mac80211: Fix sw connection monitor and sw scan when STA is connected HE
PATCH 1/1 mac80211: Fix sw connection monitor and sw scan when STA is connected HE
Add HE_NULLFUNC_STACK hw_flag to allow sending nullfunc when STA is connected HE. Then, sw connection monitor can detects AP has left, and sw scan can issue nullfunc properly when switching to off channel.
The related commits are commit 41cbb0f5a295 ("mac80211: add support for HE") that stops sending nullfunc when STA is connected HE, and commit f39b07fdfb68 ("mac80211: HE STA disassoc due to QOS NULL not sent") that makes STA doesn't disconnect locally even if AP has left.
--- include/net/mac80211.h | 4 ++++ net/mac80211/debugfs.c | 1 + net/mac80211/mlme.c | 9 ++++++--- net/mac80211/sta_info.c | 3 ++- 4 files changed, 13 insertions(+), 4 deletions(-)
include/net/mac80211.h +4 -0
@@ -2402,6 +2402,9 @@ struct ieee80211_txq {* usage and 802.11 frames with %RX_FLAG_ONLY_MONITOR set for monitor to * the stack. * +* @IEEE80211_HW_HE_NULLFUNC_STACK: HE hardware needs stack to send nullfunc +* frames. +* * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags {
@@ -2457,6 +2460,7 @@ enum ieee80211_hw_flags {IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD ,IEEE80211_HW_SUPPORTS_RX_DECAP_OFFLOAD ,IEEE80211_HW_SUPPORTS_CONC_MON_RX_DECAP , +IEEE80211_HW_HE_NULLFUNC_STACK ,/* keep last, obviously */ NUM_IEEE80211_HW_FLAGS
net/mac80211/debugfs.c +1 -0
@@ -457,6 +457,7 @@ static const char *hw_flag_names[] = {FLAG (SUPPORTS_TX_ENCAP_OFFLOAD ),FLAG (SUPPORTS_RX_DECAP_OFFLOAD ),FLAG (SUPPORTS_CONC_MON_RX_DECAP ), +FLAG (HE_NULLFUNC_STACK ), #undef FLAG };
net/mac80211/mlme.c +6 -3
@@ -1095,7 +1095,8 @@ void ieee80211_send_nullfunc(struct ieee80211_local *local,struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;/* Don't send NDPs when STA is connected HE */ -if (sdata->vif.type ==NL80211_IFTYPE_STATION && +if (!ieee80211_hw_check (&local->hw,HE_NULLFUNC_STACK ) && + sdata->vif.type ==NL80211_IFTYPE_STATION && !(ifmgd->flags &IEEE80211_STA_DISABLE_HE ))return ;
@@ -1131,7 +1132,8 @@ static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,return ;/* Don't send NDPs when connected HE */ -if (!(sdata->u.mgd.flags &IEEE80211_STA_DISABLE_HE )) +if (!ieee80211_hw_check (&local->hw,HE_NULLFUNC_STACK ) && + !(sdata->u.mgd.flags &IEEE80211_STA_DISABLE_HE ))return ; skb =dev_alloc_skb (local->hw.extra_tx_headroom +30 );
@@ -2617,7 +2619,8 @@ static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)if (ieee80211_hw_check (&sdata->local->hw,REPORTS_TX_ACK_STATUS )) { ifmgd->nullfunc_failed = false; -if (!(ifmgd->flags &IEEE80211_STA_DISABLE_HE )) +if (!ieee80211_hw_check (&sdata->local->hw,HE_NULLFUNC_STACK ) && + !(ifmgd->flags &IEEE80211_STA_DISABLE_HE )) ifmgd->probe_send_count--;else ieee80211_send_nullfunc (sdata->local, sdata, false);
net/mac80211/sta_info.c +2 -1
@@ -1399,7 +1399,8 @@ static void ieee80211_send_null_response(struct sta_info *sta, int tid,struct ieee80211_chanctx_conf *chanctx_conf;/* Don't send NDPs when STA is connected HE */ -if (sdata->vif.type ==NL80211_IFTYPE_STATION && +if (!ieee80211_hw_check (&local->hw,HE_NULLFUNC_STACK ) && + sdata->vif.type ==NL80211_IFTYPE_STATION && !(sdata->u.mgd.flags &IEEE80211_STA_DISABLE_HE ))return ;
Signature · 1 line
2.25.1
Quoted 12 lines
-----Original Message-----
From: Ping-Ke Shih [mailto:[email protected]]
Sent: Friday, June 11, 2021 11:04 AM
To: [email protected]
Cc: [email protected]
Subject: [PATCH] mac80211: Fix sw connection monitor and sw scan when STA is connected HEAdd
HE_NULLFUNC_STACKhw_flagto allow sending nullfunc when STA is connected HE. Then, sw connection monitor can detects AP has left, and sw scan can issue nullfunc properly when switching to off channel.
