make bdrv_get_block_status byte-based
v2 cover make bdrv_get_block_status byte-based
There are patches floating around to add NBD_CMD_BLOCK_STATUS, but NBD wants to report status on byte granularity (even if the reporting will probably be naturally aligned to sectors or even much higher levels). I've therefore started the task of converting our block status code to report at a byte granularity rather than sectors.
The overall conversion currently looks like:
part 1: bdrv_is_allocated (v3 is reviewed [1], modulo vvfat whitespace changes) part 2: dirty-bitmap (v4 is posted [2]; v2 was reviewed but rebase changes mean more review is needed)
part 3: this series, for bdrv_get_block_status (first half of v1, at [3], did not get much review)
part 4: upcoming series, for .bdrv_co_block_status (second half of v1 [3])
Available as a tag at:
git fetch git://repo.or.cz/qemu/ericb.git nbd-byte-status-v2
It is based on the union of Max's and Kevin's block branches, plus posted fixes that make iotest 55 pass.
The diffstat shows a net growth in line count, but some of that is due to better comments, and some because the code is a bit longer in order to handle differing alignments between caller and driver.
I still haven't felt like tackling the task of rewriting migration/block.c and qemu-img.c to use bytes (instead of sectors) everywhere - that might give another net win in lines of code and legibility.
Patch 1/15 isn't really mine; Manos will probably be posting a v3 of his series, which should be committed before mine [4].
[1] https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg06077.html
[2] https://lists.gnu.org/archive/html/qemu-devel/2017-07/msg00269.html
[3] https://lists.gnu.org/archive/html/qemu-devel/2017-04/msg02642.html
[4] https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg06846.html
Since v1: rebase against lots of upstream churn; add patches to support arbitrary alignments and test them. I also split the original v1 series (31 patches) into two halves, where teaching the individual drivers about byte-level granularity is now going to be a fourth series (I'll post a 16/15 RFC patch to show the interface that will use)
001/15:[down] 'block: add default implementations for bdrv_co_get_block_status()' 002/15:[down] 'block: Allow NULL file for bdrv_get_block_status()' 003/15:[down] 'block: Add flag to avoid wasted work in bdrv_is_allocated()' 004/15:[0002] [FC] 'block: Make bdrv_round_to_clusters() signature more useful' 005/15:[0018] [FC] 'qcow2: Switch is_zero_sectors() to byte-based' 006/15:[0004] [FC] 'block: Switch bdrv_make_zero() to byte-based' 007/15:[----] [--] 'qemu-img: Switch get_block_status() to byte-based' 008/15:[0058] [FC] 'block: Convert bdrv_get_block_status() to bytes' 009/15:[0064] [FC] 'block: Switch bdrv_co_get_block_status() to byte-based' 010/15:[0001] [FC] 'block: Switch BdrvCoGetBlockStatusData to byte-based' 011/15:[down] 'block: Switch bdrv_common_block_status_above() to byte-based' 012/15:[0010] [FC] 'block: Switch bdrv_co_get_block_status_above() to byte-based' 013/15:[0063] [FC] 'block: Convert bdrv_get_block_status_above() to bytes' 014/15:[down] 'block: Align block status requests'
015/15:[down] 'qemu-io: Relax 'alloc' now that block-status doesn't assert'
Eric Blake (14):
block: Allow NULL file for bdrv_get_block_status()
block: Add flag to avoid wasted work in bdrv_is_allocated()
block: Make bdrv_round_to_clusters() signature more useful
qcow2: Switch is_zero_sectors() to byte-based
block: Switch bdrv_make_zero() to byte-based
qemu-img: Switch get_block_status() to byte-based
block: Convert bdrv_get_block_status() to bytes
block: Switch bdrv_co_get_block_status() to byte-based
block: Switch BdrvCoGetBlockStatusData to byte-based
block: Switch bdrv_common_block_status_above() to byte-based
block: Switch bdrv_co_get_block_status_above() to byte-based
block: Convert bdrv_get_block_status_above() to bytes
block: Align block status requests
qemu-io: Relax 'alloc' now that block-status doesn't assert
Manos Pitsidianakis (1):
block: add default implementations for bdrv_co_get_block_status()
include/block/block.h | 26 ++-- include/block/block_int.h | 27 +++- block/blkdebug.c | 9 +- block/commit.c | 12 +- block/io.c | 302 ++++++++++++++++++++++++++++----------------- block/mirror.c | 32 ++--- block/qcow2-cluster.c | 2 +- block/qcow2.c | 34 ++--- qemu-img.c | 71 ++++++----- qemu-io-cmds.c | 13 -- block/trace-events | 2 +- tests/qemu-iotests/177 | 11 +- tests/qemu-iotests/177.out | 18 ++- 13 files changed, 317 insertions(+), 242 deletions(-)
Signature · 1 line
2.9.4
PATCH v2 1/15 block: add default implementations for bdrv_co_get_block_status()
From: Manos Pitsidianakis <[email protected]>
bdrv_co_get_block_status_from_file() and bdrv_co_get_block_status_from_backing() set *file to bs->file and bs->backing respectively, so that bdrv_co_get_block_status() can recurse to them. Future block drivers won't have to duplicate code to implement this.
Message-Id: <[email protected]>
---
v2: Including this patch from Manos, since it affects my later patches; however, I anticipate that we will get a full v3 series from Manos merged first
--- include/block/block_int.h | 16 ++++++++++++++++ block/blkdebug.c | 12 +----------- block/commit.c | 12 +----------- block/io.c | 24 ++++++++++++++++++++++++ block/mirror.c | 12 +----------- 5 files changed, 43 insertions(+), 33 deletions(-)
include/block/block_int.h +16 -0
@@ -958,6 +958,22 @@ void bdrv_format_default_perms(BlockDriverState *bs, BdrvChild *c, uint64_t perm, uint64_t shared, uint64_t *nperm, uint64_t *nshared); +/* +* Default implementation for drivers to pass bdrv_co_get_block_status() to +* their file +* */ +int64_t coroutine_fn bdrv_co_get_block_status_from_file(BlockDriverState *bs, +int64_t sector_num, +int nb_sectors,int *pnum, +BlockDriverState **file); +/* +* Default implementation for drivers to pass bdrv_co_get_block_status() to +* their backing file +* */ +int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs, +int64_t sector_num, +int nb_sectors,int *pnum, +BlockDriverState **file);const char *bdrv_get_parent_name (const BlockDriverState *bs);void blk_dev_change_media_cb (BlockBackend *blk,bool load,Error **errp);bool blk_dev_has_removable_media (BlockBackend *blk);
block/blkdebug.c +1 -11
@@ -641,16 +641,6 @@ static int coroutine_fn blkdebug_co_pdiscard(BlockDriverState *bs,return bdrv_co_pdiscard (bs->file->bs, offset, bytes); } -static int64_t coroutine_fn blkdebug_co_get_block_status( -BlockDriverState *bs,int64_t sector_num,int nb_sectors,int *pnum, -BlockDriverState **file) -{ - *pnum = nb_sectors; - *file = bs->file->bs; -return BDRV_BLOCK_RAW |BDRV_BLOCK_OFFSET_VALID | - (sector_num <<BDRV_SECTOR_BITS ); -} -static void blkdebug_close (BlockDriverState *bs) {BDRVBlkdebugState *s = bs->opaque;
@@ -925,7 +915,7 @@ static BlockDriver bdrv_blkdebug = { .bdrv_co_flush_to_disk = blkdebug_co_flush, .bdrv_co_pwrite_zeroes = blkdebug_co_pwrite_zeroes, .bdrv_co_pdiscard = blkdebug_co_pdiscard, - .bdrv_co_get_block_status = blkdebug_co_get_block_status, + .bdrv_co_get_block_status = bdrv_co_get_block_status_from_file, .bdrv_debug_event = blkdebug_debug_event, .bdrv_debug_breakpoint = blkdebug_debug_breakpoint,
block/commit.c +1 -11
@@ -242,16 +242,6 @@ static int coroutine_fn bdrv_commit_top_preadv(BlockDriverState *bs,return bdrv_co_preadv (bs->backing, offset, bytes, qiov, flags); } -static int64_t coroutine_fn bdrv_commit_top_get_block_status( -BlockDriverState *bs,int64_t sector_num,int nb_sectors,int *pnum, -BlockDriverState **file) -{ - *pnum = nb_sectors; - *file = bs->backing->bs; -return BDRV_BLOCK_RAW |BDRV_BLOCK_OFFSET_VALID | - (sector_num <<BDRV_SECTOR_BITS ); -} -static void bdrv_commit_top_refresh_filename (BlockDriverState *bs,QDict *opts) {bdrv_refresh_filename (bs->backing->bs);
@@ -277,7 +267,7 @@ static void bdrv_commit_top_child_perm(BlockDriverState *bs, BdrvChild *c,static BlockDriver bdrv_commit_top = { .format_name ="commit_top" , .bdrv_co_preadv = bdrv_commit_top_preadv, - .bdrv_co_get_block_status = bdrv_commit_top_get_block_status, + .bdrv_co_get_block_status = bdrv_co_get_block_status_from_backing, .bdrv_refresh_filename = bdrv_commit_top_refresh_filename, .bdrv_close = bdrv_commit_top_close, .bdrv_child_perm = bdrv_commit_top_child_perm,
block/io.c +24 -0
@@ -1689,6 +1689,30 @@ typedef struct BdrvCoGetBlockStatusData {bool done; } BdrvCoGetBlockStatusData; +int64_t coroutine_fn bdrv_co_get_block_status_from_file(BlockDriverState *bs, +int64_t sector_num, +int nb_sectors,int *pnum, +BlockDriverState **file) +{ +assert (bs->file && bs->file->bs); + *pnum = nb_sectors; + *file = bs->file->bs; +return BDRV_BLOCK_RAW |BDRV_BLOCK_OFFSET_VALID | + (sector_num <<BDRV_SECTOR_BITS ); +} + +int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs, +int64_t sector_num, +int nb_sectors,int *pnum, +BlockDriverState **file) +{ +assert (bs->backing && bs->backing->bs); + *pnum = nb_sectors; + *file = bs->backing->bs; +return BDRV_BLOCK_RAW |BDRV_BLOCK_OFFSET_VALID | + (sector_num <<BDRV_SECTOR_BITS ); +} +/* * Returns the allocation status of the specified sectors. * Drivers not implementing the functionality are assumed to not support
block/mirror.c +1 -11
@@ -1043,16 +1043,6 @@ static int coroutine_fn bdrv_mirror_top_flush(BlockDriverState *bs)return bdrv_co_flush (bs->backing->bs); } -static int64_t coroutine_fn bdrv_mirror_top_get_block_status( -BlockDriverState *bs,int64_t sector_num,int nb_sectors,int *pnum, -BlockDriverState **file) -{ - *pnum = nb_sectors; - *file = bs->backing->bs; -return BDRV_BLOCK_RAW |BDRV_BLOCK_OFFSET_VALID | - (sector_num <<BDRV_SECTOR_BITS ); -} - static int coroutine_fn bdrv_mirror_top_pwrite_zeroes(BlockDriverState *bs,int64_t offset,int bytes,BdrvRequestFlags flags) {
@@ -1099,7 +1089,7 @@ static BlockDriver bdrv_mirror_top = { .bdrv_co_pwrite_zeroes = bdrv_mirror_top_pwrite_zeroes, .bdrv_co_pdiscard = bdrv_mirror_top_pdiscard, .bdrv_co_flush = bdrv_mirror_top_flush, - .bdrv_co_get_block_status = bdrv_mirror_top_get_block_status, + .bdrv_co_get_block_status = bdrv_co_get_block_status_from_backing, .bdrv_refresh_filename = bdrv_mirror_top_refresh_filename, .bdrv_close = bdrv_mirror_top_close, .bdrv_child_perm = bdrv_mirror_top_child_perm,
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 01/15] block: add default implementations for bdrv_co_get_block_status()
Quoted 11 lines · Eric Blake
From: Manos Pitsidianakis <[email protected]>
bdrv_co_get_block_status_from_file()andbdrv_co_get_block_status_from_backing()set *file tobs->fileandbs->backingrespectively, so thatbdrv_co_get_block_status()can recurse to them. Future block drivers won't have to duplicate code to implement this.Reviewed-by Stefan Hajnoczi <[email protected]>Signed-off-by Manos Pitsidianakis <[email protected]>Message-Id: <[email protected]>
Re: [Qemu-devel] [PATCH v2 01/15] block: add default implementations for bdrv_co_get_block_status()
In reply to Eric BlakeQuoted 8 lines · Eric Blake
From: Manos Pitsidianakis <[email protected]>
bdrv_co_get_block_status_from_file()andbdrv_co_get_block_status_from_backing()set *file tobs->fileandbs->backingrespectively, so thatbdrv_co_get_block_status()can recurse to them. Future block drivers won't have to duplicate code to implement this.
Quoted 4 lines
Reviewed-by Stefan Hajnoczi <[email protected]>Signed-off-by Manos Pitsidianakis <[email protected]>Message-Id: <[email protected]>
Missing my Signed-off-by if we take this one in isolation through my series, and still awaiting resolution on what will happen to the rest of his series (v3 had some valid review comments that still need addressing)
Quoted 4 lines
---
v2: Including this patch from Manos, since it affects my later patches; however, I anticipate that we will get a full v3 series from Manos merged first
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3266 Virtualization: qemu.org | libvirt.org
PATCH v2 2/15 block: Allow NULL file for bdrv_get_block_status()
In reply to Eric BlakeNot all callers care about which BDS owns the mapping for a given range of the file. This patch merely simplifies the callers by consolidating the logic in the common call point, while guaranteeing a non-NULL file to all the driver callbacks, for no semantic change. The only caller that does not care about pnum is bdrv_is_allocated, as invoked by vvfat; we can likewise add assertions that the rest of the stack does not have to worry about a NULL pnum.
Furthermore, this will also set the stage for a future cleanup: when a caller does not care about which BDS owns an offset, it would be nice to allow the driver to optimize things to not have to return BDRV_BLOCK_OFFSET_VALID in the first place. In the case of fragmented allocation (for example, it's fairly easy to create a qcow2 image where consecutive guest addresses are not at consecutive host addresses), the current contract requires bdrv_get_block_status() to clamp *pnum to the limit where host addresses are no longer consecutive, but allowing a NULL file means that *pnum could be set to the full length of known-allocated data.
