move alloc_tag.c file under mm/
Subsystems (4)
Suren Baghdasaryan
maintainercover move alloc_tag.c file under mm/
Memory allocation profiling is ultimately an mm feature and now that we need to use some internal mm definitions in it [1], the time is right to move its implementation under mm/. The move is straight-forward, involving just alloc_tag.c file. Update config, makefiles and maintainers as well.
[1] https://lore.kernel.org/all/[email protected]/
Lorenzo Stoakes (1):
mm: move alloc tag to mm
Suren Baghdasaryan (1):
MAINTAINERS: move inactive maintainer to CREDITS
CREDITS | 4 ++++
MAINTAINERS | 21 ++++++++++-----------
lib/Kconfig.debug | 28 ----------------------------
lib/Makefile | 1 -
mm/Kconfig.debug | 28 ++++++++++++++++++++++++++++
mm/Makefile | 1 +
{lib => mm}/alloc_tag.c | 0
7 files changed, 43 insertions(+), 40 deletions(-)
rename {lib => mm}/alloc_tag.c (100%)base-commit: 81652c5a65d4ae28e9b18c16ef917a40025c3653
Signature · 1 line
2.55.0.rc0.799.gd6f94ed593-goog
Suren Baghdasaryan
maintainerPATCH 1/2 MAINTAINERS: move inactive maintainer to CREDITS
Move Kent Overstreet from maintainers for Memory Allocation Profiling to CREDITS in recognition of his co-authorship and contributions to this feature.
--- CREDITS | 4 ++++ MAINTAINERS | 1 - 2 files changed, 4 insertions(+), 1 deletion(-)
CREDITS +4 -0
@@ -3091,6 +3091,10 @@ N: Jens Osterkamp E: [email protected] D: Maintainer of Spidernet network driver for Cell +N: Kent Overstreet +E: [email protected] +D: Co-authored and contributed to Memory Allocation Profiling + N: Gadi Oxman E: [email protected] D: Original author and maintainer of IDE/ATAPI floppy/tape drivers
MAINTAINERS +0 -1
@@ -16706,7 +16706,6 @@ F: tools/testing/memblock/ MEMORY ALLOCATION PROFILING M: Suren Baghdasaryan <[email protected]> -M: Kent Overstreet <[email protected]> R: Hao Ge <[email protected]> L: [email protected] S: Maintained
Signature · 1 line
2.55.0.rc0.799.gd6f94ed593-goog
Re: [PATCH 1/2] MAINTAINERS: move inactive maintainer to CREDITS
Quoted 6 lines · Suren Baghdasaryan
Move Kent Overstreet from maintainers for Memory Allocation Profiling to CREDITS in recognition of his co-authorship and contributions to this feature.
Cc Kent Overstreet <[email protected]>Signed-off-by Suren Baghdasaryan <[email protected]>
Quoted 33 lines
--- CREDITS | 4 ++++ MAINTAINERS | 1 - 2 files changed, 4 insertions(+), 1 deletion(-)CREDITS +4
-0@@ -3091,6 +3091,10 @@ N: Jens Osterkamp E: [email protected] D: Maintainer of Spidernet network driver for Cell +N: Kent Overstreet +E: [email protected] +D: Co-authored and contributed to Memory Allocation Profiling + N: Gadi Oxman E: [email protected] D: Original author and maintainer of IDE/ATAPI floppy/tape driversMAINTAINERS +0
-2@@ -16706,7 +16706,6 @@ F: tools/testing/memblock/ MEMORY ALLOCATION PROFILING M: Suren Baghdasaryan <[email protected]> -M: Kent Overstreet <[email protected]> R: Hao Ge <[email protected]> L: [email protected] S: Maintained --
Quoted 2 lines
2.55.0.rc0.799.gd6f94ed593-goog
Cheers, Lorenzo
Suren Baghdasaryan
maintainerPATCH 2/2 mm: move alloc tag to mm
In reply to Suren BaghdasaryanFrom: Lorenzo Stoakes <[email protected]>
The alloc tagging work is really mm-specific, so move alloc_tag.c to mm/ and additionally update the MAINTAINERS entry to place it within memory management and port over the Kconfig and Makefile code to mm.
