dm: cache: add dm cache driver
Subsystems (5)
Dinh Nguyen
maintainerv5 cover dm: cache: add dm cache driver
Hi,
This is V4 of the series to add a UCLASS_CACHE dm driver to handling the configuration of cache settings. Place this new driver under /drivers/cache. In this initial revision, the driver is only configuring what I think are essential cache settings. The more comprehensive cache settings can be done in the OS.
Diffs from v4:
- Fix compile error found in sandbox_cache.c
Dinh Nguyen (6):
Documentation: dts: Add pl310 cache controller dts documentation
ARM: pl310: Add macro's for handling tag and data latency mask
dm: cache: Create a uclass for cache
dm: cache: add the pl310 cache controller driver
ARM: socfpga: use the pl310 driver to configure the cache
configs: socfpga: add imply pl310 cache controller
.../devicetree/bindings/arm/l2c2x0.txt | 114 ++++++++++++++++++ arch/arm/Kconfig | 1 + arch/arm/include/asm/pl310.h | 3 + arch/arm/mach-socfpga/misc.c | 16 +-- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/cache/Kconfig | 25 ++++ drivers/cache/Makefile | 4 + drivers/cache/cache-l2x0.c | 76 ++++++++++++ drivers/cache/cache-uclass.c | 24 ++++ drivers/cache/sandbox_cache.c | 34 ++++++ include/cache.h | 38 ++++++ include/dm/uclass-id.h | 1 + test/dm/cache.c | 20 +++ 14 files changed, 346 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/l2c2x0.txt create mode 100644 drivers/cache/Kconfig create mode 100644 drivers/cache/Makefile create mode 100644 drivers/cache/cache-l2x0.c create mode 100644 drivers/cache/cache-uclass.c create mode 100644 drivers/cache/sandbox_cache.c create mode 100644 include/cache.h create mode 100644 test/dm/cache.c
Signature · 1 line
2.20.0
Dinh Nguyen
maintainerPATCH v5 1/6 Documentation: dts: Add pl310 cache controller dts documentation
Linux commit 8ecd7f5970c5 ("ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0")
Linux docs:Documentation/devicetree/bindings/arm/l2c2x0.txt
Copied from Linux kernel v5.0.
"The documentation in the l2cc.txt is specific to the L2 cache controllers L2C210/L2C220/L2C310 (also known as PL210/PL220/PL310 and variants) and not generic as the file name implies. It's not valid for integrated L2 controllers as found in e.g. Cortex-A15/A7/A57/A53."
--- .../devicetree/bindings/arm/l2c2x0.txt | 114 ++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/l2c2x0.txt
Documentation/devicetree/bindings/arm/l2c2x0.txt new file +114 -0
@@ -0,0 +1,114 @@ +* ARM L2 Cache Controller + +ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/ +PL310 and variants) based level 2 cache controller. All these various implementations +of the L2 cache controller have compatible programming models (Note 1). +Some of the properties that are just prefixed "cache-*" are taken from section +3.7.3 of the Devicetree Specification which can be found at: +https://www.devicetree.org/specifications/ + +The ARM L2 cache representation in the device tree should be done as follows: + +Required properties: + +- compatible : should be one of: + "arm,pl310-cache" + "arm,l220-cache" + "arm,l210-cache" + "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an + offset needs to be added to the address before passing down to the L2 + cache controller + "marvell,aurora-system-cache": Marvell Controller designed to be + compatible with the ARM one, with system cache mode (meaning + maintenance operations on L1 are broadcasted to the L2 and L2 + performs the same operation). + "marvell,aurora-outer-cache": Marvell Controller designed to be + compatible with the ARM one with outer cache mode. + "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible + with arm,pl310-cache controller. +- cache-unified : Specifies the cache is a unified cache. +- cache-level : Should be set to 2 for a level 2 cache. +- reg : Physical base address and size of cache controller's memory mapped + registers. + +Optional properties: + +- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of + read, write and setup latencies. Minimum valid values are 1. Controllers + without setup latency control should use a value of 0. +- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of + read, write and setup latencies. Controllers without setup latency control + should use 0. Controllers without separate read and write Tag RAM latency + values should only use the first cell. +- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell. +- arm,filter-ranges : <start length> Starting address and length of window to + filter. Addresses in the filter window are directed to the M1 port. Other + addresses will go to the M0 port. +- arm,io-coherent : indicates that the system is operating in an hardware + I/O coherent