---
v2: use local variable and final transfer, rather than assignment
of parameter to local
[previously in different series]:
v2: new patch, https://lists.gnu.org/archive/html/qemu-devel/2017-05/msg05645.html
--- include/block/block_int.h | 10 ++++++---- block/io.c | 44 ++++++++++++++++++++++++++++---------------- block/mirror.c | 3 +-- block/qcow2.c | 4 +--- qemu-img.c | 10 ++++------ 5 files changed, 40 insertions(+), 31 deletions(-)
include/block/block_int.h +6 -4
@@ -168,10 +168,12 @@ struct BlockDriver { int64_t offset, int bytes);/* -* Building block for bdrv_block_status[_above]. The driver should -* answer only according to the current layer, and should not -* set BDRV_BLOCK_ALLOCATED, but may set BDRV_BLOCK_RAW. See block.h -* for the meaning of _DATA, _ZERO, and _OFFSET_VALID. +* Building block for bdrv_block_status[_above] and +* bdrv_is_allocated[_above]. The driver should answer only +* according to the current layer, and should not set +* BDRV_BLOCK_ALLOCATED, but may set BDRV_BLOCK_RAW. See block.h +* for the meaning of _DATA, _ZERO, and _OFFSET_VALID. The block +* layer guarantees non-NULL pnum and file. */ int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs, int64_t sector_num, int nb_sectors, int *pnum,
block/io.c +28 -16
122 lines not on this page · raw message
block/mirror.c +1 -2
@@ -391,7 +391,6 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)int io_sectors;unsigned int io_bytes;int64_t io_bytes_acct; -BlockDriverState *file;enum MirrorMethod {MIRROR_METHOD_COPY ,MIRROR_METHOD_ZERO ,
@@ -402,7 +401,7 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s) ret =bdrv_get_block_status_above (source,NULL , offset >>BDRV_SECTOR_BITS , nb_chunks * sectors_per_chunk, - &io_sectors, &file); + &io_sectors,NULL ); io_bytes = io_sectors *BDRV_SECTOR_SIZE ;if (ret <0 ) { io_bytes =MIN (nb_chunks * s->granularity, max_io_bytes);
block/qcow2.c +1 -3
@@ -2909,7 +2909,6 @@ static bool is_zero_sectors(BlockDriverState *bs, int64_t start, uint32_t count) {int nr; -BlockDriverState *file;int64_t res;if (start + count > bs->total_sectors) {
@@ -2919,8 +2918,7 @@ static bool is_zero_sectors(BlockDriverState *bs, int64_t start,if (!count) {return true; } - res =bdrv_get_block_status_above (bs,NULL , start, count, - &nr, &file); + res =bdrv_get_block_status_above (bs,NULL , start, count, &nr,NULL );return res >=0 && (res &BDRV_BLOCK_ZERO ) && nr == count; }
qemu-img.c +4 -6
@@ -1373,7 +1373,6 @@ static int img_compare(int argc, char **argv)for (;;) {int64_t status1, status2; -BlockDriverState *file; nb_sectors =sectors_to_process (total_sectors, sector_num);if (nb_sectors <=0 ) {
@@ -1381,7 +1380,7 @@ static int img_compare(int argc, char **argv) } status1 =bdrv_get_block_status_above (bs1,NULL , sector_num, total_sectors1 - sector_num, - &pnum1, &file); + &pnum1,NULL );if (status1 <0 ) { ret =3 ;error_report ("Sector allocation test failed for %s" , filename1);
@@ -1391,7 +1390,7 @@ static int img_compare(int argc, char **argv) status2 =bdrv_get_block_status_above (bs2,NULL , sector_num, total_sectors2 - sector_num, - &pnum2, &file); + &pnum2,NULL );if (status2 <0 ) { ret =3 ;error_report ("Sector allocation test failed for %s" , filename2);
@@ -1594,15 +1593,14 @@ static int convert_iteration_sectors(ImgConvertState *s, int64_t sector_num) n =MIN (s->total_sectors - sector_num,BDRV_REQUEST_MAX_SECTORS );if (s->sector_next_status <= sector_num) { -BlockDriverState *file;if (s->target_has_backing) { ret =bdrv_get_block_status (blk_bs (s->src[src_cur]), sector_num - src_cur_offset, - n, &n, &file); + n, &n,NULL ); }else { ret =bdrv_get_block_status_above (blk_bs (s->src[src_cur]),NULL , sector_num - src_cur_offset, - n, &n, &file); + n, &n,NULL ); }if (ret <0 ) {return ret;
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 02/15] block: Allow NULL file for bdrv_get_block_status()
Quoted 19 lines · Eric Blake
Not all callers care about which BDS owns the mapping for a given range of the file. This patch merely simplifies the callers by consolidating the logic in the common call point, while guaranteeing a non-NULL file to all the driver callbacks, for no semantic change. The only caller that does not care about pnum is
bdrv_is_allocated, as invoked by vvfat; we can likewise add assertions that the rest of the stack does not have to worry about a NULL pnum.Furthermore, this will also set the stage for a future cleanup: when a caller does not care about which BDS owns an offset, it would be nice to allow the driver to optimize things to not have to return
BDRV_BLOCK_OFFSET_VALIDin the first place. In the case of fragmented allocation (for example, it's fairly easy to create a qcow2 image where consecutive guest addresses are not at consecutive host addresses), the current contract requiresbdrv_get_block_status()to clamp *pnum to the limit where host addresses are no longer consecutive, but allowing a NULL file means that *pnum could be set to the full length of known-allocated data.
Quoted 1 line
Signed-off-by Eric Blake <[email protected]>
PATCH v2 3/15 block: Add flag to avoid wasted work in bdrv_is_allocated()
In reply to Eric BlakeNot all callers care about which BDS owns the mapping for a given range of the file. In particular, bdrv_is_allocated() cares more about finding the largest run of allocated data from the guest perspective, whether or not that data is consecutive from the host perspective. Therefore, doing subsequent refinements such as checking how much of the format-layer allocation also satisfies BDRV_BLOCK_ZERO at the protocol layer is wasted work - in the best case, it just costs extra CPU cycles during a single bdrv_is_allocated(), but in the worst case, it results in a smaller *pnum, and forces callers to iterate through more status probes when visiting the entire file for even more extra CPU cycles.
This patch only optimizes the block layer. But subsequent patches will tweak the driver callback to be byte-based, and in the process, can also pass this hint through to the driver.
---
v2: new patch
--- block/io.c | 51 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 14 deletions(-)
block/io.c +37 -14
@@ -1685,6 +1685,7 @@ typedef struct BdrvCoGetBlockStatusData {int nb_sectors;int *pnum;int64_t ret; +bool allocation;bool done; } BdrvCoGetBlockStatusData;
@@ -1717,6 +1718,10 @@ int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,* Drivers not implementing the functionality are assumed to not support * backing files, hence all their sectors are reported as allocated. * +* If 'allocation' is true, the caller only cares about allocation +* status; this is a hint that a larger 'pnum' result is more +* important than including BDRV_BLOCK_OFFSET_VALID in the return. +* * If 'sector_num' is beyond the end of the disk image the return value is * BDRV_BLOCK_EOF and 'pnum' is set to 0. *
@@ -1733,6 +1738,7 @@ int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,* is allocated in. */ static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, +bool allocation,int64_t sector_num,int nb_sectors,int *pnum,BlockDriverState **file)
@@ -1791,14 +1797,15 @@ static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,if (ret &BDRV_BLOCK_RAW ) {assert (ret &BDRV_BLOCK_OFFSET_VALID && local_file); - ret =bdrv_co_get_block_status (local_file, ret >>BDRV_SECTOR_BITS , + ret =bdrv_co_get_block_status (local_file, allocation, + ret >>BDRV_SECTOR_BITS , *pnum, pnum, &local_file); goto out; }if (ret & (BDRV_BLOCK_DATA |BDRV_BLOCK_ZERO )) { ret |=BDRV_BLOCK_ALLOCATED ; - }else { + }else if (!allocation) {if (bdrv_unallocated_blocks_are_zero (bs)) { ret |=BDRV_BLOCK_ZERO ; }else if (bs->backing) {
@@ -1810,12 +1817,13 @@ static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, } } -if (local_file && local_file != bs && +if (!allocation && local_file && local_file != bs && (ret &BDRV_BLOCK_DATA ) && !(ret &BDRV_BLOCK_ZERO ) && (ret &BDRV_BLOCK_OFFSET_VALID )) {int file_pnum; - ret2 =bdrv_co_get_block_status (local_file, ret >>BDRV_SECTOR_BITS , + ret2 =bdrv_co_get_block_status (local_file, true, + ret >>BDRV_SECTOR_BITS , *pnum, &file_pnum,NULL );if (ret2 >=0 ) {/* Ignore errors. This is just providing extra information, it
@@ -1850,6 +1858,7 @@ out: static int64_t coroutine_fn bdrv_co_get_block_status_above(BlockDriverState *bs, BlockDriverState *base, + bool allocation, int64_t sector_num, int nb_sectors, int *pnum,
@@ -1861,7 +1870,8 @@ static int64_t coroutine_fn bdrv_co_get_block_status_above(BlockDriverState *bs,assert (bs != base);for (p = bs; p != base; p =backing_bs (p)) { - ret =bdrv_co_get_block_status (p, sector_num, nb_sectors, pnum, file); + ret =bdrv_co_get_block_status (p, allocation, sector_num, nb_sectors, + pnum, file);if (ret <0 ) {break ; }
@@ -1891,6 +1901,7 @@ static void coroutine_fn bdrv_get_block_status_above_co_entry(void *opaque)BdrvCoGetBlockStatusData *data = opaque; data->ret = bdrv_co_get_block_status_above(data->bs, data->base, + data->allocation, data->sector_num, data->nb_sectors, data->pnum,
@@ -1903,11 +1914,12 @@ static void coroutine_fn bdrv_get_block_status_above_co_entry(void *opaque)* * See bdrv_co_get_block_status_above() for details. */ -int64_t bdrv_get_block_status_above (BlockDriverState *bs, -BlockDriverState *base, -int64_t sector_num, -int nb_sectors,int *pnum, -BlockDriverState **file) +static int64_t bdrv_common_block_status_above (BlockDriverState *bs, +BlockDriverState *base, +bool allocation, +int64_t sector_num, +int nb_sectors,int *pnum, +BlockDriverState **file) {Coroutine *co;BdrvCoGetBlockStatusData data = {
@@ -1917,6 +1929,7 @@ int64_t bdrv_get_block_status_above(BlockDriverState *bs, .sector_num = sector_num, .nb_sectors = nb_sectors, .pnum = pnum, + .allocation = allocation, .done = false, };
@@ -1932,6 +1945,16 @@ int64_t bdrv_get_block_status_above(BlockDriverState *bs,return data.ret; } +int64_t bdrv_get_block_status_above (BlockDriverState *bs, +BlockDriverState *base, +int64_t sector_num, +int nb_sectors,int *pnum, +BlockDriverState **file) +{ +return bdrv_common_block_status_above (bs, base, false, sector_num, + nb_sectors, pnum, file); +} + int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num, int nb_sectors, int *pnum,
@@ -1944,16 +1967,16 @@ int64_t bdrv_get_block_status(BlockDriverState *bs, int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t offset,int64_t bytes,int64_t *pnum) { -int64_t sector_num = offset >>BDRV_SECTOR_BITS ; -int nb_sectors = bytes >>BDRV_SECTOR_BITS ;int64_t ret;int psectors;assert (QEMU_IS_ALIGNED (offset,BDRV_SECTOR_SIZE ));assert (QEMU_IS_ALIGNED (bytes,BDRV_SECTOR_SIZE ) && bytes <INT_MAX *BDRV_SECTOR_SIZE ); - ret =bdrv_get_block_status (bs, sector_num, nb_sectors, &psectors, -NULL ); + ret =bdrv_common_block_status_above (bs,backing_bs (bs), true, + offset >>BDRV_SECTOR_BITS , + bytes >>BDRV_SECTOR_BITS , &psectors, +NULL );if (ret <0 ) {return ret; }
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 03/15] block: Add flag to avoid wasted work in bdrv_is_allocated()
block/io.c int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs, · line 1724
Quoted 8 lines · Eric Blake
block/io.c +4
-0@@ -1717,6 +1718,10 @@ int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,* Drivers not implementing the functionality are assumed to not support * backing files, hence all their sectors are reported as allocated. * +* If 'allocation' is true, the caller only cares about allocation +* status; this is a hint that a larger 'pnum' result is more +* important than including BDRV_BLOCK_OFFSET_VALID in the return. +*
This is slightly unintuitive. I would guess "allocation == false" means "I don't care about the allocation status" but it actually is "I don't care about the consecutiveness". The "only" semantics is missing in the parameter name.
Maybe rename it to "consecutive" and invert the logic? I.e. "consecutive == true" means BDRV_BLOCK_OFFSET_VALID is wanted.
Sorry for bikeshedding.
Fam
Re: [Qemu-devel] [PATCH v2 03/15] block: Add flag to avoid wasted work in bdrv_is_allocated()
Quoted 14 lines · Fam Zheng
block/io.c int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs, · line 1724
Quoted 8 lines · Eric Blake
block/io.c +4
-0@@ -1717,6 +1718,10 @@ int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,* Drivers not implementing the functionality are assumed to not support * backing files, hence all their sectors are reported as allocated. * +* If 'allocation' is true, the caller only cares about allocation +* status; this is a hint that a larger 'pnum' result is more +* important than including BDRV_BLOCK_OFFSET_VALID in the return. +* This is slightly unintuitive. I would guess "allocation == false" means "I don't care about the allocation status" but it actually is "I don't care about the consecutiveness". The "only" semantics is missing in the parameter name.
Quoted 2 lines
Maybe rename it to "consecutive" and invert the logic? I.e. "consecutive == true" means
BDRV_BLOCK_OFFSET_VALIDis wanted.
Reasonable idea; other [shorter] names I've been toying with:
strict
mapping
precise
any of which, if true (set true by bdrv_get_block_status), means that I care more about BDRV_BLOCK_OFFSET_VALID and validity for learning host offsets, if false it means I'm okay getting a larger *pnum even if it extends over disjoint host offsets; or:
fast
which if true (set true by bdrv_is_allocated) means I want a larger *pnum even if I have to sacrifice accuracy by omitting BDRV_BLOCK_OFFSET_VALID, because I'm trying to reduce effort spent.
Quoted 2 lines
Sorry for bikeshedding.
Not a problem, I also had some double-takes in writing my own code trying to remember which way I wanted the 'allocation' boolean to be set, so coming up with a more intuitive name/default state in order to help legibility is worth it. Do any of my above suggestions sound better?