---
MAINTAINERS | 20 ++++++++++----------
lib/Kconfig.debug | 28 ----------------------------
lib/Makefile | 1 -
mm/Kconfig.debug | 28 ++++++++++++++++++++++++++++
mm/Makefile | 1 +
{lib => mm}/alloc_tag.c | 0
6 files changed, 39 insertions(+), 39 deletions(-)
rename {lib => mm}/alloc_tag.c (100%)MAINTAINERS +10 -10
@@ -16704,16 +16704,6 @@ F: mm/mm_init.c F: mm/rodata_test.c F: tools/testing/memblock/ -MEMORY ALLOCATION PROFILING -M: Suren Baghdasaryan <[email protected]> -R: Hao Ge <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/mm/allocation-profiling.rst -F: include/linux/alloc_tag.h -F: include/linux/pgalloc_tag.h -F: lib/alloc_tag.c - MEMORY CONTROLLER DRIVERS M: Krzysztof Kozlowski <[email protected]> L: [email protected]
@@ -16758,6 +16748,16 @@ T: quilt git://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new F: mm/ F: tools/mm/ +MEMORY MANAGEMENT - ALLOCATION PROFILING (ALLOC TAG) +M: Suren Baghdasaryan <[email protected]> +R: Hao Ge <[email protected]> +L: [email protected] +S: Maintained +F: Documentation/mm/allocation-profiling.rst +F: include/linux/alloc_tag.h +F: include/linux/pgalloc_tag.h +F: mm/alloc_tag.c + MEMORY MANAGEMENT - BALLOON M: Andrew Morton <[email protected]> M: David Hildenbrand <[email protected]>
lib/Kconfig.debug +0 -28
@@ -1048,34 +1048,6 @@ config CODE_TAGGING bool select KALLSYMS -config MEM_ALLOC_PROFILING - bool "Enable memory allocation profiling" - default n - depends on MMU - depends on PROC_FS - depends on !DEBUG_FORCE_WEAK_PER_CPU - select CODE_TAGGING - select PAGE_EXTENSION - select SLAB_OBJ_EXT - help - Track allocation source code and record total allocation size - initiated at that code location. The mechanism can be used to track - memory leaks with a low performance and memory impact. - -config MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - bool "Enable memory allocation profiling by default" - default y - depends on MEM_ALLOC_PROFILING - -config MEM_ALLOC_PROFILING_DEBUG - bool "Memory allocation profiler debugging" - default n - depends on MEM_ALLOC_PROFILING - select MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - help - Adds warnings with helpful error messages for memory allocation - profiling. - source "lib/Kconfig.kasan" source "lib/Kconfig.kfence" source "lib/Kconfig.kmsan"
lib/Makefile +0 -1
@@ -197,7 +197,6 @@ obj-$(CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT) += \ obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o obj-$(CONFIG_CODE_TAGGING) += codetag.o -obj-$(CONFIG_MEM_ALLOC_PROFILING) += alloc_tag.o lib-$(CONFIG_GENERIC_BUG) += bug.o
mm/Kconfig.debug +28 -0
@@ -320,3 +320,31 @@ config PER_VMA_LOCK_STATS overhead in the page fault path. If in doubt, say N. + +config MEM_ALLOC_PROFILING + bool "Enable memory allocation profiling" + default n + depends on MMU + depends on PROC_FS + depends on !DEBUG_FORCE_WEAK_PER_CPU + select CODE_TAGGING + select PAGE_EXTENSION + select SLAB_OBJ_EXT + help + Track allocation source code and record total allocation size + initiated at that code location. The mechanism can be used to track + memory leaks with a low performance and memory impact. + +config MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT + bool "Enable memory allocation profiling by default" + default y + depends on MEM_ALLOC_PROFILING + +config MEM_ALLOC_PROFILING_DEBUG + bool "Memory allocation profiler debugging" + default n + depends on MEM_ALLOC_PROFILING + select MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT + help + Adds warnings with helpful error messages for memory allocation + profiling.
