the changing won't bring in regression issue on xfs mount option
parse phase, and won't change some default behaviors either.I think this isn't quite right:
[root@f30 xfstests-dev]# diff -u
/home/raven/xfstests-dev/tests/xfs/148.out/home/raven/xfstests-dev/results//xfs/148.out.bad
---/home/raven/xfstests-dev/tests/xfs/148.out2019-10-24
09:27:27.304929313 +0800
+++/home/raven/xfstests-dev/results//xfs/148.out.bad2019-
10-24 10:42:40.739436223 +0800home/raven/xfstests-dev/results//xfs/148.out.bad renamed from home/raven/xfstests-dev/tests/xfs/148.out +2
-0@@ -3,4 +3,10 @@ ** create loop log device ** create loop mount point ** start xfs mount testing ... +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbufs inrw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota ,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt
+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota ,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt
+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota ,
but not found
** end of testingQuoted 2 lines
Above logbufs and logbsize are present in the options string but an error is reported.
Oh, There're two reasons to cause this failure:
1) I made a mistake at here:if [ $rc -eq 0 ];then if [ "$found" != "true" ];then echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
echo "ERROR: expect there's $key in $info,
but not found"
return 1
fi
else
if [ "$found" != "false" ];then
echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
$opts"
echo "ERROR: expect there's not $key in
$info, but found"
return 1
fi
fiI should exchange the "there's" line with "there's not" line.
2) The case expect there's not "logbufs=N" or "logbsize=N" output as
default.
But your system has these two options in/proc/mountsif mount without any
options.Quoted 4 lines
Hmm... strange, I've tested this case on rhel8 and rhel7, all passed.
Where
can I reproduce this error?There's every chance this has changed along the way but the current upstream source sets these two fields to default values at some point (looks like via
xfs_mountfs()fromxfs_fs_fill_super()to me).
Quoted 5 lines
So the super block op ->show_options() sees them as > 0 and prints the option in the proc output.
But I'm not so familiar with xfs so the subtleties of these options eludes me.
Oh, I see what's going on.
In, for example, RHEL-8 xlog_get_iclog_buffer_size() on entry we have:
if (mp->m_logbufs <= 0)
log->l_iclog_bufs = XLOG_MAX_ICLOGS;
else
log->l_iclog_bufs = mp->m_logbufs;which sets a struct xlog field but leaves the struct xfs_mount alone.
But upstream on entry we have:
if (mp->m_logbufs <= 0)
mp->m_logbufs = XLOG_MAX_ICLOGS;
if (mp->m_logbsize <= 0)
mp->m_logbsize = XLOG_BIG_RECORD_BSIZE;which sets the struct xfs_mount fields before continuing.
There's a lot more going on in xlog_get_iclog_buffer_size() so this is a very simple minded comparison on my part but the point is RHEL-8 (and I'm assuming RHEL-7 too) is different to the current xfs upstream.
Quoted 3 lines
Dave, can you help out please wrt. current RHEL xfs or what I'm missing here?
So I'd still like more info around this difference please Dave. Apologies for the post beer-clock intrusion, ;)
Quoted 396 lines
Quoted 396 lines
Thanks,
ZorroQuoted 392 lines
Ian
Quoted 390 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +27
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV2>/dev/null
tests/xfs/148 new file +35
-0+ fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mountpoint"
tests/xfs/148 new file +6
-0+ +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfsQuoted 1 line
$seqres.full
2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<key string><key
should be found?>]tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butpass"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mountreturn
0"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butfail"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mountreturn
non-zero"tests/xfs/148 new file +5
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn'tspecified
tests/xfs/148 new file +10
-0+ if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in$info, but
not found"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in$info,
but found"tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically 4KiB)through to 1GiB
tests/xfs/148 new file +7
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true" +do_test "-o allocsize=1048576k" pass "allocsize=1048576k""true"
tests/xfs/148 new file +81
-0+do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8 inclusive. +do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass"logdev=$LOOP_SPARE_DEV"
"true"tests/xfs/148 new file +45
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true" +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128""true"
+do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true"tests/xfs/148 new file +15
-0+do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 122 lines · Ian Kent
Quoted 88 lines · Ian Kent
Quoted 77 lines · Zorro Lang
Quoted 42 lines · Ian Kent
Quoted 7 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to
make
sure the changing won't bring in regression issue on xfs mount
option
parse phase, and won't change some default behaviors either.I think this isn't quite right:
[root@f30 xfstests-dev]# diff -u
/home/raven/xfstests-dev/tests/xfs/148.out/home/raven/xfstests-dev/results//xfs/148.out.bad
---/home/raven/xfstests-dev/tests/xfs/148.out2019-10-24
09:27:27.304929313 +0800
+++/home/raven/xfstests-dev/results//xfs/148.out.bad2019-
10-24 10:42:40.739436223 +0800home/raven/xfstests-dev/results//xfs/148.out.bad renamed from home/raven/xfstests-dev/tests/xfs/148.out +2
-0@@ -3,4 +3,10 @@ ** create loop log device ** create loop mount point ** start xfs mount testing ... +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbufs inrw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquo ta
,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt
+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquo ta
,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt
+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquo ta
,
but not found
** end of testingQuoted 3 lines
Above logbufs and logbsize are present in the options string but
an error is reported.Oh, There're two reasons to cause this failure:
1) I made a mistake at here:if [ $rc -eq 0 ];then if [ "$found" != "true" ];then echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
echo "ERROR: expect there's $key in
$info,
but not found"
return 1
fi
else
if [ "$found" != "false" ];then
echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
$opts"
echo "ERROR: expect there's not $key in
$info, but found"
return 1
fi
fiI should exchange the "there's" line with "there's not" line.