mode. Valid only when the arm,pl310-cache compatible + string is used. +- interrupts : 1 combined interrupt. +- cache-size : specifies the size in bytes of the cache +- cache-sets : specifies the number of associativity sets of the cache +- cache-block-size : specifies the size in bytes of a cache block +- cache-line-size : specifies the size in bytes of a line in the cache, + if this is not specified, the line size is assumed to be equal to the + cache block size +- cache-id-part: cache id part number to be used if it is not present + on hardware +- wt-override: If present then L2 is forced to Write through mode +- arm,double-linefill : Override double linefill enable setting. Enable if + non-zero, disable if zero. +- arm,double-linefill-incr : Override double linefill on INCR read. Enable + if non-zero, disable if zero. +- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable + if non-zero, disable if zero. +- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero, + disable if zero. +- arm,prefetch-offset : Override prefetch offset value. Valid values are + 0-7, 15, 23, and 31. +- arm,shared-override : The default behavior of the L220 or PL310 cache + controllers with respect to the shareable attribute is to transform "normal + memory non-cacheable transactions" into "cacheable no allocate" (for reads) + or "write through no write allocate" (for writes). + On systems where this may cause DMA buffer corruption, this property must be + specified to indicate that such transforms are precluded. +- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310). +- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310). +- arm,outer-sync-disable : disable the outer sync operation on the L2 cache. + Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that + will randomly hang unless outer sync operations are disabled. +- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1> + (forcibly enable), property absent (retain settings set by firmware) +- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), + <1> (forcibly enable), property absent (retain settings set by + firmware) +- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly + disable), <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) +- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable), + <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) +- arm,early-bresp-disable : Disable the CA9 optimization Early BRESP (PL310) +- arm,full-line-zero-disable : Disable the CA9 optimization Full line of zero + write (PL310) + +Example: + +L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xfff12000 0x1000>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x80000000 0x8000000>; + cache-unified; + cache-level = <2>; + interrupts = <45>; +}; + +Note 1: The description in this document doesn't apply to integrated L2 + cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These + integrated L2 controllers are assumed to be all preconfigured by + early secure boot code. Thus no need to deal with their configuration + in the kernel at all.
Signature · 1 line
2.20.0
PATCH v5 1/6 Documentation: dts: Add pl310 cache controller dts documentation
Quoted 8 lines · Dinh Nguyen
Linux commit
8ecd7f5970c5("ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0")Linux docs:
Documentation/devicetree/bindings/arm/l2c2x0.txtCopied from Linux kernel v5.0.
Quoted 8 lines
"The documentation in the l2cc.txt is specific to the L2 cache controllers L2C210/L2C220/L2C310 (also known as PL210/PL220/PL310 and variants) and not generic as the file name implies. It's not valid for integrated L2 controllers as found in e.g. Cortex-A15/A7/A57/A53."
Reviewed-by Simon Glass <[email protected]>Signed-off-by Dinh Nguyen <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190506/eba2dd5a/attachment.sig>
Dinh Nguyen
maintainerPATCH v5 2/6 ARM: pl310: Add macro's for handling tag and data latency mask
In reply to Dinh NguyenAdd the PL310 macros for latency control setup, read and write bits.
--- arch/arm/include/asm/pl310.h | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/include/asm/pl310.h +3 -0
@@ -18,6 +18,9 @@#define L310_SHARED_ATT_OVERRIDE_ENABLE (1 << 22)#define L310_AUX_CTRL_DATA_PREFETCH_MASK (1 << 28)#define L310_AUX_CTRL_INST_PREFETCH_MASK (1 << 29) +#define L310_LATENCY_CTRL_SETUP (n) ((n) << 0) +#define L310_LATENCY_CTRL_RD (n) ((n) << 4) +#define L310_LATENCY_CTRL_WR (n) ((n) << 8)#define L2X0_CACHE_ID_PART_MASK (0xf << 6)#define L2X0_CACHE_ID_PART_L310 (3 << 6)
Signature · 1 line
2.20.0
PATCH v5 2/6 ARM: pl310: Add macro's for handling tag and data latency mask
Quoted 5 lines · Dinh Nguyen
Add the PL310 macros for latency control setup, read and write bits.