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3266 Virtualization: qemu.org | libvirt.org
Re: [Qemu-devel] [PATCH v2 03/15] block: Add flag to avoid wasted work in bdrv_is_allocated()
Quoted 35 lines · Eric Blake
Quoted 14 lines · Fam Zheng
block/io.c int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs, · line 1724
Quoted 8 lines · Eric Blake
block/io.c +4
-0@@ -1717,6 +1718,10 @@ int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,* Drivers not implementing the functionality are assumed to not support * backing files, hence all their sectors are reported as allocated. * +* If 'allocation' is true, the caller only cares about allocation +* status; this is a hint that a larger 'pnum' result is more +* important than including BDRV_BLOCK_OFFSET_VALID in the return. +* This is slightly unintuitive. I would guess "allocation == false" means "I don't care about the allocation status" but it actually is "I don't care about the consecutiveness". The "only" semantics is missing in the parameter name.
Quoted 2 lines
Maybe rename it to "consecutive" and invert the logic? I.e. "consecutive == true" means
BDRV_BLOCK_OFFSET_VALIDis wanted.Reasonable idea; other [shorter] names I've been toying with:
strict
mapping
preciseany of which, if true (set true by
bdrv_get_block_status), means that I care more aboutBDRV_BLOCK_OFFSET_VALIDand validity for learning host offsets, if false it means I'm okay getting a larger *pnum even if it extends over disjoint host offsets; or:fast
which if true (set true by
bdrv_is_allocated) means I want a larger *pnum even if I have to sacrifice accuracy by omittingBDRV_BLOCK_OFFSET_VALID, because I'm trying to reduce effort spent.Quoted 1 line
Quoted 7 lines
Quoted 1 line
Sorry for bikeshedding.
Not a problem, I also had some double-takes in writing my own code trying to remember which way I wanted the 'allocation' boolean to be set, so coming up with a more intuitive name/default state in order to help legibility is worth it. Do any of my above suggestions sound better?
I'd vote for "mapping" because it has a close connection with offset (as in BDRV_BLOCK_OFFSET_VALID).
Or simply call it "offset" and if false, never return BDRV_BLOCK_OFFSET_VALID.
Fam
Re: [Qemu-devel] [PATCH v2 03/15] block: Add flag to avoid wasted work in bdrv_is_allocated()
Quoted 9 lines · Fam Zheng
Quoted 8 lines
Quoted 2 lines
Sorry for bikeshedding.
Not a problem, I also had some double-takes in writing my own code trying to remember which way I wanted the 'allocation' boolean to be set, so coming up with a more intuitive name/default state in order to help legibility is worth it. Do any of my above suggestions sound better?
Quoted 4 lines
I'd vote for "mapping" because it has a close connection with offset (as in
BDRV_BLOCK_OFFSET_VALID).Or simply call it "offset" and if false, never return
BDRV_BLOCK_OFFSET_VALID.
Well, there ARE drivers that WANT to return BDRV_BLOCK_OFFSET_VALID regardless of the state of the boolean (namely, any driver that also returns BDRV_BLOCK_RAW, to hint that this is a passthrough and the query should be repeated at the next BDS in the chain). So stating that 'offset' is false MUST preclude BDRV_BLOCK_OFFSET_VALID is a bit too strong, but I can probably come up with appropriate wording that meets in the middle ground (if 'offset' is true, then make all efforts to include BDRV_BLOCK_OFFSET_VALID in the return if that is possible; if it is false, then omitting the flag in order to get a larger pnum is acceptable)).
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3266 Virtualization: qemu.org | libvirt.org
Re: [Qemu-devel] [PATCH v2 03/15] block: Add flag to avoid wasted work in bdrv_is_allocated()
Quoted 15 lines · Eric Blake
Quoted 9 lines · Fam Zheng
Quoted 8 lines
Quoted 2 lines
Sorry for bikeshedding.
Not a problem, I also had some double-takes in writing my own code trying to remember which way I wanted the 'allocation' boolean to be set, so coming up with a more intuitive name/default state in order to help legibility is worth it. Do any of my above suggestions sound better?
Quoted 4 lines
I'd vote for "mapping" because it has a close connection with offset (as in
BDRV_BLOCK_OFFSET_VALID).Or simply call it "offset" and if false, never return
BDRV_BLOCK_OFFSET_VALID.
Quoted 10 lines
Well, there ARE drivers that WANT to return
BDRV_BLOCK_OFFSET_VALIDregardless of the state of the boolean (namely, any driver that also returnsBDRV_BLOCK_RAW, to hint that this is a passthrough and the query should be repeated at the next BDS in the chain). So stating that 'offset' is false MUST precludeBDRV_BLOCK_OFFSET_VALIDis a bit too strong, but I can probably come up with appropriate wording that meets in the middle ground (if 'offset' is true, then make all efforts to includeBDRV_BLOCK_OFFSET_VALIDin the return if that is possible; if it is false, then omitting the flag in order to get a larger pnum is acceptable)).
Yes you are totally right, I thought that too after replied.
Fam
Re: [Qemu-devel] [PATCH v2 03/15] block: Add flag to avoid wasted work in bdrv_is_allocated()
In reply to Eric BlakeQuoted 25 lines · Eric Blake
Not all callers care about which BDS owns the mapping for a given range of the file. In particular,
bdrv_is_allocated()cares more about finding the largest run of allocated data from the guest perspective, whether or not that data is consecutive from the host perspective. Therefore, doing subsequent refinements such as checking how much of the format-layer allocation also satisfiesBDRV_BLOCK_ZEROat the protocol layer is wasted work - in the best case, it just costs extra CPU cycles during a singlebdrv_is_allocated(), but in the worst case, it results in a smaller *pnum, and forces callers to iterate through more status probes when visiting the entire file for even more extra CPU cycles.This patch only optimizes the block layer. But subsequent patches will tweak the driver callback to be byte-based, and in the process, can also pass this hint through to the driver.
Signed-off-by Eric Blake <[email protected]>block/io.c +1
-1@@ -1810,12 +1817,13 @@ static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, } } - if (local_file && local_file != bs && + if (!allocation && local_file && local_file != bs &&
block/io.c static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, · line 1829
Quoted 10 lines
block/io.c +2
-1(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) && (ret & BDRV_BLOCK_OFFSET_VALID)) {int file_pnum; - ret2 =bdrv_co_get_block_status (local_file, ret >>BDRV_SECTOR_BITS , + ret2 =bdrv_co_get_block_status (local_file, true, + ret >>BDRV_SECTOR_BITS , *pnum, &file_pnum,NULL );if (ret2 >=0 ) {/* Ignore errors. This is just providing extra information, it
Hmm. My initial thinking here was that if we already have a good primary status, we want our secondary status (where we are probing bs->file for whether we can add BDRV_BLOCK_ZERO) to be as fast as possible, so I hard-coded the answer that favors is_allocated (I have to be careful describing this, since v3 will switch from 'bool allocated=true' to 'bool mapping=false' to express that same request). But it turns out that, at least for file-posix.c (for that matter, for several protocol drivers), it's a LOT faster to just blindly state that the entire file is allocated and data than it is to lseek(SEEK_HOLE). So favoring allocation status instead of mapping status defeats the purpose, and this should be s/true/allocation/ (which is always false at this point) [or conversely s/false/mapping/, which is always true, in v3].
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3266 Virtualization: qemu.org | libvirt.org
PATCH v2 4/15 block: Make bdrv_round_to_clusters() signature more useful
In reply to Eric BlakeIn the process of converting sector-based interfaces to bytes, I'm finding it easier to represent a byte count as a 64-bit integer at the block layer (even if we are internally capped by SIZE_MAX or even INT_MAX for individual transactions, it's still nicer to not have to worry about truncation/overflow issues on as many variables). Update the signature of bdrv_round_to_clusters() to uniformly use int64_t, matching the signature already chosen for bdrv_is_allocated and the fact that off_t is also a signed type, then adjust clients according to the required fallout.
---
v2: fix commit message [John], rebase to earlier changes, including mirror_clip_bytes() signature update
--- include/block/block.h | 4 ++-- block/io.c | 7 ++++--- block/mirror.c | 7 +++---- block/trace-events | 2 +- 4 files changed, 10 insertions(+), 10 deletions(-)
include/block/block.h +2 -2
@@ -473,9 +473,9 @@ int bdrv_get_flags(BlockDriverState *bs);int bdrv_get_info (BlockDriverState *bs,BlockDriverInfo *bdi);ImageInfoSpecific *bdrv_get_specific_info (BlockDriverState *bs);void bdrv_round_to_clusters (BlockDriverState *bs, -int64_t offset,unsigned int bytes, +int64_t offset,int64_t bytes,int64_t *cluster_offset, -unsigned int *cluster_bytes); +int64_t *cluster_bytes);const char *bdrv_get_encrypted_filename (BlockDriverState *bs); void bdrv_get_backing_filename(BlockDriverState *bs,
block/io.c +4 -3
@@ -422,9 +422,9 @@ static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)* Round a region to cluster boundaries */ void bdrv_round_to_clusters (BlockDriverState *bs, -int64_t offset,unsigned int bytes, +int64_t offset,int64_t bytes,int64_t *cluster_offset, -unsigned int *cluster_bytes) +int64_t *cluster_bytes) {BlockDriverInfo bdi;
@@ -922,7 +922,7 @@ static int coroutine_fn bdrv_co_do_copy_on_readv(BdrvChild *child,struct iovec iov;QEMUIOVector bounce_qiov;int64_t cluster_offset; -unsigned int cluster_bytes; +int64_t cluster_bytes;size_t skip_bytes;int ret;
@@ -943,6 +943,7 @@ static int coroutine_fn bdrv_co_do_copy_on_readv(BdrvChild *child,trace_bdrv_co_do_copy_on_readv (bs, offset, bytes, cluster_offset, cluster_bytes); +assert (cluster_bytes <SIZE_MAX ); iov.iov_len = cluster_bytes; iov.iov_base = bounce_buffer =qemu_try_blockalign (bs, iov.iov_len);if (bounce_buffer ==NULL ) {
block/mirror.c +3 -4
@@ -190,10 +190,9 @@ static int mirror_cow_align(MirrorBlockJob *s, int64_t *offset,bool need_cow;int ret =0 ;int64_t align_offset = *offset; -unsigned int align_bytes = *bytes; +int64_t align_bytes = *bytes;int max_bytes = s->granularity * s->max_iov; -assert (*bytes <INT_MAX ); need_cow = !test_bit (*offset / s->granularity, s->cow_bitmap); need_cow |= !test_bit ((*offset + *bytes -1 ) / s->granularity, s->cow_bitmap);
@@ -389,7 +388,7 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)while (nb_chunks >0 && offset < s->bdev_length) {int64_t ret;int io_sectors; -unsigned int io_bytes; +int64_t io_bytes;int64_t io_bytes_acct;enum MirrorMethod {MIRROR_METHOD_COPY ,
@@ -414,7 +413,7 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s) io_bytes = s->granularity; }else if (ret >=0 && !(ret &BDRV_BLOCK_DATA )) {int64_t target_offset; -unsigned int target_bytes; +int64_t target_bytes;bdrv_round_to_clusters (blk_bs (s->target), offset, io_bytes, &target_offset, &target_bytes); if (target_offset == offset &&
block/trace-events +1 -1
@@ -12,7 +12,7 @@ blk_co_pwritev(void *blk, void *bs, int64_t offset, unsigned int bytes, int flag bdrv_co_readv(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d" bdrv_co_writev(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d" bdrv_co_pwrite_zeroes(void *bs, int64_t offset, int count, int flags) "bs %p offset %"PRId64" count %d flags %#x" -bdrv_co_do_copy_on_readv(void *bs, int64_t offset, unsigned int bytes, int64_t cluster_offset, unsigned int cluster_bytes) "bs %p offset %"PRId64" bytes %u cluster_offset %"PRId64" cluster_bytes %u" +bdrv_co_do_copy_on_readv(void *bs, int64_t offset, int64_t bytes, int64_t cluster_offset, unsigned int cluster_bytes) "bs %p offset %"PRId64" bytes %"PRId64" cluster_offset %"PRId64" cluster_bytes %u" # block/stream.c stream_one_iteration(void *s, int64_t offset, uint64_t bytes, int is_allocated) "s %p offset %" PRId64 " bytes %" PRIu64 " is_allocated %d"
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 04/15] block: Make bdrv_round_to_clusters() signature more useful
Quoted 11 lines · Eric Blake
In the process of converting sector-based interfaces to bytes, I'm finding it easier to represent a byte count as a 64-bit integer at the block layer (even if we are internally capped by
SIZE_MAXor evenINT_MAXfor individual transactions, it's still nicer to not have to worry about truncation/overflow issues on as many variables). Update the signature ofbdrv_round_to_clusters()to uniformly useint64_t, matching the signature already chosen forbdrv_is_allocatedand the fact thatoff_tis also a signed type, then adjust clients according to the required fallout.
Quoted 2 lines
Signed-off-by Eric Blake <[email protected]>
PATCH v2 5/15 qcow2: Switch is_zero_sectors() to byte-based
In reply to Eric BlakeWe are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change), and rename it to is_zero() in the process.