2) The case expect there's not "logbufs=N" or "logbsize=N" output as
default.
But your system has these two options in/proc/mountsif mount without any
options.Quoted 4 lines
Hmm... strange, I've tested this case on rhel8 and rhel7, all passed.
Where
can I reproduce this error?There's every chance this has changed along the way but the current upstream source sets these two fields to default values at some point (looks like via
xfs_mountfs()fromxfs_fs_fill_super()to me).Quoted 5 lines
So the super block op ->show_options() sees them as > 0 and prints the option in the proc output.
But I'm not so familiar with xfs so the subtleties of these options eludes me.
Oh, I see what's going on.
In, for example, RHEL-8
xlog_get_iclog_buffer_size()on entry we have:if (mp->m_logbufs <= 0) log->l_iclog_bufs = XLOG_MAX_ICLOGS; else log->l_iclog_bufs = mp->m_logbufs;which sets a struct xlog field but leaves the struct
xfs_mountalone.But upstream on entry we have:
if (mp->m_logbufs <= 0) mp->m_logbufs = XLOG_MAX_ICLOGS; if (mp->m_logbsize <= 0) mp->m_logbsize = XLOG_BIG_RECORD_BSIZE;which sets the struct
xfs_mountfields before continuing.There's a lot more going on in
xlog_get_iclog_buffer_size()so this is a very simple minded comparison on my part but the point is RHEL-8 (and I'm assuming RHEL-7 too) is different to the current xfs upstream.
Quoted 5 lines
Quoted 2 lines
Dave, can you help out please wrt. current RHEL xfs or what I'm missing here?
So I'd still like more info around this difference please Dave. Apologies for the post beer-clock intrusion, ;)
Ok, more info., first see commit 1cb51258758d7:
Author: Eric Sandeen <[email protected]> Date: Thu Aug 16 16:24:43 2007 +1000
[XFS] choose single default logbuf count & size
and then commit 4f62282a36964:
Author: Christoph Hellwig <[email protected]> Date: Fri Jun 28 19:27:20 2019 -0700
xfs: cleanup xlog_get_iclog_buffer_size
which is where the change occurred.
I think this last change is what's causing the difference in behaviour.
Quoted 403 lines
Quoted 403 lines
Quoted 403 lines
Thanks,
ZorroQuoted 399 lines
Ian
Quoted 397 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +27
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV2>/dev/null
tests/xfs/148 new file +35
-0+ fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mountpoint"
tests/xfs/148 new file +6
-0+ +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfsQuoted 1 line
$seqres.full
2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<keystring>
<key
should be found?>]tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butpass"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mountreturn
0"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butfail"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mountreturn
non-zero"tests/xfs/148 new file +5
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn'tspecified
tests/xfs/148 new file +10
-0+ if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in$info, but
not found"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in$info,
but found"tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically4KiB)
through to 1GiBtests/xfs/148 new file +6
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize""true"
+do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true"tests/xfs/148 new file +46
-0+do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8inclusive.