Reviewed-by Marek Vasut <[email protected]>Reviewed-by Simon Glass <[email protected]>Signed-off-by Dinh Nguyen <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190506/e7fccb63/attachment.sig>
Dinh Nguyen
maintainerPATCH v5 3/6 dm: cache: Create a uclass for cache
In reply to Dinh NguyenThe cache UCLASS will be used for configure settings that can be found in a CPU's L2 cache controller.
Add a uclass and a test for cache.
---
v5: fix compile error for sandbox_cache.c
v4: re-order includes and add Reviewed-by:
v3: Add cache_get_info() to check for non-zero value
Add comments to cache_info struct
v2: separate out uclass patch from driver and add test
--- drivers/Kconfig | 2 ++ drivers/Makefile | 1 + drivers/cache/Kconfig | 16 +++++++++++++++ drivers/cache/Makefile | 3 +++ drivers/cache/cache-uclass.c | 24 ++++++++++++++++++++++ drivers/cache/sandbox_cache.c | 34 +++++++++++++++++++++++++++++++ include/cache.h | 38 +++++++++++++++++++++++++++++++++++ include/dm/uclass-id.h | 1 + test/dm/cache.c | 20 ++++++++++++++++++ 9 files changed, 139 insertions(+) create mode 100644 drivers/cache/Kconfig create mode 100644 drivers/cache/Makefile create mode 100644 drivers/cache/cache-uclass.c create mode 100644 drivers/cache/sandbox_cache.c create mode 100644 include/cache.h create mode 100644 test/dm/cache.c
drivers/Kconfig +2 -0
@@ -14,6 +14,8 @@ source "drivers/block/Kconfig" source "drivers/bootcount/Kconfig" +source "drivers/cache/Kconfig" + source "drivers/clk/Kconfig" source "drivers/cpu/Kconfig"
drivers/Makefile +1 -0
@@ -77,6 +77,7 @@ obj-$(CONFIG_BIOSEMU) += bios_emulator/ obj-y += block/ obj-y += board/ obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/ +obj-y += cache/ obj-$(CONFIG_CPU) += cpu/ obj-y += crypto/ obj-$(CONFIG_FASTBOOT) += fastboot/
drivers/cache/Kconfig new file +16 -0
@@ -0,0 +1,16 @@ +# +# Cache controllers +# + +menu "Cache Controller drivers" + +config CACHE + bool "Enable Driver Model for Cache controllers" + depends on DM + help + Enable driver model for cache controllers that are found on + most CPU's. Cache is memory that the CPU can access directly and + is usually located on the same chip. This uclass can be used for + configuring settings that be found from a device tree file. + +endmenu
drivers/cache/Makefile new file +3 -0
@@ -0,0 +1,3 @@ + +obj-$(CONFIG_CACHE) += cache-uclass.o +obj-$(CONFIG_SANDBOX) += sandbox_cache.o
drivers/cache/cache-uclass.c new file +24 -0
@@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +*/ + +#include <common.h> +#include <cache.h> +#include <dm.h> + +int cache_get_info (struct udevice *dev,struct cache_info *info) +{ +struct cache_ops *ops =cache_get_ops (dev); + +if (!ops->get_info) +return -ENOSYS ; + +return ops->get_info (dev, info); +} + +UCLASS_DRIVER (cache) = { + .id =UCLASS_CACHE , + .name ="cache" , + .post_bind = dm_scan_fdt_dev, +};
drivers/cache/sandbox_cache.c new file +34 -0
@@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +*/ + +#include <common.h> +#include <cache.h> +#include <dm.h> +#include <errno.h> + +DECLARE_GLOBAL_DATA_PTR ; + +static int sandbox_get_info (struct udevice *dev,struct cache_info *info) +{ + info->base =0x11223344 ; + +return 0 ; +} + +static const struct cache_ops sandbox_cache_ops = { + .get_info = sandbox_get_info, +}; + +static const struct udevice_id sandbox_cache_ids[] = { + { .compatible ="sandbox,cache" }, + { } +}; + +U_BOOT_DRIVER (cache_sandbox) = { + .name ="cache_sandbox" , + .id =UCLASS_CACHE , + .of_match = sandbox_cache_ids, + .ops = &sandbox_cache_ops, +};
