Skip to contentSkip to conversation

HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()

PATCH Superseded Qasim Ijaz 2 participants 2 messages Jul 23, 2025 – Jul 24, 2025

Subsystems (2)
lore
Share & tools
lore

Qasim Ijaz

author
#0 lore raw

PATCH v2 1/1 HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()

A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it.

Below is the KASAN splat after the out of bounds access happens:

[   13.671954] ==================================================================
[   13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[   13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[   13.673297]
[   13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[   13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[   13.673297] Call Trace:
[   13.673297]  <TASK>
[   13.673297]  dump_stack_lvl+0x5f/0x80
[   13.673297]  print_report+0xd1/0x660
[   13.673297]  kasan_report+0xe5/0x120
[   13.673297]  __asan_report_load1_noabort+0x18/0x20
[   13.673297]  mt_report_fixup+0x103/0x110
[   13.673297]  hid_open_report+0x1ef/0x810
[   13.673297]  mt_probe+0x422/0x960
[   13.673297]  hid_device_probe+0x2e2/0x6f0
[   13.673297]  really_probe+0x1c6/0x6b0
[   13.673297]  __driver_probe_device+0x24f/0x310
[   13.673297]  driver_probe_device+0x4e/0x220
[   13.673297]  __device_attach_driver+0x169/0x320
[   13.673297]  bus_for_each_drv+0x11d/0x1b0
[   13.673297]  __device_attach+0x1b8/0x3e0
[   13.673297]  device_initial_probe+0x12/0x20
[   13.673297]  bus_probe_device+0x13d/0x180
[   13.673297]  device_add+0xe3a/0x1670
[   13.673297]  hid_add_device+0x31d/0xa40

[...]

Fixes c8000deb6836 ("HID: multitouch: Add support for GT7868Q")

---
v2:
- Simplify fix with a if-size check after discussion with Jiri Slaby
- Change explanation of bug to reflect inclusion of a if-size check

 drivers/hid/hid-multitouch.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/hid/hid-multitouch.c +8 -0
index 294516a8f541..22c6314a8843 100644
@@ -1503,6 +1503,14 @@ static const __u8 *mt_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 	if (hdev->vendor == I2C_VENDOR_ID_GOODIX &&
 	    (hdev->product == I2C_DEVICE_ID_GOODIX_01E8 ||
 	     hdev->product == I2C_DEVICE_ID_GOODIX_01E9)) {
+		if (*size < 608) {
+			dev_info(
+				&hdev->dev,
+				"GT7868Q fixup: report descriptor is only %u bytes, skipping\n",
+				*size);
+			return rdesc;
+		}
+
 		if (rdesc[607] == 0x15) {
 			rdesc[607] = 0x25;
 			dev_info(
Signature · 1 line
2.39.5
Reviewed-by on v2 1/1
#1 lore raw
Quoted 13 lines · Qasim Ijaz

A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it.

Below is the KASAN splat after the out of bounds access happens:

[   13.671954] ==================================================================
[   13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110

...

Quoted 5 lines

[...]

Fixes c8000deb6836 ("HID: multitouch: Add support for GT7868Q")

LGTM

drivers/hid/hid-multitouch.c static const __u8 *mt_report_fixup(struct hid_device *hdev, __u8 *rdesc, · line 1507

Quoted 8 lines
drivers/hid/hid-multitouch.c +2 -0
@@ -1503,6 +1503,14 @@ static const __u8 *mt_report_fixup(struct hid_device *hdev, __u8 *rdesc,
  	if (hdev->vendor == I2C_VENDOR_ID_GOODIX &&
  	    (hdev->product == I2C_DEVICE_ID_GOODIX_01E8 ||
  	     hdev->product == I2C_DEVICE_ID_GOODIX_01E9)) {
+		if (*size < 608) {
+			dev_info(

Except I would not add \n to the line above.

drivers/hid/hid-multitouch.c static const __u8 *mt_report_fixup(struct hid_device *hdev, __u8 *rdesc, · line 1516

Quoted 9 lines
drivers/hid/hid-multitouch.c +6 -0
+				&hdev->dev,
+				"GT7868Q fixup: report descriptor is only %u bytes, skipping\n",
+				*size);
+			return rdesc;
+		}
+
  		if (rdesc[607] == 0x15) {
  			rdesc[607] = 0x25;
  			dev_info(

thanks,

Signature · 2 lines
js
suse labs