tests/xfs/148 new file +35
-0+do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass"logdev=$LOOP_SPARE_DEV"
"true"tests/xfs/148 new file +44
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64""true"
+do_test "-o sunit=128,swidth=128" pass
"sunit=128,swidth=128"
"true"
+do_test "-o sunit=256,swidth=256" pass
"sunit=256,swidth=256"
"true"tests/xfs/148 new file +15
-0+do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 141 lines · Ian Kent
Quoted 122 lines · Ian Kent
Quoted 88 lines · Ian Kent
Quoted 77 lines · Zorro Lang
Quoted 42 lines · Ian Kent
Quoted 7 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case to
make
sure the changing won't bring in regression issue on xfs mount
option
parse phase, and won't change some default behaviors either.I think this isn't quite right:
[root@f30 xfstests-dev]# diff -u
/home/raven/xfstests-dev/tests/xfs/148.out/home/raven/xfstests-dev/results//xfs/148.out.bad
---/home/raven/xfstests-dev/tests/xfs/148.out2019-10-24
09:27:27.304929313 +0800
+++/home/raven/xfstests-dev/results//xfs/148.out.bad2019-
10-24 10:42:40.739436223 +0800home/raven/xfstests-dev/results//xfs/148.out.bad renamed from home/raven/xfstests-dev/tests/xfs/148.out +2
-0@@ -3,4 +3,10 @@ ** create loop log device ** create loop mount point ** start xfs mount testing ... +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbufs inrw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquo ta
,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt
+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquo ta
,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt
+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquo ta
,
but not found
** end of testingQuoted 3 lines
Above logbufs and logbsize are present in the options string but
an error is reported.Oh, There're two reasons to cause this failure:
1) I made a mistake at here:if [ $rc -eq 0 ];then if [ "$found" != "true" ];then echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT$opts"
echo "ERROR: expect there's $key in
$info,
but not found"
return 1
fi
else
if [ "$found" != "false" ];then
echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
$opts"
echo "ERROR: expect there's not $key in
$info, but found"
return 1
fi
fiI should exchange the "there's" line with "there's not" line.
2) The case expect there's not "logbufs=N" or "logbsize=N" output as
default.
But your system has these two options in/proc/mountsif mount without any
options.Quoted 4 lines
Hmm... strange, I've tested this case on rhel8 and rhel7, all passed.
Where
can I reproduce this error?There's every chance this has changed along the way but the current upstream source sets these two fields to default values at some point (looks like via
xfs_mountfs()fromxfs_fs_fill_super()to me).Quoted 5 lines
So the super block op ->show_options() sees them as > 0 and prints the option in the proc output.
But I'm not so familiar with xfs so the subtleties of these options eludes me.
Oh, I see what's going on.
In, for example, RHEL-8
xlog_get_iclog_buffer_size()on entry we have:if (mp->m_logbufs <= 0) log->l_iclog_bufs = XLOG_MAX_ICLOGS; else log->l_iclog_bufs = mp->m_logbufs;which sets a struct xlog field but leaves the struct
xfs_mountalone.But upstream on entry we have:
if (mp->m_logbufs <= 0) mp->m_logbufs = XLOG_MAX_ICLOGS; if (mp->m_logbsize <= 0) mp->m_logbsize = XLOG_BIG_RECORD_BSIZE;which sets the struct
xfs_mountfields before continuing.There's a lot more going on in
xlog_get_iclog_buffer_size()so this is a very simple minded comparison on my part but the point is RHEL-8 (and I'm assuming RHEL-7 too) is different to the current xfs upstream.Quoted 5 lines
Quoted 2 lines
Dave, can you help out please wrt. current RHEL xfs or what I'm missing here?
So I'd still like more info around this difference please Dave. Apologies for the post beer-clock intrusion, ;)
Ok, more info., first see commit
1cb51258758d7:Author: Eric Sandeen <[email protected]> Date: Thu Aug 16 16:24:43 2007 +1000[XFS] choose single default logbuf count & size
and then commit
4f62282a36964:Author: Christoph Hellwig <[email protected]> Date: Fri Jun 28 19:27:20 2019 -0700
Quoted 6 lines
xfs: cleanup
xlog_get_iclog_buffer_sizewhich is where the change occurred.
I think this last change is what's causing the difference in behaviour.
Hmm... so the 'default behavior' is changed, should I tend to the lastest upstream behavior, then cause old kernel testing fail (report a bug to merge the upstream change)? Or skip this test, make it as an 'undifined' behavior?