include/cache.h new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +*/ + +#ifndef __CACHE_H +#define __CACHE_H + +/* +* Structure for the cache controller +*/ +struct cache_info { +phys_addr_t base;/* Base physical address of cache device. */ +}; + +struct cache_ops { +/** +* get_info() - Get basic cache info +* +* @dev: Device to check (UCLASS_CACHE) +* @info: Place to put info +* @return 0 if OK, -ve on error +*/ +int (*get_info)(struct udevice *dev,struct cache_info *info); +}; + +#define cache_get_ops (dev) ((struct cache_ops *)(dev)->driver->ops) + +/** +* cache_get_info() - Get information about a cache controller +* +* @dev: Device to check (UCLASS_CACHE) +* @info: Returns cache info +* @return 0 if OK, -ve on error +*/ +int cache_get_info (struct udevice *dev,struct cache_info *info); + +#endif
include/dm/uclass-id.h +1 -0
@@ -34,6 +34,7 @@ enum uclass_id {UCLASS_BLK ,/* Block device */ UCLASS_BOARD ,/* Device information from hardware */ UCLASS_BOOTCOUNT ,/* Bootcount backing store */ +UCLASS_CACHE ,/* Cache controller */ UCLASS_CLK ,/* Clock source, e.g. used by peripherals */ UCLASS_CPU ,/* CPU, typically part of an SoC */ UCLASS_CROS_EC, /* Chrome OS EC */
test/dm/cache.c new file +20 -0
@@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +*/ + +#include <common.h> +#include <dm.h> +#include <dm/test.h> + +static int dm_test_reset (struct unit_test_state *uts) +{ +struct udevice *dev_cache; +struct cache_info ; + +ut_assertok (uclass_get_device (UCLASS_CACHE ,0 , &dev_cache)); +ut_assertok (cache_get_info (dev, &info)); + +return 0 ; +} +DM_TEST (dm_test_reset,DM_TESTF_SCAN_FDT );
Signature · 1 line
2.20.0
PATCH v5 3/6 dm: cache: Create a uclass for cache
Quoted 7 lines · Dinh Nguyen
The cache UCLASS will be used for configure settings that can be found in a CPU's L2 cache controller.
Add a uclass and a test for cache.
Reviewed-by Simon Glass <[email protected]>Signed-off-by Dinh Nguyen <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190506/265db913/attachment.sig>
Dinh Nguyen
maintainerPATCH v5 4/6 dm: cache: add the pl310 cache controller driver
In reply to Dinh NguyenAdd a PL310 cache controller driver that is usually found on ARMv7(32-bit) devices. The driver configures the cache settings that can be found in the device tree files.
This initial revision only configures basic settings(data & instruction prefetch, shared-override, data & tag latency). I believe these are the settings that affect performance the most. Comprehensive settings can be done by the OS.
---
v4: no change
v3: Add Reviewed-by and fix nits
v2: split out patch and address comments from Simon Glass
--- drivers/cache/Kconfig | 9 +++++ drivers/cache/Makefile | 1 + drivers/cache/cache-l2x0.c | 76 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 86 insertions(+) create mode 100644 drivers/cache/cache-l2x0.c
drivers/cache/Kconfig +9 -0
@@ -13,4 +13,13 @@ config CACHE is usually located on the same chip. This uclass can be used for configuring settings that be found from a device tree file. +config L2X0_CACHE + tristate "PL310 cache driver" + select CACHE + depends on ARM + help + This driver is for the PL310 cache controller commonly found on + ARMv7(32-bit) devices. The driver configures the cache settings + found in the device tree. + endmenu
drivers/cache/Makefile +1 -0
@@ -1,3 +1,4 @@ obj-$(CONFIG_CACHE) += cache-uclass.o obj-$(CONFIG_SANDBOX) += sandbox_cache.o +obj-$(CONFIG_L2X0_CACHE) += cache-l2x0.o
drivers/cache/cache-l2x0.c new file +76 -0
76 lines not on this page · raw message
Signature · 1 line
2.20.0
PATCH v5 4/6 dm: cache: add the pl310 cache controller driver
Quoted 11 lines · Dinh Nguyen
Add a PL310 cache controller driver that is usually found on ARMv7(32-bit) devices. The driver configures the cache settings that can be found in the device tree files.