---
v2: rename function, rebase to upstream changes
--- block/qcow2.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-)
block/qcow2.c +18 -14
@@ -2905,21 +2905,28 @@ finish: } -static bool is_zero_sectors (BlockDriverState *bs,int64_t start, -uint32_t count) +static bool is_zero (BlockDriverState *bs,int64_t offset,int64_t bytes) {int nr;int64_t res; +int64_t start; -if (start + count > bs->total_sectors) { - count = bs->total_sectors - start; +/* Widen to sector boundaries, then clamp to image length, before +* checking status of underlying sectors */ + start =QEMU_ALIGN_DOWN (offset,BDRV_SECTOR_SIZE ); + bytes =QEMU_ALIGN_UP (offset + bytes,BDRV_SECTOR_SIZE ) - start; + +if (start + bytes > bs->total_sectors *BDRV_SECTOR_SIZE ) { + bytes = bs->total_sectors *BDRV_SECTOR_SIZE - start; } -if (!count) { +if (!bytes) {return true; } - res =bdrv_get_block_status_above (bs,NULL , start, count, &nr,NULL ); -return res >=0 && (res &BDRV_BLOCK_ZERO ) && nr == count; + res =bdrv_get_block_status_above (bs,NULL , start >>BDRV_SECTOR_BITS , + bytes >>BDRV_SECTOR_BITS , &nr,NULL ); +return res >=0 && (res &BDRV_BLOCK_ZERO ) && + nr *BDRV_SECTOR_SIZE == bytes; } static coroutine_fn int qcow2_co_pwrite_zeroes(BlockDriverState *bs,
@@ -2937,24 +2944,21 @@ static coroutine_fn int qcow2_co_pwrite_zeroes(BlockDriverState *bs, }if (head || tail) { -int64_t cl_start = (offset - head) >>BDRV_SECTOR_BITS ;uint64_t off;unsigned int nr;assert (head + bytes <= s->cluster_size);/* check whether remainder of cluster already reads as zero */ -if (!(is_zero_sectors (bs, cl_start, -DIV_ROUND_UP (head,BDRV_SECTOR_SIZE )) && -is_zero_sectors (bs, (offset + bytes) >>BDRV_SECTOR_BITS , -DIV_ROUND_UP (-tail & (s->cluster_size -1 ), -BDRV_SECTOR_SIZE )))) { +if (!(is_zero (bs, offset - head, head) && +is_zero (bs, offset + bytes, + tail ? s->cluster_size - tail :0 ))) {return -ENOTSUP ; }qemu_co_mutex_lock (&s->lock);/* We can have new write after previous check */ - offset = cl_start <<BDRV_SECTOR_BITS ; + offset =QEMU_ALIGN_DOWN (offset, s->cluster_size); bytes = s->cluster_size; nr = s->cluster_size; ret =qcow2_get_cluster_offset (bs, offset, &nr, &off);
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 05/15] qcow2: Switch is_zero_sectors() to byte-based
Quoted 7 lines · Eric Blake
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change), and rename it to
is_zero()in the process.Signed-off-by Eric Blake <[email protected]>
PATCH v2 6/15 block: Switch bdrv_make_zero() to byte-based
In reply to Eric BlakeWe are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Change the internal loop iteration of zeroing a device to track by bytes instead of sectors (although we are still guaranteed that we iterate by steps that are sector-aligned).
---
v2: rebase to earlier changes
--- block/io.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
block/io.c +16 -16
@@ -669,38 +669,38 @@ int bdrv_pwrite_zeroes(BdrvChild *child, int64_t offset,*/ int bdrv_make_zero (BdrvChild *child,BdrvRequestFlags flags) { -int64_t target_sectors, ret, nb_sectors, sector_num =0 ; +int64_t target_size, ret, bytes, offset =0 ;BlockDriverState *bs = child->bs; -int n; +int n;/* sectors */ - target_sectors =bdrv_nb_sectors (bs); -if (target_sectors <0 ) { -return target_sectors; + target_size =bdrv_getlength (bs); +if (target_size <0 ) { +return target_size; }for (;;) { - nb_sectors =MIN (target_sectors - sector_num,BDRV_REQUEST_MAX_SECTORS ); -if (nb_sectors <=0 ) { + bytes =MIN (target_size - offset,BDRV_REQUEST_MAX_BYTES ); +if (bytes <=0 ) {return 0 ; } - ret =bdrv_get_block_status (bs, sector_num, nb_sectors, &n,NULL ); + ret =bdrv_get_block_status (bs, offset >>BDRV_SECTOR_BITS , + bytes >>BDRV_SECTOR_BITS , &n,NULL );if (ret <0 ) { -error_report ("error getting block status at sector %" PRId64": %s" , - sector_num,strerror (-ret)); +error_report ("error getting block status at offset %" PRId64": %s" , + offset,strerror (-ret));return ret; }if (ret &BDRV_BLOCK_ZERO ) { - sector_num += n; + offset += n *BDRV_SECTOR_BITS ;continue ; } - ret =bdrv_pwrite_zeroes (child, sector_num <<BDRV_SECTOR_BITS , - n <<BDRV_SECTOR_BITS , flags); + ret =bdrv_pwrite_zeroes (child, offset, n *BDRV_SECTOR_SIZE , flags);if (ret <0 ) { -error_report ("error writing zeroes at sector %" PRId64": %s" , - sector_num,strerror (-ret)); +error_report ("error writing zeroes at offset %" PRId64": %s" , + offset,strerror (-ret));return ret; } - sector_num += n; + offset += n *BDRV_SECTOR_SIZE ; } }
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 06/15] block: Switch bdrv_make_zero() to byte-based
Quoted 8 lines · Eric Blake
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Change the internal loop iteration of zeroing a device to track by bytes instead of sectors (although we are still guaranteed that we iterate by steps that are sector-aligned).
Signed-off-by Eric Blake <[email protected]>
PATCH v2 7/15 qemu-img: Switch get_block_status() to byte-based
In reply to Eric BlakeWe are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Continue by converting an internal function (no semantic change), and simplifying its caller accordingly.
---
v2: no change
--- qemu-img.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-)
qemu-img.c +11 -13
@@ -2674,14 +2674,16 @@ static void dump_map_entry(OutputFormat output_format, MapEntry *e, } } -static int get_block_status (BlockDriverState *bs,int64_t sector_num, -int nb_sectors,MapEntry *e) +static int get_block_status (BlockDriverState *bs,int64_t offset, +int64_t bytes,MapEntry *e) {int64_t ret;int depth;BlockDriverState *file;bool has_offset; +int nb_sectors = bytes >>BDRV_SECTOR_BITS ; +assert (bytes <INT_MAX );/* As an optimization, we could cache the current range of unallocated * clusters in each file of the chain, and avoid querying the same * range repeatedly.
@@ -2689,8 +2691,8 @@ static int get_block_status(BlockDriverState *bs, int64_t sector_num, depth =0 ;for (;;) { - ret =bdrv_get_block_status (bs, sector_num, nb_sectors, &nb_sectors, - &file); + ret =bdrv_get_block_status (bs, offset >>BDRV_SECTOR_BITS , nb_sectors, + &nb_sectors, &file);if (ret <0 ) {return ret; }
@@ -2710,7 +2712,7 @@ static int get_block_status(BlockDriverState *bs, int64_t sector_num, has_offset = !!(ret &BDRV_BLOCK_OFFSET_VALID ); *e = (MapEntry ) { - .start = sector_num *BDRV_SECTOR_SIZE , + .start = offset, .length = nb_sectors *BDRV_SECTOR_SIZE , .data = !!(ret &BDRV_BLOCK_DATA ), .zero = !!(ret &BDRV_BLOCK_ZERO ),
@@ -2840,16 +2842,12 @@ static int img_map(int argc, char **argv) length =blk_getlength (blk);while (curr.start + curr.length < length) { -int64_t nsectors_left; -int64_t sector_num; -int n; - - sector_num = (curr.start + curr.length) >>BDRV_SECTOR_BITS ; +int64_t offset = curr.start + curr.length; +int64_t n;/* Probe up to 1 GiB at a time. */ - nsectors_left =DIV_ROUND_UP (length,BDRV_SECTOR_SIZE ) - sector_num; - n =MIN (1 << (30 -BDRV_SECTOR_BITS ), nsectors_left); - ret =get_block_status (bs, sector_num, n, &next); + n =QEMU_ALIGN_DOWN (MIN (1 <<30 , length - offset),BDRV_SECTOR_SIZE ); + ret =get_block_status (bs, offset, n, &next);if (ret <0 ) {error_report ("Could not read file metadata: %s" ,strerror (-ret));
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 07/15] qemu-img: Switch get_block_status() to byte-based
Quoted 6 lines · Eric Blake
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Continue by converting an internal function (no semantic change), and simplifying its caller accordingly.
Signed-off-by Eric Blake <[email protected]>
PATCH v2 8/15 block: Convert bdrv_get_block_status() to bytes
In reply to Eric BlakeWe are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status() to bdrv_block_status() ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned, but that can be relaxed when a later patch implements byte-based block status in the drivers.
Note that we have an inherent limitation in the BDRV_BLOCK_* return
values: BDRV_BLOCK_OFFSET_VALID can only return the start of a sector, even if we later relax the interface to query for the status starting at an intermediate byte; document the obvious interpretation that valid offsets are always sector-relative.
Therefore, for the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_block_status(). But some code, particularly bdrv_is_allocated(), gets a lot simpler because it no longer has to mess with sectors.
For ease of review, bdrv_get_block_status_above() will be tackled separately.
---
v2: rebase to earlier changes
--- include/block/block.h | 12 +++++++----- block/io.c | 31 +++++++++++++++++++------------ block/qcow2-cluster.c | 2 +- qemu-img.c | 20 +++++++++++--------- 4 files changed, 38 insertions(+), 27 deletions(-)
include/block/block.h +7 -5
@@ -138,8 +138,10 @@ typedef struct HDGeometry {* * If BDRV_BLOCK_OFFSET_VALID is set, bits 9-62 (BDRV_BLOCK_OFFSET_MASK) * represent the offset in the returned BDS that is allocated for the -* corresponding raw data; however, whether that offset actually contains -* data also depends on BDRV_BLOCK_DATA and BDRV_BLOCK_ZERO, as follows: +* corresponding raw data. Individual bytes are at the same sector-relative +* locations (and thus, this bit cannot be set for mappings which are +* not equivalent modulo 512). However, whether that offset actually +* contains data also depends on BDRV_BLOCK_DATA, as follows: * * DATA ZERO OFFSET_VALID * t t t sectors read as zero, returned file is zero at offset
@@ -419,9 +421,9 @@ int bdrv_has_zero_init_1(BlockDriverState *bs);int bdrv_has_zero_init (BlockDriverState *bs);bool bdrv_unallocated_blocks_are_zero (BlockDriverState *bs);bool bdrv_can_write_zeroes_with_unmap (BlockDriverState *bs); -int64_t bdrv_get_block_status (BlockDriverState *bs,int64_t sector_num, -int nb_sectors,int *pnum, -BlockDriverState **file); +int64_t bdrv_block_status (BlockDriverState *bs,int64_t offset, +int64_t bytes,int64_t *pnum, +BlockDriverState **file); int64_t bdrv_get_block_status_above(BlockDriverState *bs, BlockDriverState *base, int64_t sector_num,
block/io.c +19 -12
@@ -671,7 +671,6 @@ int bdrv_make_zero(BdrvChild *child, BdrvRequestFlags flags) {int64_t target_size, ret, bytes, offset =0 ;BlockDriverState *bs = child->bs; -int n;/* sectors */ target_size =bdrv_getlength (bs);if (target_size <0 ) {
@@ -683,24 +682,23 @@ int bdrv_make_zero(BdrvChild *child, BdrvRequestFlags flags)if (bytes <=0 ) {return 0 ; } - ret =bdrv_get_block_status (bs, offset >>BDRV_SECTOR_BITS , - bytes >>BDRV_SECTOR_BITS , &n,NULL ); + ret =bdrv_block_status (bs, offset, bytes, &bytes,NULL );if (ret <0 ) {error_report ("error getting block status at offset %" PRId64": %s" , offset,strerror (-ret));return ret; }if (ret &BDRV_BLOCK_ZERO ) { - offset += n *BDRV_SECTOR_BITS ; + offset += bytes;continue ; } - ret =bdrv_pwrite_zeroes (child, offset, n *BDRV_SECTOR_SIZE , flags); + ret =bdrv_pwrite_zeroes (child, offset, bytes, flags);if (ret <0 ) {error_report ("error writing zeroes at offset %" PRId64": %s" , offset,strerror (-ret));return ret; } - offset += n *BDRV_SECTOR_SIZE ; + offset += bytes; } }
@@ -1956,13 +1954,22 @@ int64_t bdrv_get_block_status_above(BlockDriverState *bs, nb_sectors, pnum, file); } -int64_t bdrv_get_block_status (BlockDriverState *bs, -int64_t sector_num, -int nb_sectors,int *pnum, -BlockDriverState **file) +int64_t bdrv_block_status (BlockDriverState *bs, +int64_t offset,int64_t bytes,int64_t *pnum, +BlockDriverState **file) { -return bdrv_get_block_status_above (bs,backing_bs (bs), - sector_num, nb_sectors, pnum, file); +int64_t ret; +int n; + +assert (QEMU_IS_ALIGNED (offset | bytes,BDRV_SECTOR_SIZE )); +assert (bytes <=BDRV_REQUEST_MAX_BYTES ); + ret =bdrv_get_block_status_above (bs,backing_bs (bs), + offset >>BDRV_SECTOR_BITS , + bytes >>BDRV_SECTOR_BITS , &n, file); +if (pnum) { + *pnum = n *BDRV_SECTOR_SIZE ; + } +return ret; } int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t offset,
block/qcow2-cluster.c +1 -1
@@ -1567,7 +1567,7 @@ static int discard_single_l2(BlockDriverState *bs, uint64_t offset,* cluster is already marked as zero, or if it's unallocated and we * don't have a backing file. * -* TODO We might want to use bdrv_get_block_status(bs) here, but we're +* TODO We might want to use bdrv_block_status(bs) here, but we're * holding s->lock, so that doesn't work today. * * If full_discard is true, the sector should not read back as zeroes,
qemu-img.c +11 -9
@@ -1594,9 +1594,14 @@ static int convert_iteration_sectors(ImgConvertState *s, int64_t sector_num)if (s->sector_next_status <= sector_num) {if (s->target_has_backing) { - ret =bdrv_get_block_status (blk_bs (s->src[src_cur]), - sector_num - src_cur_offset, - n, &n,NULL ); +int64_t count = n *BDRV_SECTOR_SIZE ; + + ret =bdrv_block_status (blk_bs (s->src[src_cur]), + (sector_num - src_cur_offset) * +BDRV_SECTOR_SIZE , + count, &count,NULL ); +assert (ret <0 ||QEMU_IS_ALIGNED (count,BDRV_SECTOR_SIZE )); + n = count >>BDRV_SECTOR_BITS ; }else { ret = bdrv_get_block_status_above(blk_bs(s->src[src_cur]), NULL, sector_num - src_cur_offset,
@@ -2681,9 +2686,7 @@ static int get_block_status(BlockDriverState *bs, int64_t offset,int depth;BlockDriverState *file;bool has_offset; -int nb_sectors = bytes >>BDRV_SECTOR_BITS ; -assert (bytes <INT_MAX );/* As an optimization, we could cache the current range of unallocated * clusters in each file of the chain, and avoid querying the same * range repeatedly.