Thanks,
Zorro
Quoted 405 lines
Quoted 404 lines
Quoted 404 lines
Quoted 404 lines
Thanks,
ZorroQuoted 399 lines
Ian
Quoted 397 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +27
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV2>/dev/null
tests/xfs/148 new file +35
-0+ fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopback mountpoint"
tests/xfs/148 new file +6
-0+ +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfsQuoted 1 line
$seqres.full
2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<keystring>
<key
should be found?>]tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butpass"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mountreturn
0"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butfail"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mountreturn
non-zero"tests/xfs/148 new file +5
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn'tspecified
tests/xfs/148 new file +10
-0+ if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in$info, but
not found"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in$info,
but found"tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically4KiB)
through to 1GiBtests/xfs/148 new file +6
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize""true"
+do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true"tests/xfs/148 new file +46
-0+do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8inclusive.
tests/xfs/148 new file +35
-0+do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass"logdev=$LOOP_SPARE_DEV"
"true"tests/xfs/148 new file +44
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true" +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64""true"
+do_test "-o sunit=128,swidth=128" pass
"sunit=128,swidth=128"
"true"
+do_test "-o sunit=256,swidth=256" pass
"sunit=256,swidth=256"
"true"tests/xfs/148 new file +15
-0+do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 166 lines · Zorro Lang
Quoted 158 lines · Ian Kent
Quoted 139 lines · Ian Kent
Quoted 102 lines · Ian Kent
Quoted 90 lines · Zorro Lang
Quoted 49 lines · Ian Kent
Quoted 9 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case
to
make
sure the changing won't bring in regression issue on xfs mount
option
parse phase, and won't change some default behaviors either.I think this isn't quite right:
[root@f30 xfstests-dev]# diff -u
/home/raven/xfstests-dev/tests/xfs/148.out/home/raven/xfstests-dev/results//xfs/148.out.bad
---/home/raven/xfstests-dev/tests/xfs/148.out2019-
10-24
09:27:27.304929313 +0800
+++/home/raven/xfstests-dev/results//xfs/148.out.bad2019-
10-24 10:42:40.739436223 +0800home/raven/xfstests-dev/results//xfs/148.out.bad renamed from home/raven/xfstests-dev/tests/xfs/148.out +2
-0@@ -3,4 +3,10 @@ ** create loop log device ** create loop mount point ** start xfs mount testing ... +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbufs inrw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,n oquo
ta
,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,n oquo
ta
,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,n oquo
ta
,
but not found
** end of testingQuoted 4 lines
Above logbufs and logbsize are present in the options string
but
an error is reported.Oh, There're two reasons to cause this failure:
1) I made a mistake at here:if [ $rc -eq 0 ];then if [ "$found" != "true" ];then echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"
echo "ERROR: expect there's $key in
$info,
but not found"
return 1
fi
else
if [ "$found" != "false" ];then
echo "[FAILED]: mount $LOOP_DEV
$LOOP_MNT
$opts"
echo "ERROR: expect there's not $key
in
$info, but found"
return 1
fi
fiI should exchange the "there's" line with "there's not" line.
2) The case expect there's not "logbufs=N" or "logbsize=N" output
as
default.
But your system has these two options in/proc/mountsif mount
without any
options.Quoted 4 lines
Hmm... strange, I've tested this case on rhel8 and rhel7, all passed.
Where
can I reproduce this error?There's every chance this has changed along the way but the current
upstream source sets these two fields to default values at some point (looks like viaxfs_mountfs()fromxfs_fs_fill_super()to me).Quoted 7 lines
So the super block op ->show_options() sees them as > 0 and prints
the option in the proc output.But I'm not so familiar with xfs so the subtleties of these options
eludes me.Oh, I see what's going on.
In, for example, RHEL-8
xlog_get_iclog_buffer_size()on entry we have:if (mp->m_logbufs <= 0) log->l_iclog_bufs = XLOG_MAX_ICLOGS; else log->l_iclog_bufs = mp->m_logbufs;which sets a struct xlog field but leaves the struct
xfs_mountalone.But upstream on entry we have:
if (mp->m_logbufs <= 0) mp->m_logbufs = XLOG_MAX_ICLOGS; if (mp->m_logbsize <= 0) mp->m_logbsize = XLOG_BIG_RECORD_BSIZE;which sets the struct
xfs_mountfields before continuing.There's a lot more going on in
xlog_get_iclog_buffer_size()so this
is a very simple minded comparison on my part but the point is RHEL-8 (and I'm assuming RHEL-7 too) is different to the current xfs upstream.Quoted 5 lines
Quoted 2 lines
Dave, can you help out please wrt. current RHEL xfs or what I'm missing here?
So I'd still like more info around this difference please Dave. Apologies for the post beer-clock intrusion, ;)
Ok, more info., first see commit
1cb51258758d7:Author: Eric Sandeen <[email protected]> Date: Thu Aug 16 16:24:43 2007 +1000[XFS] choose single default logbuf count & size
and then commit
4f62282a36964:Author: Christoph Hellwig <[email protected]> Date: Fri Jun 28 19:27:20 2019 -0700Quoted 6 lines
xfs: cleanup
xlog_get_iclog_buffer_sizewhich is where the change occurred.