mm/Makefile +1 -0
@@ -147,3 +147,4 @@ obj-$(CONFIG_SHRINKER_DEBUG) += shrinker_debug.o obj-$(CONFIG_EXECMEM) += execmem.o obj-$(CONFIG_TMPFS_QUOTA) += shmem_quota.o obj-$(CONFIG_LAZY_MMU_MODE_KUNIT_TEST) += tests/lazy_mmu_mode_kunit.o +obj-$(CONFIG_MEM_ALLOC_PROFILING) += alloc_tag.o
mm/alloc_tag.c renamed from lib/alloc_tag.c +0 -0
Signature · 1 line
2.55.0.rc0.799.gd6f94ed593-goog
Re: [PATCH 2/2] mm: move alloc tag to mm
Quoted 5 lines · On Thu, 25 Jun 2026 11:48:57 -0700 Suren Baghdasaryan <[email protected]> wrote:
From: Lorenzo Stoakes <[email protected]>
The alloc tagging work is really mm-specific, so move
alloc_tag.ctomm/and additionally update theMAINTAINERSentry to place it within memory management and port over theKconfigandMakefilecode to mm.
Makes sense to me.
Quoted 3 lines
Signed-off-by Lorenzo Stoakes <[email protected]>Signed-off-by Suren Baghdasaryan <[email protected]>
Thanks,
SJ
[...]
Re: [PATCH 2/2] mm: move alloc tag to mm
In reply to Suren BaghdasaryanQuoted 8 lines · Suren Baghdasaryan
From: Lorenzo Stoakes <[email protected]>
The alloc tagging work is really mm-specific, so move
alloc_tag.ctomm/and additionally update theMAINTAINERSentry to place it within memory management and port over theKconfigandMakefilecode to mm.Signed-off-by Lorenzo Stoakes <[email protected]>Signed-off-by Suren Baghdasaryan <[email protected]>
I've applied this to my local tree and everything looks good.
LGTM.
Thanks
Best Regards
Hao
Quoted 148 lines
--- MAINTAINERS | 20 ++++++++++---------- lib/Kconfig.debug | 28 ---------------------------- lib/Makefile | 1 - mm/Kconfig.debug | 28 ++++++++++++++++++++++++++++ mm/Makefile | 1 + {lib => mm}/alloc_tag.c | 0 6 files changed, 39 insertions(+), 39 deletions(-)rename {lib =>
mm}/alloc_tag.c(100%)MAINTAINERS +10
-10@@ -16704,16 +16704,6 @@ F: mm/mm_init.c F: mm/rodata_test.c F: tools/testing/memblock/ -MEMORY ALLOCATION PROFILING -M: Suren Baghdasaryan <[email protected]> -R: Hao Ge <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/mm/allocation-profiling.rst -F: include/linux/alloc_tag.h -F: include/linux/pgalloc_tag.h -F: lib/alloc_tag.c - MEMORY CONTROLLER DRIVERS M: Krzysztof Kozlowski <[email protected]> L: [email protected]@@ -16758,6 +16748,16 @@ T: quilt git://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new F: mm/ F: tools/mm/ +MEMORY MANAGEMENT - ALLOCATION PROFILING (ALLOC TAG) +M: Suren Baghdasaryan <[email protected]> +R: Hao Ge <[email protected]> +L: [email protected] +S: Maintained +F: Documentation/mm/allocation-profiling.rst +F: include/linux/alloc_tag.h +F: include/linux/pgalloc_tag.h +F: mm/alloc_tag.c + MEMORY MANAGEMENT - BALLOON M: Andrew Morton <[email protected]> M: David Hildenbrand <[email protected]>lib/Kconfig.debug +0
-28@@ -1048,34 +1048,6 @@ config CODE_TAGGING bool select KALLSYMS -config MEM_ALLOC_PROFILING - bool "Enable memory allocation profiling" - default n - depends on MMU - depends on PROC_FS - depends on !DEBUG_FORCE_WEAK_PER_CPU - select CODE_TAGGING - select PAGE_EXTENSION - select SLAB_OBJ_EXT - help - Track allocation source code and record total allocation size - initiated at that code location. The mechanism can be used to track - memory leaks with a low performance and memory impact. - -config MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - bool "Enable memory allocation profiling by default" - default y - depends on MEM_ALLOC_PROFILING - -config MEM_ALLOC_PROFILING_DEBUG - bool "Memory allocation profiler debugging" - default n - depends on MEM_ALLOC_PROFILING - select MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - help - Adds warnings with helpful error messages for memory allocation - profiling. - source "lib/Kconfig.kasan" source "lib/Kconfig.kfence" source "lib/Kconfig.kmsan"lib/Makefile +0
-1@@ -197,7 +197,6 @@ obj-$(CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT) += \ obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o obj-$(CONFIG_CODE_TAGGING) += codetag.o -obj-$(CONFIG_MEM_ALLOC_PROFILING) += alloc_tag.o lib-$(CONFIG_GENERIC_BUG) += bug.omm/Kconfig.debug +28
-0@@ -320,3 +320,31 @@ config PER_VMA_LOCK_STATS overhead in the page fault path. If in doubt, say N. + +config MEM_ALLOC_PROFILING + bool "Enable memory allocation profiling" + default n + depends on MMU + depends on PROC_FS + depends on !DEBUG_FORCE_WEAK_PER_CPU + select CODE_TAGGING + select PAGE_EXTENSION + select SLAB_OBJ_EXT + help + Track allocation source code and record total allocation size + initiated at that code location. The mechanism can be used to track + memory leaks with a low performance and memory impact. + +config MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT + bool "Enable memory allocation profiling by default" + default y + depends on MEM_ALLOC_PROFILING + +config MEM_ALLOC_PROFILING_DEBUG + bool "Memory allocation profiler debugging" + default n + depends on MEM_ALLOC_PROFILING + select MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT + help + Adds warnings with helpful error messages for memory allocation + profiling.mm/Makefile +1
-0@@ -147,3 +147,4 @@ obj-$(CONFIG_SHRINKER_DEBUG) += shrinker_debug.o obj-$(CONFIG_EXECMEM) += execmem.o obj-$(CONFIG_TMPFS_QUOTA) += shmem_quota.o obj-$(CONFIG_LAZY_MMU_MODE_KUNIT_TEST) += tests/lazy_mmu_mode_kunit.o +obj-$(CONFIG_MEM_ALLOC_PROFILING) += alloc_tag.omm/alloc_tag.c renamed from lib/alloc_tag.c +0
-0
Re: [PATCH 2/2] mm: move alloc tag to mm
In reply to Suren BaghdasaryanQuoted 8 lines · Suren Baghdasaryan
From: Lorenzo Stoakes <[email protected]>
The alloc tagging work is really mm-specific, so move
alloc_tag.ctomm/and additionally update theMAINTAINERSentry to place it within memory management and port over theKconfigandMakefilecode to mm.Signed-off-by Lorenzo Stoakes <[email protected]>Signed-off-by Suren Baghdasaryan <[email protected]>
Quoted 148 lines
--- MAINTAINERS | 20 ++++++++++---------- lib/Kconfig.debug | 28 ---------------------------- lib/Makefile | 1 - mm/Kconfig.debug | 28 ++++++++++++++++++++++++++++ mm/Makefile | 1 + {lib => mm}/alloc_tag.c | 0 6 files changed, 39 insertions(+), 39 deletions(-) rename {lib => mm}/alloc_tag.c (100%)MAINTAINERS +10