Quoted 7 lines
The related commits are commit
41cbb0f5a295("mac80211: add support for HE") that stops sending nullfunc when STA is connected HE, and commitf39b07fdfb68("mac80211: HE STA disassoc due to QOS NULL not sent") that makes STA doesn't disconnect locally even if AP has left.Signed-off-by Ping-Ke Shih <[email protected]>---
[...]
Hi mac80211 team,
We are working on Realtek 11ax driver, rtw89, not being merged yet.
This driver uses software connection monitor and software scan, like our 11ac driver rtw88, but we found these two functions don't work properly due to mac80211 doesn't send null data frame when STA is connected HE.
We search for the reason why it can't send null frame, but we don't get the answer. Possibly, it is because existing HE hardware supports hardware connection monitor and scan, or supports TWT to avoid sending null data frame to tell AP its PS mode. Could anyone enlighten me the reason?
Thank you
--
Ping-Ke
Johannes Berg
maintainerQuoted 9 lines
Hi mac80211 team,
We are working on Realtek 11ax driver, rtw89, not being merged yet. This driver uses software connection monitor and software scan, like our 11ac driver rtw88,
but we found these two functions don't work properly due to mac80211 doesn't send
null data frame when STA is connected HE.
Quoted 7 lines
We search for the reason why it can't send null frame, but we don't get the answer.
Possibly, it is because existing HE hardware supports hardware connection monitor
and scan, or supports TWT to avoid sending null data frame to tell AP its PS mode.
Could anyone enlighten me the reason?
It was just a workaround for an iwlwifi specific issue that got left in. I just merged a patch from Felix to resolve that.
johannes
Quoted 25 lines
-----Original Message-----
From: Johannes Berg [mailto:[email protected]]
Sent: Wednesday, June 23, 2021 6:33 PM
To: Pkshih
Cc: [email protected]
Subject: Re: [PATCH] mac80211: Fix sw connection monitor and sw scan when STA is connected HEQuoted 9 lines
Hi mac80211 team,
We are working on Realtek 11ax driver, rtw89, not being merged yet. This driver uses software connection monitor and software scan, like our 11ac driver rtw88,
but we found these two functions don't work properly due to mac80211 doesn't send
null data frame when STA is connected HE.Quoted 7 lines
We search for the reason why it can't send null frame, but we don't get the answer.
Possibly, it is because existing HE hardware supports hardware connection monitor
and scan, or supports TWT to avoid sending null data frame to tell AP its PS mode.
Could anyone enlighten me the reason?
Quoted 3 lines
It was just a workaround for an iwlwifi specific issue that got left in. I just merged a patch from Felix to resolve that.
I check Felix's patch:
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
I think we should revert the commit f39b07fdfb68 ("mac80211: HE STA disassoc due to QOS NULL not sent"), which fixes connection monitor due to QOS NULL not send.