I think this last change is what's causing the difference in behaviour.
Quoted 6 lines
Hmm... so the 'default behavior' is changed, should I tend to the lastest
upstream behavior, then cause old kernel testing fail (report a bug to merge
the upstream change)? Or skip this test, make it as an 'undifined' behavior?
I'm not certain but I think the file system behaviour is the much same but current upstream is simplified.
I think that a pass should be either option not present or option is present and set to default (for example logbufs=8) when the option is not given.
Not sure that's simple to do but would probably be the best way to deal with it.
I expect Dave knows what the implications of upstream changes are and sets back port priorities accordingly so I'm not sure a bug against RHEL xfs is the right way to go. And older RHEL releases are less likely change (assuming this change doesn't have serious implications) but we still need to perform QA testing on them.
Quoted 409 lines
Thanks,
ZorroQuoted 405 lines
Quoted 405 lines
Quoted 405 lines
Quoted 405 lines
Thanks,
ZorroQuoted 402 lines
Ian
Quoted 400 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +27
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5 xfs'. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV 2>/dev/null + fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV2>/dev/null
tests/xfs/148 new file +35
-0+ fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopbackmount
point"tests/xfs/148 new file +6
-0+ +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfsQuoted 1 line
$seqres.full
2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<keystring>
<key
should be found?>]tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butpass"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mounted even mountreturn
0"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted}, butfail"
tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted even mountreturn
non-zero"tests/xfs/148 new file +5
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn'tspecified
tests/xfs/148 new file +10
-0+ if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's $key in$info, but
not found"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not $key in$info,
but found"tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size (typically4KiB)
through to 1GiBtests/xfs/148 new file +6
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass "allocsize=$blsize""true"
+do_test "-o allocsize=1048576k" pass
"allocsize=1048576k"
"true"tests/xfs/148 new file +46
-0+do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8inclusive.
tests/xfs/148 new file +35
-0+do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass"logdev=$LOOP_SPARE_DEV"
"true"tests/xfs/148 new file +43
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8""true"
+do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true"
+do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128"
"true"
+do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256"
"true"tests/xfs/148 new file +15
-0+do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi
Quoted 193 lines · Ian Kent
Quoted 178 lines · Zorro Lang
Quoted 170 lines · Ian Kent
Quoted 150 lines · Ian Kent
Quoted 111 lines · Ian Kent
Quoted 96 lines · Zorro Lang
Quoted 53 lines · Ian Kent
Quoted 10 lines · Zorro Lang
XFS is changing to suit the new mount API, so add this case
to
make
sure the changing won't bring in regression issue on xfs
mount
option
parse phase, and won't change some default behaviors either.I think this isn't quite right:
[root@f30 xfstests-dev]# diff -u
/home/raven/xfstests-dev/tests/xfs/148.out/home/raven/xfstests-dev/results//xfs/148.out.bad
---/home/raven/xfstests-dev/tests/xfs/148.out2019-
10-24
09:27:27.304929313 +0800
+++/home/raven/xfstests-dev/results//xfs/148.out.bad2019-
10-24 10:42:40.739436223 +0800(quoted diff) +2
-0@@ -3,4 +3,10 @@ ** create loop log device ** create loop mount point ** start xfs mount testing ... +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt +ERROR: expect there's logbufs inrw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k ,n
oquo
ta
,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k ,n
oquo
ta
,
but not found
+[FAILED]: mount/dev/loop0/mnt/test/148.mnt+ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k ,n
oquo
ta
,
but not found
** end of testingQuoted 4 lines
Above logbufs and logbsize are present in the options string
but
an error is reported.Oh, There're two reasons to cause this failure:
1) I made a mistake at here:if [ $rc -eq 0 ];then if [ "$found" != "true" ];then echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"
echo "ERROR: expect there's $key in
$info,
but not found"
return 1
fi
else
if [ "$found" != "false" ];then
echo "[FAILED]: mount $LOOP_DEV
$LOOP_MNT
$opts"
echo "ERROR: expect there's not
$key
in
$info, but found"
return 1
fi
fiI should exchange the "there's" line with "there's not" line.
2) The case expect there's not "logbufs=N" or "logbsize=N" output
as
default.
But your system has these two options in/proc/mountsif mount
without any
options.Quoted 5 lines
Hmm... strange, I've tested this case on rhel8 and rhel7, all
passed.