@@ -2691,12 +2694,11 @@ static int get_block_status(BlockDriverState *bs, int64_t offset, depth =0 ;for (;;) { - ret =bdrv_get_block_status (bs, offset >>BDRV_SECTOR_BITS , nb_sectors, - &nb_sectors, &file); + ret =bdrv_block_status (bs, offset, bytes, &bytes, &file);if (ret <0 ) {return ret; } -assert (nb_sectors); +assert (bytes);if (ret & (BDRV_BLOCK_ZERO |BDRV_BLOCK_DATA )) {break ; }
@@ -2713,7 +2715,7 @@ static int get_block_status(BlockDriverState *bs, int64_t offset, *e = (MapEntry ) { .start = offset, - .length = nb_sectors *BDRV_SECTOR_SIZE , + .length = bytes, .data = !!(ret &BDRV_BLOCK_DATA ), .zero = !!(ret &BDRV_BLOCK_ZERO ), .offset = ret &BDRV_BLOCK_OFFSET_MASK ,
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 08/15] block: Convert bdrv_get_block_status() to bytes
Quoted 23 lines · Eric Blake
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access.
Changing the name of the function from
bdrv_get_block_status()tobdrv_block_status()ensures that the compiler enforces that all callers are updated. For now, theio.clayer still assert()s that all callers are sector-aligned, but that can be relaxed when a later patch implements byte-based block status in the drivers.Note that we have an inherent limitation in the BDRV_BLOCK_* return
values:BDRV_BLOCK_OFFSET_VALIDcan only return the start of a sector, even if we later relax the interface to query for the status starting at an intermediate byte; document the obvious interpretation that valid offsets are always sector-relative.Therefore, for the most part this patch is just the addition of scaling at the callers followed by inverse scaling at
bdrv_block_status(). But some code, particularlybdrv_is_allocated(), gets a lot simpler because it no longer has to mess with sectors.
Quoted 5 lines
For ease of review,
bdrv_get_block_status_above()will be tackled separately.Signed-off-by Eric Blake <[email protected]>
PATCH v2 9/15 block: Switch bdrv_co_get_block_status() to byte-based
In reply to Eric BlakeWe are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change), and as with its public counterpart, rename to bdrv_co_block_status() to make the compiler enforce that we catch all uses. For now, we assert that callers still pass aligned data, but ultimately, this will be the function where we hand off to a byte-based driver callback, and will eventually need to add logic to ensure we round calls according to the driver's request_alignment then touch up the result handed back to the caller, to start permitting a caller to pass unaligned offsets.
---
v2: rebase to earlier changes
--- block/io.c | 90 ++++++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 53 insertions(+), 37 deletions(-)
block/io.c +53 -37
@@ -1721,42 +1721,43 @@ int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,* status; this is a hint that a larger 'pnum' result is more * important than including BDRV_BLOCK_OFFSET_VALID in the return. * -* If 'sector_num' is beyond the end of the disk image the return value is +* If 'offset' is beyond the end of the disk image the return value is * BDRV_BLOCK_EOF and 'pnum' is set to 0. * -* 'pnum' is set to the number of sectors (including and immediately following -* the specified sector) that are known to be in the same -* allocated/unallocated state. +* 'pnum' is set to the number of bytes (including and immediately following +* the specified offset) that are known to be in the same +* allocated/unallocated state. It may be NULL. * -* 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes +* 'bytes' is the max value 'pnum' should be set to. If bytes goes * beyond the end of the disk image it will be clamped; if 'pnum' is set to * the end of the image, then the returned value will include BDRV_BLOCK_EOF. * * If returned value is positive, BDRV_BLOCK_OFFSET_VALID bit is set, and -* 'file' is non-NULL, then '*file' points to the BDS which the sector range -* is allocated in. +* 'file' is non-NULL, then '*file' points to the BDS which owns the +* allocated sector that contains offset. */ -static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, -bool allocation, -int64_t sector_num, -int nb_sectors,int *pnum, -BlockDriverState **file) +static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs, +bool allocation, +int64_t offset,int64_t bytes, +int64_t *pnum, +BlockDriverState **file) { -int64_t total_sectors; -int64_t n; +int64_t total_size; +int64_t n;/* bytes */ int64_t ret, ret2;BlockDriverState *local_file =NULL ; +int count;/* sectors */ assert (pnum); - total_sectors =bdrv_nb_sectors (bs); -if (total_sectors <0 ) { + total_size =bdrv_getlength (bs); +if (total_size <0 ) {if (file) { *file =NULL ; } -return total_sectors; +return total_size; } -if (sector_num >= total_sectors) { +if (offset >= total_size) { *pnum =0 ;if (file) { *file =NULL ;
@@ -1764,19 +1765,19 @@ static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,return BDRV_BLOCK_EOF ; } - n = total_sectors - sector_num; -if (n < nb_sectors) { - nb_sectors = n; + n = total_size - offset; +if (n < bytes) { + bytes = n; }if (!bs->drv->bdrv_co_get_block_status) { - *pnum = nb_sectors; + *pnum = bytes; ret =BDRV_BLOCK_DATA |BDRV_BLOCK_ALLOCATED ; -if (sector_num + nb_sectors == total_sectors) { +if (offset + bytes == total_size) { ret |=BDRV_BLOCK_EOF ; }if (bs->drv->protocol_name) { - ret |=BDRV_BLOCK_OFFSET_VALID | (sector_num *BDRV_SECTOR_SIZE ); + ret |=BDRV_BLOCK_OFFSET_VALID | (offset &BDRV_BLOCK_OFFSET_MASK );if (file) { *file = bs; }
@@ -1787,18 +1788,27 @@ static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, }bdrv_inc_in_flight (bs); - ret = bs->drv->bdrv_co_get_block_status (bs, sector_num, nb_sectors, pnum, +/* +* TODO: Rather than require aligned offsets, we could instead +* round to the driver's request_alignment here, then touch up +* count afterwards back to the caller's expectations. +*/ +assert (QEMU_IS_ALIGNED (offset | bytes,BDRV_SECTOR_SIZE )); + ret = bs->drv->bdrv_co_get_block_status (bs, offset >>BDRV_SECTOR_BITS , + bytes >>BDRV_SECTOR_BITS , &count, &local_file);if (ret <0 ) { *pnum =0 ; goto out; } + *pnum = count *BDRV_SECTOR_SIZE ;if (ret &BDRV_BLOCK_RAW ) {assert (ret &BDRV_BLOCK_OFFSET_VALID && local_file); - ret =bdrv_co_get_block_status (local_file, allocation, - ret >>BDRV_SECTOR_BITS , - *pnum, pnum, &local_file); + ret =bdrv_co_block_status (local_file, allocation, + ret &BDRV_BLOCK_OFFSET_MASK , + *pnum, pnum, &local_file); +assert (QEMU_IS_ALIGNED (*pnum,BDRV_SECTOR_SIZE )); goto out; }
@@ -1809,8 +1819,8 @@ static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, ret |=BDRV_BLOCK_ZERO ; }else if (bs->backing) {BlockDriverState *bs2 = bs->backing->bs; -int64_t nb_sectors2 =bdrv_nb_sectors (bs2); -if (nb_sectors2 >=0 && sector_num >= nb_sectors2) { +int64_t size2 =bdrv_getlength (bs2); +if (size2 >=0 && offset >= size2) { ret |=BDRV_BLOCK_ZERO ; } }
@@ -1819,11 +1829,11 @@ static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,if (!allocation && local_file && local_file != bs && (ret &BDRV_BLOCK_DATA ) && !(ret &BDRV_BLOCK_ZERO ) && (ret &BDRV_BLOCK_OFFSET_VALID )) { -int file_pnum; +int64_t file_pnum; - ret2 =bdrv_co_get_block_status (local_file, true, - ret >>BDRV_SECTOR_BITS , - *pnum, &file_pnum,NULL ); + ret2 =bdrv_co_block_status (local_file, true, + ret &BDRV_BLOCK_OFFSET_MASK , + *pnum, &file_pnum,NULL );if (ret2 >=0 ) {/* Ignore errors. This is just providing extra information, it * is useful but not necessary.
@@ -1849,7 +1859,7 @@ out: *file = local_file; }bdrv_dec_in_flight (bs); -if (ret >=0 && sector_num + *pnum == total_sectors) { +if (ret >=0 && offset + *pnum == total_size) { ret |=BDRV_BLOCK_EOF ; }return ret;
@@ -1869,11 +1879,17 @@ static int64_t coroutine_fn bdrv_co_get_block_status_above(BlockDriverState *bs,assert (bs != base);for (p = bs; p != base; p =backing_bs (p)) { - ret =bdrv_co_get_block_status (p, allocation, sector_num, nb_sectors, - pnum, file); +int64_t count; + + ret =bdrv_co_block_status (p, allocation, + sector_num *BDRV_SECTOR_SIZE , + nb_sectors *BDRV_SECTOR_SIZE , &count, + file);if (ret <0 ) {break ; } +assert (QEMU_IS_ALIGNED (count,BDRV_SECTOR_SIZE )); + *pnum = count >>BDRV_SECTOR_BITS ;if (ret &BDRV_BLOCK_ZERO && ret &BDRV_BLOCK_EOF && !first) {/* * Reading beyond the end of the file continues to read
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 09/15] block: Switch bdrv_co_get_block_status() to byte-based
Quoted 11 lines · Eric Blake
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change), and as with its public counterpart, rename to
bdrv_co_block_status()to make the compiler enforce that we catch all uses. For now, we assert that callers still pass aligned data, but ultimately, this will be the function where we hand off to a byte-based driver callback, and will eventually need to add logic to ensure we round calls according to the driver'srequest_alignmentthen touch up the result handed back to the caller, to start permitting a caller to pass unaligned offsets.
Quoted 1 line
Signed-off-by Eric Blake <[email protected]>
PATCH v2 10/15 block: Switch BdrvCoGetBlockStatusData to byte-based
In reply to Eric BlakeWe are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal type (no semantic change), and rename it to match the corresponding public function rename.
---
v2: rebase to earlier changes
--- block/io.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-)
block/io.c +18 -13
@@ -1676,17 +1676,17 @@ int bdrv_flush_all(void) } -typedef struct BdrvCoGetBlockStatusData { +typedef struct BdrvCoBlockStatusData {BlockDriverState *bs;BlockDriverState *base;BlockDriverState **file; -int64_t sector_num; -int nb_sectors; -int *pnum; +int64_t offset; +int64_t bytes; +int64_t *pnum;int64_t ret;bool allocation;bool done; -}BdrvCoGetBlockStatusData ; +}BdrvCoBlockStatusData ; int64_t coroutine_fn bdrv_co_get_block_status_from_file(BlockDriverState *bs, int64_t sector_num,
@@ -1913,14 +1913,16 @@ static int64_t coroutine_fn bdrv_co_get_block_status_above(BlockDriverState *bs,/* Coroutine wrapper for bdrv_get_block_status_above() */ static void coroutine_fn bdrv_get_block_status_above_co_entry(void *opaque) { -BdrvCoGetBlockStatusData *data = opaque; +BdrvCoBlockStatusData *data = opaque; +int n; data->ret =bdrv_co_get_block_status_above (data->bs, data->base, data->allocation, - data->sector_num, - data->nb_sectors, - data->pnum, + data->offset >>BDRV_SECTOR_BITS , + data->bytes >>BDRV_SECTOR_BITS , + &n, data->file); + *data->pnum = n *BDRV_SECTOR_SIZE ; data->done = true; }
@@ -1937,13 +1939,14 @@ static int64_t bdrv_common_block_status_above(BlockDriverState *bs, BlockDriverState **file) {Coroutine *co; -BdrvCoGetBlockStatusData data = { +int64_t n; +BdrvCoBlockStatusData data = { .bs = bs, .base = base, .file = file, - .sector_num = sector_num, - .nb_sectors = nb_sectors, - .pnum = pnum, + .offset = sector_num *BDRV_SECTOR_SIZE , + .bytes = nb_sectors *BDRV_SECTOR_SIZE , + .pnum = &n, .allocation = allocation, .done = false, };
@@ -1957,6 +1960,8 @@ static int64_t bdrv_common_block_status_above(BlockDriverState *bs,bdrv_coroutine_enter (bs, co);BDRV_POLL_WHILE (bs, !data.done); } +assert (data.ret <0 ||QEMU_IS_ALIGNED (n,BDRV_SECTOR_SIZE )); + *pnum = n >>BDRV_SECTOR_BITS ;return data.ret; }
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 10/15] block: Switch BdrvCoGetBlockStatusData to byte-based
Quoted 7 lines · Eric Blake
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal type (no semantic change), and rename it to match the corresponding public function rename.
Signed-off-by Eric Blake <[email protected]>
PATCH v2 11/15 block: Switch bdrv_common_block_status_above() to byte-based
In reply to Eric BlakeWe are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change).
---
v2: new patch
--- block/io.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-)
block/io.c +21 -21
@@ -1934,19 +1934,18 @@ static void coroutine_fn bdrv_get_block_status_above_co_entry(void *opaque)static int64_t bdrv_common_block_status_above (BlockDriverState *bs,BlockDriverState *base,bool allocation, -int64_t sector_num, -int nb_sectors,int *pnum, +int64_t offset, +int64_t bytes,int64_t *pnum,BlockDriverState **file) {Coroutine *co; -int64_t n;BdrvCoBlockStatusData data = { .bs = bs, .base = base, .file = file, - .offset = sector_num *BDRV_SECTOR_SIZE , - .bytes = nb_sectors *BDRV_SECTOR_SIZE , - .pnum = &n, + .offset = offset, + .bytes = bytes, + .pnum = pnum, .allocation = allocation, .done = false, };
@@ -1960,8 +1959,6 @@ static int64_t bdrv_common_block_status_above(BlockDriverState *bs,bdrv_coroutine_enter (bs, co);BDRV_POLL_WHILE (bs, !data.done); } -assert (data.ret <0 ||QEMU_IS_ALIGNED (n,BDRV_SECTOR_SIZE )); - *pnum = n >>BDRV_SECTOR_BITS ;return data.ret; }
@@ -1971,8 +1968,19 @@ int64_t bdrv_get_block_status_above(BlockDriverState *bs, int nb_sectors, int *pnum, BlockDriverState **file) { - return bdrv_common_block_status_above(bs, base, false, sector_num, -nb_sectors ,pnum ,file ); + int64_t ret; +int64_t n; + + ret =bdrv_common_block_status_above (bs, base, false, + sector_num *BDRV_SECTOR_SIZE , + nb_sectors *BDRV_SECTOR_SIZE , + &n, file); +if (ret <0 ) { +return ret; + } +assert (QEMU_IS_ALIGNED (n,BDRV_SECTOR_SIZE )); + *pnum = n >>BDRV_SECTOR_BITS ; +return ret; } int64_t bdrv_block_status(BlockDriverState *bs,
@@ -1997,21 +2005,13 @@ int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t offset, int64_t bytes, int64_t *pnum) { int64_t ret; -int psectors; +int64_t dummy; -assert (QEMU_IS_ALIGNED (offset,BDRV_SECTOR_SIZE )); -assert (QEMU_IS_ALIGNED (bytes,BDRV_SECTOR_SIZE ) && - bytes <INT_MAX *BDRV_SECTOR_SIZE ); - ret =bdrv_common_block_status_above (bs,backing_bs (bs), true, - offset >>BDRV_SECTOR_BITS , - bytes >>BDRV_SECTOR_BITS , &psectors, -NULL ); + ret =bdrv_common_block_status_above (bs,backing_bs (bs), true, offset, + bytes, pnum ? pnum : &dummy,NULL );if (ret <0 ) {return ret; } -if (pnum) { - *pnum = psectors *BDRV_SECTOR_SIZE ; - }return !!(ret &BDRV_BLOCK_ALLOCATED ); }
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 11/15] block: Switch bdrv_common_block_status_above() to byte-based
Quoted 6 lines · Eric Blake
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change).
