Skip to contentSkip to conversation

: Headphone and Front Mic are switched

ALSA - driver 0001209 [email protected] 1 participant 1 message Jun 26, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1209>
======================================================================

Reported By:                alfred-ganz
Assigned To:                tiwai
======================================================================
Project:                    ALSA - driver
Issue ID:                   1209
Category:                   PCI - hda-intel
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     assigned
Distribution:               
Kernel Version:             
======================================================================
Date Submitted:             06-23-2005 20:02 CEST
Last Modified:              06-26-2005 20:10 CEST

======================================================================
Summary: Headphone and Front Mic are switched
Description:
I installed alsa-driver-1.0.9b.tar.bz2, and the back panel assignments that I can test seem to be assigned properly. However, there is some sound coming out of the front mike jack, and input is accepted through the headphone jack. Since these jacks work as expected with Windows XP, I suspect that they are misassigned in the driver.
Hardware: RealTek ALC655 AC'97 with ALC880(D)

Please let me know if there is anything else that you need from me.

Thank you, AG

======================================================================

----------------------------------------------------------------------
alfred-ganz - 06-26-05 04:29
----------------------------------------------------------------------
Here is /proc/asound/card0/codec#2 from the modified version of alsa-kernel/pci/hda/patch_realtek.c. Note that everything seems to be almost as expected and rather complete. The only "mismatch" is that the machine manual calls the mixer (0x0d) associated with node 0x15 "Rear Surround", and of course the assignments for node 0x19 and 0x1b are reversed from those for the current 5stack model, and the audio selector nodes 0x10 through 0x13 are used differently.

Here goes:
##################
Codec: Realtek ALC880
Address: 2
Vendor Id: 0x10ec0880
Subsystem Id: 0x0
Revision Id: 0x90500
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x04 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x05 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
PCM: rates 0x160, bits 0x1e, types 0x1
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
0x80] [0x80 0x80] [0x80 0x80]
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 7

     0x18* 0x19 0x1a 0x1b 0x1c 0x14 0x15

Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
0x80] [0x80 0x80] [0x80 0x80]
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 7

     0x18* 0x19 0x1a 0x1b 0x1c 0x14 0x15

Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 10

     0x18 0x19* 0x1a 0x1b 0x1c 0x0b 0x14 0x15 0x16 0x17
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
  PCM: rates 0x160, bits 0x1e, types 0x1
  Connection: 1
     0x1f

Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1 Amp-In vals: [0x2e 0x2e] [0x30 0x30] [0x25 0x25] [0x25 0x25] [0x80
0x80] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3]
Connection: 8

     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15

Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x1f 0x1f]
Connection: 2

     0x02 0x0b

Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x1d 0x1d]
Connection: 2

     0x03 0x0b

Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 2

     0x04 0x0b

Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 2

     0x05 0x0b
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f

Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x083f: IN OUT HP
Pin Default 0x01014020: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1

     0x0c

Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x083f: IN OUT HP
Pin Default 0x01011021: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1

     0x0d

Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x083f: IN OUT HP
Pin Default 0x01016022: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
Pin-ctls: 0x40: OUT
Connection: 1

     0x0e

Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x083f: IN OUT HP
Pin Default 0x01012023: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
Pin-ctls: 0x00:
Connection: 1

     0x0f

Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x08133f: IN OUT HP Pin Default 0x01a19040: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x00:
Connection: 1

     0x10

Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP
Pin Default 0x02af9160: [Jack] Mic at Ext Front
Conn = Other, Color = Pink
Pin-ctls: 0x20: IN
Connection: 1

     0x11

Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP
Pin Default 0x01813030: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x21: IN
Connection: 1

     0x12

Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP
Pin Default 0x022f4150: [Jack] HP Out at Ext Front
Conn = Other, Color = Green
Pin-ctls: 0x21: IN
Connection: 1

     0x13

Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x99331070: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x40000000: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x40000000: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1

     0x06

Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x0820: IN
Pin Default 0x40000000: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
######################

----------------------------------------------------------------------
alfred-ganz - 06-26-05 20:10
----------------------------------------------------------------------
After some scrounging around in alsa-kernel/pci/hda/patch_realtek.c, I have come to the conclusion that although I don't believe there is any access to digital output on my system, the proper model to use is 6statack-digout (Watch the spelling, I don't presume this was intended!). With this model selected as option, everything seems to fall into place.

Unfortunately the PCI code on my system doesn't yet recognize Class 0x0403,
but otherwise, here is the output from scanpci -vv for the device:
pci bus 0x0000 cardnum 0x1b function 0x00: vendor 0x8086 device 0x2668
Intel Corp. Device unknown
CardVendor 0x1019 card 0xa884 (Card unknown)

  STATUS    0x0010  COMMAND 0x0006
  CLASS     0x04 0x03 0x00  REVISION 0x04
  BIST      0x00  HEADER 0x00  LATENCY 0x00  CACHE 0x08
  BASE0     0x00000000fbe38004  addr 0x00000000fbe38000  MEM 64BIT
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x01  INT_LINE 0x0a
  BYTE_0    0x03  BYTE_1  0x00  BYTE_2  0x00  BYTE_3  0x00

The vendor and device numbers seem to match the corresponding entries in the
table in the code. It would be interesting to know why the device isn't properly recognized.

Issue History
Date Modified Username Field Change
======================================================================

06-23-05 20:02 alfred-ganz    New Issue                                    
06-23-05 22:35 alfred-ganz    Note Added: 0005195                          
06-23-05 23:21 alfred-ganz    Note Added: 0005197                          
06-23-05 23:29 erik           Note Added: 0005198                          
06-23-05 23:55 alfred-ganz    Note Added: 0005201                          
06-24-05 11:13 tiwai          Note Added: 0005211                          
06-24-05 15:42 alfred-ganz    Note Added: 0005229                          
06-24-05 15:46 tiwai          Note Added: 0005230                          
06-24-05 16:07 alfred-ganz    Note Added: 0005231                          
06-24-05 16:34 tiwai          Note Added: 0005234                          
06-24-05 16:42 alfred-ganz    Note Added: 0005235                          
06-24-05 16:54 alfred-ganz    Note Added: 0005236                          
06-24-05 17:26 alfred-ganz    Note Added: 0005240                          
06-24-05 17:48 tiwai          Note Added: 0005243                          
06-24-05 19:14 alfred-ganz    Note Added: 0005250                          
06-24-05 20:01 alfred-ganz    Note Added: 0005251                          
06-24-05 20:07 tiwai          Note Added: 0005252                          
06-24-05 21:12 alfred-ganz    Note Added: 0005253                          
06-24-05 21:54 alfred-ganz    Note Added: 0005254                          
06-25-05 21:28 alfred-ganz    Note Added: 0005258                          
06-26-05 04:29 alfred-ganz    Note Added: 0005260                          
06-26-05 20:10 alfred-ganz    Note Added: 0005266                          

======================================================================

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click