Where
can I reproduce this error?There's every chance this has changed along the way but the current
upstream source sets these two fields to default values at some
point (looks like viaxfs_mountfs()fromxfs_fs_fill_super()to
me).Quoted 7 lines
So the super block op ->show_options() sees them as > 0 and prints
the option in the proc output.But I'm not so familiar with xfs so the subtleties of these options
eludes me.Oh, I see what's going on.
In, for example, RHEL-8
xlog_get_iclog_buffer_size()on entry we
have:if (mp->m_logbufs <= 0) log->l_iclog_bufs = XLOG_MAX_ICLOGS; else log->l_iclog_bufs = mp->m_logbufs;which sets a struct xlog field but leaves the struct
xfs_mountalone.But upstream on entry we have:
if (mp->m_logbufs <= 0) mp->m_logbufs = XLOG_MAX_ICLOGS; if (mp->m_logbsize <= 0) mp->m_logbsize = XLOG_BIG_RECORD_BSIZE;which sets the struct
xfs_mountfields before continuing.There's a lot more going on in
xlog_get_iclog_buffer_size()so this
is a very simple minded comparison on my part but the point is RHEL-8 (and I'm assuming RHEL-7 too) is different to the current
xfs upstream.Quoted 6 lines
Quoted 3 lines
Dave, can you help out please wrt. current RHEL xfs or what I'm
missing here?So I'd still like more info around this difference please Dave. Apologies for the post beer-clock intrusion, ;)
Ok, more info., first see commit
1cb51258758d7:Author: Eric Sandeen <[email protected]> Date: Thu Aug 16 16:24:43 2007 +1000[XFS] choose single default logbuf count & size
and then commit
4f62282a36964:Author: Christoph Hellwig <[email protected]> Date: Fri Jun 28 19:27:20 2019 -0700Quoted 6 lines
xfs: cleanup
xlog_get_iclog_buffer_sizewhich is where the change occurred.
I think this last change is what's causing the difference in behaviour.
Quoted 6 lines
Hmm... so the 'default behavior' is changed, should I tend to the lastest
upstream behavior, then cause old kernel testing fail (report a bug to merge
the upstream change)? Or skip this test, make it as an 'undifined' behavior?I'm not certain but I think the file system behaviour is the much same but current upstream is simplified.
I think that a pass should be either option not present or option is present and set to default (for example logbufs=8) when the option is not given.
Quoted 8 lines
Not sure that's simple to do but would probably be the best way to deal with it.
I expect Dave knows what the implications of upstream changes are and sets back port priorities accordingly so I'm not sure a bug against RHEL xfs is the right way to go. And older RHEL releases are less likely change (assuming this change doesn't have serious implications) but we still need to perform QA testing on them.
There's also the fact that we don't know what xfs code base people will use when running xfstests so this applies equally to upstream xfstests too.
Quoted 421 lines
Quoted 421 lines
Thanks,
ZorroQuoted 417 lines
Quoted 417 lines
Quoted 417 lines
Quoted 417 lines
Thanks,
ZorroQuoted 414 lines
Ian
Quoted 412 lines
Signed-off-by Zorro Lang <[email protected]>--- tests/xfs/148 | 315 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/148.out | 6 + tests/xfs/group | 1 + 3 files changed, 322 insertions(+) create mode 100755 tests/xfs/148 create mode 100644 tests/xfs/148.outtests/xfs/148 new file +3
-0@@ -0,0 +1,315 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All RightsReserved.
tests/xfs/148 new file +4
-0+# +# FS QA Test 148 +# +# XFS mount options sanity check, refer to 'man 5xfs'.