Signed-off-by Eric Blake <[email protected]>
PATCH v2 12/15 block: Switch bdrv_co_get_block_status_above() to byte-based
In reply to Eric BlakeWe are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal type (no semantic change), and rename it to match the corresponding public function rename.
---
v2: rebase to earlier changes
--- block/io.c | 48 ++++++++++++++++++------------------------------ 1 file changed, 18 insertions(+), 30 deletions(-)
block/io.c +18 -30
@@ -1865,12 +1865,12 @@ out:return ret; } -static int64_t coroutine_fn bdrv_co_get_block_status_above(BlockDriverState *bs, +static int64_t coroutine_fn bdrv_co_block_status_above(BlockDriverState *bs,BlockDriverState *base,bool allocation, -int64_t sector_num, -int nb_sectors, -int *pnum, +int64_t offset, +int64_t bytes, +int64_t *pnum,BlockDriverState **file) {BlockDriverState *p;
@@ -1879,17 +1879,10 @@ static int64_t coroutine_fn bdrv_co_get_block_status_above(BlockDriverState *bs,assert (bs != base);for (p = bs; p != base; p =backing_bs (p)) { -int64_t count; - - ret =bdrv_co_block_status (p, allocation, - sector_num *BDRV_SECTOR_SIZE , - nb_sectors *BDRV_SECTOR_SIZE , &count, - file); + ret =bdrv_co_block_status (p, allocation, offset, bytes, pnum, file);if (ret <0 ) {break ; } -assert (QEMU_IS_ALIGNED (count,BDRV_SECTOR_SIZE )); - *pnum = count >>BDRV_SECTOR_BITS ;if (ret &BDRV_BLOCK_ZERO && ret &BDRV_BLOCK_EOF && !first) {/* * Reading beyond the end of the file continues to read
@@ -1897,39 +1890,35 @@ static int64_t coroutine_fn bdrv_co_get_block_status_above(BlockDriverState *bs,* unallocated length we learned from an earlier * iteration. */ - *pnum = nb_sectors; + *pnum = bytes; }if (ret & (BDRV_BLOCK_ZERO |BDRV_BLOCK_DATA )) {break ; } -/* [sector_num, pnum] unallocated on this layer, which could be only -* the first part of [sector_num, nb_sectors]. */ - nb_sectors =MIN (nb_sectors, *pnum); +/* [offset, pnum] unallocated on this layer, which could be only +* the first part of [offset, bytes]. */ + bytes =MIN (bytes, *pnum); first = false; }return ret; }/* Coroutine wrapper for bdrv_get_block_status_above() */ -static void coroutine_fn bdrv_get_block_status_above_co_entry(void *opaque) +static void coroutine_fn bdrv_block_status_above_co_entry(void *opaque) {BdrvCoBlockStatusData *data = opaque; -int n; - data->ret =bdrv_co_get_block_status_above (data->bs, data->base, - data->allocation, - data->offset >>BDRV_SECTOR_BITS , - data->bytes >>BDRV_SECTOR_BITS , - &n, - data->file); - *data->pnum = n *BDRV_SECTOR_SIZE ; + data->ret =bdrv_co_block_status_above (data->bs, data->base, + data->allocation, + data->offset, data->bytes, + data->pnum, data->file); data->done = true; }/* -* Synchronous wrapper around bdrv_co_get_block_status_above(). +* Synchronous wrapper around bdrv_co_block_status_above(). * -* See bdrv_co_get_block_status_above() for details. +* See bdrv_co_block_status_above() for details. */ static int64_t bdrv_common_block_status_above(BlockDriverState *bs, BlockDriverState *base,
@@ -1952,10 +1941,9 @@ static int64_t bdrv_common_block_status_above(BlockDriverState *bs,if (qemu_in_coroutine ()) {/* Fast-path if already in coroutine context */ -bdrv_get_block_status_above_co_entry (&data); +bdrv_block_status_above_co_entry (&data); }else { - co =qemu_coroutine_create (bdrv_get_block_status_above_co_entry, - &data); + co =qemu_coroutine_create (bdrv_block_status_above_co_entry, &data);bdrv_coroutine_enter (bs, co);BDRV_POLL_WHILE (bs, !data.done); }
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 12/15] block: Switch bdrv_co_get_block_status_above() to byte-based
Quoted 6 lines · Eric Blake
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal type (no semantic change), and rename it to match the corresponding public function rename.
Signed-off-by Eric Blake <[email protected]>
PATCH v2 13/15 block: Convert bdrv_get_block_status_above() to bytes
In reply to Eric BlakeWe are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status_above() to bdrv_block_status_above() ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned, but that can be relaxed when a later patch implements byte-based block status in the drivers.
For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_block_status(). But some code, particularly bdrv_block_status(), gets a lot simpler because it no longer has to mess with sectors.
For ease of review, bdrv_get_block_status() was tackled separately.
---
v2: rebase to earlier changes
--- include/block/block.h | 10 +++++----- block/io.c | 39 ++++++++------------------------------- block/mirror.c | 12 ++++-------- block/qcow2.c | 8 +++----- qemu-img.c | 39 +++++++++++++++++++++++---------------- 5 files changed, 43 insertions(+), 65 deletions(-)
include/block/block.h +5 -5
@@ -424,11 +424,11 @@ bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs);int64_t bdrv_block_status (BlockDriverState *bs,int64_t offset,int64_t bytes,int64_t *pnum,BlockDriverState **file); -int64_t bdrv_get_block_status_above (BlockDriverState *bs, -BlockDriverState *base, -int64_t sector_num, -int nb_sectors,int *pnum, -BlockDriverState **file); +int64_t bdrv_block_status_above (BlockDriverState *bs, +BlockDriverState *base, +int64_t offset, +int64_t bytes,int64_t *pnum, +BlockDriverState **file);int bdrv_is_allocated (BlockDriverState *bs,int64_t offset,int64_t bytes,int64_t *pnum); int bdrv_is_allocated_above(BlockDriverState *top, BlockDriverState *base,
block/io.c +8 -31
@@ -1903,7 +1903,7 @@ static int64_t coroutine_fn bdrv_co_block_status_above(BlockDriverState *bs,return ret; } -/* Coroutine wrapper for bdrv_get_block_status_above() */ +/* Coroutine wrapper for bdrv_block_status_above() */ static void coroutine_fn bdrv_block_status_above_co_entry(void *opaque) {BdrvCoBlockStatusData *data = opaque;
@@ -1950,43 +1950,20 @@ static int64_t bdrv_common_block_status_above(BlockDriverState *bs,return data.ret; } -int64_t bdrv_get_block_status_above (BlockDriverState *bs, -BlockDriverState *base, -int64_t sector_num, -int nb_sectors,int *pnum, -BlockDriverState **file) +int64_t bdrv_block_status_above (BlockDriverState *bs,BlockDriverState *base, +int64_t offset,int64_t bytes,int64_t *pnum, +BlockDriverState **file) { -int64_t ret; -int64_t n; - - ret =bdrv_common_block_status_above (bs, base, false, - sector_num *BDRV_SECTOR_SIZE , - nb_sectors *BDRV_SECTOR_SIZE , - &n, file); -if (ret <0 ) { -return ret; - } -assert (QEMU_IS_ALIGNED (n,BDRV_SECTOR_SIZE )); - *pnum = n >>BDRV_SECTOR_BITS ; -return ret; +return bdrv_common_block_status_above (bs, base, false, offset, bytes, + pnum, file); }int64_t bdrv_block_status (BlockDriverState *bs,int64_t offset,int64_t bytes,int64_t *pnum,BlockDriverState **file) { -int64_t ret; -int n; - -assert (QEMU_IS_ALIGNED (offset | bytes,BDRV_SECTOR_SIZE )); -assert (bytes <=BDRV_REQUEST_MAX_BYTES ); - ret =bdrv_get_block_status_above (bs,backing_bs (bs), - offset >>BDRV_SECTOR_BITS , - bytes >>BDRV_SECTOR_BITS , &n, file); -if (pnum) { - *pnum = n *BDRV_SECTOR_SIZE ; - } -return ret; +return bdrv_block_status_above (bs,backing_bs (bs), + offset, bytes, pnum, file); } int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t offset,
block/mirror.c +4 -8
@@ -328,7 +328,6 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)uint64_t delay_ns =0 ;/* At least the first dirty chunk is mirrored in one iteration. */ int nb_chunks =1 ; -int sectors_per_chunk = s->granularity >>BDRV_SECTOR_BITS ;bool write_zeroes_ok =bdrv_can_write_zeroes_with_unmap (blk_bs (s->target));int max_io_bytes =MAX (s->buf_size /MAX_IN_FLIGHT ,MAX_IO_BYTES );
@@ -377,7 +376,7 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s) }/* Clear dirty bits before querying the block status, because -* calling bdrv_get_block_status_above could yield - if some blocks are +* calling bdrv_block_status_above could yield - if some blocks are * marked dirty in this window, we need to know. */ bdrv_reset_dirty_bitmap_locked(s->dirty_bitmap, offset,
@@ -387,7 +386,6 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)bitmap_set (s->in_flight_bitmap, offset / s->granularity, nb_chunks);while (nb_chunks >0 && offset < s->bdev_length) {int64_t ret; -int io_sectors;int64_t io_bytes;int64_t io_bytes_acct; enum MirrorMethod {
@@ -397,11 +395,9 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s) } mirror_method =MIRROR_METHOD_COPY ;assert (!(offset % s->granularity)); - ret =bdrv_get_block_status_above (source,NULL , - offset >>BDRV_SECTOR_BITS , - nb_chunks * sectors_per_chunk, - &io_sectors,NULL ); - io_bytes = io_sectors *BDRV_SECTOR_SIZE ; + ret =bdrv_block_status_above (source,NULL , offset, + nb_chunks * s->granularity, + &io_bytes,NULL );if (ret <0 ) { io_bytes =MIN (nb_chunks * s->granularity, max_io_bytes); }else if (ret &BDRV_BLOCK_DATA ) {
block/qcow2.c +3 -5
@@ -2907,7 +2907,7 @@ finish:static bool is_zero (BlockDriverState *bs,int64_t offset,int64_t bytes) { -int nr; +int64_t nr;int64_t res;int64_t start;
@@ -2923,10 +2923,8 @@ static bool is_zero(BlockDriverState *bs, int64_t offset, int64_t bytes)if (!bytes) {return true; } - res =bdrv_get_block_status_above (bs,NULL , start >>BDRV_SECTOR_BITS , - bytes >>BDRV_SECTOR_BITS , &nr,NULL ); -return res >=0 && (res &BDRV_BLOCK_ZERO ) && - nr *BDRV_SECTOR_SIZE == bytes; + res =bdrv_block_status_above (bs,NULL , start, bytes, &nr,NULL ); +return res >=0 && (res &BDRV_BLOCK_ZERO ) && nr == bytes; } static coroutine_fn int qcow2_co_pwrite_zeroes(BlockDriverState *bs,
qemu-img.c +23 -16
@@ -1224,7 +1224,7 @@ static int img_compare(int argc, char **argv)BlockDriverState *bs1, *bs2;int64_t total_sectors1, total_sectors2;uint8_t *buf1 =NULL , *buf2 =NULL ; -int pnum1, pnum2; +int64_t pnum1, pnum2;int allocated1, allocated2;int ret =0 ;/* return value - 0 Ident, 1 Different, >1 Error */ bool progress = false, quiet = false, strict = false;
@@ -1378,9 +1378,11 @@ static int img_compare(int argc, char **argv)if (nb_sectors <=0 ) {break ; } - status1 =bdrv_get_block_status_above (bs1,NULL , sector_num, - total_sectors1 - sector_num, - &pnum1,NULL ); + status1 =bdrv_block_status_above (bs1,NULL , + sector_num *BDRV_SECTOR_SIZE , + (total_sectors1 - sector_num) * +BDRV_SECTOR_SIZE , + &pnum1,NULL );if (status1 <0 ) { ret =3 ;error_report ("Sector allocation test failed for %s" , filename1);
@@ -1388,9 +1390,11 @@ static int img_compare(int argc, char **argv) } allocated1 = status1 &BDRV_BLOCK_ALLOCATED ; - status2 =bdrv_get_block_status_above (bs2,NULL , sector_num, - total_sectors2 - sector_num, - &pnum2,NULL ); + status2 =bdrv_block_status_above (bs2,NULL , + sector_num *BDRV_SECTOR_SIZE , + (total_sectors2 - sector_num) * +BDRV_SECTOR_SIZE , + &pnum2,NULL );if (status2 <0 ) { ret =3 ;error_report ("Sector allocation test failed for %s" , filename2);
@@ -1398,10 +1402,12 @@ static int img_compare(int argc, char **argv) } allocated2 = status2 &BDRV_BLOCK_ALLOCATED ;if (pnum1) { - nb_sectors =MIN (nb_sectors, pnum1); + nb_sectors =MIN (nb_sectors, +DIV_ROUND_UP (pnum1,BDRV_SECTOR_SIZE )); }if (pnum2) { - nb_sectors =MIN (nb_sectors, pnum2); + nb_sectors =MIN (nb_sectors, +DIV_ROUND_UP (pnum2,BDRV_SECTOR_SIZE )); }if (strict) {
@@ -1415,7 +1421,7 @@ static int img_compare(int argc, char **argv) } }if ((status1 &BDRV_BLOCK_ZERO ) && (status2 &BDRV_BLOCK_ZERO )) { - nb_sectors =MIN (pnum1, pnum2); + nb_sectors =DIV_ROUND_UP (MIN (pnum1, pnum2),BDRV_SECTOR_SIZE ); }else if (allocated1 == allocated2) {if (allocated1) { ret = blk_pread(blk1, sector_num << BDRV_SECTOR_BITS, buf1,
@@ -1593,23 +1599,24 @@ static int convert_iteration_sectors(ImgConvertState *s, int64_t sector_num) n =MIN (s->total_sectors - sector_num,BDRV_REQUEST_MAX_SECTORS );if (s->sector_next_status <= sector_num) { +int64_t count = n *BDRV_SECTOR_SIZE ; +if (s->target_has_backing) { -int64_t count = n *BDRV_SECTOR_SIZE ; ret =bdrv_block_status (blk_bs (s->src[src_cur]), (sector_num - src_cur_offset) *BDRV_SECTOR_SIZE , count, &count,NULL ); -assert (ret <0 ||QEMU_IS_ALIGNED (count,BDRV_SECTOR_SIZE )); - n = count >>BDRV_SECTOR_BITS ; }else { - ret =bdrv_get_block_status_above (blk_bs (s->src[src_cur]),NULL , - sector_num - src_cur_offset, - n, &n,NULL ); + ret =bdrv_block_status_above (blk_bs (s->src[src_cur]),NULL , + (sector_num - src_cur_offset) * +BDRV_SECTOR_SIZE , + count, &count,NULL ); }if (ret <0 ) {return ret; } + n =DIV_ROUND_UP (count,BDRV_SECTOR_SIZE );if (ret &BDRV_BLOCK_ZERO ) { s->status =BLK_ZERO ;
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 13/15] block: Convert bdrv_get_block_status_above() to bytes
Quoted 12 lines · Eric Blake
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access.
