fixdep: use fflush() and ferror() to ensure successful write to files
PATCH 1/1 fixdep: use fflush() and ferror() to ensure successful write to files
Checking the return value of (v)printf does not ensure the successful write to the .cmd file.
Call fflush() and ferror() to make sure that everything has been written to the file.
---
scripts/basic/fixdep.c | 44 ++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 27 deletions(-)
scripts/basic/fixdep.c +17 -27
@@ -105,25 +105,6 @@ static void usage(void)exit (1 ); } -/* -* In the intended usage of this program, the stdout is redirected to .*.cmd -* files. The return value of printf() must be checked to catch any error, -* e.g. "No space left on device". -*/ -static void xprintf (const char *format, ...) -{ -va_list ap; -int ret; - -va_start (ap, format); - ret =vprintf (format, ap); -if (ret <0 ) { -perror ("fixdep" ); -exit (1 ); - } -va_end (ap); -} -struct item {struct item *next;unsigned int len;
@@ -189,7 +170,7 @@ static void use_config(const char *m, int slen)define_config (m, slen, hash);/* Print out a dependency path from a symbol name. */ -xprintf (" $(wildcard include/config/%.*s) \\\n" , slen, m); +printf (" $(wildcard include/config/%.*s) \\\n" , slen, m); }/* test if s ends in sub */
@@ -318,13 +299,13 @@ static void parse_dep_file(char *m, const char *target)*/ if (!saw_any_target) { saw_any_target =1 ; -xprintf ("source_%s := %s\n\n" , - target, m); -xprintf ("deps_%s := \\\n" , target); +printf ("source_%s := %s\n\n" , + target, m); +printf ("deps_%s := \\\n" , target); } is_first_dep =0 ; }else { -xprintf (" %s \\\n" , m); +printf (" %s \\\n" , m); } buf =read_file (m);
@@ -347,8 +328,8 @@ static void parse_dep_file(char *m, const char *target)exit (1 ); } -xprintf ("\n%s: $(deps_%s)\n\n" , target, target); -xprintf ("$(deps_%s):\n" , target); +printf ("\n%s: $(deps_%s)\n\n" , target, target); +printf ("$(deps_%s):\n" , target); }int main (int argc,char *argv[])
@@ -363,11 +344,20 @@ int main(int argc, char *argv[]) target = argv[2 ]; cmdline = argv[3 ]; -xprintf ("cmd_%s := %s\n\n" , target, cmdline); +printf ("cmd_%s := %s\n\n" , target, cmdline); buf =read_file (depfile);parse_dep_file (buf, target);free (buf); +fflush (stdout); + +/* +* In the intended usage, the stdout is redirected to .*.cmd files. +* Call ferror() to catch errors such as "No space left on device". +*/ +if (ferror (stdout)) +exit (1 ); +return 0 ; }
Signature · 1 line
2.32.0
From: Masahiro Yamada
Quoted 10 lines
Sent: 21 February 2022 16:43
To: [email protected]Checking the return value of (v)printf does not ensure the successful write to the .cmd file.
Call
fflush()andferror()to make sure that everything has been written to the file.Signed-off-by Masahiro Yamada <[email protected]>
I'll note that you've lost the perror("fixdep"). But I suspect that isn't very meaningful. If the disk is full it'd probably get lost anyway.
Quoted 96 lines
---
scripts/basic/fixdep.c | 44 ++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 27 deletions(-)scripts/basic/fixdep.c +17
-28@@ -105,25 +105,6 @@ static void usage(void)exit (1 ); } -/* -* In the intended usage of this program, the stdout is redirected to .*.cmd -* files. The return value of printf() must be checked to catch any error, -* e.g. "No space left on device". -*/ -static void xprintf (const char *format, ...) -{ -va_list ap; -int ret; - -va_start (ap, format); - ret =vprintf (format, ap); -if (ret <0 ) { -perror ("fixdep" ); -exit (1 ); - } -va_end (ap); -} -struct item {struct item *next;unsigned int len;@@ -189,7 +170,7 @@ static void use_config(const char *m, int slen)define_config (m, slen, hash);/* Print out a dependency path from a symbol name. */ -xprintf (" $(wildcard include/config/%.*s) \\\n" , slen, m); +printf (" $(wildcard include/config/%.*s) \\\n" , slen, m); }/* test if s ends in sub */ @@ -318,13 +299,13 @@ static void parse_dep_file(char *m, const char *target)*/ if (!saw_any_target) { saw_any_target =1 ; -xprintf ("source_%s := %s\n\n" , - target, m); -xprintf ("deps_%s := \\\n" , target); +printf ("source_%s := %s\n\n" , + target, m); +printf ("deps_%s := \\\n" , target); } is_first_dep =0 ; }else { -xprintf (" %s \\\n" , m); +printf (" %s \\\n" , m); } buf =read_file (m);@@ -347,8 +328,8 @@ static void parse_dep_file(char *m, const char *target)exit (1 ); } -xprintf ("\n%s: $(deps_%s)\n\n" , target, target); -xprintf ("$(deps_%s):\n" , target); +printf ("\n%s: $(deps_%s)\n\n" , target, target); +printf ("$(deps_%s):\n" , target); }int main (int argc,char *argv[])@@ -363,11 +344,20 @@ int main(int argc, char *argv[]) target = argv[2 ]; cmdline = argv[3 ]; -xprintf ("cmd_%s := %s\n\n" , target, cmdline); +printf ("cmd_%s := %s\n\n" , target, cmdline); buf =read_file (depfile);parse_dep_file (buf, target);free (buf); +fflush (stdout); + +/* +* In the intended usage, the stdout is redirected to .*.cmd files. +* Call ferror() to catch errors such as "No space left on device". +*/ +if (ferror (stdout)) +exit (1 ); +return 0 ; } --
Quoted 1 line
2.32.0
-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)
Quoted 11 lines · David Laight
From: Masahiro Yamada
Quoted 9 lines
Sent: 21 February 2022 16:43
To: [email protected]Checking the return value of (v)printf does not ensure the successful write to the .cmd file.