-10@@ -16704,16 +16704,6 @@ F: mm/mm_init.c F: mm/rodata_test.c F: tools/testing/memblock/ -MEMORY ALLOCATION PROFILING -M: Suren Baghdasaryan <[email protected]> -R: Hao Ge <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/mm/allocation-profiling.rst -F: include/linux/alloc_tag.h -F: include/linux/pgalloc_tag.h -F: lib/alloc_tag.c - MEMORY CONTROLLER DRIVERS M: Krzysztof Kozlowski <[email protected]> L: [email protected]@@ -16758,6 +16748,16 @@ T: quilt git://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new F: mm/ F: tools/mm/ +MEMORY MANAGEMENT - ALLOCATION PROFILING (ALLOC TAG) +M: Suren Baghdasaryan <[email protected]> +R: Hao Ge <[email protected]> +L: [email protected] +S: Maintained +F: Documentation/mm/allocation-profiling.rst +F: include/linux/alloc_tag.h +F: include/linux/pgalloc_tag.h +F: mm/alloc_tag.c + MEMORY MANAGEMENT - BALLOON M: Andrew Morton <[email protected]> M: David Hildenbrand <[email protected]>lib/Kconfig.debug +0
-28@@ -1048,34 +1048,6 @@ config CODE_TAGGING bool select KALLSYMS -config MEM_ALLOC_PROFILING - bool "Enable memory allocation profiling" - default n - depends on MMU - depends on PROC_FS - depends on !DEBUG_FORCE_WEAK_PER_CPU - select CODE_TAGGING - select PAGE_EXTENSION - select SLAB_OBJ_EXT - help - Track allocation source code and record total allocation size - initiated at that code location. The mechanism can be used to track - memory leaks with a low performance and memory impact. - -config MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - bool "Enable memory allocation profiling by default" - default y - depends on MEM_ALLOC_PROFILING - -config MEM_ALLOC_PROFILING_DEBUG - bool "Memory allocation profiler debugging" - default n - depends on MEM_ALLOC_PROFILING - select MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - help - Adds warnings with helpful error messages for memory allocation - profiling. - source "lib/Kconfig.kasan" source "lib/Kconfig.kfence" source "lib/Kconfig.kmsan"lib/Makefile +0
-1@@ -197,7 +197,6 @@ obj-$(CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT) += \ obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o obj-$(CONFIG_CODE_TAGGING) += codetag.o -obj-$(CONFIG_MEM_ALLOC_PROFILING) += alloc_tag.o lib-$(CONFIG_GENERIC_BUG) += bug.omm/Kconfig.debug +28
-0@@ -320,3 +320,31 @@ config PER_VMA_LOCK_STATS overhead in the page fault path. If in doubt, say N. + +config MEM_ALLOC_PROFILING + bool "Enable memory allocation profiling" + default n + depends on MMU + depends on PROC_FS + depends on !DEBUG_FORCE_WEAK_PER_CPU + select CODE_TAGGING + select PAGE_EXTENSION + select SLAB_OBJ_EXT + help + Track allocation source code and record total allocation size + initiated at that code location. The mechanism can be used to track + memory leaks with a low performance and memory impact. + +config MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT + bool "Enable memory allocation profiling by default" + default y + depends on MEM_ALLOC_PROFILING + +config MEM_ALLOC_PROFILING_DEBUG + bool "Memory allocation profiler debugging" + default n + depends on MEM_ALLOC_PROFILING + select MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT + help + Adds warnings with helpful error messages for memory allocation + profiling.mm/Makefile +1
-0@@ -147,3 +147,4 @@ obj-$(CONFIG_SHRINKER_DEBUG) += shrinker_debug.o obj-$(CONFIG_EXECMEM) += execmem.o obj-$(CONFIG_TMPFS_QUOTA) += shmem_quota.o obj-$(CONFIG_LAZY_MMU_MODE_KUNIT_TEST) += tests/lazy_mmu_mode_kunit.o +obj-$(CONFIG_MEM_ALLOC_PROFILING) += alloc_tag.omm/alloc_tag.c renamed from lib/alloc_tag.c +0
-0
Re: [PATCH 2/2] mm: move alloc tag to mm