Changing the name of the function from
bdrv_get_block_status_above()tobdrv_block_status_above()ensures that the compiler enforces that all callers are updated. For now, theio.clayer still assert()s that all callers are sector-aligned, but that can be relaxed when a later patch implements byte-based block status in the drivers.
Quoted 8 lines
For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at
bdrv_block_status(). But some code, particularlybdrv_block_status(), gets a lot simpler because it no longer has to mess with sectors.For ease of review,
bdrv_get_block_status()was tackled separately.Signed-off-by Eric Blake <[email protected]>
PATCH v2 14/15 block: Align block status requests
In reply to Eric BlakeAny device that has request_alignment greater than 512 should be unable to report status at a finer granularity; it may also be simpler for such devices to be guaranteed that the block layer has rounded things out to the granularity boundary (the way the block layer already rounds all other I/O out). Besides, getting the code correct for super-sector alignment also benefits us for the fact that our public interface now has byte granularity, even though none of our drivers have byte-level callbacks.
Add an assertion in blkdebug that proves that the block layer never requests status of unaligned sections, similar to what it does on other requests (while still keeping the generic helper in place for when future patches add a throttle driver). Note note that iotest 177 already covers this (it would fail if you use just the blkdebug.c hunk without the io.c changes). Meanwhile, we can drop assertions in callers that no longer have to pass in sector-aligned addresses.
---
v2: new patch
--- include/block/block_int.h | 3 ++- block/blkdebug.c | 13 +++++++++++- block/io.c | 53 ++++++++++++++++++++++++++++++++--------------- 3 files changed, 50 insertions(+), 19 deletions(-)
include/block/block_int.h +2 -1
@@ -173,7 +173,8 @@ struct BlockDriver {* according to the current layer, and should not set * BDRV_BLOCK_ALLOCATED, but may set BDRV_BLOCK_RAW. See block.h * for the meaning of _DATA, _ZERO, and _OFFSET_VALID. The block -* layer guarantees non-NULL pnum and file. +* layer guarantees input aligned to request_alignment, as well as +* non-NULL pnum and file. */ int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs, int64_t sector_num, int nb_sectors, int *pnum,
block/blkdebug.c +12 -1
@@ -641,6 +641,17 @@ static int coroutine_fn blkdebug_co_pdiscard(BlockDriverState *bs,return bdrv_co_pdiscard (bs->file->bs, offset, bytes); } +static int64_t coroutine_fn blkdebug_co_get_block_status( +BlockDriverState *bs,int64_t sector_num,int nb_sectors,int *pnum, +BlockDriverState **file) +{ +assert (QEMU_IS_ALIGNED (sector_num | nb_sectors, +DIV_ROUND_UP (bs->bl.request_alignment, +BDRV_SECTOR_SIZE ))); +return bdrv_co_get_block_status_from_file (bs, sector_num, nb_sectors, + pnum, file); +} +static void blkdebug_close (BlockDriverState *bs) {BDRVBlkdebugState *s = bs->opaque;
@@ -915,7 +926,7 @@ static BlockDriver bdrv_blkdebug = { .bdrv_co_flush_to_disk = blkdebug_co_flush, .bdrv_co_pwrite_zeroes = blkdebug_co_pwrite_zeroes, .bdrv_co_pdiscard = blkdebug_co_pdiscard, - .bdrv_co_get_block_status = bdrv_co_get_block_status_from_file, + .bdrv_co_get_block_status = blkdebug_co_get_block_status, .bdrv_debug_event = blkdebug_debug_event, .bdrv_debug_breakpoint = blkdebug_debug_breakpoint,
block/io.c +36 -17
77 lines not on this page · raw message
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 14/15] block: Align block status requests
Quoted 9 lines · Eric Blake
Any device that has
request_alignmentgreater than 512 should be unable to report status at a finer granularity; it may also be simpler for such devices to be guaranteed that the block layer has rounded things out to the granularity boundary (the way the block layer already rounds all other I/O out). Besides, getting the code correct for super-sector alignment also benefits us for the fact that our public interface now has byte granularity, even though none of our drivers have byte-level callbacks.
Quoted 5 lines
Add an assertion in blkdebug that proves that the block layer never requests status of unaligned sections, similar to what it does on other requests (while still keeping the generic helper in place for when future patches add a throttle driver). Note note that iotest 177 already covers this (it would fail if you
Drop one "note"?
Quoted 86 lines
use just the
blkdebug.chunk without theio.cchanges). Meanwhile, we can drop assertions in callers that no longer have to pass in sector-aligned addresses.Signed-off-by Eric Blake <[email protected]>---
v2: new patch--- include/block/block_int.h | 3 ++- block/blkdebug.c | 13 +++++++++++- block/io.c | 53 ++++++++++++++++++++++++++++++++--------------- 3 files changed, 50 insertions(+), 19 deletions(-)include/block/block_int.h +2
-1@@ -173,7 +173,8 @@ struct BlockDriver {* according to the current layer, and should not set * BDRV_BLOCK_ALLOCATED, but may set BDRV_BLOCK_RAW. See block.h * for the meaning of _DATA, _ZERO, and _OFFSET_VALID. The block -* layer guarantees non-NULL pnum and file. +* layer guarantees input aligned to request_alignment, as well as +* non-NULL pnum and file. */ int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs, int64_t sector_num, int nb_sectors, int *pnum,block/blkdebug.c +12
-1@@ -641,6 +641,17 @@ static int coroutine_fn blkdebug_co_pdiscard(BlockDriverState *bs,return bdrv_co_pdiscard (bs->file->bs, offset, bytes); } +static int64_t coroutine_fn blkdebug_co_get_block_status( +BlockDriverState *bs,int64_t sector_num,int nb_sectors,int *pnum, +BlockDriverState **file) +{ +assert (QEMU_IS_ALIGNED (sector_num | nb_sectors, +DIV_ROUND_UP (bs->bl.request_alignment, +BDRV_SECTOR_SIZE ))); +return bdrv_co_get_block_status_from_file (bs, sector_num, nb_sectors, + pnum, file); +} +static void blkdebug_close (BlockDriverState *bs) {BDRVBlkdebugState *s = bs->opaque;@@ -915,7 +926,7 @@ static BlockDriver bdrv_blkdebug = { .bdrv_co_flush_to_disk = blkdebug_co_flush, .bdrv_co_pwrite_zeroes = blkdebug_co_pwrite_zeroes, .bdrv_co_pdiscard = blkdebug_co_pdiscard, - .bdrv_co_get_block_status = bdrv_co_get_block_status_from_file, + .bdrv_co_get_block_status = blkdebug_co_get_block_status, .bdrv_debug_event = blkdebug_debug_event, .bdrv_debug_breakpoint = blkdebug_debug_breakpoint,block/io.c +2
-10@@ -1746,7 +1746,8 @@ static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs,int64_t n;/* bytes */ int64_t ret, ret2;BlockDriverState *local_file =NULL ; -int count;/* sectors */ +int64_t aligned_offset, aligned_bytes; +uint32_t align;assert (pnum); total_size =bdrv_getlength (bs);@@ -1788,27 +1789,44 @@ static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs, }bdrv_inc_in_flight (bs); -/* -* TODO: Rather than require aligned offsets, we could instead -* round to the driver's request_alignment here, then touch up -* count afterwards back to the caller's expectations. -*/ -assert (QEMU_IS_ALIGNED (offset | bytes,BDRV_SECTOR_SIZE )); - ret = bs->drv->bdrv_co_get_block_status (bs, offset >>BDRV_SECTOR_BITS , - bytes >>BDRV_SECTOR_BITS , &count, - &local_file);
block/io.c static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs, · line 1798
Quoted 10 lines
block/io.c +7
-3-if (ret <0 ) { - *pnum =0 ; - goto out; + +/* Round out to request_alignment boundaries */ + align =MAX (bs->bl.request_alignment,BDRV_SECTOR_SIZE ); + aligned_offset =QEMU_ALIGN_DOWN (offset, align); + aligned_bytes =ROUND_UP (offset + bytes, align) - aligned_offset; + + {
Not sure why using a {} block here?
Quoted 50 lines
block/io.c +27
-4+int count;/* sectors */ + +assert (QEMU_IS_ALIGNED (aligned_offset | aligned_bytes, +BDRV_SECTOR_SIZE )); + ret = bs->drv->bdrv_co_get_block_status ( + bs, aligned_offset >>BDRV_SECTOR_BITS , + aligned_bytes >>BDRV_SECTOR_BITS , &count, &local_file); +if (ret <0 ) { + *pnum =0 ; + goto out; + } + *pnum = count *BDRV_SECTOR_SIZE ; + } + +/* Clamp pnum and ret to original request */ +assert (QEMU_IS_ALIGNED (*pnum, align)); + *pnum -= offset - aligned_offset; +if (aligned_offset >>BDRV_SECTOR_BITS != offset >>BDRV_SECTOR_BITS && + ret &BDRV_BLOCK_OFFSET_VALID ) { + ret +=QEMU_ALIGN_DOWN (offset - aligned_offset,BDRV_SECTOR_SIZE ); + } +if (*pnum > bytes) { + *pnum = bytes; } - *pnum = count *BDRV_SECTOR_SIZE ;if (ret &BDRV_BLOCK_RAW ) {assert (ret &BDRV_BLOCK_OFFSET_VALID && local_file); ret =bdrv_co_block_status (local_file, allocation, - ret &BDRV_BLOCK_OFFSET_MASK , + (ret &BDRV_BLOCK_OFFSET_MASK ) | + (offset & ~BDRV_BLOCK_OFFSET_MASK ), *pnum, pnum, &local_file); -assert (QEMU_IS_ALIGNED (*pnum,BDRV_SECTOR_SIZE )); goto out; }@@ -1832,7 +1850,8 @@ static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs,int64_t file_pnum; ret2 =bdrv_co_block_status (local_file, true, - ret &BDRV_BLOCK_OFFSET_MASK , + (ret &BDRV_BLOCK_OFFSET_MASK ) | + (offset & ~BDRV_BLOCK_OFFSET_MASK ), *pnum, &file_pnum,NULL );if (ret2 >=0 ) {/* Ignore errors. This is just providing extra information, it Signature · 1 line
2.9.4
Fam
Re: [Qemu-devel] [PATCH v2 14/15] block: Align block status requests
Quoted 10 lines · Fam Zheng
Quoted 9 lines · Eric Blake
Any device that has
request_alignmentgreater than 512 should be unable to report status at a finer granularity; it may also be simpler for such devices to be guaranteed that the block layer has rounded things out to the granularity boundary (the way the block layer already rounds all other I/O out). Besides, getting the code correct for super-sector alignment also benefits us for the fact that our public interface now has byte granularity, even though none of our drivers have byte-level callbacks.
Quoted 7 lines
Quoted 5 lines
Add an assertion in blkdebug that proves that the block layer never requests status of unaligned sections, similar to what it does on other requests (while still keeping the generic helper in place for when future patches add a throttle driver). Note note that iotest 177 already covers this (it would fail if you
Drop one "note"?
Indeed. There are studies on how people read that show that redundant words that cross a line boundaries are the most easy to mentally overlook.
Quoted 10 lines
block/io.c static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs, · line 1798
Quoted 6 lines
block/io.c +6
-0+/* Round out to request_alignment boundaries */ + align =MAX (bs->bl.request_alignment,BDRV_SECTOR_SIZE ); + aligned_offset =QEMU_ALIGN_DOWN (offset, align); + aligned_bytes =ROUND_UP (offset + bytes, align) - aligned_offset; + + {Not sure why using a {} block here?
Quoted 1 line
+ int count; /* sectors */
Because it makes it easier (less indentation churn) to delete the code when series 4 later deletes the .bdrv_co_get_block_status sector-based callback in favor of the newer .bdrv_co_block_status byte-based (patch 16/15 which start series 4 turns it into an if statement, then a later patch deletes the entire conditional); it is also justifiable because it creates a tighter scope for 'int count' which is needed only on the boundary of sector-based operations when the rest of the function is byte-based (rather than declaring the helper variable up front). I'll have to call it out more specifically in the commit message as intentional.
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3266 Virtualization: qemu.org | libvirt.org
Fam Zheng
Reviewed-byRe: [Qemu-devel] [PATCH v2 14/15] block: Align block status requests
Quoted 34 lines · Eric Blake
Quoted 10 lines · Fam Zheng
Quoted 9 lines · Eric Blake
Any device that has
request_alignmentgreater than 512 should be unable to report status at a finer granularity; it may also be simpler for such devices to be guaranteed that the block layer has rounded things out to the granularity boundary (the way the block layer already rounds all other I/O out). Besides, getting the code correct for super-sector alignment also benefits us for the fact that our public interface now has byte granularity, even though none of our drivers have byte-level callbacks.Quoted 7 lines
Quoted 5 lines
Add an assertion in blkdebug that proves that the block layer never requests status of unaligned sections, similar to what it does on other requests (while still keeping the generic helper in place for when future patches add a throttle driver). Note note that iotest 177 already covers this (it would fail if you
Drop one "note"?
