iavf: Add helper to check if iavf_remove() is in progress
Subsystems (2)
PATCH 1/2 iavf: Add helper to check if iavf_remove() is in progress
From: Brett Creeley <[email protected]>
Currently the driver checks if the __IAVF_IN_REMOVE_TASK bit is set in the adapter's crit_section bitmap. This is fine, but if the implementation were to ever change, i.e. a mutex was introduced all of the callers of test_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section) would have to change. Fix this by introducing the iavf_is_remove_in_progress() helper function.
--- drivers/net/ethernet/intel/iavf/iavf.h | 1 + drivers/net/ethernet/intel/iavf/iavf_main.c | 17 ++++++++++++----- 2 files changed, 13 insertions(+), 5 deletions(-)
drivers/net/ethernet/intel/iavf/iavf.h +1 -0
@@ -502,6 +502,7 @@ int iavf_parse_vf_resource_msg(struct iavf_adapter *adapter);void iavf_schedule_reset (struct iavf_adapter *adapter);void iavf_schedule_request_stats (struct iavf_adapter *adapter);void iavf_reset (struct iavf_adapter *adapter); +bool iavf_is_remove_in_progress (struct iavf_adapter *adapter);void iavf_set_ethtool_ops (struct net_device *netdev);void iavf_update_stats (struct iavf_adapter *adapter);void iavf_reset_interrupt_capability (struct iavf_adapter *adapter);
drivers/net/ethernet/intel/iavf/iavf_main.c +12 -5
@@ -268,6 +268,15 @@ int iavf_lock_timeout(struct mutex *lock, unsigned int msecs)return -1 ; } +/** +* iavf_is_remove_in_progress - Check if a iavf_remove() is in progress +* @adapter: board private structure +*/ +bool iavf_is_remove_in_progress (struct iavf_adapter *adapter) +{ +return test_bit (__IAVF_IN_REMOVE_TASK, &adapter->crit_section); +} +/** * iavf_schedule_reset - Set the flags and schedule a reset event * @adapter: board private structure
@@ -2588,8 +2597,7 @@ static void iavf_watchdog_task(struct work_struct *work) msecs_to_jiffies(1));return ;case __IAVF_INIT_FAILED: -if (test_bit (__IAVF_IN_REMOVE_TASK, - &adapter->crit_section)) { +if (iavf_is_remove_in_progress (adapter)) {/* Do not update the state and do not reschedule * watchdog task, iavf_remove should handle this state * as it can loop forever
@@ -2613,8 +2621,7 @@ static void iavf_watchdog_task(struct work_struct *work)queue_delayed_work (iavf_wq, &adapter->watchdog_task,HZ );return ;case __IAVF_COMM_FAILED: -if (test_bit (__IAVF_IN_REMOVE_TASK, - &adapter->crit_section)) { +if (iavf_is_remove_in_progress (adapter)) {/* Set state to __IAVF_INIT_FAILED and perform remove * steps. Remove IAVF_FLAG_PF_COMMS_FAILED so the task * doesn't bring the state back to __IAVF_COMM_FAILED.
@@ -3057,7 +3064,7 @@ static void iavf_adminq_task(struct work_struct *work)if ((adapter->flags &IAVF_FLAG_SETUP_NETDEV_FEATURES )) {if (adapter->netdev_registered || - !test_bit (__IAVF_IN_REMOVE_TASK, &adapter->crit_section)) { + !(iavf_is_remove_in_progress (adapter))) {struct net_device *netdev = adapter->netdev;rtnl_lock ();
Signature · 1 line
2.27.0
PATCH 2/2 iavf: Fix call trace during removing iavf driver
From: Grzegorz Szczurek <[email protected]>
If VF has configured tc qdisc with number of queues less than original set and then the driver went in removing process, tc resources are also releasing. Attempt of modify real num tx/rx in this state is causing call trace, because kernel is trying to releasing uninitialized queues.
Fix by not modifying the number of queues when removing a driver.