In reply to Suren BaghdasaryanQuoted 8 lines · Suren Baghdasaryan
From: Lorenzo Stoakes <[email protected]>
The alloc tagging work is really mm-specific, so move
alloc_tag.ctomm/and additionally update theMAINTAINERSentry to place it within memory management and port over theKconfigandMakefilecode to mm.Signed-off-by Lorenzo Stoakes <[email protected]>Signed-off-by Suren Baghdasaryan <[email protected]>
Quoted 9 lines
---
MAINTAINERS | 20 ++++++++++----------
lib/Kconfig.debug | 28 ----------------------------
lib/Makefile | 1 -
mm/Kconfig.debug | 28 ++++++++++++++++++++++++++++
mm/Makefile | 1 +
{lib => mm}/alloc_tag.c | 0
6 files changed, 39 insertions(+), 39 deletions(-)
rename {lib => mm}/alloc_tag.c (100%)Yes, this belongs into mm :)
Signature · 3 lines
Cheers, David
Re: [PATCH 2/2] mm: move alloc tag to mm
In reply to Suren BaghdasaryanQuoted 8 lines · Suren Baghdasaryan
From: Lorenzo Stoakes <[email protected]>
The alloc tagging work is really mm-specific, so move
alloc_tag.ctomm/and additionally update theMAINTAINERSentry to place it within memory management and port over theKconfigandMakefilecode to mm.Signed-off-by Lorenzo Stoakes <[email protected]>Signed-off-by Suren Baghdasaryan <[email protected]>
Quoted 9 lines
---
MAINTAINERS | 20 ++++++++++----------
lib/Kconfig.debug | 28 ----------------------------
lib/Makefile | 1 -
mm/Kconfig.debug | 28 ++++++++++++++++++++++++++++
mm/Makefile | 1 +
{lib => mm}/alloc_tag.c | 0
6 files changed, 39 insertions(+), 39 deletions(-)
rename {lib => mm}/alloc_tag.c (100%)Signature · 2 lines
Sincerely yours, Mike.
Re: [PATCH 2/2] mm: move alloc tag to mm
In reply to Suren BaghdasaryanQuoted 9 lines · Suren Baghdasaryan
From: Lorenzo Stoakes <[email protected]>
The alloc tagging work is really mm-specific, so move
alloc_tag.ctomm/and additionally update theMAINTAINERSentry to place it within memory management and port over theKconfigandMakefilecode to mm.Signed-off-by Lorenzo Stoakes <[email protected]>Signed-off-by Suren Baghdasaryan <[email protected]>---
Signature · 2 lines
Cheers, Harry / Hyeonggon
Re: [PATCH 2/2] mm: move alloc tag to mm
In reply to Suren BaghdasaryanQuoted 8 lines · Suren Baghdasaryan
From: Lorenzo Stoakes <[email protected]>
The alloc tagging work is really mm-specific, so move
alloc_tag.ctomm/and additionally update theMAINTAINERSentry to place it within memory management and port over theKconfigandMakefilecode to mm.Signed-off-by Lorenzo Stoakes <[email protected]>Signed-off-by Suren Baghdasaryan <[email protected]>
LGTM (obviously :P) so:
Quoted 149 lines
--- MAINTAINERS | 20 ++++++++++---------- lib/Kconfig.debug | 28 ---------------------------- lib/Makefile | 1 - mm/Kconfig.debug | 28 ++++++++++++++++++++++++++++ mm/Makefile | 1 + {lib => mm}/alloc_tag.c | 0 6 files changed, 39 insertions(+), 39 deletions(-) rename {lib => mm}/alloc_tag.c (100%)MAINTAINERS +10