Indeed. There are studies on how people read that show that redundant words that cross a line boundaries are the most easy to mentally overlook.
Quoted 10 lines
block/io.c static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs, · line 1798
Quoted 6 lines
block/io.c +6
-0+/* Round out to request_alignment boundaries */ + align =MAX (bs->bl.request_alignment,BDRV_SECTOR_SIZE ); + aligned_offset =QEMU_ALIGN_DOWN (offset, align); + aligned_bytes =ROUND_UP (offset + bytes, align) - aligned_offset; + + {Not sure why using a {} block here?
Quoted 1 line
+ int count; /* sectors */
Quoted 9 lines
Because it makes it easier (less indentation churn) to delete the code when series 4 later deletes the .bdrv_co_get_block_status sector-based callback in favor of the newer .bdrv_co_block_status byte-based (patch 16/15 which start series 4 turns it into an if statement, then a later patch deletes the entire conditional); it is also justifiable because it creates a tighter scope for 'int count' which is needed only on the boundary of sector-based operations when the rest of the function is byte-based (rather than declaring the helper variable up front). I'll have to call it out more specifically in the commit message as intentional.
Thanks for explaining, with the syntax error fixed in the commit message:
PATCH v2 15/15 qemu-io: Relax 'alloc' now that block-status doesn't assert
In reply to Eric BlakePreviously, the alloc command required that input parameters be sector-aligned and clamped to 32 bits, because the underlying bdrv_is_allocated used a 32-bit parameter and asserted aligned inputs. But now that we have fixed block status to report a 64-bit bytes value, and to properly round requests on behalf of guests, we can pass any values, and can use qemu-io to add coverage that our rounding is correct regardless of the guest alignment constraints.
Update iotest 177 to intentionally probe block status at unaligned boundaries, which also required tweaking the image prep to leave an unallocated portion to the image under test.
---
v2: new patch
--- qemu-io-cmds.c | 13 ------------- tests/qemu-iotests/177 | 11 +++++++++-- tests/qemu-iotests/177.out | 18 +++++++++++++----- 3 files changed, 22 insertions(+), 20 deletions(-)
qemu-io-cmds.c +0 -13
@@ -1769,10 +1769,6 @@ static int alloc_f(BlockBackend *blk, int argc, char **argv)if (offset <0 ) {print_cvtnum_err (offset, argv[1 ]);return 0 ; - }else if (!QEMU_IS_ALIGNED (offset,BDRV_SECTOR_SIZE )) { -printf ("%" PRId64" is not a sector-aligned value for 'offset'\n" , - offset); -return 0 ; }if (argc ==3 ) {
@@ -1780,19 +1776,10 @@ static int alloc_f(BlockBackend *blk, int argc, char **argv)if (count <0 ) {print_cvtnum_err (count, argv[2 ]);return 0 ; - }else if (count >INT_MAX *BDRV_SECTOR_SIZE ) { -printf ("length argument cannot exceed %llu, given %s\n" , -INT_MAX *BDRV_SECTOR_SIZE , argv[2 ]); -return 0 ; } }else { count =BDRV_SECTOR_SIZE ; } -if (!QEMU_IS_ALIGNED (count,BDRV_SECTOR_SIZE )) { -printf ("%" PRId64" is not a sector-aligned value for 'count'\n" , - count); -return 0 ; - } remaining = count; sum_alloc =0 ;
tests/qemu-iotests/177 +9 -2
@@ -51,7 +51,7 @@ echo "== setting up files ==" TEST_IMG="$TEST_IMG.base" _make_test_img $size $QEMU_IO -c "write -P 11 0 $size" "$TEST_IMG.base" | _filter_qemu_io _make_test_img -b "$TEST_IMG.base" -$QEMU_IO -c "write -P 22 0 $size" "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "write -P 22 0 110M" "$TEST_IMG" | _filter_qemu_io # Limited to 64k max-transfer echo
@@ -82,6 +82,12 @@ $QEMU_IO -c "open -o $options,$limits blkdebug::$TEST_IMG" \ -c "discard 80000001 30M" | _filter_qemu_io echo +echo "== block status smaller than alignment ==" +limits=align=4k +$QEMU_IO -c "open -o $options,$limits blkdebug::$TEST_IMG" \ + -c "alloc 1 1" -c "alloc 0x6dffff0 1000" -c map | _filter_qemu_io + +echo echo "== verify image content ==" function verify_io()
@@ -103,7 +109,8 @@ function verify_io() echo read -P 0 32M 32M echo read -P 22 64M 13M echo read -P $discarded 77M 29M - echo read -P 22 106M 22M + echo read -P 22 106M 4M + echo read -P 11 110M 18M } verify_io | $QEMU_IO -r "$TEST_IMG" | _filter_qemu_io
tests/qemu-iotests/177.out +13 -5
@@ -5,8 +5,8 @@ Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 wrote 134217728/134217728 bytes at offset 0 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base -wrote 134217728/134217728 bytes at offset 0 -128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 115343360/115343360 bytes at offset 0 +110 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) == constrained alignment and max-transfer == wrote 131072/131072 bytes at offset 1000
@@ -26,6 +26,12 @@ wrote 33554432/33554432 bytes at offset 33554432 discard 31457280/31457280 bytes at offset 80000001 30 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +== block status smaller than alignment == +1/1 bytes allocated at offset 1 bytes +16/1000 bytes allocated at offset 110 MiB +110 MiB (0x6e00000) bytes allocated at offset 0 bytes (0x0) +18 MiB (0x1200000) bytes not allocated at offset 110 MiB (0x6e00000) + == verify image content == read 1000/1000 bytes at offset 0 1000 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -43,12 +49,14 @@ read 13631488/13631488 bytes at offset 67108864 13 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) read 30408704/30408704 bytes at offset 80740352 29 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -read 23068672/23068672 bytes at offset 111149056 -22 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +read 4194304/4194304 bytes at offset 111149056 +4 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +read 18874368/18874368 bytes at offset 115343360 +18 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Offset Length File 0 0x800000 TEST_DIR/t.IMGFMT 0x900000 0x2400000 TEST_DIR/t.IMGFMT 0x3c00000 0x1100000 TEST_DIR/t.IMGFMT -0x6a00000 0x1600000 TEST_DIR/t.IMGFMT +0x6a00000 0x400000 TEST_DIR/t.IMGFMT No errors were found on the image. *** done
Signature · 1 line
2.9.4
Re: [Qemu-devel] [PATCH v2 15/15] qemu-io: Relax 'alloc' now that block-status doesn't assert
Quoted 9 lines · Eric Blake
Previously, the alloc command required that input parameters be sector-aligned and clamped to 32 bits, because the underlying
bdrv_is_allocatedused a 32-bit parameter and asserted aligned inputs. But now that we have fixed block status to report a 64-bit bytes value, and to properly round requests on behalf of guests, we can pass any values, and can use qemu-io to add coverage that our rounding is correct regardless of the guest alignment constraints.
Quoted 5 lines
Update iotest 177 to intentionally probe block status at unaligned boundaries, which also required tweaking the image prep to leave an unallocated portion to the image under test.
Signed-off-by Eric Blake <[email protected]>
[Qemu-devel] [RFC PATCH v2 16/15] block: Add .bdrv_co_block_status() callback
In reply to Eric BlakeWe are gradually moving away from sector-based interfaces, towards byte-based. Now that the block layer exposes byte-based allocation, it's time to tackle the drivers. Add a new callback that operates on as small as byte boundaries. Subsequent patches will then update individual drivers, then finally remove .bdrv_co_get_block_status(). The old code now uses a goto in order to minimize churn at that later removal.
The new code also passes through the 'allocation' hint, which will allow subsequent patches to further optimize callers that only care about how much of the image is allocated, rather than which offsets the allocation actually maps to.
Note that most drivers give sector-aligned answers, except at end-of-file, even when request_alignment is smaller than a sector. However, bdrv_getlength() is sector-aligned (even though it gives a byte answer), often by exceeding the actual file size. If we were to give back strict results, at least file-posix.c would report a transition from DATA to HOLE at the end of a file even in the middle of a sector, which can throw off callers; so we intentionally lie and state that any partial sector at the end of a file has the same status for the entire sector.
---
v2: improve alignment handling, add additional 'allocation' argument for future optimization potential, ensure all iotests still pass
Sending as an RFC as part of my third series; this patch is technically the start of my fourth series, but given the rebase churn I've had elsewhere, it can't hurt to get the interface looked at in case it needs tweaking
--- include/block/block_int.h | 9 ++++++++- block/io.c | 27 ++++++++++++++++++++++++--- 2 files changed, 32 insertions(+), 4 deletions(-)
include/block/block_int.h +8 -1
@@ -172,13 +172,20 @@ struct BlockDriver {* bdrv_is_allocated[_above]. The driver should answer only * according to the current layer, and should not set * BDRV_BLOCK_ALLOCATED, but may set BDRV_BLOCK_RAW. See block.h -* for the meaning of _DATA, _ZERO, and _OFFSET_VALID. The block +* for the meaning of _DATA, _ZERO, and _OFFSET_VALID. As a hint, +* the flag allocation is true if the caller cares more about +* learning how much of the image is allocated, without regards to +* a breakdown by offset (a driver may either ignore the hint, or +* avoid _OFFSET_VALID to provide a larger *pnum). The block * layer guarantees input aligned to request_alignment, as well as * non-NULL pnum and file. */ int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs,int64_t sector_num,int nb_sectors,int *pnum,BlockDriverState **file); + int64_t coroutine_fn (*bdrv_co_block_status)(BlockDriverState *bd, +bool allocation,int64_t offset,int64_t bytes,int64_t *pnum, +BlockDriverState **file);/* * Invalidate any cached meta-data.
block/io.c +24 -3
@@ -1771,7 +1771,7 @@ static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs, bytes = n; } -if (!bs->drv->bdrv_co_get_block_status) { +if (!bs->drv->bdrv_co_get_block_status && !bs->drv->bdrv_co_block_status) { *pnum = bytes; ret =BDRV_BLOCK_DATA |BDRV_BLOCK_ALLOCATED ;if (offset + bytes == total_size) {
@@ -1791,11 +1791,14 @@ static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs,bdrv_inc_in_flight (bs);/* Round out to request_alignment boundaries */ - align =MAX (bs->bl.request_alignment,BDRV_SECTOR_SIZE ); + align = bs->bl.request_alignment; +if (bs->drv->bdrv_co_get_block_status && align <BDRV_SECTOR_SIZE ) { + align =BDRV_SECTOR_SIZE ; + } aligned_offset =QEMU_ALIGN_DOWN (offset, align); aligned_bytes =ROUND_UP (offset + bytes, align) - aligned_offset; - { +if (bs->drv->bdrv_co_get_block_status) {int count;/* sectors */ assert(QEMU_IS_ALIGNED(aligned_offset | aligned_bytes,
@@ -1808,8 +1811,26 @@ static int64_t coroutine_fn bdrv_co_block_status(BlockDriverState *bs, goto out; } *pnum = count *BDRV_SECTOR_SIZE ; + goto refine; } + ret = bs->drv->bdrv_co_block_status (bs, false, aligned_offset, + aligned_bytes, pnum, &local_file); +if (ret <0 ) { + *pnum =0 ; + goto out; + } + +/* +* total_size is always sector-aligned, by sometimes exceeding actual +* file size. Expand pnum if it lands mid-sector due to end-of-file. +*/ +if (QEMU_ALIGN_UP (*pnum + aligned_offset, +BDRV_SECTOR_SIZE ) == total_size) { + *pnum = total_size - aligned_offset; + } + + refine:/* Clamp pnum and ret to original request */ assert (QEMU_IS_ALIGNED (*pnum, align)); *pnum -= offset - aligned_offset;
Signature · 1 line
2.9.4
Re: [Qemu-devel] [RFC PATCH v2 16/15] block: Add .bdrv_co_block_status() callback
Quoted 51 lines · Eric Blake
We are gradually moving away from sector-based interfaces, towards byte-based. Now that the block layer exposes byte-based allocation, it's time to tackle the drivers. Add a new callback that operates on as small as byte boundaries. Subsequent patches will then update individual drivers, then finally remove .bdrv_co_get_block_status(). The old code now uses a goto in order to minimize churn at that later removal.
The new code also passes through the 'allocation' hint, which will allow subsequent patches to further optimize callers that only care about how much of the image is allocated, rather than which offsets the allocation actually maps to.
Note that most drivers give sector-aligned answers, except at end-of-file, even when
request_alignmentis smaller than a sector. However,bdrv_getlength()is sector-aligned (even though it gives a byte answer), often by exceeding the actual file size. If we were to give back strict results, at leastfile-posix.cwould report a transition from DATA to HOLE at the end of a file even in the middle of a sector, which can throw off callers; so we intentionally lie and state that any partial sector at the end of a file has the same status for the entire sector.Signed-off-by Eric Blake <[email protected]>---
v2: improve alignment handling, add additional 'allocation' argument for future optimization potential, ensure all iotests still passSending as an RFC as part of my third series; this patch is technically the start of my fourth series, but given the rebase churn I've had elsewhere, it can't hurt to get the interface looked at in case it needs tweaking
--- include/block/block_int.h | 9 ++++++++- block/io.c | 27 ++++++++++++++++++++++++--- 2 files changed, 32 insertions(+), 4 deletions(-)include/block/block_int.h +4
-1@@ -172,13 +172,20 @@ struct BlockDriver {* bdrv_is_allocated[_above]. The driver should answer only * according to the current layer, and should not set * BDRV_BLOCK_ALLOCATED, but may set BDRV_BLOCK_RAW. See block.h -* for the meaning of _DATA, _ZERO, and _OFFSET_VALID. The block +* for the meaning of _DATA, _ZERO, and _OFFSET_VALID. As a hint, +* the flag allocation is true if the caller cares more about +* learning how much of the image is allocated, without regards to +* a breakdown by offset (a driver may either ignore the hint, or
include/block/block_int.h struct BlockDriver { · line 188
Quoted 10 lines
include/block/block_int.h +4
-0+* avoid _OFFSET_VALID to provide a larger *pnum). The block * layer guarantees input aligned to request_alignment, as well as * non-NULL pnum and file. */ int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs,int64_t sector_num,int nb_sectors,int *pnum,BlockDriverState **file); + int64_t coroutine_fn (*bdrv_co_block_status)(BlockDriverState *bd, +bool allocation,int64_t offset,int64_t bytes,int64_t *pnum, +BlockDriverState **file);
Apart from my earlier question regarding the naming of "allocation", looks fine.
I haven't reviewed the implementation though.
Fam