--- drivers/net/ethernet/intel/iavf/iavf_main.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/net/ethernet/intel/iavf/iavf_main.c +3 -0
@@ -3478,6 +3478,9 @@ static int __iavf_setup_tc(struct net_device *netdev, void *type_data) } } exit: +if (iavf_is_remove_in_progress (adapter)) +return 0 ; +return ret; }
Signature · 1 line
2.27.0
PATCH 2/2 iavf: Fix call trace during removing iavf driver
Dear Jedrzej, dear Grzegorz,
Am 27.05.22 um 10:09 schrieb Jedrzej Jagielski:
Quoted 1 line
From: Grzegorz Szczurek <[email protected]>
For the summary, maybe be more specific about the action:
Quoted 4 lines
Do not modify queue number when removing iavf driver
If VF has configured tc qdisc with number of queues less than original set and then the driver went in removing process, tc resources are also
s/went/goes/
Quoted 1 line
releasing. Attempt of modify real num tx/rx in this state is causing
released?
Quoted 1 line
call trace, because kernel is trying to releasing uninitialized queues.
to release
Please add parts of the call trace.
Quoted 2 lines
Fix by not modifying the number of queues when removing a driver.
Fix *it* by ?
Kind regards,
Paul
Quoted 22 lines
Fixes d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")Signed-off-by Grzegorz Szczurek <[email protected]>Signed-off-by Jedrzej Jagielski <[email protected]>--- drivers/net/ethernet/intel/iavf/iavf_main.c | 3 +++ 1 file changed, 3 insertions(+)drivers/net/ethernet/intel/iavf/iavf_main.c +3
-0@@ -3478,6 +3478,9 @@ static int __iavf_setup_tc(struct net_device *netdev, void *type_data) } } exit: +if (iavf_is_remove_in_progress (adapter)) +return 0 ; +return ret; }
Jagielski
PATCH 2/2 iavf: Fix call trace during removing iavf driver
Hello Paul,
Quoted 21 lines
Dear Jedrzej, dear Grzegorz,
Am 27.05.22 um 10:09 schrieb Jedrzej Jagielski:
Quoted 1 line
From: Grzegorz Szczurek <[email protected]>
For the summary, maybe be more specific about the action:
Quoted 4 lines
Do not modify queue number when removing iavf driver
If VF has configured tc qdisc with number of queues less than original set and then the driver went in removing process, tc resources are also
s/went/goes/
Quoted 1 line
releasing. Attempt of modify real num tx/rx in this state is causing
released?
Quoted 1 line
call trace, because kernel is trying to releasing uninitialized queues.
Quoted 8 lines
to release
Please add parts of the call trace.
Quoted 2 lines
Fix by not modifying the number of queues when removing a driver.
Fix *it* by ?
Thank you for your notices. Commit msg will be corrected.
Quoted 14 lines
Kind regards,
Paul
Quoted 8 lines
Fixes d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")Signed-off-by Grzegorz Szczurek <[email protected]>Signed-off-by Jedrzej Jagielski <[email protected]>--- drivers/net/ethernet/intel/iavf/iavf_main.c | 3 +++ 1 file changed, 3 insertions(+)
Quoted 14 lines
Quoted 5 lines
drivers/net/ethernet/intel/iavf/iavf_main.c +0
-0drivers/net/ethernet/intel/iavf/iavf_main.c static int __iavf_setup_tc(struct net_device *netdev, void *type_data) · line 3486
Quoted 9 lines
drivers/net/ethernet/intel/iavf/iavf_main.c +3
-0@@ -3478,6 +3478,9 @@ static int __iavf_setup_tc(struct net_device *netdev, void *type_data) } } exit: +if (iavf_is_remove_in_progress (adapter)) +return 0 ; +return ret; }
Best regards,
Jedrzej
-----Original Message-----
From: Paul Menzel <[email protected]>
Sent: pi?tek, 27 maja 2022 14:21
To: Jagielski, Jedrzej <[email protected]>; Szczurek, GrzegorzX <[email protected]>
Cc: intel-wired-lan at lists.osuosl.org
Subject: Re: [Intel-wired-lan] [PATCH net v1 2/2] iavf: Fix call trace during removing iavf driver
Dear Jedrzej, dear Grzegorz,
Am 27.05.22 um 10:09 schrieb Jedrzej Jagielski:
Quoted 1 line
From: Grzegorz Szczurek <[email protected]>
For the summary, maybe be more specific about the action:
Quoted 4 lines
Do not modify queue number when removing iavf driver
If VF has configured tc qdisc with number of queues less than original set and then the driver went in removing process, tc resources are also
s/went/goes/
Quoted 1 line
releasing. Attempt of modify real num tx/rx in this state is causing
released?