This initial revision only configures basic
settings(data & instruction prefetch, shared-override, data & tag latency). I believe these are the settings that affect performance the most. Comprehensive settings can be done by the OS.Reviewed-by Simon Glass <[email protected]>Signed-off-by Dinh Nguyen <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190506/ffb6e8db/attachment.sig>
Dinh Nguyen
maintainerPATCH v5 5/6 ARM: socfpga: use the pl310 driver to configure the cache
In reply to Dinh NguyenFind the UCLASS_CACHE driver to configure the cache controller's settings.
--- arch/arm/mach-socfpga/misc.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-)
arch/arm/mach-socfpga/misc.c +3 -13
@@ -59,20 +59,10 @@ void enable_caches(void)#ifdef CONFIG_SYS_L2_PL310 void v7_outer_cache_enable (void ) { -/* Disable the L2 cache */ -clrbits_le32 (&pl310->pl310_ctrl,L2X0_CTRL_EN ); - -writel (0x0 , &pl310->pl310_tag_latency_ctrl); -writel (0x10 , &pl310->pl310_data_latency_ctrl); - -/* enable BRESP, instruction and data prefetch, full line of zeroes */ -setbits_le32 (&pl310->pl310_aux_ctrl, -L310_AUX_CTRL_DATA_PREFETCH_MASK | -L310_AUX_CTRL_INST_PREFETCH_MASK | -L310_SHARED_ATT_OVERRIDE_ENABLE ); +struct udevice *dev; -/* Enable the L2 cache */ -setbits_le32 (&pl310->pl310_ctrl,L2X0_CTRL_EN ); +if (uclass_get_device (UCLASS_CACHE ,0 , &dev)) +pr_err ("cache controller driver NOT found!\n" ); }void v7_outer_cache_disable (void )
Signature · 1 line
2.20.0
PATCH v5 5/6 ARM: socfpga: use the pl310 driver to configure the cache
Quoted 6 lines · Dinh Nguyen
Find the
UCLASS_CACHEdriver to configure the cache controller's settings.Reviewed-by Marek Vasut <[email protected]>Reviewed-by Simon Glass <[email protected]>Signed-off-by Dinh Nguyen <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190506/5e508662/attachment.sig>
Dinh Nguyen
maintainerPATCH v5 6/6 configs: socfpga: add imply pl310 cache controller
In reply to Dinh NguyenSelect the PL310 UCLASS_CACHE driver for SoCFPGA.
--- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/Kconfig +1 -0
@@ -845,6 +845,7 @@ config ARCH_SOCFPGA imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE imply SPL_SPI_FLASH_SUPPORT imply SPL_SPI_SUPPORT + imply L2X0_CACHE config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs"
Signature · 1 line
2.20.0
PATCH v5 6/6 configs: socfpga: add imply pl310 cache controller
Quoted 5 lines · Dinh Nguyen
Select the PL310
UCLASS_CACHEdriver for SoCFPGA.Reviewed-by Marek Vasut <[email protected]>Reviewed-by Simon Glass <[email protected]>Signed-off-by Dinh Nguyen <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190506/682fc8d9/attachment.sig>
v5 cover dm: cache: add dm cache driver
In reply to Dinh NguyenQuoted 10 lines · Dinh Nguyen
Hi,
This is V4 of the series to add a
UCLASS_CACHEdm driver to handling the configuration of cache settings. Place this new driver under /drivers/cache. In this initial revision, the driver is only configuring what I think are essential cache settings. The more comprehensive cache settings can be done in the OS.Diffs from v4:
- Fix compile error found insandbox_cache.c
Thanks. I'd greatly appreciate it if you can throw this whole series at travis (or just do a world build locally) and report back that everything is OK now.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190423/b35ff22b/attachment.sig>
Dinh Nguyen
maintainerv5 cover dm: cache: add dm cache driver
Quoted 9 lines · Tom Rini
Quoted 8 lines · Dinh Nguyen
Hi,
This is V4 of the series to add a
UCLASS_CACHEdm driver to handling the configuration of cache settings. Place this new driver under /drivers/cache. In this initial revision, the driver is only configuring what I think are essential cache settings. The more comprehensive cache settings can be done in the OS.