Another place is ieee80211_send_null_response(); I'm not sure if we can remove the checking as well.
net/mac80211/sta_info.c +0 -5
@@ -1398,11 +1398,6 @@ static void ieee80211_send_null_response(struct sta_info *sta, int tid,struct ieee80211_tx_info *info;struct ieee80211_chanctx_conf *chanctx_conf; -/* Don't send NDPs when STA is connected HE */ -if (sdata->vif.type ==NL80211_IFTYPE_STATION && - !(sdata->u.mgd.flags &IEEE80211_STA_DISABLE_HE )) -return ; -if (qos) { fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC |
--
Ping-Ke
Johannes Berg
maintainerQuoted 35 lines · Pkshih
Quoted 30 lines
-----Original Message-----
From: Johannes Berg [mailto:[email protected]]
Sent: Wednesday, June 23, 2021 6:33 PM
To: Pkshih
Cc: [email protected]
Subject: Re: [PATCH] mac80211: Fix sw connection monitor and sw scan when STA is connected HEQuoted 12 lines
Hi mac80211 team,
We are working on Realtek 11ax driver, rtw89, not being merged yet.
This driver uses software connection monitor and software scan, like
our 11ac driver rtw88,
but we found these two functions don't work properly due to mac80211
doesn't send
null data frame when STA is connected HE.Quoted 9 lines
We search for the reason why it can't send null frame, but we don't
get the answer.
Possibly, it is because existing HE hardware supports hardware connection monitor
and scan, or supports TWT to avoid sending null data frame to tell AP
its PS mode.
Could anyone enlighten me the reason?Quoted 4 lines
It was just a workaround for an iwlwifi specific issue that got left in.
I just merged a patch from Felix to resolve that.
Quoted 8 lines
I check Felix's patch:
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/I think we should revert the commit
f39b07fdfb68("mac80211: HE STA disassoc due to QOS NULL not sent"),
which fixes connection monitor due to QOS NULL not send.
I agree, that makes sense.
Quoted 4 lines
Another place is
ieee80211_send_null_response(); I'm not sure if we can remove
the checking as well.
Yes, I think so.
Want to send patch(es) for that?
johannes
Quoted 56 lines
-----Original Message-----
From: Johannes Berg [mailto:[email protected]]
Sent: Wednesday, June 23, 2021 9:00 PM
To: Pkshih
Cc: [email protected]
Subject: Re: [PATCH] mac80211: Fix sw connection monitor and sw scan when STA is connected HEQuoted 35 lines · Pkshih
Quoted 30 lines
-----Original Message-----
From: Johannes Berg [mailto:[email protected]]
Sent: Wednesday, June 23, 2021 6:33 PM
To: Pkshih
Cc: [email protected]
Subject: Re: [PATCH] mac80211: Fix sw connection monitor and sw scan when STA is connected HEQuoted 12 lines
Hi mac80211 team,
We are working on Realtek 11ax driver, rtw89, not being merged yet.
This driver uses software connection monitor and software scan, like
our 11ac driver rtw88,
but we found these two functions don't work properly due to mac80211
doesn't send
null data frame when STA is connected HE.Quoted 9 lines
We search for the reason why it can't send null frame, but we don't
get the answer.
Possibly, it is because existing HE hardware supports hardware connection monitor
and scan, or supports TWT to avoid sending null data frame to tell AP
its PS mode.
Could anyone enlighten me the reason?Quoted 4 lines
It was just a workaround for an iwlwifi specific issue that got left in.
I just merged a patch from Felix to resolve that.Quoted 8 lines
I check Felix's patch:
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/I think we should revert the commit
f39b07fdfb68("mac80211: HE STA disassoc due to QOS NULL not sent"),
which fixes connection monitor due to QOS NULL not send.I agree, that makes sense.
Quoted 1 line
Quoted 8 lines
Quoted 3 lines
Another place is
ieee80211_send_null_response(); I'm not sure if we can remove
the checking as well.Yes, I think so.
Want to send patch(es) for that?
Sure.
Two patches are sent:
https://lore.kernel.org/linux-wireless/[email protected]/T/#t
https://lore.kernel.org/linux-wireless/[email protected]/T/#u
--
Ping-Ke