Quoted 1 line
call trace, because kernel is trying to releasing uninitialized queues.
to release
Please add parts of the call trace.
Quoted 2 lines
Fix by not modifying the number of queues when removing a driver.
Fix *it* by ?
Kind regards,
Paul
Quoted 22 lines
Fixes d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")Signed-off-by Grzegorz Szczurek <[email protected]>Signed-off-by Jedrzej Jagielski <[email protected]>--- drivers/net/ethernet/intel/iavf/iavf_main.c | 3 +++ 1 file changed, 3 insertions(+)drivers/net/ethernet/intel/iavf/iavf_main.c +3
-0@@ -3478,6 +3478,9 @@ static int __iavf_setup_tc(struct net_device *netdev, void *type_data) } } exit: +if (iavf_is_remove_in_progress (adapter)) +return 0 ; +return ret; }
Tony Nguyen
maintainerPATCH 2/2 iavf: Fix call trace during removing iavf driver
In reply to Jedrzej JagielskiQuoted 21 lines · Jedrzej Jagielski
From: Grzegorz Szczurek <[email protected]>
If VF has configured tc qdisc with number of queues less than original set and then the driver went in removing process, tc resources are also releasing. Attempt of modify real num tx/rx in this state is causing call trace, because kernel is trying to releasing uninitialized queues.
Fix by not modifying the number of queues when removing a driver.
Fixes d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")Signed-off-by Grzegorz Szczurek <[email protected]>Signed-off-by Jedrzej Jagielski <[email protected]>--- drivers/net/ethernet/intel/iavf/iavf_main.c | 3 +++ 1 file changed, 3 insertions(+)drivers/net/ethernet/intel/iavf/iavf_main.c +0
-0
drivers/net/ethernet/intel/iavf/iavf_main.c static int __iavf_setup_tc(struct net_device *netdev, void *type_data) · line 3482
Quoted 5 lines
drivers/net/ethernet/intel/iavf/iavf_main.c +2
-0@@ -3478,6 +3478,9 @@ static int __iavf_setup_tc(struct net_device *netdev, void *type_data) } } exit: +if (iavf_is_remove_in_progress (adapter)) +return 0 ;
Why do we check this condition at the end of the function after everything is done instead of the beginning?
Also, this function from patch 1, is a refactor for checking a bit. Refactors shouldn't be going to net unless necessary. This patch can directly check the bit and the other patch can be sent as a follow on after this patch has been applied.
Thanks,
Tony
Quoted 3 lines
drivers/net/ethernet/intel/iavf/iavf_main.c +0
-0return ret; }
Re: [Intel-wired-lan] [PATCH net v1 2/2] iavf: Fix call trace during removing iavf driver
Quoted 17 lines · Jedrzej Jagielski
Quoted 16 lines
From: Grzegorz Szczurek <[email protected]>
If VF has configured tc qdisc with number of queues less than original set and then the driver went in removing process, tc resources are also releasing. Attempt of modify real num tx/rx in this state is causing call trace, because kernel is trying to releasing uninitialized queues.
Fix by not modifying the number of queues when removing a driver.
Fixes d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")Signed-off-by Grzegorz Szczurek <[email protected]>Signed-off-by Jedrzej Jagielski <[email protected]>--- drivers/net/ethernet/intel/iavf/iavf_main.c | 3 +++ 1 file changed, 3 insertions(+)
Quoted 13 lines
drivers/net/ethernet/intel/iavf/iavf_main.c static int __iavf_setup_tc(struct net_device *netdev, void *type_data) · line 3482
Quoted 10 lines
drivers/net/ethernet/intel/iavf/iavf_main.c +2
-0@@ -3478,6 +3478,9 @@ static int __iavf_setup_tc(struct net_device *netdev, void *type_data) } } exit: +if (iavf_is_remove_in_progress (adapter)) +return 0 ;Why do we check this condition at the end of the function after everything is done instead of the beginning?