Quoted 7 lines
Quoted 2 lines
Diffs from v4:
- Fix compile error found insandbox_cache.cThanks. I'd greatly appreciate it if you can throw this whole series at travis (or just do a world build locally) and report back that everything is OK now.
Will do. By a "world build", you mean using buildman for all architectures right?
Dinh
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190424/eb523ce3/attachment.sig>
v5 cover dm: cache: add dm cache driver
Quoted 15 lines · Dinh Nguyen
Quoted 12 lines · Tom Rini
Quoted 10 lines · Dinh Nguyen
Hi,
This is V4 of the series to add a
UCLASS_CACHEdm driver to handling the configuration of cache settings. Place this new driver under /drivers/cache. In this initial revision, the driver is only configuring what I think are essential cache settings. The more comprehensive cache settings can be done in the OS.Diffs from v4:
- Fix compile error found insandbox_cache.c
Quoted 7 lines
Quoted 4 lines
Thanks. I'd greatly appreciate it if you can throw this whole series at travis (or just do a world build locally) and report back that everything is OK now.
Will do. By a "world build", you mean using buildman for all architectures right?
Yes. buildman can fetch a valid toolchain for everything I think (and there's a documented location in .travis.yml for the maybe 1-2 that it doesn't) and then build everything.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190424/95b64c0c/attachment.sig>
Dinh Nguyen
maintainerv5 cover dm: cache: add dm cache driver
Quoted 21 lines · Tom Rini
Quoted 20 lines · Dinh Nguyen
Quoted 16 lines · Tom Rini
Quoted 10 lines · Dinh Nguyen
Hi,
This is V4 of the series to add a
UCLASS_CACHEdm driver to handling the configuration of cache settings. Place this new driver under /drivers/cache. In this initial revision, the driver is only configuring what I think are essential cache settings. The more comprehensive cache settings can be done in the OS.Diffs from v4:
- Fix compile error found insandbox_cache.cThanks. I'd greatly appreciate it if you can throw this whole series at travis (or just do a world build locally) and report back that everything is OK now.
Quoted 7 lines
Quoted 2 lines
Will do. By a "world build", you mean using buildman for all architectures right?
Yes. buildman can fetch a valid toolchain for everything I think (and there's a documented location in .travis.yml for the maybe 1-2 that it doesn't) and then build everything.
buildman just completed and it did not report any errors for this series of patches.
Dinh
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190424/d0a441aa/attachment.sig>
v5 cover dm: cache: add dm cache driver
Quoted 27 lines · Dinh Nguyen
Quoted 24 lines · Tom Rini
Quoted 22 lines · Dinh Nguyen
Quoted 9 lines · Tom Rini
Quoted 8 lines · Dinh Nguyen
Hi,
This is V4 of the series to add a
UCLASS_CACHEdm driver to handling the configuration of cache settings. Place this new driver under /drivers/cache. In this initial revision, the driver is only configuring what I think are essential cache settings. The more comprehensive cache settings can be done in the OS.Quoted 7 lines
Quoted 2 lines
Diffs from v4:
- Fix compile error found insandbox_cache.cThanks. I'd greatly appreciate it if you can throw this whole series at travis (or just do a world build locally) and report back that everything is OK now.
Will do. By a "world build", you mean using buildman for all architectures right?
Quoted 7 lines
Quoted 4 lines
Yes. buildman can fetch a valid toolchain for everything I think (and there's a documented location in .travis.yml for the maybe 1-2 that it doesn't) and then build everything.
buildman just completed and it did not report any errors for this series of patches.
Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190424/52f020b7/attachment.sig>