-10@@ -16704,16 +16704,6 @@ F: mm/mm_init.c F: mm/rodata_test.c F: tools/testing/memblock/ -MEMORY ALLOCATION PROFILING -M: Suren Baghdasaryan <[email protected]> -R: Hao Ge <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/mm/allocation-profiling.rst -F: include/linux/alloc_tag.h -F: include/linux/pgalloc_tag.h -F: lib/alloc_tag.c - MEMORY CONTROLLER DRIVERS M: Krzysztof Kozlowski <[email protected]> L: [email protected]@@ -16758,6 +16748,16 @@ T: quilt git://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new F: mm/ F: tools/mm/ +MEMORY MANAGEMENT - ALLOCATION PROFILING (ALLOC TAG) +M: Suren Baghdasaryan <[email protected]> +R: Hao Ge <[email protected]> +L: [email protected] +S: Maintained +F: Documentation/mm/allocation-profiling.rst +F: include/linux/alloc_tag.h +F: include/linux/pgalloc_tag.h +F: mm/alloc_tag.c + MEMORY MANAGEMENT - BALLOON M: Andrew Morton <[email protected]> M: David Hildenbrand <[email protected]>lib/Kconfig.debug +0
-28@@ -1048,34 +1048,6 @@ config CODE_TAGGING bool select KALLSYMS -config MEM_ALLOC_PROFILING - bool "Enable memory allocation profiling" - default n - depends on MMU - depends on PROC_FS - depends on !DEBUG_FORCE_WEAK_PER_CPU - select CODE_TAGGING - select PAGE_EXTENSION - select SLAB_OBJ_EXT - help - Track allocation source code and record total allocation size - initiated at that code location. The mechanism can be used to track - memory leaks with a low performance and memory impact. - -config MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - bool "Enable memory allocation profiling by default" - default y - depends on MEM_ALLOC_PROFILING - -config MEM_ALLOC_PROFILING_DEBUG - bool "Memory allocation profiler debugging" - default n - depends on MEM_ALLOC_PROFILING - select MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - help - Adds warnings with helpful error messages for memory allocation - profiling. - source "lib/Kconfig.kasan" source "lib/Kconfig.kfence" source "lib/Kconfig.kmsan"lib/Makefile +0
-1@@ -197,7 +197,6 @@ obj-$(CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT) += \ obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o obj-$(CONFIG_CODE_TAGGING) += codetag.o -obj-$(CONFIG_MEM_ALLOC_PROFILING) += alloc_tag.o lib-$(CONFIG_GENERIC_BUG) += bug.omm/Kconfig.debug +28
-0@@ -320,3 +320,31 @@ config PER_VMA_LOCK_STATS overhead in the page fault path. If in doubt, say N. + +config MEM_ALLOC_PROFILING + bool "Enable memory allocation profiling" + default n + depends on MMU + depends on PROC_FS + depends on !DEBUG_FORCE_WEAK_PER_CPU + select CODE_TAGGING + select PAGE_EXTENSION + select SLAB_OBJ_EXT + help + Track allocation source code and record total allocation size + initiated at that code location. The mechanism can be used to track + memory leaks with a low performance and memory impact. + +config MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT + bool "Enable memory allocation profiling by default" + default y + depends on MEM_ALLOC_PROFILING + +config MEM_ALLOC_PROFILING_DEBUG + bool "Memory allocation profiler debugging" + default n + depends on MEM_ALLOC_PROFILING + select MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT + help + Adds warnings with helpful error messages for memory allocation + profiling.mm/Makefile +1
-0@@ -147,3 +147,4 @@ obj-$(CONFIG_SHRINKER_DEBUG) += shrinker_debug.o obj-$(CONFIG_EXECMEM) += execmem.o obj-$(CONFIG_TMPFS_QUOTA) += shmem_quota.o obj-$(CONFIG_LAZY_MMU_MODE_KUNIT_TEST) += tests/lazy_mmu_mode_kunit.o +obj-$(CONFIG_MEM_ALLOC_PROFILING) += alloc_tag.omm/alloc_tag.c renamed from lib/alloc_tag.c +0
-1--
Quoted 2 lines
2.55.0.rc0.799.gd6f94ed593-goog
Thanks, Lorenzo