tests/xfs/148 new file +17
-0+# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* + $UMOUNT_PROG $LOOP_MNT 2>/dev/null + if [ -n "$LOOP_DEV" ];then + _destroy_loop_device $LOOP_DEV2>/dev/null
tests/xfs/148 new file +3
-0+ fi + if [ -n "$LOOP_SPARE_DEV" ];then + _destroy_loop_device $LOOP_SPARE_DEV2>/dev/null
tests/xfs/148 new file +35
-0+ fi + rm -f $LOOP_IMG + rm -f $LOOP_SPARE_IMG + rmdir $LOOP_MNT +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_test +_require_loop +_require_xfs_io_command "falloc" + +LOOP_IMG=$TEST_DIR/$seq.dev +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev +LOOP_MNT=$TEST_DIR/$seq.mnt + +echo "** create loop device" +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG +LOOP_DEV=`_create_loop_device $LOOP_IMG` + +echo "** create loop log device" +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG` + +echo "** create loop mount point" +rmdir $LOOP_MNT 2>/dev/null +mkdir -p $LOOP_MNT || _fail "cannot create loopbackmount
point"tests/xfs/148 new file +6
-0+ +# avoid the effection from MKFS_OPTIONS +MKFS_OPTIONS="" +do_mkfs() +{ + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfsQuoted 1 line
$seqres.full
2>$tmp.mkfs
tests/xfs/148 new file +23
-0+ if [ "${PIPESTATUS[0]}" -ne 0 ]; then + _fail "Fails on _mkfs_dev $* $LOOP_DEV" + fi + . $tmp.mkfs +} + +is_dev_mounted() +{ + findmnt --source $LOOP_DEV >/dev/null + return $? +} + +get_mount_info() +{ + findmnt --source $LOOP_DEV -o OPTIONS -n +} + +force_unmount() +{ + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1 +} + +# _do_test <mount options> <should be mounted?> [<keystring>
<key
should be found?>]tests/xfs/148 new file +15
-0+_do_test() +{ + local opts="$1" + local mounted="$2" # pass or fail + local key="$3" + local found="$4" # true or false + local rc + local info + + # mount test + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null + rc=$? + if [ $rc -eq 0 ];then + if [ "${mounted}" = "fail" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted},but
pass"tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -ne 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs not mountedeven mount
return
0"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "${mount_ret}" = "pass" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect ${mounted},but
fail"tests/xfs/148 new file +5
-0+ return 1 + fi + is_dev_mounted + if [ $? -eq 0 ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: fs is mounted evenmount
return
non-zero"tests/xfs/148 new file +5
-0+ return 1 + fi + fi + + # Skip below checking if "$key" argument isn'tspecified
tests/xfs/148 new file +10
-0+ if [ -z "$key" ];then + return 0 + fi + # Check the mount options after fs mounted. + info=`get_mount_info` + echo $info | grep -q "${key}" + rc=$? + if [ $rc -eq 0 ];then + if [ "$found" != "true" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's$key in
$info, but
not found"tests/xfs/148 new file +5
-0+ return 1 + fi + else + if [ "$found" != "false" ];then + echo "[FAILED]: mount $LOOP_DEV$LOOP_MNT
$opts"tests/xfs/148 new file +1
-0+ echo "ERROR: expect there's not$key in
$info,
but found"tests/xfs/148 new file +19
-0+ return 1 + fi + fi + + return 0 +} + +do_test() +{ + # force unmount before testing + force_unmount + _do_test "$@" + # force unmount after testing + force_unmount +} + +echo "** start xfs mount testing ..." +# Test allocsize=size +# Valid values for this option are page size(typically
4KiB)
through to 1GiBtests/xfs/148 new file +6
-0+do_mkfs +if [ $dbsize -ge 1024 ];then + blsize="$((dbsize / 1024))k" +fi +do_test "" pass "allocsize" "false" +do_test "-o allocsize=$blsize" pass"allocsize=$blsize"
"true"
+do_test "-o allocsize=1048576k" pass
"allocsize=1048576k"
"true"tests/xfs/148 new file +46
-0+do_test "-o allocsize=$((dbsize / 2))" fail +do_test "-o allocsize=2g" fail + +# Test attr2 +do_mkfs -m crc=1 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" fail +do_mkfs -m crc=0 +do_test "" pass "attr2" "true" +do_test "-o attr2" pass "attr2" "true" +do_test "-o noattr2" pass "attr2" "false" + +# Test discard +do_mkfs +do_test "" pass "discard" "false" +do_test "-o discard" pass "discard" "true" +do_test "-o nodiscard" pass "discard" "false" + +# Test grpid|bsdgroups|nogrpid|sysvgroups +do_test "" pass "grpid" "false" +do_test "-o grpid" pass "grpid" "true" +do_test "-o bsdgroups" pass "grpid" "true" +do_test "-o nogrpid" pass "grpid" "false" +do_test "-o sysvgroups" pass "grpid" "false" + +# Test filestreams +do_test "" pass "filestreams" "false" +do_test "-o filestreams" pass "filestreams" "true" + +# Test ikeep +do_test "" pass "ikeep" "false" +do_test "-o ikeep" pass "ikeep" "true" +do_test "-o noikeep" pass "ikeep" "false" + +# Test inode32|inode64 +do_test "" pass "inode64" "true" +do_test "-o inode32" pass "inode32" "true" +do_test "-o inode64" pass "inode64" "true" + +# Test largeio +do_test "" pass "largeio" "false" +do_test "-o largeio" pass "largeio" "true" +do_test "-o nolargeio" pass "largeio" "false" + +# Test logbufs=value. Valid numbers range from 2–8inclusive.