Call
fflush()andferror()to make sure that everything has been written to the file.
Quoted 7 lines
Quoted 1 line
Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by David Laight <[email protected]>I'll note that you've lost the
perror("fixdep"). But I suspect that isn't very meaningful. If the disk is full it'd probably get lost anyway.
perror() will go to stderr, i.e. tty here.
So, that is not the issue.
ferror() itself does not set errno here; "man ferror" says, "These functions should not fail and do not set the external variable errno"
So, I dropped perror() because I am not sure if any related error message is printed here.
Perhaps, errno was set by some of preceding printf() calls, but I am not quite sure if it is carried all the way to the end of this program.
Quoted 94 lines
Quoted 94 lines
---
scripts/basic/fixdep.c | 44 ++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 27 deletions(-)scripts/basic/fixdep.c +17
-27@@ -105,25 +105,6 @@ static void usage(void)exit (1 ); } -/* -* In the intended usage of this program, the stdout is redirected to .*.cmd -* files. The return value of printf() must be checked to catch any error, -* e.g. "No space left on device". -*/ -static void xprintf (const char *format, ...) -{ -va_list ap; -int ret; - -va_start (ap, format); - ret =vprintf (format, ap); -if (ret <0 ) { -perror ("fixdep" ); -exit (1 ); - } -va_end (ap); -} -struct item {struct item *next;unsigned int len;@@ -189,7 +170,7 @@ static void use_config(const char *m, int slen)define_config (m, slen, hash);/* Print out a dependency path from a symbol name. */ -xprintf (" $(wildcard include/config/%.*s) \\\n" , slen, m); +printf (" $(wildcard include/config/%.*s) \\\n" , slen, m); }/* test if s ends in sub */ @@ -318,13 +299,13 @@ static void parse_dep_file(char *m, const char *target)*/ if (!saw_any_target) { saw_any_target =1 ; -xprintf ("source_%s := %s\n\n" , - target, m); -xprintf ("deps_%s := \\\n" , target); +printf ("source_%s := %s\n\n" , + target, m); +printf ("deps_%s := \\\n" , target); } is_first_dep =0 ; }else { -xprintf (" %s \\\n" , m); +printf (" %s \\\n" , m); } buf =read_file (m);@@ -347,8 +328,8 @@ static void parse_dep_file(char *m, const char *target)exit (1 ); } -xprintf ("\n%s: $(deps_%s)\n\n" , target, target); -xprintf ("$(deps_%s):\n" , target); +printf ("\n%s: $(deps_%s)\n\n" , target, target); +printf ("$(deps_%s):\n" , target); }int main (int argc,char *argv[])@@ -363,11 +344,20 @@ int main(int argc, char *argv[]) target = argv[2 ]; cmdline = argv[3 ]; -xprintf ("cmd_%s := %s\n\n" , target, cmdline); +printf ("cmd_%s := %s\n\n" , target, cmdline); buf =read_file (depfile);parse_dep_file (buf, target);free (buf); +fflush (stdout); + +/* +* In the intended usage, the stdout is redirected to .*.cmd files. +* Call ferror() to catch errors such as "No space left on device". +*/ +if (ferror (stdout)) +exit (1 ); +
Quoted 9 lines
Quoted 4 lines
scripts/basic/fixdep.c +0
-1return 0 ; } --2.32.0
-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)
--
Best Regards
Masahiro Yamada
From: Masahiro Yamada <[email protected]>
Quoted 30 lines
Sent: 22 February 2022 03:44
Quoted 11 lines · David Laight
From: Masahiro Yamada
Quoted 9 lines
Sent: 21 February 2022 16:43
To: [email protected]Checking the return value of (v)printf does not ensure the successful write to the .cmd file.
Call
fflush()andferror()to make sure that everything has been written to the file.Quoted 7 lines
Quoted 1 line
Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by David Laight <[email protected]>I'll note that you've lost the
perror("fixdep"). But I suspect that isn't very meaningful. If the disk is full it'd probably get lost anyway.
perror()will go to stderr, i.e. tty here.
So, that is not the issue.
ferror()itself does not set errno here; "man ferror" says, "These functions should not fail and do not set the external variable errno"
Quoted 6 lines
So, I dropped
perror()because I am not sure if any related error message is printed here.Perhaps, errno was set by some of preceding
printf()calls, but I am not quite sure if it is carried all the way to the end of this program.
I was thinking or a slightly more descriptive error message :-)
David
-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)