Because we want the tc resources to be cleared at first - that is delete queue_channel section which restores the deafult txrx ques values. Then there is goto jump and after that our check is added. Also that check blocks the final txrx update so place it there seems to be sensible.
Quoted 6 lines
Also, this function from patch 1, is a refactor for checking a bit. Refactors shouldn't be going to net unless necessary. This patch can directly check the bit and the other patch can be sent as a follow on after this patch has been applied.
Sure these two patches will be splitted and applied to different trees.
Quoted 5 lines
Thanks,
TonyQuoted 2 lines
drivers/net/ethernet/intel/iavf/iavf_main.c +0
-0return ret; }
Thanks,
Jedrzej
_______________________________________________
Intel-wired-lan mailing list
[email protected]
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
Tony Nguyen
maintainerPATCH 1/2 iavf: Add helper to check if iavf_remove() is in progress
In reply to Jedrzej JagielskiQuoted 8 lines · Jedrzej Jagielski
From: Brett Creeley <[email protected]>
Currently the driver checks if the
__IAVF_IN_REMOVE_TASKbit is set in the adapter'scrit_sectionbitmap. This is fine, but if the implementation were to ever change, i.e. a mutex was introduced all of the callers oftest_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section)would have to change. Fix this by introducing theiavf_is_remove_in_progress()helper function.
As I mentioned in patch 2, this refactor should go to net-next, not net.
Thanks,
Tony
Quoted 2 lines
Signed-off-by Brett Creeley <[email protected]>Signed-off-by Jedrzej Jagielski <[email protected]>
Jagielski
PATCH 1/2 iavf: Add helper to check if iavf_remove() is in progress
Quoted 11 lines · Jedrzej Jagielski
Quoted 8 lines
From: Brett Creeley <[email protected]>
Currently the driver checks if the
__IAVF_IN_REMOVE_TASKbit is set in the adapter'scrit_sectionbitmap. This is fine, but if the implementation were to ever change, i.e. a mutex was introduced all of the callers oftest_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section)would have to change. Fix this by introducing theiavf_is_remove_in_progress()helper function.As I mentioned in patch 2, this refactor should go to net-next, not net.
Sure, I will send it to net-next. I just thought that if this patch contains dependencies needed by another patch fixing call trace I can send it as a patch serie directly to net.
I will use bit check in the other patch as you wrote.
Quoted 3 lines
Thanks,
Tony
Thanks,
Jedrzej
Quoted 3 lines
Quoted 3 lines
Signed-off-by Brett Creeley <[email protected]>Signed-off-by Jedrzej Jagielski <[email protected]>
-----Original Message-----
From: Nguyen, Anthony L <[email protected]>
Sent: pi?tek, 27 maja 2022 18:58
To: Jagielski, Jedrzej <[email protected]>; intel-wired-lan at lists.osuosl.org
Cc: Brett Creeley <[email protected]>
Subject: Re: [Intel-wired-lan] [PATCH net v1 1/2] iavf: Add helper to check if iavf_remove() is in progress
Quoted 8 lines · Jedrzej Jagielski
From: Brett Creeley <[email protected]>
Currently the driver checks if the
__IAVF_IN_REMOVE_TASKbit is set in the adapter'scrit_sectionbitmap. This is fine, but if the implementation were to ever change, i.e. a mutex was introduced all of the callers oftest_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section)would have to change. Fix this by introducing theiavf_is_remove_in_progress()helper function.
As I mentioned in patch 2, this refactor should go to net-next, not net.
Thanks,
Tony
Quoted 2 lines
Signed-off-by Brett Creeley <[email protected]>Signed-off-by Jedrzej Jagielski <[email protected]>