tests/xfs/148 new file +35
-0+do_test "" pass "logbufs" "false" +do_test "-o logbufs=8" pass "logbufs=8" "true" +do_test "-o logbufs=2" pass "logbufs=2" "true" +do_test "-o logbufs=1" fail +###### but it gets logbufs=8 now, why? bug? ####### +# do_test "-o logbufs=0" fail +do_test "-o logbufs=9" fail +do_test "-o logbufs=99999999999999" fail + +# Test logbsize=value. +do_mkfs -m crc=1 -l version=2 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" pass "logbsize=64k" "true" +do_test "-o logbsize=128k" pass "logbsize=128k" "true" +do_test "-o logbsize=256k" pass "logbsize=256k" "true" +do_test "-o logbsize=8k" fail +do_test "-o logbsize=512k" fail +####### it's invalid, but it set to default size 32k +# do_test "-o logbsize=0" false +do_mkfs -m crc=0 -l version=1 +do_test "" pass "logbsize" "false" +do_test "-o logbsize=16384" pass "logbsize=16k" "true" +do_test "-o logbsize=16k" pass "logbsize=16k" "true" +do_test "-o logbsize=32k" pass "logbsize=32k" "true" +do_test "-o logbsize=64k" fail + +# Test logdev +do_mkfs +do_test "" pass "logdev" "false" +do_test "-o logdev=$LOOP_SPARE_DEV" fail +do_mkfs -l logdev=$LOOP_SPARE_DEV +do_test "-o logdev=$LOOP_SPARE_DEV" pass"logdev=$LOOP_SPARE_DEV"
"true"tests/xfs/148 new file +43
-0+do_test "" fail + +# Test noalign +do_mkfs +do_test "" pass "noalign" "false" +do_test "-o noalign" pass "noalign" "true" + +# Test norecovery +do_test "" pass "norecovery" "false" +do_test "-o norecovery,ro" pass "norecovery" "true" +do_test "-o norecovery" fail + +# Test nouuid +do_test "" pass "nouuid" "false" +do_test "-o nouuid" pass "nouuid" "true" + +# Test noquota +do_test "" pass "noquota" "true" +do_test "-o noquota" pass "noquota" "true" + +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce +do_test "" pass "usrquota" "false" +do_test "-o uquota" pass "usrquota" "true" +do_test "-o usrquota" pass "usrquota" "true" +do_test "-o quota" pass "usrquota" "true" +do_test "-o uqnoenforce" pass "usrquota" "true" +do_test "-o qnoenforce" pass "usrquota" "true" + +# Test gquota/grpquota/gqnoenforce +do_test "" pass "grpquota" "false" +do_test "-o gquota" pass "grpquota" "true" +do_test "-o grpquota" pass "grpquota" "true" +do_test "-o gqnoenforce" pass "gqnoenforce" "true" + +# Test pquota/prjquota/pqnoenforce +do_test "" pass "prjquota" "false" +do_test "-o pquota" pass "prjquota" "true" +do_test "-o prjquota" pass "prjquota" "true" +do_test "-o pqnoenforce" pass "pqnoenforce" "true" + +# Test sunit=value and swidth=value +do_mkfs -d sunit=128,swidth=128 +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8""true"
+do_test "-o sunit=8,swidth=64" pass
"sunit=8,swidth=64"
"true"
+do_test "-o sunit=128,swidth=128" pass
"sunit=128,swidth=128"
"true"
+do_test "-o sunit=256,swidth=256" pass
"sunit=256,swidth=256"
"true"tests/xfs/148 new file +15
-0+do_test "-o sunit=2,swidth=2" fail + +# Test swalloc +do_mkfs +do_test "" pass "swalloc" "false" +do_test "-o swalloc" pass "swalloc" "true" + +# Test wsync +do_test "" pass "wsync" "false" +do_test "-o wsync" pass "wsync" "true" + +echo "** end of testing" +# success, all done +status=0 +exittests/xfs/148.out new file +6
-0@@ -0,0 +1,6 @@ +QA output created by 148 +** create loop device +** create loop log device +** create loop mount point +** start xfs mount testing ... +** end of testingtests/xfs/group +1
-0@@ -145,6 +145,7 @@ 145 dmapi 146 dmapi 147 dmapi +148 auto quick mount 150 dmapi 151 dmapi 152 dmapi